{"title":"Solid Carbide Roughing End Mills","description":"\u003cp\u003eSolid carbide roughing end mills from HTC Mfg., made in the USA. The knuckle profile breaks the chip into short pieces, which cuts the cutting force and lets the tool take a far heavier cut than a plain end mill.\u003c\/p\u003e\u003cp\u003eFine and medium pitch, 25° to 45° helix, including series for aluminum and for titanium.\u003c\/p\u003e","products":[{"product_id":"313-0512","title":"1\/4\" End Mill HOG Mill Single End. Medium Pitch Knuckle Rougher. 25 Degree Helix. Chamfer Width .020\" - Shank OD 1\/4\" LOC 3\/4\" OAL 2-1\/2\" - 3 Flutes - Uncoated","description":"\u003cp\u003e\u003cstrong\u003e1\/4\" cutting diameter, 3 flutes, single end, uncoated.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eGround from solid carbide. This tool cuts 1\/4\" diameter, runs a 1\/4\" shank, has 3\/4\" of flute and measures 2-1\/2\" overall. The flutes are cut at a 25° helix.\u003c\/p\u003e\u003cp\u003eThis is a rougher: the chip-breaking edge form cuts the cutting pressure and breaks the chip into short pieces, so it removes stock faster than a finishing tool at the same power.\u003c\/p\u003e\u003cp\u003eUncoated, so the edge stays as sharp as it can be ground — the usual choice for aluminum and other soft, sticky materials.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting diameter:\u003c\/strong\u003e 1\/4\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank diameter:\u003c\/strong\u003e 1\/4\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of cut (LOC):\u003c\/strong\u003e 3\/4\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall length (OAL):\u003c\/strong\u003e 2-1\/2\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlutes:\u003c\/strong\u003e 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd type:\u003c\/strong\u003e Single End\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix angle:\u003c\/strong\u003e 25°\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting style:\u003c\/strong\u003e Roughing \/ chip-breaking\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating:\u003c\/strong\u003e Uncoated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool material:\u003c\/strong\u003e Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e 313\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem number:\u003c\/strong\u003e 313-0512\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"fm-dispatch-notice\"\u003e\n\u003ch3\u003eAvailability and Shipping\u003c\/h3\u003e\n\u003cp\u003eFor HTC carbide tools, if the uncoated tool is available and coating is needed, estimated time to ship is 3–4 business days. If the tool is not in stock, estimated time to ship is 7–10 calendar days. For items that require manufacturing, contact us for a confirmed estimated ship date.\u003c\/p\u003e\n\u003cp\u003eUnless stated otherwise, estimated time to ship is measured in calendar days, from order placement until your order is handed to the carrier. Carrier transit time is additional. Orders may ship sooner. We accept orders awaiting replenishment; please contact us before ordering if you need a specific shipping date.\u003c\/p\u003e\n\u003cp\u003eSee our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e for details.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"HTC Mfg.","offers":[{"title":"313-0512 \/ 313 \/ Uncoated","offer_id":40353118159034,"sku":"313-0512","price":45.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0283\/9796\/1325\/products\/Series_313.png?v=1793587818"},{"product_id":"313-0612","title":"1\/4\" End Mill HOG Mill Single End. Medium Pitch Knuckle Rougher. 25 Degree Helix. Chamfer Width .020\" - Shank OD 1\/4\" LOC 3\/4\" OAL 2-1\/2\" - 3 Flutes - Uncoated","description":"\u003cp\u003e\u003cstrong\u003e1\/4\" cutting diameter, 3 flutes, single end, uncoated.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eGround from solid carbide. This tool cuts 1\/4\" diameter, runs a 1\/4\" shank, has 3\/4\" of flute and measures 2-1\/2\" overall. The flutes are cut at a 25° helix.\u003c\/p\u003e\u003cp\u003eThis is a rougher: the chip-breaking edge form cuts the cutting pressure and breaks the chip into short pieces, so it removes stock faster than a finishing tool at the same power.\u003c\/p\u003e\u003cp\u003eUncoated, so the edge stays as sharp as it can be ground — the usual choice for aluminum and other soft, sticky materials.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting diameter:\u003c\/strong\u003e 1\/4\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank diameter:\u003c\/strong\u003e 1\/4\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of cut (LOC):\u003c\/strong\u003e 3\/4\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall length (OAL):\u003c\/strong\u003e 2-1\/2\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlutes:\u003c\/strong\u003e 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd type:\u003c\/strong\u003e Single End\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix angle:\u003c\/strong\u003e 25°\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting style:\u003c\/strong\u003e Roughing \/ chip-breaking\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating:\u003c\/strong\u003e Uncoated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool material:\u003c\/strong\u003e Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e 313\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem number:\u003c\/strong\u003e 313-0612\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"fm-dispatch-notice\"\u003e\n\u003ch3\u003eAvailability and Shipping\u003c\/h3\u003e\n\u003cp\u003eFor HTC carbide tools, if the uncoated tool is available and coating is needed, estimated time to ship is 3–4 business days. If the tool is not in stock, estimated time to ship is 7–10 calendar days. For items that require manufacturing, contact us for a confirmed estimated ship date.\u003c\/p\u003e\n\u003cp\u003eUnless stated otherwise, estimated time to ship is measured in calendar days, from order placement until your order is handed to the carrier. Carrier transit time is additional. Orders may ship sooner. We accept orders awaiting replenishment; please contact us before ordering if you need a specific shipping date.\u003c\/p\u003e\n\u003cp\u003eSee our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e for details.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"HTC Mfg.","offers":[{"title":"313-0612 \/ 313 \/ Uncoated","offer_id":40353118257338,"sku":"313-0612","price":49.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0283\/9796\/1325\/products\/Series_313_6f0a508b-9d6e-463a-94f0-04b86f960301.png?v=1793587819"},{"product_id":"313-0516","title":"5\/16\" End Mill HOG Mill Single End. Medium Pitch Knuckle Rougher. 25 Degree Helix. Chamfer Width .020\" - Shank OD 5\/16\" LOC 7\/16\" OAL 2-1\/2\" - 3 Flutes - Uncoated","description":"\u003cp\u003e\u003cstrong\u003e5\/16\" cutting diameter, 3 flutes, single end, uncoated.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eGround from solid carbide. This tool cuts 5\/16\" diameter, runs a 5\/16\" shank, has 7\/16\" of flute and measures 2-1\/2\" overall. The flutes are cut at a 25° helix.\u003c\/p\u003e\u003cp\u003eThis is a rougher: the chip-breaking edge form cuts the cutting pressure and breaks the chip into short pieces, so it removes stock faster than a finishing tool at the same power.\u003c\/p\u003e\u003cp\u003eUncoated, so the edge stays as sharp as it can be ground — the usual choice for aluminum and other soft, sticky materials.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting diameter:\u003c\/strong\u003e 5\/16\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank diameter:\u003c\/strong\u003e 5\/16\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of cut (LOC):\u003c\/strong\u003e 7\/16\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall length (OAL):\u003c\/strong\u003e 2-1\/2\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlutes:\u003c\/strong\u003e 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd type:\u003c\/strong\u003e Single End\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix angle:\u003c\/strong\u003e 25°\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting style:\u003c\/strong\u003e Roughing \/ chip-breaking\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating:\u003c\/strong\u003e Uncoated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool material:\u003c\/strong\u003e Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e 313\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem number:\u003c\/strong\u003e 313-0516\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"fm-dispatch-notice\"\u003e\n\u003ch3\u003eAvailability and Shipping\u003c\/h3\u003e\n\u003cp\u003eFor HTC carbide tools, if the uncoated tool is available and coating is needed, estimated time to ship is 3–4 business days. If the tool is not in stock, estimated time to ship is 7–10 calendar days. For items that require manufacturing, contact us for a confirmed estimated ship date.\u003c\/p\u003e\n\u003cp\u003eUnless stated otherwise, estimated time to ship is measured in calendar days, from order placement until your order is handed to the carrier. Carrier transit time is additional. Orders may ship sooner. We accept orders awaiting replenishment; please contact us before ordering if you need a specific shipping date.\u003c\/p\u003e\n\u003cp\u003eSee our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e for details.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"HTC Mfg.","offers":[{"title":"313-0516 \/ 313 \/ Uncoated","offer_id":40353118290106,"sku":"313-0516","price":49.04,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0283\/9796\/1325\/products\/Series_313_1b73e947-1aea-4483-b1a2-86a10eeea238.png?v=1793587819"},{"product_id":"313-0616","title":"5\/16\" End Mill HOG Mill Single End. Medium Pitch Knuckle Rougher. 25 Degree Helix. Chamfer Width .020\" - Shank OD 5\/16\" LOC 13\/16\" OAL 2-1\/2\" - 3 Flutes - Uncoated","description":"\u003cp\u003e\u003cstrong\u003e5\/16\" cutting diameter, 3 flutes, single end, uncoated.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eGround from solid carbide. This tool cuts 5\/16\" diameter, runs a 5\/16\" shank, has 13\/16\" of flute and measures 2-1\/2\" overall. The flutes are cut at a 25° helix.\u003c\/p\u003e\u003cp\u003eThis is a rougher: the chip-breaking edge form cuts the cutting pressure and breaks the chip into short pieces, so it removes stock faster than a finishing tool at the same power.\u003c\/p\u003e\u003cp\u003eUncoated, so the edge stays as sharp as it can be ground — the usual choice for aluminum and other soft, sticky materials.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting diameter:\u003c\/strong\u003e 5\/16\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank diameter:\u003c\/strong\u003e 5\/16\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of cut (LOC):\u003c\/strong\u003e 13\/16\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall length (OAL):\u003c\/strong\u003e 2-1\/2\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlutes:\u003c\/strong\u003e 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd type:\u003c\/strong\u003e Single End\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix angle:\u003c\/strong\u003e 25°\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting style:\u003c\/strong\u003e Roughing \/ chip-breaking\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating:\u003c\/strong\u003e Uncoated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool material:\u003c\/strong\u003e Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e 313\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem number:\u003c\/strong\u003e 313-0616\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"fm-dispatch-notice\"\u003e\n\u003ch3\u003eAvailability and Shipping\u003c\/h3\u003e\n\u003cp\u003eFor HTC carbide tools, if the uncoated tool is available and coating is needed, estimated time to ship is 3–4 business days. If the tool is not in stock, estimated time to ship is 7–10 calendar days. For items that require manufacturing, contact us for a confirmed estimated ship date.\u003c\/p\u003e\n\u003cp\u003eUnless stated otherwise, estimated time to ship is measured in calendar days, from order placement until your order is handed to the carrier. Carrier transit time is additional. Orders may ship sooner. We accept orders awaiting replenishment; please contact us before ordering if you need a specific shipping date.\u003c\/p\u003e\n\u003cp\u003eSee our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e for details.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"HTC Mfg.","offers":[{"title":"313-0616 \/ 313 \/ Uncoated","offer_id":40353118355642,"sku":"313-0616","price":55.11,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0283\/9796\/1325\/products\/Series_313_aca15132-2b7d-457b-b20e-8196afc71126.png?v=1793587819"},{"product_id":"313-0520","title":"3\/8\" End Mill HOG Mill Single End. Medium Pitch Knuckle Rougher. 25 Degree Helix. Chamfer Width .020\" - Shank OD 3\/8\" LOC 1\/2\" OAL 2-1\/2\" - 4 Flutes - Uncoated","description":"\u003cp\u003e\u003cstrong\u003e3\/8\" cutting diameter, 4 flutes, single end, uncoated.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eGround from solid carbide. This tool cuts 3\/8\" diameter, runs a 3\/8\" shank, has 1\/2\" of flute and measures 2-1\/2\" overall. The flutes are cut at a 25° helix.\u003c\/p\u003e\u003cp\u003eThis is a rougher: the chip-breaking edge form cuts the cutting pressure and breaks the chip into short pieces, so it removes stock faster than a finishing tool at the same power.\u003c\/p\u003e\u003cp\u003eUncoated, so the edge stays as sharp as it can be ground — the usual choice for aluminum and other soft, sticky materials.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting diameter:\u003c\/strong\u003e 3\/8\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank diameter:\u003c\/strong\u003e 3\/8\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of cut (LOC):\u003c\/strong\u003e 1\/2\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall length (OAL):\u003c\/strong\u003e 2-1\/2\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlutes:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd type:\u003c\/strong\u003e Single End\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix angle:\u003c\/strong\u003e 25°\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting style:\u003c\/strong\u003e Roughing \/ chip-breaking\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating:\u003c\/strong\u003e Uncoated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool material:\u003c\/strong\u003e Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e 313\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem number:\u003c\/strong\u003e 313-0520\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"fm-dispatch-notice\"\u003e\n\u003ch3\u003eAvailability and Shipping\u003c\/h3\u003e\n\u003cp\u003eFor HTC carbide tools, if the uncoated tool is available and coating is needed, estimated time to ship is 3–4 business days. If the tool is not in stock, estimated time to ship is 7–10 calendar days. For items that require manufacturing, contact us for a confirmed estimated ship date.\u003c\/p\u003e\n\u003cp\u003eUnless stated otherwise, estimated time to ship is measured in calendar days, from order placement until your order is handed to the carrier. Carrier transit time is additional. Orders may ship sooner. We accept orders awaiting replenishment; please contact us before ordering if you need a specific shipping date.\u003c\/p\u003e\n\u003cp\u003eSee our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e for details.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"HTC Mfg.","offers":[{"title":"313-0520 \/ 313 \/ Uncoated","offer_id":40353119502522,"sku":"313-0520","price":63.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0283\/9796\/1325\/products\/Series_313_1c075c0b-5494-4a58-86a9-73a93b5fae25.png?v=1793587819"},{"product_id":"313-0620","title":"3\/8\" End Mill HOG Mill Single End. Medium Pitch Knuckle Rougher. 25 Degree Helix. Chamfer Width .020\" - Shank OD 3\/8\" LOC 1\" OAL 2-1\/2\" - 4 Flutes - Uncoated","description":"\u003cp\u003e\u003cstrong\u003e3\/8\" cutting diameter, 4 flutes, single end, uncoated.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eGround from solid carbide. This tool cuts 3\/8\" diameter, runs a 3\/8\" shank, has 1\" of flute and measures 2-1\/2\" overall. The flutes are cut at a 25° helix.\u003c\/p\u003e\u003cp\u003eThis is a rougher: the chip-breaking edge form cuts the cutting pressure and breaks the chip into short pieces, so it removes stock faster than a finishing tool at the same power.\u003c\/p\u003e\u003cp\u003eUncoated, so the edge stays as sharp as it can be ground — the usual choice for aluminum and other soft, sticky materials.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting diameter:\u003c\/strong\u003e 3\/8\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank diameter:\u003c\/strong\u003e 3\/8\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of cut (LOC):\u003c\/strong\u003e 1\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall length (OAL):\u003c\/strong\u003e 2-1\/2\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlutes:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd type:\u003c\/strong\u003e Single End\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix angle:\u003c\/strong\u003e 25°\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting style:\u003c\/strong\u003e Roughing \/ chip-breaking\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating:\u003c\/strong\u003e Uncoated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool material:\u003c\/strong\u003e Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e 313\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem number:\u003c\/strong\u003e 313-0620\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"fm-dispatch-notice\"\u003e\n\u003ch3\u003eAvailability and Shipping\u003c\/h3\u003e\n\u003cp\u003eFor HTC carbide tools, if the uncoated tool is available and coating is needed, estimated time to ship is 3–4 business days. If the tool is not in stock, estimated time to ship is 7–10 calendar days. For items that require manufacturing, contact us for a confirmed estimated ship date.\u003c\/p\u003e\n\u003cp\u003eUnless stated otherwise, estimated time to ship is measured in calendar days, from order placement until your order is handed to the carrier. Carrier transit time is additional. Orders may ship sooner. We accept orders awaiting replenishment; please contact us before ordering if you need a specific shipping date.\u003c\/p\u003e\n\u003cp\u003eSee our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e for details.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"HTC Mfg.","offers":[{"title":"313-0620 \/ 313 \/ Uncoated","offer_id":40353119535290,"sku":"313-0620","price":68.28,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0283\/9796\/1325\/products\/Series_313_74cb2d27-ef20-4cbe-bf71-1a1bea85d66b.png?v=1793587818"},{"product_id":"313-0525","title":"7\/16\" End Mill HOG Mill Single End. Medium Pitch Knuckle Rougher. 25 Degree Helix. Chamfer Width .020\" - Shank OD 7\/16\" LOC 9\/16\" OAL 2-3\/4\" - 4 Flutes - Uncoated","description":"\u003cp\u003e\u003cstrong\u003e7\/16\" cutting diameter, 4 flutes, single end, uncoated.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eGround from solid carbide. This tool cuts 7\/16\" diameter, runs a 7\/16\" shank, has 9\/16\" of flute and measures 2-3\/4\" overall. The flutes are cut at a 25° helix.\u003c\/p\u003e\u003cp\u003eThis is a rougher: the chip-breaking edge form cuts the cutting pressure and breaks the chip into short pieces, so it removes stock faster than a finishing tool at the same power.\u003c\/p\u003e\u003cp\u003eUncoated, so the edge stays as sharp as it can be ground — the usual choice for aluminum and other soft, sticky materials.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting diameter:\u003c\/strong\u003e 7\/16\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank diameter:\u003c\/strong\u003e 7\/16\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of cut (LOC):\u003c\/strong\u003e 9\/16\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall length (OAL):\u003c\/strong\u003e 2-3\/4\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlutes:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd type:\u003c\/strong\u003e Single End\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix angle:\u003c\/strong\u003e 25°\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting style:\u003c\/strong\u003e Roughing \/ chip-breaking\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating:\u003c\/strong\u003e Uncoated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool material:\u003c\/strong\u003e Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e 313\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem number:\u003c\/strong\u003e 313-0525\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"fm-dispatch-notice\"\u003e\n\u003ch3\u003eAvailability and Shipping\u003c\/h3\u003e\n\u003cp\u003eFor HTC carbide tools, if the uncoated tool is available and coating is needed, estimated time to ship is 3–4 business days. If the tool is not in stock, estimated time to ship is 7–10 calendar days. For items that require manufacturing, contact us for a confirmed estimated ship date.\u003c\/p\u003e\n\u003cp\u003eUnless stated otherwise, estimated time to ship is measured in calendar days, from order placement until your order is handed to the carrier. Carrier transit time is additional. Orders may ship sooner. We accept orders awaiting replenishment; please contact us before ordering if you need a specific shipping date.\u003c\/p\u003e\n\u003cp\u003eSee our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e for details.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"HTC Mfg.","offers":[{"title":"313-0525 \/ 313 \/ Uncoated","offer_id":40353119568058,"sku":"313-0525","price":74.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0283\/9796\/1325\/products\/Series_313_1f1ca879-2204-4cf2-95c8-8b5e79c29274.png?v=1793587819"},{"product_id":"313-0625","title":"7\/16\" End Mill HOG Mill Single End. Medium Pitch Knuckle Rougher. 25 Degree Helix. Chamfer Width .020\" - Shank OD 7\/16\" LOC 1\" OAL 2-3\/4\" - 4 Flutes - Uncoated","description":"\u003cp\u003e\u003cstrong\u003e7\/16\" cutting diameter, 4 flutes, single end, uncoated.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eGround from solid carbide. This tool cuts 7\/16\" diameter, runs a 7\/16\" shank, has 1\" of flute and measures 2-3\/4\" overall. The flutes are cut at a 25° helix.\u003c\/p\u003e\u003cp\u003eThis is a rougher: the chip-breaking edge form cuts the cutting pressure and breaks the chip into short pieces, so it removes stock faster than a finishing tool at the same power.\u003c\/p\u003e\u003cp\u003eUncoated, so the edge stays as sharp as it can be ground — the usual choice for aluminum and other soft, sticky materials.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting diameter:\u003c\/strong\u003e 7\/16\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank diameter:\u003c\/strong\u003e 7\/16\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of cut (LOC):\u003c\/strong\u003e 1\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall length (OAL):\u003c\/strong\u003e 2-3\/4\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlutes:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd type:\u003c\/strong\u003e Single End\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix angle:\u003c\/strong\u003e 25°\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting style:\u003c\/strong\u003e Roughing \/ chip-breaking\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating:\u003c\/strong\u003e Uncoated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool material:\u003c\/strong\u003e Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e 313\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem number:\u003c\/strong\u003e 313-0625\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"fm-dispatch-notice\"\u003e\n\u003ch3\u003eAvailability and Shipping\u003c\/h3\u003e\n\u003cp\u003eFor HTC carbide tools, if the uncoated tool is available and coating is needed, estimated time to ship is 3–4 business days. If the tool is not in stock, estimated time to ship is 7–10 calendar days. For items that require manufacturing, contact us for a confirmed estimated ship date.\u003c\/p\u003e\n\u003cp\u003eUnless stated otherwise, estimated time to ship is measured in calendar days, from order placement until your order is handed to the carrier. Carrier transit time is additional. Orders may ship sooner. We accept orders awaiting replenishment; please contact us before ordering if you need a specific shipping date.\u003c\/p\u003e\n\u003cp\u003eSee our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e for details.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"HTC Mfg.","offers":[{"title":"313-0625 \/ 313 \/ Uncoated","offer_id":40353119600826,"sku":"313-0625","price":81.66,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0283\/9796\/1325\/products\/Series_313_90cce0f4-981e-48c8-a6e7-026a2cf15a33.png?v=1793587819"},{"product_id":"313-0528","title":"1\/2\" End Mill HOG Mill Single End. Medium Pitch Knuckle Rougher. 25 Degree Helix. Chamfer Width .025\" - Shank OD 1\/2\" LOC 5\/8\" OAL 3\" - 4 Flutes - Uncoated","description":"\u003cp\u003e\u003cstrong\u003e1\/2\" cutting diameter, 4 flutes, single end, uncoated.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eGround from solid carbide. This tool cuts 1\/2\" diameter, runs a 1\/2\" shank, has 5\/8\" of flute and measures 3\" overall. The flutes are cut at a 25° helix.\u003c\/p\u003e\u003cp\u003eThis is a rougher: the chip-breaking edge form cuts the cutting pressure and breaks the chip into short pieces, so it removes stock faster than a finishing tool at the same power.\u003c\/p\u003e\u003cp\u003eUncoated, so the edge stays as sharp as it can be ground — the usual choice for aluminum and other soft, sticky materials.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting diameter:\u003c\/strong\u003e 1\/2\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank diameter:\u003c\/strong\u003e 1\/2\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of cut (LOC):\u003c\/strong\u003e 5\/8\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall length (OAL):\u003c\/strong\u003e 3\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlutes:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd type:\u003c\/strong\u003e Single End\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix angle:\u003c\/strong\u003e 25°\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting style:\u003c\/strong\u003e Roughing \/ chip-breaking\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating:\u003c\/strong\u003e Uncoated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool material:\u003c\/strong\u003e Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e 313\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem number:\u003c\/strong\u003e 313-0528\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"fm-dispatch-notice\"\u003e\n\u003ch3\u003eAvailability and Shipping\u003c\/h3\u003e\n\u003cp\u003eFor HTC carbide tools, if the uncoated tool is available and coating is needed, estimated time to ship is 3–4 business days. If the tool is not in stock, estimated time to ship is 7–10 calendar days. For items that require manufacturing, contact us for a confirmed estimated ship date.\u003c\/p\u003e\n\u003cp\u003eUnless stated otherwise, estimated time to ship is measured in calendar days, from order placement until your order is handed to the carrier. Carrier transit time is additional. Orders may ship sooner. We accept orders awaiting replenishment; please contact us before ordering if you need a specific shipping date.\u003c\/p\u003e\n\u003cp\u003eSee our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e for details.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"HTC Mfg.","offers":[{"title":"313-0528 \/ 313 \/ Uncoated","offer_id":40353119633594,"sku":"313-0528","price":107.18,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0283\/9796\/1325\/products\/Series_313_cdbe9fff-9c45-4eff-a5ec-695e5a037677.png?v=1793587819"},{"product_id":"313-0628","title":"1\/2\" End Mill HOG Mill Single End. Medium Pitch Knuckle Rougher. 25 Degree Helix. Chamfer Width .025\" - Shank OD 1\/2\" LOC 1-1\/4\" OAL 3\" - 4 Flutes - Uncoated","description":"\u003cp\u003e\u003cstrong\u003e1\/2\" cutting diameter, 4 flutes, single end, uncoated.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eGround from solid carbide. This tool cuts 1\/2\" diameter, runs a 1\/2\" shank, has 1-1\/4\" of flute and measures 3\" overall. The flutes are cut at a 25° helix.\u003c\/p\u003e\u003cp\u003eThis is a rougher: the chip-breaking edge form cuts the cutting pressure and breaks the chip into short pieces, so it removes stock faster than a finishing tool at the same power.\u003c\/p\u003e\u003cp\u003eUncoated, so the edge stays as sharp as it can be ground — the usual choice for aluminum and other soft, sticky materials.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting diameter:\u003c\/strong\u003e 1\/2\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank diameter:\u003c\/strong\u003e 1\/2\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of cut (LOC):\u003c\/strong\u003e 1-1\/4\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall length (OAL):\u003c\/strong\u003e 3\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlutes:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd type:\u003c\/strong\u003e Single End\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix angle:\u003c\/strong\u003e 25°\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting style:\u003c\/strong\u003e Roughing \/ chip-breaking\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating:\u003c\/strong\u003e Uncoated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool material:\u003c\/strong\u003e Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e 313\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem number:\u003c\/strong\u003e 313-0628\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"fm-dispatch-notice\"\u003e\n\u003ch3\u003eAvailability and Shipping\u003c\/h3\u003e\n\u003cp\u003eFor HTC carbide tools, if the uncoated tool is available and coating is needed, estimated time to ship is 3–4 business days. If the tool is not in stock, estimated time to ship is 7–10 calendar days. For items that require manufacturing, contact us for a confirmed estimated ship date.\u003c\/p\u003e\n\u003cp\u003eUnless stated otherwise, estimated time to ship is measured in calendar days, from order placement until your order is handed to the carrier. Carrier transit time is additional. Orders may ship sooner. We accept orders awaiting replenishment; please contact us before ordering if you need a specific shipping date.\u003c\/p\u003e\n\u003cp\u003eSee our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e for details.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"HTC Mfg.","offers":[{"title":"313-0628 \/ 313 \/ Uncoated","offer_id":40353119699130,"sku":"313-0628","price":114.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0283\/9796\/1325\/products\/Series_313_c87150c2-eb99-4b75-b099-2700739c29e5.png?v=1793587819"},{"product_id":"313-0629","title":"9\/16\" End Mill HOG Mill Single End. Medium Pitch Knuckle Rougher. 25 Degree Helix. Chamfer Width .025\" - Shank OD 9\/16\" LOC 1-1\/4\" OAL 3-1\/2\" - 4 Flutes - Uncoated","description":"\u003cp\u003e\u003cstrong\u003e9\/16\" cutting diameter, 4 flutes, single end, uncoated.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eGround from solid carbide. This tool cuts 9\/16\" diameter, runs a 9\/16\" shank, has 1-1\/4\" of flute and measures 3-1\/2\" overall. The flutes are cut at a 25° helix.\u003c\/p\u003e\u003cp\u003eThis is a rougher: the chip-breaking edge form cuts the cutting pressure and breaks the chip into short pieces, so it removes stock faster than a finishing tool at the same power.\u003c\/p\u003e\u003cp\u003eUncoated, so the edge stays as sharp as it can be ground — the usual choice for aluminum and other soft, sticky materials.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting diameter:\u003c\/strong\u003e 9\/16\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank diameter:\u003c\/strong\u003e 9\/16\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of cut (LOC):\u003c\/strong\u003e 1-1\/4\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall length (OAL):\u003c\/strong\u003e 3-1\/2\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlutes:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd type:\u003c\/strong\u003e Single End\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix angle:\u003c\/strong\u003e 25°\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting style:\u003c\/strong\u003e Roughing \/ chip-breaking\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating:\u003c\/strong\u003e Uncoated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool material:\u003c\/strong\u003e Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e 313\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem number:\u003c\/strong\u003e 313-0629\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"fm-dispatch-notice\"\u003e\n\u003ch3\u003eAvailability and Shipping\u003c\/h3\u003e\n\u003cp\u003eFor HTC carbide tools, if the uncoated tool is available and coating is needed, estimated time to ship is 3–4 business days. If the tool is not in stock, estimated time to ship is 7–10 calendar days. For items that require manufacturing, contact us for a confirmed estimated ship date.\u003c\/p\u003e\n\u003cp\u003eUnless stated otherwise, estimated time to ship is measured in calendar days, from order placement until your order is handed to the carrier. Carrier transit time is additional. Orders may ship sooner. We accept orders awaiting replenishment; please contact us before ordering if you need a specific shipping date.\u003c\/p\u003e\n\u003cp\u003eSee our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e for details.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"HTC Mfg.","offers":[{"title":"313-0629 \/ 313 \/ Uncoated","offer_id":40353119731898,"sku":"313-0629","price":132.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0283\/9796\/1325\/products\/Series_313_2c075b6f-6e18-4652-a6b1-f7ca8f22a7af.png?v=1793587818"},{"product_id":"313-0530","title":"5\/8\" End Mill HOG Mill Single End. Medium Pitch Knuckle Rougher. 25 Degree Helix. Chamfer Width .025\" - Shank OD 5\/8\" LOC 3\/4\" OAL 3-1\/2\" - 4 Flutes - Uncoated","description":"\u003cp\u003e\u003cstrong\u003e5\/8\" cutting diameter, 4 flutes, single end, uncoated.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eGround from solid carbide. This tool cuts 5\/8\" diameter, runs a 5\/8\" shank, has 3\/4\" of flute and measures 3-1\/2\" overall. The flutes are cut at a 25° helix.\u003c\/p\u003e\u003cp\u003eThis is a rougher: the chip-breaking edge form cuts the cutting pressure and breaks the chip into short pieces, so it removes stock faster than a finishing tool at the same power.\u003c\/p\u003e\u003cp\u003eUncoated, so the edge stays as sharp as it can be ground — the usual choice for aluminum and other soft, sticky materials.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting diameter:\u003c\/strong\u003e 5\/8\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank diameter:\u003c\/strong\u003e 5\/8\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of cut (LOC):\u003c\/strong\u003e 3\/4\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall length (OAL):\u003c\/strong\u003e 3-1\/2\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlutes:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd type:\u003c\/strong\u003e Single End\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix angle:\u003c\/strong\u003e 25°\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting style:\u003c\/strong\u003e Roughing \/ chip-breaking\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating:\u003c\/strong\u003e Uncoated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool material:\u003c\/strong\u003e Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e 313\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem number:\u003c\/strong\u003e 313-0530\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"fm-dispatch-notice\"\u003e\n\u003ch3\u003eAvailability and Shipping\u003c\/h3\u003e\n\u003cp\u003eFor HTC carbide tools, if the uncoated tool is available and coating is needed, estimated time to ship is 3–4 business days. If the tool is not in stock, estimated time to ship is 7–10 calendar days. For items that require manufacturing, contact us for a confirmed estimated ship date.\u003c\/p\u003e\n\u003cp\u003eUnless stated otherwise, estimated time to ship is measured in calendar days, from order placement until your order is handed to the carrier. Carrier transit time is additional. Orders may ship sooner. We accept orders awaiting replenishment; please contact us before ordering if you need a specific shipping date.\u003c\/p\u003e\n\u003cp\u003eSee our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e for details.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"HTC Mfg.","offers":[{"title":"313-0530 \/ 313 \/ Uncoated","offer_id":40353119764666,"sku":"313-0530","price":139.09,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0283\/9796\/1325\/products\/Series_313_f678c29d-4428-42f2-beee-8ea548bf6017.png?v=1793587819"},{"product_id":"313-0630","title":"5\/8\" End Mill HOG Mill Single End. Medium Pitch Knuckle Rougher. 25 Degree Helix. Chamfer Width .025\" - Shank OD 5\/8\" LOC 1-5\/8\" OAL 3-1\/2\" - 4 Flutes - Uncoated","description":"\u003cp\u003e\u003cstrong\u003e5\/8\" cutting diameter, 4 flutes, single end, uncoated.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eGround from solid carbide. This tool cuts 5\/8\" diameter, runs a 5\/8\" shank, has 1-5\/8\" of flute and measures 3-1\/2\" overall. The flutes are cut at a 25° helix.\u003c\/p\u003e\u003cp\u003eThis is a rougher: the chip-breaking edge form cuts the cutting pressure and breaks the chip into short pieces, so it removes stock faster than a finishing tool at the same power.\u003c\/p\u003e\u003cp\u003eUncoated, so the edge stays as sharp as it can be ground — the usual choice for aluminum and other soft, sticky materials.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting diameter:\u003c\/strong\u003e 5\/8\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank diameter:\u003c\/strong\u003e 5\/8\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of cut (LOC):\u003c\/strong\u003e 1-5\/8\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall length (OAL):\u003c\/strong\u003e 3-1\/2\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlutes:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd type:\u003c\/strong\u003e Single End\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix angle:\u003c\/strong\u003e 25°\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting style:\u003c\/strong\u003e Roughing \/ chip-breaking\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating:\u003c\/strong\u003e Uncoated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool material:\u003c\/strong\u003e Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e 313\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem number:\u003c\/strong\u003e 313-0630\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"fm-dispatch-notice\"\u003e\n\u003ch3\u003eAvailability and Shipping\u003c\/h3\u003e\n\u003cp\u003eFor HTC carbide tools, if the uncoated tool is available and coating is needed, estimated time to ship is 3–4 business days. If the tool is not in stock, estimated time to ship is 7–10 calendar days. For items that require manufacturing, contact us for a confirmed estimated ship date.\u003c\/p\u003e\n\u003cp\u003eUnless stated otherwise, estimated time to ship is measured in calendar days, from order placement until your order is handed to the carrier. Carrier transit time is additional. Orders may ship sooner. We accept orders awaiting replenishment; please contact us before ordering if you need a specific shipping date.\u003c\/p\u003e\n\u003cp\u003eSee our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e for details.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"HTC Mfg.","offers":[{"title":"313-0630 \/ 313 \/ Uncoated","offer_id":40353119830202,"sku":"313-0630","price":148.83,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0283\/9796\/1325\/products\/Series_313_ad7ad7fa-3f37-46a5-a0e0-c961f3a34c63.png?v=1793587819"},{"product_id":"313-0532","title":"3\/4\" End Mill HOG Mill Single End. Medium Pitch Knuckle Rougher. 25 Degree Helix. Chamfer Width .025\" - Shank OD 3\/4\" LOC 1\" OAL 4\" - 4 Flutes - Uncoated","description":"\u003cp\u003e\u003cstrong\u003e3\/4\" cutting diameter, 4 flutes, single end, uncoated.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eGround from solid carbide. This tool cuts 3\/4\" diameter, runs a 3\/4\" shank, has 1\" of flute and measures 4\" overall. The flutes are cut at a 25° helix.\u003c\/p\u003e\u003cp\u003eThis is a rougher: the chip-breaking edge form cuts the cutting pressure and breaks the chip into short pieces, so it removes stock faster than a finishing tool at the same power.\u003c\/p\u003e\u003cp\u003eUncoated, so the edge stays as sharp as it can be ground — the usual choice for aluminum and other soft, sticky materials.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting diameter:\u003c\/strong\u003e 3\/4\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank diameter:\u003c\/strong\u003e 3\/4\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of cut (LOC):\u003c\/strong\u003e 1\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall length (OAL):\u003c\/strong\u003e 4\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlutes:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd type:\u003c\/strong\u003e Single End\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix angle:\u003c\/strong\u003e 25°\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting style:\u003c\/strong\u003e Roughing \/ chip-breaking\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating:\u003c\/strong\u003e Uncoated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool material:\u003c\/strong\u003e Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e 313\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem number:\u003c\/strong\u003e 313-0532\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"fm-dispatch-notice\"\u003e\n\u003ch3\u003eAvailability and Shipping\u003c\/h3\u003e\n\u003cp\u003eFor HTC carbide tools, if the uncoated tool is available and coating is needed, estimated time to ship is 3–4 business days. If the tool is not in stock, estimated time to ship is 7–10 calendar days. For items that require manufacturing, contact us for a confirmed estimated ship date.\u003c\/p\u003e\n\u003cp\u003eUnless stated otherwise, estimated time to ship is measured in calendar days, from order placement until your order is handed to the carrier. Carrier transit time is additional. Orders may ship sooner. We accept orders awaiting replenishment; please contact us before ordering if you need a specific shipping date.\u003c\/p\u003e\n\u003cp\u003eSee our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e for details.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"HTC Mfg.","offers":[{"title":"313-0532 \/ 313 \/ Uncoated","offer_id":40353121140922,"sku":"313-0532","price":263.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0283\/9796\/1325\/products\/Series_313_174784db-d0e3-4e07-8043-42c3c8703f71.png?v=1793587819"},{"product_id":"313-0632","title":"3\/4\" End Mill HOG Mill Single End. Medium Pitch Knuckle Rougher. 25 Degree Helix. Chamfer Width .025\" - Shank OD 3\/4\" LOC 1-5\/8\" OAL 4\" - 4 Flutes - Uncoated","description":"\u003cp\u003e\u003cstrong\u003e3\/4\" cutting diameter, 4 flutes, single end, uncoated.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eGround from solid carbide. This tool cuts 3\/4\" diameter, runs a 3\/4\" shank, has 1-5\/8\" of flute and measures 4\" overall. The flutes are cut at a 25° helix.\u003c\/p\u003e\u003cp\u003eThis is a rougher: the chip-breaking edge form cuts the cutting pressure and breaks the chip into short pieces, so it removes stock faster than a finishing tool at the same power.\u003c\/p\u003e\u003cp\u003eUncoated, so the edge stays as sharp as it can be ground — the usual choice for aluminum and other soft, sticky materials.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting diameter:\u003c\/strong\u003e 3\/4\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank diameter:\u003c\/strong\u003e 3\/4\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of cut (LOC):\u003c\/strong\u003e 1-5\/8\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall length (OAL):\u003c\/strong\u003e 4\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlutes:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd type:\u003c\/strong\u003e Single End\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix angle:\u003c\/strong\u003e 25°\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting style:\u003c\/strong\u003e Roughing \/ chip-breaking\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating:\u003c\/strong\u003e Uncoated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool material:\u003c\/strong\u003e Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e 313\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem number:\u003c\/strong\u003e 313-0632\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"fm-dispatch-notice\"\u003e\n\u003ch3\u003eAvailability and Shipping\u003c\/h3\u003e\n\u003cp\u003eFor HTC carbide tools, if the uncoated tool is available and coating is needed, estimated time to ship is 3–4 business days. If the tool is not in stock, estimated time to ship is 7–10 calendar days. For items that require manufacturing, contact us for a confirmed estimated ship date.\u003c\/p\u003e\n\u003cp\u003eUnless stated otherwise, estimated time to ship is measured in calendar days, from order placement until your order is handed to the carrier. Carrier transit time is additional. Orders may ship sooner. We accept orders awaiting replenishment; please contact us before ordering if you need a specific shipping date.\u003c\/p\u003e\n\u003cp\u003eSee our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e for details.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"HTC Mfg.","offers":[{"title":"313-0632 \/ 313 \/ Uncoated","offer_id":40353122386106,"sku":"313-0632","price":282.17,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0283\/9796\/1325\/products\/Series_313_ded304ca-831b-4225-bd47-6df75e0733b6.png?v=1793587819"},{"product_id":"313-0534","title":"1\" End Mill HOG Mill Single End. Medium Pitch Knuckle Rougher. 25 Degree Helix. Chamfer Width .025\" - Shank OD 1\" LOC 1-1\/4\" OAL 4\" - 6 Flutes - Uncoated","description":"\u003cp\u003e\u003cstrong\u003e1\" cutting diameter, 6 flutes, single end, uncoated.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eGround from solid carbide. This tool cuts 1\" diameter, runs a 1\" shank, has 1-1\/4\" of flute and measures 4\" overall. The flutes are cut at a 25° helix.\u003c\/p\u003e\u003cp\u003eThis is a rougher: the chip-breaking edge form cuts the cutting pressure and breaks the chip into short pieces, so it removes stock faster than a finishing tool at the same power.\u003c\/p\u003e\u003cp\u003eUncoated, so the edge stays as sharp as it can be ground — the usual choice for aluminum and other soft, sticky materials.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting diameter:\u003c\/strong\u003e 1\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank diameter:\u003c\/strong\u003e 1\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of cut (LOC):\u003c\/strong\u003e 1-1\/4\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall length (OAL):\u003c\/strong\u003e 4\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlutes:\u003c\/strong\u003e 6\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd type:\u003c\/strong\u003e Single End\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix angle:\u003c\/strong\u003e 25°\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting style:\u003c\/strong\u003e Roughing \/ chip-breaking\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating:\u003c\/strong\u003e Uncoated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool material:\u003c\/strong\u003e Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e 313\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem number:\u003c\/strong\u003e 313-0534\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"fm-dispatch-notice\"\u003e\n\u003ch3\u003eAvailability and Shipping\u003c\/h3\u003e\n\u003cp\u003eFor HTC carbide tools, if the uncoated tool is available and coating is needed, estimated time to ship is 3–4 business days. If the tool is not in stock, estimated time to ship is 7–10 calendar days. For items that require manufacturing, contact us for a confirmed estimated ship date.\u003c\/p\u003e\n\u003cp\u003eUnless stated otherwise, estimated time to ship is measured in calendar days, from order placement until your order is handed to the carrier. Carrier transit time is additional. Orders may ship sooner. We accept orders awaiting replenishment; please contact us before ordering if you need a specific shipping date.\u003c\/p\u003e\n\u003cp\u003eSee our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e for details.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"HTC Mfg.","offers":[{"title":"313-0534 \/ 313 \/ Uncoated","offer_id":40353122451642,"sku":"313-0534","price":423.22,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0283\/9796\/1325\/products\/Series_313_cd2b74a9-41f0-47ac-be5e-951a483f3dd8.png?v=1793587819"},{"product_id":"313-0634","title":"1\" End Mill HOG Mill Single End. Medium Pitch Knuckle Rougher. 25 Degree Helix. Chamfer Width .025\" - Shank OD 1\" LOC 2\" OAL 4\" - 6 Flutes - Uncoated","description":"\u003cp\u003e\u003cstrong\u003e1\" cutting diameter, 6 flutes, single end, uncoated.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eGround from solid carbide. This tool cuts 1\" diameter, runs a 1\" shank, has 2\" of flute and measures 4\" overall. The flutes are cut at a 25° helix.\u003c\/p\u003e\u003cp\u003eThis is a rougher: the chip-breaking edge form cuts the cutting pressure and breaks the chip into short pieces, so it removes stock faster than a finishing tool at the same power.\u003c\/p\u003e\u003cp\u003eUncoated, so the edge stays as sharp as it can be ground — the usual choice for aluminum and other soft, sticky materials.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting diameter:\u003c\/strong\u003e 1\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank diameter:\u003c\/strong\u003e 1\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of cut (LOC):\u003c\/strong\u003e 2\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall length (OAL):\u003c\/strong\u003e 4\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlutes:\u003c\/strong\u003e 6\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd type:\u003c\/strong\u003e Single End\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix angle:\u003c\/strong\u003e 25°\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting style:\u003c\/strong\u003e Roughing \/ chip-breaking\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating:\u003c\/strong\u003e Uncoated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool material:\u003c\/strong\u003e Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e 313\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem number:\u003c\/strong\u003e 313-0634\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"fm-dispatch-notice\"\u003e\n\u003ch3\u003eAvailability and Shipping\u003c\/h3\u003e\n\u003cp\u003eFor HTC carbide tools, if the uncoated tool is available and coating is needed, estimated time to ship is 3–4 business days. If the tool is not in stock, estimated time to ship is 7–10 calendar days. For items that require manufacturing, contact us for a confirmed estimated ship date.\u003c\/p\u003e\n\u003cp\u003eUnless stated otherwise, estimated time to ship is measured in calendar days, from order placement until your order is handed to the carrier. Carrier transit time is additional. Orders may ship sooner. We accept orders awaiting replenishment; please contact us before ordering if you need a specific shipping date.\u003c\/p\u003e\n\u003cp\u003eSee our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e for details.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"HTC Mfg.","offers":[{"title":"313-0634 \/ 313 \/ Uncoated","offer_id":40353122484410,"sku":"313-0634","price":452.84,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0283\/9796\/1325\/products\/Series_313_a747ed14-ee4d-4f10-b374-92ce64e3b437.png?v=1793587819"},{"product_id":"314-9605","title":"1\/4\" End Mill HOG Mill Single End. Medium Pitch Knuckle Rougher. 25 Degree Helix. Chamfer Width .020\" - Shank OD 1\/4\" LOC 3\/4\" OAL 2-1\/2\" - 3 Flutes - AlTiN Coated","description":"\u003cp\u003e\u003cstrong\u003e1\/4\" cutting diameter, 3 flutes, single end, AlTiN coated.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eGround from solid carbide. This tool cuts 1\/4\" diameter, runs a 1\/4\" shank, has 3\/4\" of flute and measures 2-1\/2\" overall. The flutes are cut at a 25° helix.\u003c\/p\u003e\u003cp\u003eThis is a rougher: the chip-breaking edge form cuts the cutting pressure and breaks the chip into short pieces, so it removes stock faster than a finishing tool at the same power.\u003c\/p\u003e\u003cp\u003eAlTiN is built for heat: stainless, tool steels and high-temperature alloys, especially with little or no coolant.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting diameter:\u003c\/strong\u003e 1\/4\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank diameter:\u003c\/strong\u003e 1\/4\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of cut (LOC):\u003c\/strong\u003e 3\/4\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall length (OAL):\u003c\/strong\u003e 2-1\/2\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlutes:\u003c\/strong\u003e 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd type:\u003c\/strong\u003e Single End\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix angle:\u003c\/strong\u003e 25°\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting style:\u003c\/strong\u003e Roughing \/ chip-breaking\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating:\u003c\/strong\u003e AlTiN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool material:\u003c\/strong\u003e Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e 314\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem number:\u003c\/strong\u003e 314-9605\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"fm-dispatch-notice\"\u003e\n\u003ch3\u003eAvailability and Shipping\u003c\/h3\u003e\n\u003cp\u003eFor HTC carbide tools, if the uncoated tool is available and coating is needed, estimated time to ship is 3–4 business days. If the tool is not in stock, estimated time to ship is 7–10 calendar days. For items that require manufacturing, contact us for a confirmed estimated ship date.\u003c\/p\u003e\n\u003cp\u003eUnless stated otherwise, estimated time to ship is measured in calendar days, from order placement until your order is handed to the carrier. Carrier transit time is additional. Orders may ship sooner. We accept orders awaiting replenishment; please contact us before ordering if you need a specific shipping date.\u003c\/p\u003e\n\u003cp\u003eSee our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e for details.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"HTC Mfg.","offers":[{"title":"314-9605 \/ 314 \/ AlTiN","offer_id":40353122517178,"sku":"314-9605","price":49.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0283\/9796\/1325\/products\/Series_314.png?v=1793587646"},{"product_id":"314-9606","title":"1\/4\" End Mill HOG Mill Single End. Medium Pitch Knuckle Rougher. 25 Degree Helix. Chamfer Width .020\" - Shank OD 1\/4\" LOC 3\/4\" OAL 2-1\/2\" - 3 Flutes - AlTiN Coated","description":"\u003cp\u003e\u003cstrong\u003e1\/4\" cutting diameter, 3 flutes, single end, AlTiN coated.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eGround from solid carbide. This tool cuts 1\/4\" diameter, runs a 1\/4\" shank, has 3\/4\" of flute and measures 2-1\/2\" overall. The flutes are cut at a 25° helix.\u003c\/p\u003e\u003cp\u003eThis is a rougher: the chip-breaking edge form cuts the cutting pressure and breaks the chip into short pieces, so it removes stock faster than a finishing tool at the same power.\u003c\/p\u003e\u003cp\u003eAlTiN is built for heat: stainless, tool steels and high-temperature alloys, especially with little or no coolant.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting diameter:\u003c\/strong\u003e 1\/4\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank diameter:\u003c\/strong\u003e 1\/4\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of cut (LOC):\u003c\/strong\u003e 3\/4\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall length (OAL):\u003c\/strong\u003e 2-1\/2\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlutes:\u003c\/strong\u003e 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd type:\u003c\/strong\u003e Single End\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix angle:\u003c\/strong\u003e 25°\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting style:\u003c\/strong\u003e Roughing \/ chip-breaking\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating:\u003c\/strong\u003e AlTiN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool material:\u003c\/strong\u003e Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e 314\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem number:\u003c\/strong\u003e 314-9606\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"fm-dispatch-notice\"\u003e\n\u003ch3\u003eAvailability and Shipping\u003c\/h3\u003e\n\u003cp\u003eFor HTC carbide tools, if the uncoated tool is available and coating is needed, estimated time to ship is 3–4 business days. If the tool is not in stock, estimated time to ship is 7–10 calendar days. For items that require manufacturing, contact us for a confirmed estimated ship date.\u003c\/p\u003e\n\u003cp\u003eUnless stated otherwise, estimated time to ship is measured in calendar days, from order placement until your order is handed to the carrier. Carrier transit time is additional. Orders may ship sooner. We accept orders awaiting replenishment; please contact us before ordering if you need a specific shipping date.\u003c\/p\u003e\n\u003cp\u003eSee our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e for details.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"HTC Mfg.","offers":[{"title":"314-9606 \/ 314 \/ AlTiN","offer_id":40353122615482,"sku":"314-9606","price":52.46,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0283\/9796\/1325\/products\/Series_314_1d3a5ca3-d040-4e21-b5f0-18c8f32551d2.png?v=1793587647"},{"product_id":"314-9607","title":"5\/16\" End Mill HOG Mill Single End. Medium Pitch Knuckle Rougher. 25 Degree Helix. Chamfer Width .020\" - Shank OD 5\/16\" LOC 7\/16\" OAL 2-1\/2\" - 3 Flutes - AlTiN Coated","description":"\u003cp\u003e\u003cstrong\u003e5\/16\" cutting diameter, 3 flutes, single end, AlTiN coated.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eGround from solid carbide. This tool cuts 5\/16\" diameter, runs a 5\/16\" shank, has 7\/16\" of flute and measures 2-1\/2\" overall. The flutes are cut at a 25° helix.\u003c\/p\u003e\u003cp\u003eThis is a rougher: the chip-breaking edge form cuts the cutting pressure and breaks the chip into short pieces, so it removes stock faster than a finishing tool at the same power.\u003c\/p\u003e\u003cp\u003eAlTiN is built for heat: stainless, tool steels and high-temperature alloys, especially with little or no coolant.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting diameter:\u003c\/strong\u003e 5\/16\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank diameter:\u003c\/strong\u003e 5\/16\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of cut (LOC):\u003c\/strong\u003e 7\/16\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall length (OAL):\u003c\/strong\u003e 2-1\/2\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlutes:\u003c\/strong\u003e 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd type:\u003c\/strong\u003e Single End\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix angle:\u003c\/strong\u003e 25°\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting style:\u003c\/strong\u003e Roughing \/ chip-breaking\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating:\u003c\/strong\u003e AlTiN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool material:\u003c\/strong\u003e Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e 314\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem number:\u003c\/strong\u003e 314-9607\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"fm-dispatch-notice\"\u003e\n\u003ch3\u003eAvailability and Shipping\u003c\/h3\u003e\n\u003cp\u003eFor HTC carbide tools, if the uncoated tool is available and coating is needed, estimated time to ship is 3–4 business days. If the tool is not in stock, estimated time to ship is 7–10 calendar days. For items that require manufacturing, contact us for a confirmed estimated ship date.\u003c\/p\u003e\n\u003cp\u003eUnless stated otherwise, estimated time to ship is measured in calendar days, from order placement until your order is handed to the carrier. Carrier transit time is additional. Orders may ship sooner. We accept orders awaiting replenishment; please contact us before ordering if you need a specific shipping date.\u003c\/p\u003e\n\u003cp\u003eSee our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e for details.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"HTC Mfg.","offers":[{"title":"314-9607 \/ 314 \/ AlTiN","offer_id":40353122648250,"sku":"314-9607","price":52.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0283\/9796\/1325\/products\/Series_314_4e84732a-1ead-4469-b38e-1281781e1ee5.png?v=1793587647"},{"product_id":"314-9608","title":"5\/16\" End Mill HOG Mill Single End. Medium Pitch Knuckle Rougher. 25 Degree Helix. Chamfer Width .020\" - Shank OD 5\/16\" LOC 13\/16\" OAL 2-1\/2\" - 3 Flutes - AlTiN Coated","description":"\u003cp\u003e\u003cstrong\u003e5\/16\" cutting diameter, 3 flutes, single end, AlTiN coated.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eGround from solid carbide. This tool cuts 5\/16\" diameter, runs a 5\/16\" shank, has 13\/16\" of flute and measures 2-1\/2\" overall. The flutes are cut at a 25° helix.\u003c\/p\u003e\u003cp\u003eThis is a rougher: the chip-breaking edge form cuts the cutting pressure and breaks the chip into short pieces, so it removes stock faster than a finishing tool at the same power.\u003c\/p\u003e\u003cp\u003eAlTiN is built for heat: stainless, tool steels and high-temperature alloys, especially with little or no coolant.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting diameter:\u003c\/strong\u003e 5\/16\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank diameter:\u003c\/strong\u003e 5\/16\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of cut (LOC):\u003c\/strong\u003e 13\/16\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall length (OAL):\u003c\/strong\u003e 2-1\/2\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlutes:\u003c\/strong\u003e 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd type:\u003c\/strong\u003e Single End\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix angle:\u003c\/strong\u003e 25°\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting style:\u003c\/strong\u003e Roughing \/ chip-breaking\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating:\u003c\/strong\u003e AlTiN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool material:\u003c\/strong\u003e Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e 314\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem number:\u003c\/strong\u003e 314-9608\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"fm-dispatch-notice\"\u003e\n\u003ch3\u003eAvailability and Shipping\u003c\/h3\u003e\n\u003cp\u003eFor HTC carbide tools, if the uncoated tool is available and coating is needed, estimated time to ship is 3–4 business days. If the tool is not in stock, estimated time to ship is 7–10 calendar days. For items that require manufacturing, contact us for a confirmed estimated ship date.\u003c\/p\u003e\n\u003cp\u003eUnless stated otherwise, estimated time to ship is measured in calendar days, from order placement until your order is handed to the carrier. Carrier transit time is additional. Orders may ship sooner. We accept orders awaiting replenishment; please contact us before ordering if you need a specific shipping date.\u003c\/p\u003e\n\u003cp\u003eSee our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e for details.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"HTC Mfg.","offers":[{"title":"314-9608 \/ 314 \/ AlTiN","offer_id":40353122713786,"sku":"314-9608","price":58.42,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0283\/9796\/1325\/products\/Series_314_d48d0b4f-5b2f-4e21-ad4e-3344cb22f00d.png?v=1793587646"},{"product_id":"314-9609","title":"3\/8\" End Mill HOG Mill Single End. Medium Pitch Knuckle Rougher. 25 Degree Helix. Chamfer Width .020\" - Shank OD 3\/8\" LOC 1\/2\" OAL 2-1\/2\" - 4 Flutes - AlTiN Coated","description":"\u003cp\u003e\u003cstrong\u003e3\/8\" cutting diameter, 4 flutes, single end, AlTiN coated.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eGround from solid carbide. This tool cuts 3\/8\" diameter, runs a 3\/8\" shank, has 1\/2\" of flute and measures 2-1\/2\" overall. The flutes are cut at a 25° helix.\u003c\/p\u003e\u003cp\u003eThis is a rougher: the chip-breaking edge form cuts the cutting pressure and breaks the chip into short pieces, so it removes stock faster than a finishing tool at the same power.\u003c\/p\u003e\u003cp\u003eAlTiN is built for heat: stainless, tool steels and high-temperature alloys, especially with little or no coolant.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting diameter:\u003c\/strong\u003e 3\/8\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank diameter:\u003c\/strong\u003e 3\/8\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of cut (LOC):\u003c\/strong\u003e 1\/2\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall length (OAL):\u003c\/strong\u003e 2-1\/2\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlutes:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd type:\u003c\/strong\u003e Single End\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix angle:\u003c\/strong\u003e 25°\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting style:\u003c\/strong\u003e Roughing \/ chip-breaking\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating:\u003c\/strong\u003e AlTiN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool material:\u003c\/strong\u003e Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e 314\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem number:\u003c\/strong\u003e 314-9609\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"fm-dispatch-notice\"\u003e\n\u003ch3\u003eAvailability and Shipping\u003c\/h3\u003e\n\u003cp\u003eFor HTC carbide tools, if the uncoated tool is available and coating is needed, estimated time to ship is 3–4 business days. If the tool is not in stock, estimated time to ship is 7–10 calendar days. For items that require manufacturing, contact us for a confirmed estimated ship date.\u003c\/p\u003e\n\u003cp\u003eUnless stated otherwise, estimated time to ship is measured in calendar days, from order placement until your order is handed to the carrier. Carrier transit time is additional. Orders may ship sooner. We accept orders awaiting replenishment; please contact us before ordering if you need a specific shipping date.\u003c\/p\u003e\n\u003cp\u003eSee our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e for details.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"HTC Mfg.","offers":[{"title":"314-9609 \/ 314 \/ AlTiN","offer_id":40353122812090,"sku":"314-9609","price":67.11,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0283\/9796\/1325\/products\/Series_314_cb0ec63f-1d34-4ad2-96d1-ba67c5422718.png?v=1793587646"},{"product_id":"314-9610","title":"3\/8\" End Mill HOG Mill Single End. Medium Pitch Knuckle Rougher. 25 Degree Helix. Chamfer Width .020\" - Shank OD 3\/8\" LOC 1\" OAL 2-1\/2\" - 4 Flutes - AlTiN Coated","description":"\u003cp\u003e\u003cstrong\u003e3\/8\" cutting diameter, 4 flutes, single end, AlTiN coated.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eGround from solid carbide. This tool cuts 3\/8\" diameter, runs a 3\/8\" shank, has 1\" of flute and measures 2-1\/2\" overall. The flutes are cut at a 25° helix.\u003c\/p\u003e\u003cp\u003eThis is a rougher: the chip-breaking edge form cuts the cutting pressure and breaks the chip into short pieces, so it removes stock faster than a finishing tool at the same power.\u003c\/p\u003e\u003cp\u003eAlTiN is built for heat: stainless, tool steels and high-temperature alloys, especially with little or no coolant.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting diameter:\u003c\/strong\u003e 3\/8\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank diameter:\u003c\/strong\u003e 3\/8\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of cut (LOC):\u003c\/strong\u003e 1\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall length (OAL):\u003c\/strong\u003e 2-1\/2\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlutes:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd type:\u003c\/strong\u003e Single End\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix angle:\u003c\/strong\u003e 25°\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting style:\u003c\/strong\u003e Roughing \/ chip-breaking\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating:\u003c\/strong\u003e AlTiN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool material:\u003c\/strong\u003e Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e 314\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem number:\u003c\/strong\u003e 314-9610\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"fm-dispatch-notice\"\u003e\n\u003ch3\u003eAvailability and Shipping\u003c\/h3\u003e\n\u003cp\u003eFor HTC carbide tools, if the uncoated tool is available and coating is needed, estimated time to ship is 3–4 business days. If the tool is not in stock, estimated time to ship is 7–10 calendar days. For items that require manufacturing, contact us for a confirmed estimated ship date.\u003c\/p\u003e\n\u003cp\u003eUnless stated otherwise, estimated time to ship is measured in calendar days, from order placement until your order is handed to the carrier. Carrier transit time is additional. Orders may ship sooner. We accept orders awaiting replenishment; please contact us before ordering if you need a specific shipping date.\u003c\/p\u003e\n\u003cp\u003eSee our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e for details.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"HTC Mfg.","offers":[{"title":"314-9610 \/ 314 \/ AlTiN","offer_id":40353122844858,"sku":"314-9610","price":71.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0283\/9796\/1325\/products\/Series_314_8603a452-db83-4fd3-bd2d-05d3b7fa0e34.png?v=1793587647"},{"product_id":"314-9611","title":"7\/16\" End Mill HOG Mill Single End. Medium Pitch Knuckle Rougher. 25 Degree Helix. Chamfer Width .020\" - Shank OD 7\/16\" LOC 9\/16\" OAL 2-3\/4\" - 4 Flutes - AlTiN Coated","description":"\u003cp\u003e\u003cstrong\u003e7\/16\" cutting diameter, 4 flutes, single end, AlTiN coated.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eGround from solid carbide. This tool cuts 7\/16\" diameter, runs a 7\/16\" shank, has 9\/16\" of flute and measures 2-3\/4\" overall. The flutes are cut at a 25° helix.\u003c\/p\u003e\u003cp\u003eThis is a rougher: the chip-breaking edge form cuts the cutting pressure and breaks the chip into short pieces, so it removes stock faster than a finishing tool at the same power.\u003c\/p\u003e\u003cp\u003eAlTiN is built for heat: stainless, tool steels and high-temperature alloys, especially with little or no coolant.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting diameter:\u003c\/strong\u003e 7\/16\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank diameter:\u003c\/strong\u003e 7\/16\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of cut (LOC):\u003c\/strong\u003e 9\/16\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall length (OAL):\u003c\/strong\u003e 2-3\/4\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlutes:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd type:\u003c\/strong\u003e Single End\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix angle:\u003c\/strong\u003e 25°\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting style:\u003c\/strong\u003e Roughing \/ chip-breaking\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating:\u003c\/strong\u003e AlTiN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool material:\u003c\/strong\u003e Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e 314\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem number:\u003c\/strong\u003e 314-9611\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"fm-dispatch-notice\"\u003e\n\u003ch3\u003eAvailability and Shipping\u003c\/h3\u003e\n\u003cp\u003eFor HTC carbide tools, if the uncoated tool is available and coating is needed, estimated time to ship is 3–4 business days. If the tool is not in stock, estimated time to ship is 7–10 calendar days. For items that require manufacturing, contact us for a confirmed estimated ship date.\u003c\/p\u003e\n\u003cp\u003eUnless stated otherwise, estimated time to ship is measured in calendar days, from order placement until your order is handed to the carrier. Carrier transit time is additional. Orders may ship sooner. We accept orders awaiting replenishment; please contact us before ordering if you need a specific shipping date.\u003c\/p\u003e\n\u003cp\u003eSee our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e for details.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"HTC Mfg.","offers":[{"title":"314-9611 \/ 314 \/ AlTiN","offer_id":40353122910394,"sku":"314-9611","price":77.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0283\/9796\/1325\/products\/Series_314_87063795-1598-4161-872f-881d2d7a7f54.png?v=1793587647"},{"product_id":"314-9612","title":"7\/16\" End Mill HOG Mill Single End. Medium Pitch Knuckle Rougher. 25 Degree Helix. Chamfer Width .020\" - Shank OD 7\/16\" LOC 1\" OAL 2-3\/4\" - 4 Flutes - AlTiN Coated","description":"\u003cp\u003e\u003cstrong\u003e7\/16\" cutting diameter, 4 flutes, single end, AlTiN coated.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eGround from solid carbide. This tool cuts 7\/16\" diameter, runs a 7\/16\" shank, has 1\" of flute and measures 2-3\/4\" overall. The flutes are cut at a 25° helix.\u003c\/p\u003e\u003cp\u003eThis is a rougher: the chip-breaking edge form cuts the cutting pressure and breaks the chip into short pieces, so it removes stock faster than a finishing tool at the same power.\u003c\/p\u003e\u003cp\u003eAlTiN is built for heat: stainless, tool steels and high-temperature alloys, especially with little or no coolant.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting diameter:\u003c\/strong\u003e 7\/16\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank diameter:\u003c\/strong\u003e 7\/16\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of cut (LOC):\u003c\/strong\u003e 1\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall length (OAL):\u003c\/strong\u003e 2-3\/4\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlutes:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd type:\u003c\/strong\u003e Single End\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix angle:\u003c\/strong\u003e 25°\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting style:\u003c\/strong\u003e Roughing \/ chip-breaking\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating:\u003c\/strong\u003e AlTiN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool material:\u003c\/strong\u003e Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e 314\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem number:\u003c\/strong\u003e 314-9612\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"fm-dispatch-notice\"\u003e\n\u003ch3\u003eAvailability and Shipping\u003c\/h3\u003e\n\u003cp\u003eFor HTC carbide tools, if the uncoated tool is available and coating is needed, estimated time to ship is 3–4 business days. If the tool is not in stock, estimated time to ship is 7–10 calendar days. For items that require manufacturing, contact us for a confirmed estimated ship date.\u003c\/p\u003e\n\u003cp\u003eUnless stated otherwise, estimated time to ship is measured in calendar days, from order placement until your order is handed to the carrier. Carrier transit time is additional. Orders may ship sooner. We accept orders awaiting replenishment; please contact us before ordering if you need a specific shipping date.\u003c\/p\u003e\n\u003cp\u003eSee our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e for details.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"HTC Mfg.","offers":[{"title":"314-9612 \/ 314 \/ AlTiN","offer_id":40353122943162,"sku":"314-9612","price":84.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0283\/9796\/1325\/products\/Series_314_b4412f4a-83bc-4e18-9b0a-6b393bd70cb0.png?v=1793587646"},{"product_id":"314-9613","title":"1\/2\" End Mill HOG Mill Single End. Medium Pitch Knuckle Rougher. 25 Degree Helix. Chamfer Width .025\" - Shank OD 1\/2\" LOC 5\/8\" OAL 3\" - 4 Flutes - AlTiN Coated","description":"\u003cp\u003e\u003cstrong\u003e1\/2\" cutting diameter, 4 flutes, single end, AlTiN coated.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eGround from solid carbide. This tool cuts 1\/2\" diameter, runs a 1\/2\" shank, has 5\/8\" of flute and measures 3\" overall. The flutes are cut at a 25° helix.\u003c\/p\u003e\u003cp\u003eThis is a rougher: the chip-breaking edge form cuts the cutting pressure and breaks the chip into short pieces, so it removes stock faster than a finishing tool at the same power.\u003c\/p\u003e\u003cp\u003eAlTiN is built for heat: stainless, tool steels and high-temperature alloys, especially with little or no coolant.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting diameter:\u003c\/strong\u003e 1\/2\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank diameter:\u003c\/strong\u003e 1\/2\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of cut (LOC):\u003c\/strong\u003e 5\/8\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall length (OAL):\u003c\/strong\u003e 3\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlutes:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd type:\u003c\/strong\u003e Single End\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix angle:\u003c\/strong\u003e 25°\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting style:\u003c\/strong\u003e Roughing \/ chip-breaking\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating:\u003c\/strong\u003e AlTiN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool material:\u003c\/strong\u003e Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e 314\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem number:\u003c\/strong\u003e 314-9613\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"fm-dispatch-notice\"\u003e\n\u003ch3\u003eAvailability and Shipping\u003c\/h3\u003e\n\u003cp\u003eFor HTC carbide tools, if the uncoated tool is available and coating is needed, estimated time to ship is 3–4 business days. If the tool is not in stock, estimated time to ship is 7–10 calendar days. For items that require manufacturing, contact us for a confirmed estimated ship date.\u003c\/p\u003e\n\u003cp\u003eUnless stated otherwise, estimated time to ship is measured in calendar days, from order placement until your order is handed to the carrier. Carrier transit time is additional. Orders may ship sooner. We accept orders awaiting replenishment; please contact us before ordering if you need a specific shipping date.\u003c\/p\u003e\n\u003cp\u003eSee our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e for details.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"HTC Mfg.","offers":[{"title":"314-9613 \/ 314 \/ AlTiN","offer_id":40353123172538,"sku":"314-9613","price":111.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0283\/9796\/1325\/products\/Series_314_9730939a-d952-45f6-936f-aac53c4c560e.png?v=1793587646"},{"product_id":"314-9614","title":"1\/2\" End Mill HOG Mill Single End. Medium Pitch Knuckle Rougher. 25 Degree Helix. Chamfer Width .025\" - Shank OD 1\/2\" LOC 1-1\/4\" OAL 3\" - 4 Flutes - AlTiN Coated","description":"\u003cp\u003e\u003cstrong\u003e1\/2\" cutting diameter, 4 flutes, single end, AlTiN coated.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eGround from solid carbide. This tool cuts 1\/2\" diameter, runs a 1\/2\" shank, has 1-1\/4\" of flute and measures 3\" overall. The flutes are cut at a 25° helix.\u003c\/p\u003e\u003cp\u003eThis is a rougher: the chip-breaking edge form cuts the cutting pressure and breaks the chip into short pieces, so it removes stock faster than a finishing tool at the same power.\u003c\/p\u003e\u003cp\u003eAlTiN is built for heat: stainless, tool steels and high-temperature alloys, especially with little or no coolant.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting diameter:\u003c\/strong\u003e 1\/2\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank diameter:\u003c\/strong\u003e 1\/2\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of cut (LOC):\u003c\/strong\u003e 1-1\/4\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall length (OAL):\u003c\/strong\u003e 3\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlutes:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd type:\u003c\/strong\u003e Single End\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix angle:\u003c\/strong\u003e 25°\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting style:\u003c\/strong\u003e Roughing \/ chip-breaking\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating:\u003c\/strong\u003e AlTiN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool material:\u003c\/strong\u003e Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e 314\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem number:\u003c\/strong\u003e 314-9614\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"fm-dispatch-notice\"\u003e\n\u003ch3\u003eAvailability and Shipping\u003c\/h3\u003e\n\u003cp\u003eFor HTC carbide tools, if the uncoated tool is available and coating is needed, estimated time to ship is 3–4 business days. If the tool is not in stock, estimated time to ship is 7–10 calendar days. For items that require manufacturing, contact us for a confirmed estimated ship date.\u003c\/p\u003e\n\u003cp\u003eUnless stated otherwise, estimated time to ship is measured in calendar days, from order placement until your order is handed to the carrier. Carrier transit time is additional. Orders may ship sooner. We accept orders awaiting replenishment; please contact us before ordering if you need a specific shipping date.\u003c\/p\u003e\n\u003cp\u003eSee our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e for details.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"HTC Mfg.","offers":[{"title":"314-9614 \/ 314 \/ AlTiN","offer_id":40353123205306,"sku":"314-9614","price":119.11,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0283\/9796\/1325\/products\/Series_314_460e5f94-8255-47f4-9d90-870d40cd8838.png?v=1793587646"},{"product_id":"314-9615","title":"9\/16\" End Mill HOG Mill Single End. Medium Pitch Knuckle Rougher. 25 Degree Helix. Chamfer Width .025\" - Shank OD 9\/16\" LOC 1-1\/4\" OAL 3-1\/2\" - 4 Flutes - AlTiN Coated","description":"\u003cp\u003e\u003cstrong\u003e9\/16\" cutting diameter, 4 flutes, single end, AlTiN coated.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eGround from solid carbide. This tool cuts 9\/16\" diameter, runs a 9\/16\" shank, has 1-1\/4\" of flute and measures 3-1\/2\" overall. The flutes are cut at a 25° helix.\u003c\/p\u003e\u003cp\u003eThis is a rougher: the chip-breaking edge form cuts the cutting pressure and breaks the chip into short pieces, so it removes stock faster than a finishing tool at the same power.\u003c\/p\u003e\u003cp\u003eAlTiN is built for heat: stainless, tool steels and high-temperature alloys, especially with little or no coolant.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting diameter:\u003c\/strong\u003e 9\/16\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank diameter:\u003c\/strong\u003e 9\/16\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of cut (LOC):\u003c\/strong\u003e 1-1\/4\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall length (OAL):\u003c\/strong\u003e 3-1\/2\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlutes:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd type:\u003c\/strong\u003e Single End\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix angle:\u003c\/strong\u003e 25°\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting style:\u003c\/strong\u003e Roughing \/ chip-breaking\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating:\u003c\/strong\u003e AlTiN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool material:\u003c\/strong\u003e Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e 314\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem number:\u003c\/strong\u003e 314-9615\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"fm-dispatch-notice\"\u003e\n\u003ch3\u003eAvailability and Shipping\u003c\/h3\u003e\n\u003cp\u003eFor HTC carbide tools, if the uncoated tool is available and coating is needed, estimated time to ship is 3–4 business days. If the tool is not in stock, estimated time to ship is 7–10 calendar days. For items that require manufacturing, contact us for a confirmed estimated ship date.\u003c\/p\u003e\n\u003cp\u003eUnless stated otherwise, estimated time to ship is measured in calendar days, from order placement until your order is handed to the carrier. Carrier transit time is additional. Orders may ship sooner. We accept orders awaiting replenishment; please contact us before ordering if you need a specific shipping date.\u003c\/p\u003e\n\u003cp\u003eSee our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e for details.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"HTC Mfg.","offers":[{"title":"314-9615 \/ 314 \/ AlTiN","offer_id":40353123303610,"sku":"314-9615","price":135.44,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0283\/9796\/1325\/products\/Series_314_693ce816-bd87-491a-a1a5-f34e488cff50.png?v=1793587646"},{"product_id":"314-9616","title":"5\/8\" End Mill HOG Mill Single End. Medium Pitch Knuckle Rougher. 25 Degree Helix. Chamfer Width .025\" - Shank OD 5\/8\" LOC 3\/4\" OAL 3-1\/2\" - 4 Flutes - AlTiN Coated","description":"\u003cp\u003e\u003cstrong\u003e5\/8\" cutting diameter, 4 flutes, single end, AlTiN coated.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eGround from solid carbide. This tool cuts 5\/8\" diameter, runs a 5\/8\" shank, has 3\/4\" of flute and measures 3-1\/2\" overall. The flutes are cut at a 25° helix.\u003c\/p\u003e\u003cp\u003eThis is a rougher: the chip-breaking edge form cuts the cutting pressure and breaks the chip into short pieces, so it removes stock faster than a finishing tool at the same power.\u003c\/p\u003e\u003cp\u003eAlTiN is built for heat: stainless, tool steels and high-temperature alloys, especially with little or no coolant.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting diameter:\u003c\/strong\u003e 5\/8\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank diameter:\u003c\/strong\u003e 5\/8\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of cut (LOC):\u003c\/strong\u003e 3\/4\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall length (OAL):\u003c\/strong\u003e 3-1\/2\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlutes:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd type:\u003c\/strong\u003e Single End\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix angle:\u003c\/strong\u003e 25°\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting style:\u003c\/strong\u003e Roughing \/ chip-breaking\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating:\u003c\/strong\u003e AlTiN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool material:\u003c\/strong\u003e Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e 314\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem number:\u003c\/strong\u003e 314-9616\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"fm-dispatch-notice\"\u003e\n\u003ch3\u003eAvailability and Shipping\u003c\/h3\u003e\n\u003cp\u003eFor HTC carbide tools, if the uncoated tool is available and coating is needed, estimated time to ship is 3–4 business days. If the tool is not in stock, estimated time to ship is 7–10 calendar days. For items that require manufacturing, contact us for a confirmed estimated ship date.\u003c\/p\u003e\n\u003cp\u003eUnless stated otherwise, estimated time to ship is measured in calendar days, from order placement until your order is handed to the carrier. Carrier transit time is additional. Orders may ship sooner. We accept orders awaiting replenishment; please contact us before ordering if you need a specific shipping date.\u003c\/p\u003e\n\u003cp\u003eSee our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e for details.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"HTC Mfg.","offers":[{"title":"314-9616 \/ 314 \/ AlTiN","offer_id":40353123336378,"sku":"314-9616","price":142.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0283\/9796\/1325\/products\/Series_314_7c8be7eb-3a47-44ac-85d9-271deb05dc46.png?v=1793587646"},{"product_id":"314-9617","title":"5\/8\" End Mill HOG Mill Single End. Medium Pitch Knuckle Rougher. 25 Degree Helix. Chamfer Width .025\" - Shank OD 5\/8\" LOC 1-5\/8\" OAL 3-1\/2\" - 4 Flutes - AlTiN Coated","description":"\u003cp\u003e\u003cstrong\u003e5\/8\" cutting diameter, 4 flutes, single end, AlTiN coated.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eGround from solid carbide. This tool cuts 5\/8\" diameter, runs a 5\/8\" shank, has 1-5\/8\" of flute and measures 3-1\/2\" overall. The flutes are cut at a 25° helix.\u003c\/p\u003e\u003cp\u003eThis is a rougher: the chip-breaking edge form cuts the cutting pressure and breaks the chip into short pieces, so it removes stock faster than a finishing tool at the same power.\u003c\/p\u003e\u003cp\u003eAlTiN is built for heat: stainless, tool steels and high-temperature alloys, especially with little or no coolant.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting diameter:\u003c\/strong\u003e 5\/8\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank diameter:\u003c\/strong\u003e 5\/8\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of cut (LOC):\u003c\/strong\u003e 1-5\/8\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall length (OAL):\u003c\/strong\u003e 3-1\/2\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlutes:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd type:\u003c\/strong\u003e Single End\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix angle:\u003c\/strong\u003e 25°\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting style:\u003c\/strong\u003e Roughing \/ chip-breaking\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating:\u003c\/strong\u003e AlTiN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool material:\u003c\/strong\u003e Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e 314\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem number:\u003c\/strong\u003e 314-9617\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"fm-dispatch-notice\"\u003e\n\u003ch3\u003eAvailability and Shipping\u003c\/h3\u003e\n\u003cp\u003eFor HTC carbide tools, if the uncoated tool is available and coating is needed, estimated time to ship is 3–4 business days. If the tool is not in stock, estimated time to ship is 7–10 calendar days. For items that require manufacturing, contact us for a confirmed estimated ship date.\u003c\/p\u003e\n\u003cp\u003eUnless stated otherwise, estimated time to ship is measured in calendar days, from order placement until your order is handed to the carrier. Carrier transit time is additional. Orders may ship sooner. We accept orders awaiting replenishment; please contact us before ordering if you need a specific shipping date.\u003c\/p\u003e\n\u003cp\u003eSee our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e for details.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"HTC Mfg.","offers":[{"title":"314-9617 \/ 314 \/ AlTiN","offer_id":40353123401914,"sku":"314-9617","price":152.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0283\/9796\/1325\/products\/Series_314_104722e1-269f-4b12-8894-0c08d867d3bf.png?v=1793587646"},{"product_id":"314-9618","title":"3\/4\" End Mill HOG Mill Single End. Medium Pitch Knuckle Rougher. 25 Degree Helix. Chamfer Width .025\" - Shank OD 3\/4\" LOC 1\" OAL 4\" - 4 Flutes - AlTiN Coated","description":"\u003cp\u003e\u003cstrong\u003e3\/4\" cutting diameter, 4 flutes, single end, AlTiN coated.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eGround from solid carbide. This tool cuts 3\/4\" diameter, runs a 3\/4\" shank, has 1\" of flute and measures 4\" overall. The flutes are cut at a 25° helix.\u003c\/p\u003e\u003cp\u003eThis is a rougher: the chip-breaking edge form cuts the cutting pressure and breaks the chip into short pieces, so it removes stock faster than a finishing tool at the same power.\u003c\/p\u003e\u003cp\u003eAlTiN is built for heat: stainless, tool steels and high-temperature alloys, especially with little or no coolant.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting diameter:\u003c\/strong\u003e 3\/4\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank diameter:\u003c\/strong\u003e 3\/4\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of cut (LOC):\u003c\/strong\u003e 1\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall length (OAL):\u003c\/strong\u003e 4\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlutes:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd type:\u003c\/strong\u003e Single End\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix angle:\u003c\/strong\u003e 25°\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting style:\u003c\/strong\u003e Roughing \/ chip-breaking\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating:\u003c\/strong\u003e AlTiN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool material:\u003c\/strong\u003e Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e 314\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem number:\u003c\/strong\u003e 314-9618\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"fm-dispatch-notice\"\u003e\n\u003ch3\u003eAvailability and Shipping\u003c\/h3\u003e\n\u003cp\u003eFor HTC carbide tools, if the uncoated tool is available and coating is needed, estimated time to ship is 3–4 business days. If the tool is not in stock, estimated time to ship is 7–10 calendar days. For items that require manufacturing, contact us for a confirmed estimated ship date.\u003c\/p\u003e\n\u003cp\u003eUnless stated otherwise, estimated time to ship is measured in calendar days, from order placement until your order is handed to the carrier. Carrier transit time is additional. Orders may ship sooner. We accept orders awaiting replenishment; please contact us before ordering if you need a specific shipping date.\u003c\/p\u003e\n\u003cp\u003eSee our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e for details.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"HTC Mfg.","offers":[{"title":"314-9618 \/ 314 \/ AlTiN","offer_id":40353125269690,"sku":"314-9618","price":275.73,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0283\/9796\/1325\/products\/Series_314_4cba77bc-bada-4eb8-974a-a415683c39af.png?v=1793587647"},{"product_id":"314-9619","title":"3\/4\" End Mill HOG Mill Single End. Medium Pitch Knuckle Rougher. 25 Degree Helix. Chamfer Width .025\" - Shank OD 3\/4\" LOC 1-5\/8\" OAL 4\" - 4 Flutes - AlTiN Coated","description":"\u003cp\u003e\u003cstrong\u003e3\/4\" cutting diameter, 4 flutes, single end, AlTiN coated.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eGround from solid carbide. This tool cuts 3\/4\" diameter, runs a 3\/4\" shank, has 1-5\/8\" of flute and measures 4\" overall. The flutes are cut at a 25° helix.\u003c\/p\u003e\u003cp\u003eThis is a rougher: the chip-breaking edge form cuts the cutting pressure and breaks the chip into short pieces, so it removes stock faster than a finishing tool at the same power.\u003c\/p\u003e\u003cp\u003eAlTiN is built for heat: stainless, tool steels and high-temperature alloys, especially with little or no coolant.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting diameter:\u003c\/strong\u003e 3\/4\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank diameter:\u003c\/strong\u003e 3\/4\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of cut (LOC):\u003c\/strong\u003e 1-5\/8\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall length (OAL):\u003c\/strong\u003e 4\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlutes:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd type:\u003c\/strong\u003e Single End\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix angle:\u003c\/strong\u003e 25°\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting style:\u003c\/strong\u003e Roughing \/ chip-breaking\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating:\u003c\/strong\u003e AlTiN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool material:\u003c\/strong\u003e Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e 314\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem number:\u003c\/strong\u003e 314-9619\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"fm-dispatch-notice\"\u003e\n\u003ch3\u003eAvailability and Shipping\u003c\/h3\u003e\n\u003cp\u003eFor HTC carbide tools, if the uncoated tool is available and coating is needed, estimated time to ship is 3–4 business days. If the tool is not in stock, estimated time to ship is 7–10 calendar days. For items that require manufacturing, contact us for a confirmed estimated ship date.\u003c\/p\u003e\n\u003cp\u003eUnless stated otherwise, estimated time to ship is measured in calendar days, from order placement until your order is handed to the carrier. Carrier transit time is additional. Orders may ship sooner. We accept orders awaiting replenishment; please contact us before ordering if you need a specific shipping date.\u003c\/p\u003e\n\u003cp\u003eSee our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e for details.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"HTC Mfg.","offers":[{"title":"314-9619 \/ 314 \/ AlTiN","offer_id":40353125302458,"sku":"314-9619","price":294.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0283\/9796\/1325\/products\/Series_314_9a26a6e0-9faa-4b4c-8214-6bf304cc071f.png?v=1793587647"},{"product_id":"314-9620","title":"1\" End Mill HOG Mill Single End. Medium Pitch Knuckle Rougher. 25 Degree Helix. Chamfer Width .025\" - Shank OD 1\" LOC 1-1\/4\" OAL 4\" - 6 Flutes - AlTiN Coated","description":"\u003cp\u003e\u003cstrong\u003e1\" cutting diameter, 6 flutes, single end, AlTiN coated.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eGround from solid carbide. This tool cuts 1\" diameter, runs a 1\" shank, has 1-1\/4\" of flute and measures 4\" overall. The flutes are cut at a 25° helix.\u003c\/p\u003e\u003cp\u003eThis is a rougher: the chip-breaking edge form cuts the cutting pressure and breaks the chip into short pieces, so it removes stock faster than a finishing tool at the same power.\u003c\/p\u003e\u003cp\u003eAlTiN is built for heat: stainless, tool steels and high-temperature alloys, especially with little or no coolant.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting diameter:\u003c\/strong\u003e 1\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank diameter:\u003c\/strong\u003e 1\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of cut (LOC):\u003c\/strong\u003e 1-1\/4\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall length (OAL):\u003c\/strong\u003e 4\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlutes:\u003c\/strong\u003e 6\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd type:\u003c\/strong\u003e Single End\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix angle:\u003c\/strong\u003e 25°\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting style:\u003c\/strong\u003e Roughing \/ chip-breaking\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating:\u003c\/strong\u003e AlTiN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool material:\u003c\/strong\u003e Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e 314\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem number:\u003c\/strong\u003e 314-9620\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"fm-dispatch-notice\"\u003e\n\u003ch3\u003eAvailability and Shipping\u003c\/h3\u003e\n\u003cp\u003eFor HTC carbide tools, if the uncoated tool is available and coating is needed, estimated time to ship is 3–4 business days. If the tool is not in stock, estimated time to ship is 7–10 calendar days. For items that require manufacturing, contact us for a confirmed estimated ship date.\u003c\/p\u003e\n\u003cp\u003eUnless stated otherwise, estimated time to ship is measured in calendar days, from order placement until your order is handed to the carrier. Carrier transit time is additional. Orders may ship sooner. We accept orders awaiting replenishment; please contact us before ordering if you need a specific shipping date.\u003c\/p\u003e\n\u003cp\u003eSee our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e for details.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"HTC Mfg.","offers":[{"title":"314-9620 \/ 314 \/ AlTiN","offer_id":40353125335226,"sku":"314-9620","price":435.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0283\/9796\/1325\/products\/Series_314_f8f61ce5-e4a1-431a-8871-c35fce02da44.png?v=1793587646"},{"product_id":"314-9621","title":"1\" End Mill HOG Mill Single End. Medium Pitch Knuckle Rougher. 25 Degree Helix. Chamfer Width .025\" - Shank OD 1\" LOC 2\" OAL 4\" - 6 Flutes - AlTiN Coated","description":"\u003cp\u003e\u003cstrong\u003e1\" cutting diameter, 6 flutes, single end, AlTiN coated.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eGround from solid carbide. This tool cuts 1\" diameter, runs a 1\" shank, has 2\" of flute and measures 4\" overall. The flutes are cut at a 25° helix.\u003c\/p\u003e\u003cp\u003eThis is a rougher: the chip-breaking edge form cuts the cutting pressure and breaks the chip into short pieces, so it removes stock faster than a finishing tool at the same power.\u003c\/p\u003e\u003cp\u003eAlTiN is built for heat: stainless, tool steels and high-temperature alloys, especially with little or no coolant.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting diameter:\u003c\/strong\u003e 1\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank diameter:\u003c\/strong\u003e 1\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of cut (LOC):\u003c\/strong\u003e 2\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall length (OAL):\u003c\/strong\u003e 4\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlutes:\u003c\/strong\u003e 6\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd type:\u003c\/strong\u003e Single End\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix angle:\u003c\/strong\u003e 25°\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting style:\u003c\/strong\u003e Roughing \/ chip-breaking\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating:\u003c\/strong\u003e AlTiN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool material:\u003c\/strong\u003e Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e 314\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem number:\u003c\/strong\u003e 314-9621\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"fm-dispatch-notice\"\u003e\n\u003ch3\u003eAvailability and Shipping\u003c\/h3\u003e\n\u003cp\u003eFor HTC carbide tools, if the uncoated tool is available and coating is needed, estimated time to ship is 3–4 business days. If the tool is not in stock, estimated time to ship is 7–10 calendar days. For items that require manufacturing, contact us for a confirmed estimated ship date.\u003c\/p\u003e\n\u003cp\u003eUnless stated otherwise, estimated time to ship is measured in calendar days, from order placement until your order is handed to the carrier. Carrier transit time is additional. Orders may ship sooner. We accept orders awaiting replenishment; please contact us before ordering if you need a specific shipping date.\u003c\/p\u003e\n\u003cp\u003eSee our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e for details.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"HTC Mfg.","offers":[{"title":"314-9621 \/ 314 \/ AlTiN","offer_id":40353125367994,"sku":"314-9621","price":464.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0283\/9796\/1325\/products\/Series_314_9be68811-a30c-4d0c-a195-a0c4c4a615cb.png?v=1793587646"},{"product_id":"315-5212","title":"1\/4\" End Mill HOG Mill Single End. Medium Pitch Knuckle Rougher 35 Degree Helix. Shank OD 1\/4\" LOC 3\/8\" OAL 2-1\/2\" - 3 Flutes - Uncoated","description":"\u003cp\u003e\u003cstrong\u003e1\/4\" cutting diameter, 3 flutes, single end, uncoated.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eGround from solid carbide. This tool cuts 1\/4\" diameter, runs a 1\/4\" shank, has 3\/8\" of flute and measures 2-1\/2\" overall. The flutes are cut at a 35° helix.\u003c\/p\u003e\u003cp\u003eThis is a rougher: the chip-breaking edge form cuts the cutting pressure and breaks the chip into short pieces, so it removes stock faster than a finishing tool at the same power.\u003c\/p\u003e\u003cp\u003eUncoated, so the edge stays as sharp as it can be ground — the usual choice for aluminum and other soft, sticky materials.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting diameter:\u003c\/strong\u003e 1\/4\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank diameter:\u003c\/strong\u003e 1\/4\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of cut (LOC):\u003c\/strong\u003e 3\/8\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall length (OAL):\u003c\/strong\u003e 2-1\/2\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlutes:\u003c\/strong\u003e 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd type:\u003c\/strong\u003e Single End\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix angle:\u003c\/strong\u003e 35°\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting style:\u003c\/strong\u003e Roughing \/ chip-breaking\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating:\u003c\/strong\u003e Uncoated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool material:\u003c\/strong\u003e Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e 315\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem number:\u003c\/strong\u003e 315-5212\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"fm-dispatch-notice\"\u003e\n\u003ch3\u003eAvailability and Shipping\u003c\/h3\u003e\n\u003cp\u003eFor HTC carbide tools, if the uncoated tool is available and coating is needed, estimated time to ship is 3–4 business days. If the tool is not in stock, estimated time to ship is 7–10 calendar days. For items that require manufacturing, contact us for a confirmed estimated ship date.\u003c\/p\u003e\n\u003cp\u003eUnless stated otherwise, estimated time to ship is measured in calendar days, from order placement until your order is handed to the carrier. Carrier transit time is additional. Orders may ship sooner. We accept orders awaiting replenishment; please contact us before ordering if you need a specific shipping date.\u003c\/p\u003e\n\u003cp\u003eSee our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e for details.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"HTC Mfg.","offers":[{"title":"315-5212 \/ 315 \/ Uncoated","offer_id":40353125466298,"sku":"315-5212","price":45.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0283\/9796\/1325\/products\/Series_315.png?v=1793587743"},{"product_id":"315-5312","title":"1\/4\" End Mill HOG Mill Single End. Medium Pitch Knuckle Rougher 35 Degree Helix. Shank OD 1\/4\" LOC 3\/4\" OAL 2-1\/2\" - 3 Flutes - Uncoated","description":"\u003cp\u003e\u003cstrong\u003e1\/4\" cutting diameter, 3 flutes, single end, uncoated.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eGround from solid carbide. This tool cuts 1\/4\" diameter, runs a 1\/4\" shank, has 3\/4\" of flute and measures 2-1\/2\" overall. The flutes are cut at a 35° helix.\u003c\/p\u003e\u003cp\u003eThis is a rougher: the chip-breaking edge form cuts the cutting pressure and breaks the chip into short pieces, so it removes stock faster than a finishing tool at the same power.\u003c\/p\u003e\u003cp\u003eUncoated, so the edge stays as sharp as it can be ground — the usual choice for aluminum and other soft, sticky materials.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting diameter:\u003c\/strong\u003e 1\/4\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank diameter:\u003c\/strong\u003e 1\/4\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of cut (LOC):\u003c\/strong\u003e 3\/4\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall length (OAL):\u003c\/strong\u003e 2-1\/2\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlutes:\u003c\/strong\u003e 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd type:\u003c\/strong\u003e Single End\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix angle:\u003c\/strong\u003e 35°\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting style:\u003c\/strong\u003e Roughing \/ chip-breaking\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating:\u003c\/strong\u003e Uncoated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool material:\u003c\/strong\u003e Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e 315\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem number:\u003c\/strong\u003e 315-5312\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"fm-dispatch-notice\"\u003e\n\u003ch3\u003eAvailability and Shipping\u003c\/h3\u003e\n\u003cp\u003eFor HTC carbide tools, if the uncoated tool is available and coating is needed, estimated time to ship is 3–4 business days. If the tool is not in stock, estimated time to ship is 7–10 calendar days. For items that require manufacturing, contact us for a confirmed estimated ship date.\u003c\/p\u003e\n\u003cp\u003eUnless stated otherwise, estimated time to ship is measured in calendar days, from order placement until your order is handed to the carrier. Carrier transit time is additional. Orders may ship sooner. We accept orders awaiting replenishment; please contact us before ordering if you need a specific shipping date.\u003c\/p\u003e\n\u003cp\u003eSee our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e for details.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"HTC Mfg.","offers":[{"title":"315-5312 \/ 315 \/ Uncoated","offer_id":40353125499066,"sku":"315-5312","price":49.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0283\/9796\/1325\/products\/Series_315_67bd92a5-3ce5-40c7-9f7d-46fbfacbf3e9.png?v=1793587743"},{"product_id":"315-5216","title":"5\/16\" End Mill HOG Mill Single End. Medium Pitch Knuckle Rougher 35 Degree Helix. Shank OD 5\/16\" LOC 7\/16\" OAL 2-1\/2\" - 3 Flutes - Uncoated","description":"\u003cp\u003e\u003cstrong\u003e5\/16\" cutting diameter, 3 flutes, single end, uncoated.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eGround from solid carbide. This tool cuts 5\/16\" diameter, runs a 5\/16\" shank, has 7\/16\" of flute and measures 2-1\/2\" overall. The flutes are cut at a 35° helix.\u003c\/p\u003e\u003cp\u003eThis is a rougher: the chip-breaking edge form cuts the cutting pressure and breaks the chip into short pieces, so it removes stock faster than a finishing tool at the same power.\u003c\/p\u003e\u003cp\u003eUncoated, so the edge stays as sharp as it can be ground — the usual choice for aluminum and other soft, sticky materials.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting diameter:\u003c\/strong\u003e 5\/16\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank diameter:\u003c\/strong\u003e 5\/16\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of cut (LOC):\u003c\/strong\u003e 7\/16\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall length (OAL):\u003c\/strong\u003e 2-1\/2\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlutes:\u003c\/strong\u003e 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd type:\u003c\/strong\u003e Single End\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix angle:\u003c\/strong\u003e 35°\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting style:\u003c\/strong\u003e Roughing \/ chip-breaking\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating:\u003c\/strong\u003e Uncoated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool material:\u003c\/strong\u003e Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e 315\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem number:\u003c\/strong\u003e 315-5216\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"fm-dispatch-notice\"\u003e\n\u003ch3\u003eAvailability and Shipping\u003c\/h3\u003e\n\u003cp\u003eFor HTC carbide tools, if the uncoated tool is available and coating is needed, estimated time to ship is 3–4 business days. If the tool is not in stock, estimated time to ship is 7–10 calendar days. For items that require manufacturing, contact us for a confirmed estimated ship date.\u003c\/p\u003e\n\u003cp\u003eUnless stated otherwise, estimated time to ship is measured in calendar days, from order placement until your order is handed to the carrier. Carrier transit time is additional. Orders may ship sooner. We accept orders awaiting replenishment; please contact us before ordering if you need a specific shipping date.\u003c\/p\u003e\n\u003cp\u003eSee our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e for details.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"HTC Mfg.","offers":[{"title":"315-5216 \/ 315 \/ Uncoated","offer_id":40353125564602,"sku":"315-5216","price":49.04,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0283\/9796\/1325\/products\/Series_315_e1b2e1f7-e848-4a25-8300-7c69c9d88322.png?v=1793587743"},{"product_id":"315-5316","title":"5\/16\" End Mill HOG Mill Single End. Medium Pitch Knuckle Rougher 35 Degree Helix. Shank OD 5\/16\" LOC 13\/16\" OAL 2-1\/2\" - 3 Flutes - Uncoated","description":"\u003cp\u003e\u003cstrong\u003e5\/16\" cutting diameter, 3 flutes, single end, uncoated.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eGround from solid carbide. This tool cuts 5\/16\" diameter, runs a 5\/16\" shank, has 13\/16\" of flute and measures 2-1\/2\" overall. The flutes are cut at a 35° helix.\u003c\/p\u003e\u003cp\u003eThis is a rougher: the chip-breaking edge form cuts the cutting pressure and breaks the chip into short pieces, so it removes stock faster than a finishing tool at the same power.\u003c\/p\u003e\u003cp\u003eUncoated, so the edge stays as sharp as it can be ground — the usual choice for aluminum and other soft, sticky materials.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting diameter:\u003c\/strong\u003e 5\/16\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank diameter:\u003c\/strong\u003e 5\/16\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of cut (LOC):\u003c\/strong\u003e 13\/16\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall length (OAL):\u003c\/strong\u003e 2-1\/2\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlutes:\u003c\/strong\u003e 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd type:\u003c\/strong\u003e Single End\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix angle:\u003c\/strong\u003e 35°\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting style:\u003c\/strong\u003e Roughing \/ chip-breaking\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating:\u003c\/strong\u003e Uncoated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool material:\u003c\/strong\u003e Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e 315\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem number:\u003c\/strong\u003e 315-5316\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"fm-dispatch-notice\"\u003e\n\u003ch3\u003eAvailability and Shipping\u003c\/h3\u003e\n\u003cp\u003eFor HTC carbide tools, if the uncoated tool is available and coating is needed, estimated time to ship is 3–4 business days. If the tool is not in stock, estimated time to ship is 7–10 calendar days. For items that require manufacturing, contact us for a confirmed estimated ship date.\u003c\/p\u003e\n\u003cp\u003eUnless stated otherwise, estimated time to ship is measured in calendar days, from order placement until your order is handed to the carrier. Carrier transit time is additional. Orders may ship sooner. We accept orders awaiting replenishment; please contact us before ordering if you need a specific shipping date.\u003c\/p\u003e\n\u003cp\u003eSee our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e for details.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"HTC Mfg.","offers":[{"title":"315-5316 \/ 315 \/ Uncoated","offer_id":40353125630138,"sku":"315-5316","price":55.11,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0283\/9796\/1325\/products\/Series_315_ddf89504-dbcd-45fa-9130-aae8b1db3315.png?v=1793587742"},{"product_id":"315-5220","title":"3\/8\" End Mill HOG Mill Single End. Medium Pitch Knuckle Rougher 35 Degree Helix. Shank OD 3\/8\" LOC 1\/2\" OAL 2-1\/2\" - 3 Flutes - Uncoated","description":"\u003cp\u003e\u003cstrong\u003e3\/8\" cutting diameter, 3 flutes, single end, uncoated.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eGround from solid carbide. This tool cuts 3\/8\" diameter, runs a 3\/8\" shank, has 1\/2\" of flute and measures 2-1\/2\" overall. The flutes are cut at a 35° helix.\u003c\/p\u003e\u003cp\u003eThis is a rougher: the chip-breaking edge form cuts the cutting pressure and breaks the chip into short pieces, so it removes stock faster than a finishing tool at the same power.\u003c\/p\u003e\u003cp\u003eUncoated, so the edge stays as sharp as it can be ground — the usual choice for aluminum and other soft, sticky materials.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting diameter:\u003c\/strong\u003e 3\/8\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank diameter:\u003c\/strong\u003e 3\/8\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of cut (LOC):\u003c\/strong\u003e 1\/2\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall length (OAL):\u003c\/strong\u003e 2-1\/2\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlutes:\u003c\/strong\u003e 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd type:\u003c\/strong\u003e Single End\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix angle:\u003c\/strong\u003e 35°\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting style:\u003c\/strong\u003e Roughing \/ chip-breaking\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating:\u003c\/strong\u003e Uncoated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool material:\u003c\/strong\u003e Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e 315\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem number:\u003c\/strong\u003e 315-5220\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"fm-dispatch-notice\"\u003e\n\u003ch3\u003eAvailability and Shipping\u003c\/h3\u003e\n\u003cp\u003eFor HTC carbide tools, if the uncoated tool is available and coating is needed, estimated time to ship is 3–4 business days. If the tool is not in stock, estimated time to ship is 7–10 calendar days. For items that require manufacturing, contact us for a confirmed estimated ship date.\u003c\/p\u003e\n\u003cp\u003eUnless stated otherwise, estimated time to ship is measured in calendar days, from order placement until your order is handed to the carrier. Carrier transit time is additional. Orders may ship sooner. We accept orders awaiting replenishment; please contact us before ordering if you need a specific shipping date.\u003c\/p\u003e\n\u003cp\u003eSee our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e for details.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"HTC Mfg.","offers":[{"title":"315-5220 \/ 315 \/ Uncoated","offer_id":40353128284346,"sku":"315-5220","price":63.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0283\/9796\/1325\/products\/Series_315_5baf9d19-469d-4f8c-9dd0-7e7d4e3de073.png?v=1793587742"},{"product_id":"315-5320","title":"3\/8\" End Mill HOG Mill Single End. Medium Pitch Knuckle Rougher 35 Degree Helix. Shank OD 3\/8\" LOC 1\" OAL 2-1\/2\" - 3 Flutes - Uncoated","description":"\u003cp\u003e\u003cstrong\u003e3\/8\" cutting diameter, 3 flutes, single end, uncoated.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eGround from solid carbide. This tool cuts 3\/8\" diameter, runs a 3\/8\" shank, has 1\" of flute and measures 2-1\/2\" overall. The flutes are cut at a 35° helix.\u003c\/p\u003e\u003cp\u003eThis is a rougher: the chip-breaking edge form cuts the cutting pressure and breaks the chip into short pieces, so it removes stock faster than a finishing tool at the same power.\u003c\/p\u003e\u003cp\u003eUncoated, so the edge stays as sharp as it can be ground — the usual choice for aluminum and other soft, sticky materials.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting diameter:\u003c\/strong\u003e 3\/8\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank diameter:\u003c\/strong\u003e 3\/8\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of cut (LOC):\u003c\/strong\u003e 1\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall length (OAL):\u003c\/strong\u003e 2-1\/2\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlutes:\u003c\/strong\u003e 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd type:\u003c\/strong\u003e Single End\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix angle:\u003c\/strong\u003e 35°\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting style:\u003c\/strong\u003e Roughing \/ chip-breaking\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating:\u003c\/strong\u003e Uncoated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool material:\u003c\/strong\u003e Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e 315\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem number:\u003c\/strong\u003e 315-5320\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"fm-dispatch-notice\"\u003e\n\u003ch3\u003eAvailability and Shipping\u003c\/h3\u003e\n\u003cp\u003eFor HTC carbide tools, if the uncoated tool is available and coating is needed, estimated time to ship is 3–4 business days. If the tool is not in stock, estimated time to ship is 7–10 calendar days. For items that require manufacturing, contact us for a confirmed estimated ship date.\u003c\/p\u003e\n\u003cp\u003eUnless stated otherwise, estimated time to ship is measured in calendar days, from order placement until your order is handed to the carrier. Carrier transit time is additional. Orders may ship sooner. We accept orders awaiting replenishment; please contact us before ordering if you need a specific shipping date.\u003c\/p\u003e\n\u003cp\u003eSee our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e for details.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"HTC Mfg.","offers":[{"title":"315-5320 \/ 315 \/ Uncoated","offer_id":40353128349882,"sku":"315-5320","price":68.28,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0283\/9796\/1325\/products\/Series_315_ab5335b7-181e-44cb-869d-cc910758f688.png?v=1793587742"},{"product_id":"315-5225","title":"7\/16\" End Mill HOG Mill Single End. Medium Pitch Knuckle Rougher 35 Degree Helix. Shank OD 7\/16\" LOC 9\/16\" OAL 2-3\/4\" - 3 Flutes - Uncoated","description":"\u003cp\u003e\u003cstrong\u003e7\/16\" cutting diameter, 3 flutes, single end, uncoated.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eGround from solid carbide. This tool cuts 7\/16\" diameter, runs a 7\/16\" shank, has 9\/16\" of flute and measures 2-3\/4\" overall. The flutes are cut at a 35° helix.\u003c\/p\u003e\u003cp\u003eThis is a rougher: the chip-breaking edge form cuts the cutting pressure and breaks the chip into short pieces, so it removes stock faster than a finishing tool at the same power.\u003c\/p\u003e\u003cp\u003eUncoated, so the edge stays as sharp as it can be ground — the usual choice for aluminum and other soft, sticky materials.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting diameter:\u003c\/strong\u003e 7\/16\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank diameter:\u003c\/strong\u003e 7\/16\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of cut (LOC):\u003c\/strong\u003e 9\/16\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall length (OAL):\u003c\/strong\u003e 2-3\/4\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlutes:\u003c\/strong\u003e 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd type:\u003c\/strong\u003e Single End\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix angle:\u003c\/strong\u003e 35°\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting style:\u003c\/strong\u003e Roughing \/ chip-breaking\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating:\u003c\/strong\u003e Uncoated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool material:\u003c\/strong\u003e Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e 315\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem number:\u003c\/strong\u003e 315-5225\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"fm-dispatch-notice\"\u003e\n\u003ch3\u003eAvailability and Shipping\u003c\/h3\u003e\n\u003cp\u003eFor HTC carbide tools, if the uncoated tool is available and coating is needed, estimated time to ship is 3–4 business days. If the tool is not in stock, estimated time to ship is 7–10 calendar days. For items that require manufacturing, contact us for a confirmed estimated ship date.\u003c\/p\u003e\n\u003cp\u003eUnless stated otherwise, estimated time to ship is measured in calendar days, from order placement until your order is handed to the carrier. Carrier transit time is additional. Orders may ship sooner. We accept orders awaiting replenishment; please contact us before ordering if you need a specific shipping date.\u003c\/p\u003e\n\u003cp\u003eSee our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e for details.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"HTC Mfg.","offers":[{"title":"315-5225 \/ 315 \/ Uncoated","offer_id":40353128382650,"sku":"315-5225","price":74.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0283\/9796\/1325\/products\/Series_315_8584fd30-ffdd-4ca8-8457-41d97e9139ba.png?v=1793587742"},{"product_id":"315-5325","title":"7\/16\" End Mill HOG Mill Single End. Medium Pitch Knuckle Rougher 35 Degree Helix. Shank OD 7\/16\" LOC 1\" OAL 2-3\/4\" - 3 Flutes - Uncoated","description":"\u003cp\u003e\u003cstrong\u003e7\/16\" cutting diameter, 3 flutes, single end, uncoated.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eGround from solid carbide. This tool cuts 7\/16\" diameter, runs a 7\/16\" shank, has 1\" of flute and measures 2-3\/4\" overall. The flutes are cut at a 35° helix.\u003c\/p\u003e\u003cp\u003eThis is a rougher: the chip-breaking edge form cuts the cutting pressure and breaks the chip into short pieces, so it removes stock faster than a finishing tool at the same power.\u003c\/p\u003e\u003cp\u003eUncoated, so the edge stays as sharp as it can be ground — the usual choice for aluminum and other soft, sticky materials.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting diameter:\u003c\/strong\u003e 7\/16\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank diameter:\u003c\/strong\u003e 7\/16\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of cut (LOC):\u003c\/strong\u003e 1\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall length (OAL):\u003c\/strong\u003e 2-3\/4\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlutes:\u003c\/strong\u003e 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd type:\u003c\/strong\u003e Single End\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix angle:\u003c\/strong\u003e 35°\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting style:\u003c\/strong\u003e Roughing \/ chip-breaking\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating:\u003c\/strong\u003e Uncoated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool material:\u003c\/strong\u003e Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e 315\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem number:\u003c\/strong\u003e 315-5325\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"fm-dispatch-notice\"\u003e\n\u003ch3\u003eAvailability and Shipping\u003c\/h3\u003e\n\u003cp\u003eFor HTC carbide tools, if the uncoated tool is available and coating is needed, estimated time to ship is 3–4 business days. If the tool is not in stock, estimated time to ship is 7–10 calendar days. For items that require manufacturing, contact us for a confirmed estimated ship date.\u003c\/p\u003e\n\u003cp\u003eUnless stated otherwise, estimated time to ship is measured in calendar days, from order placement until your order is handed to the carrier. Carrier transit time is additional. Orders may ship sooner. We accept orders awaiting replenishment; please contact us before ordering if you need a specific shipping date.\u003c\/p\u003e\n\u003cp\u003eSee our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e for details.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"HTC Mfg.","offers":[{"title":"315-5325 \/ 315 \/ Uncoated","offer_id":40353128448186,"sku":"315-5325","price":81.66,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0283\/9796\/1325\/products\/Series_315_5d73fc6e-6549-42eb-be43-83033e4343bd.png?v=1793587742"},{"product_id":"315-5228","title":"1\/2\" End Mill HOG Mill Single End. Medium Pitch Knuckle Rougher 35 Degree Helix. Shank OD 1\/2\" LOC 5\/8\" OAL 3\" - 3 Flutes - Uncoated","description":"\u003cp\u003e\u003cstrong\u003e1\/2\" cutting diameter, 3 flutes, single end, uncoated.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eGround from solid carbide. This tool cuts 1\/2\" diameter, runs a 1\/2\" shank, has 5\/8\" of flute and measures 3\" overall. The flutes are cut at a 35° helix.\u003c\/p\u003e\u003cp\u003eThis is a rougher: the chip-breaking edge form cuts the cutting pressure and breaks the chip into short pieces, so it removes stock faster than a finishing tool at the same power.\u003c\/p\u003e\u003cp\u003eUncoated, so the edge stays as sharp as it can be ground — the usual choice for aluminum and other soft, sticky materials.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting diameter:\u003c\/strong\u003e 1\/2\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank diameter:\u003c\/strong\u003e 1\/2\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of cut (LOC):\u003c\/strong\u003e 5\/8\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall length (OAL):\u003c\/strong\u003e 3\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlutes:\u003c\/strong\u003e 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd type:\u003c\/strong\u003e Single End\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix angle:\u003c\/strong\u003e 35°\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting style:\u003c\/strong\u003e Roughing \/ chip-breaking\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating:\u003c\/strong\u003e Uncoated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool material:\u003c\/strong\u003e Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e 315\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem number:\u003c\/strong\u003e 315-5228\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"fm-dispatch-notice\"\u003e\n\u003ch3\u003eAvailability and Shipping\u003c\/h3\u003e\n\u003cp\u003eFor HTC carbide tools, if the uncoated tool is available and coating is needed, estimated time to ship is 3–4 business days. If the tool is not in stock, estimated time to ship is 7–10 calendar days. For items that require manufacturing, contact us for a confirmed estimated ship date.\u003c\/p\u003e\n\u003cp\u003eUnless stated otherwise, estimated time to ship is measured in calendar days, from order placement until your order is handed to the carrier. Carrier transit time is additional. Orders may ship sooner. We accept orders awaiting replenishment; please contact us before ordering if you need a specific shipping date.\u003c\/p\u003e\n\u003cp\u003eSee our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e for details.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"HTC Mfg.","offers":[{"title":"315-5228 \/ 315 \/ Uncoated","offer_id":40353128480954,"sku":"315-5228","price":107.18,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0283\/9796\/1325\/products\/Series_315_172ea2d9-ea4d-4531-9fc9-2a672fbbed0f.png?v=1793587743"},{"product_id":"315-5328","title":"1\/2\" End Mill HOG Mill Single End. Medium Pitch Knuckle Rougher 35 Degree Helix. Shank OD 1\/2\" LOC 1-1\/4\" OAL 3\" - 3 Flutes - Uncoated","description":"\u003cp\u003e\u003cstrong\u003e1\/2\" cutting diameter, 3 flutes, single end, uncoated.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eGround from solid carbide. This tool cuts 1\/2\" diameter, runs a 1\/2\" shank, has 1-1\/4\" of flute and measures 3\" overall. The flutes are cut at a 35° helix.\u003c\/p\u003e\u003cp\u003eThis is a rougher: the chip-breaking edge form cuts the cutting pressure and breaks the chip into short pieces, so it removes stock faster than a finishing tool at the same power.\u003c\/p\u003e\u003cp\u003eUncoated, so the edge stays as sharp as it can be ground — the usual choice for aluminum and other soft, sticky materials.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting diameter:\u003c\/strong\u003e 1\/2\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank diameter:\u003c\/strong\u003e 1\/2\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of cut (LOC):\u003c\/strong\u003e 1-1\/4\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall length (OAL):\u003c\/strong\u003e 3\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlutes:\u003c\/strong\u003e 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd type:\u003c\/strong\u003e Single End\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix angle:\u003c\/strong\u003e 35°\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting style:\u003c\/strong\u003e Roughing \/ chip-breaking\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating:\u003c\/strong\u003e Uncoated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool material:\u003c\/strong\u003e Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e 315\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem number:\u003c\/strong\u003e 315-5328\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"fm-dispatch-notice\"\u003e\n\u003ch3\u003eAvailability and Shipping\u003c\/h3\u003e\n\u003cp\u003eFor HTC carbide tools, if the uncoated tool is available and coating is needed, estimated time to ship is 3–4 business days. If the tool is not in stock, estimated time to ship is 7–10 calendar days. For items that require manufacturing, contact us for a confirmed estimated ship date.\u003c\/p\u003e\n\u003cp\u003eUnless stated otherwise, estimated time to ship is measured in calendar days, from order placement until your order is handed to the carrier. Carrier transit time is additional. Orders may ship sooner. We accept orders awaiting replenishment; please contact us before ordering if you need a specific shipping date.\u003c\/p\u003e\n\u003cp\u003eSee our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e for details.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"HTC Mfg.","offers":[{"title":"315-5328 \/ 315 \/ Uncoated","offer_id":40353128546490,"sku":"315-5328","price":114.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0283\/9796\/1325\/products\/Series_315_0f902423-0939-472e-b5be-abbec83b0edf.png?v=1793587742"},{"product_id":"315-5230","title":"5\/8\" End Mill HOG Mill Single End. Medium Pitch Knuckle Rougher 35 Degree Helix. Shank OD 5\/8\" LOC 3\/4\" OAL 3-1\/2\" - 3 Flutes - Uncoated","description":"\u003cp\u003e\u003cstrong\u003e5\/8\" cutting diameter, 3 flutes, single end, uncoated.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eGround from solid carbide. This tool cuts 5\/8\" diameter, runs a 5\/8\" shank, has 3\/4\" of flute and measures 3-1\/2\" overall. The flutes are cut at a 35° helix.\u003c\/p\u003e\u003cp\u003eThis is a rougher: the chip-breaking edge form cuts the cutting pressure and breaks the chip into short pieces, so it removes stock faster than a finishing tool at the same power.\u003c\/p\u003e\u003cp\u003eUncoated, so the edge stays as sharp as it can be ground — the usual choice for aluminum and other soft, sticky materials.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting diameter:\u003c\/strong\u003e 5\/8\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank diameter:\u003c\/strong\u003e 5\/8\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of cut (LOC):\u003c\/strong\u003e 3\/4\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall length (OAL):\u003c\/strong\u003e 3-1\/2\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlutes:\u003c\/strong\u003e 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd type:\u003c\/strong\u003e Single End\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix angle:\u003c\/strong\u003e 35°\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting style:\u003c\/strong\u003e Roughing \/ chip-breaking\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating:\u003c\/strong\u003e Uncoated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool material:\u003c\/strong\u003e Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e 315\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem number:\u003c\/strong\u003e 315-5230\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"fm-dispatch-notice\"\u003e\n\u003ch3\u003eAvailability and Shipping\u003c\/h3\u003e\n\u003cp\u003eFor HTC carbide tools, if the uncoated tool is available and coating is needed, estimated time to ship is 3–4 business days. If the tool is not in stock, estimated time to ship is 7–10 calendar days. For items that require manufacturing, contact us for a confirmed estimated ship date.\u003c\/p\u003e\n\u003cp\u003eUnless stated otherwise, estimated time to ship is measured in calendar days, from order placement until your order is handed to the carrier. Carrier transit time is additional. Orders may ship sooner. We accept orders awaiting replenishment; please contact us before ordering if you need a specific shipping date.\u003c\/p\u003e\n\u003cp\u003eSee our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e for details.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"HTC Mfg.","offers":[{"title":"315-5230 \/ 315 \/ Uncoated","offer_id":40353128612026,"sku":"315-5230","price":139.09,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0283\/9796\/1325\/products\/Series_315_51a1070a-c187-4ff3-b355-5d5c1a8369dd.png?v=1793587743"},{"product_id":"315-5330","title":"5\/8\" End Mill HOG Mill Single End. Medium Pitch Knuckle Rougher 35 Degree Helix. Shank OD 5\/8\" LOC 1-5\/8\" OAL 3-1\/2\" - 3 Flutes - Uncoated","description":"\u003cp\u003e\u003cstrong\u003e5\/8\" cutting diameter, 3 flutes, single end, uncoated.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eGround from solid carbide. This tool cuts 5\/8\" diameter, runs a 5\/8\" shank, has 1-5\/8\" of flute and measures 3-1\/2\" overall. The flutes are cut at a 35° helix.\u003c\/p\u003e\u003cp\u003eThis is a rougher: the chip-breaking edge form cuts the cutting pressure and breaks the chip into short pieces, so it removes stock faster than a finishing tool at the same power.\u003c\/p\u003e\u003cp\u003eUncoated, so the edge stays as sharp as it can be ground — the usual choice for aluminum and other soft, sticky materials.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting diameter:\u003c\/strong\u003e 5\/8\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank diameter:\u003c\/strong\u003e 5\/8\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of cut (LOC):\u003c\/strong\u003e 1-5\/8\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall length (OAL):\u003c\/strong\u003e 3-1\/2\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlutes:\u003c\/strong\u003e 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd type:\u003c\/strong\u003e Single End\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix angle:\u003c\/strong\u003e 35°\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting style:\u003c\/strong\u003e Roughing \/ chip-breaking\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating:\u003c\/strong\u003e Uncoated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool material:\u003c\/strong\u003e Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e 315\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem number:\u003c\/strong\u003e 315-5330\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"fm-dispatch-notice\"\u003e\n\u003ch3\u003eAvailability and Shipping\u003c\/h3\u003e\n\u003cp\u003eFor HTC carbide tools, if the uncoated tool is available and coating is needed, estimated time to ship is 3–4 business days. If the tool is not in stock, estimated time to ship is 7–10 calendar days. For items that require manufacturing, contact us for a confirmed estimated ship date.\u003c\/p\u003e\n\u003cp\u003eUnless stated otherwise, estimated time to ship is measured in calendar days, from order placement until your order is handed to the carrier. Carrier transit time is additional. Orders may ship sooner. We accept orders awaiting replenishment; please contact us before ordering if you need a specific shipping date.\u003c\/p\u003e\n\u003cp\u003eSee our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e for details.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"HTC Mfg.","offers":[{"title":"315-5330 \/ 315 \/ Uncoated","offer_id":40353128841402,"sku":"315-5330","price":148.79,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0283\/9796\/1325\/products\/Series_315_275aa59f-870f-4857-8075-a374f4783fcb.png?v=1793587743"},{"product_id":"315-5232","title":"3\/4\" End Mill HOG Mill Single End. Medium Pitch Knuckle Rougher 35 Degree Helix. Shank OD 3\/4\" LOC 1\" OAL 4\" - 3 Flutes - Uncoated","description":"\u003cp\u003e\u003cstrong\u003e3\/4\" cutting diameter, 3 flutes, single end, uncoated.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eGround from solid carbide. This tool cuts 3\/4\" diameter, runs a 3\/4\" shank, has 1\" of flute and measures 4\" overall. The flutes are cut at a 35° helix.\u003c\/p\u003e\u003cp\u003eThis is a rougher: the chip-breaking edge form cuts the cutting pressure and breaks the chip into short pieces, so it removes stock faster than a finishing tool at the same power.\u003c\/p\u003e\u003cp\u003eUncoated, so the edge stays as sharp as it can be ground — the usual choice for aluminum and other soft, sticky materials.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting diameter:\u003c\/strong\u003e 3\/4\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank diameter:\u003c\/strong\u003e 3\/4\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of cut (LOC):\u003c\/strong\u003e 1\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall length (OAL):\u003c\/strong\u003e 4\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlutes:\u003c\/strong\u003e 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd type:\u003c\/strong\u003e Single End\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix angle:\u003c\/strong\u003e 35°\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting style:\u003c\/strong\u003e Roughing \/ chip-breaking\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating:\u003c\/strong\u003e Uncoated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool material:\u003c\/strong\u003e Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e 315\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem number:\u003c\/strong\u003e 315-5232\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"fm-dispatch-notice\"\u003e\n\u003ch3\u003eAvailability and Shipping\u003c\/h3\u003e\n\u003cp\u003eFor HTC carbide tools, if the uncoated tool is available and coating is needed, estimated time to ship is 3–4 business days. If the tool is not in stock, estimated time to ship is 7–10 calendar days. For items that require manufacturing, contact us for a confirmed estimated ship date.\u003c\/p\u003e\n\u003cp\u003eUnless stated otherwise, estimated time to ship is measured in calendar days, from order placement until your order is handed to the carrier. Carrier transit time is additional. Orders may ship sooner. We accept orders awaiting replenishment; please contact us before ordering if you need a specific shipping date.\u003c\/p\u003e\n\u003cp\u003eSee our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e for details.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"HTC Mfg.","offers":[{"title":"315-5232 \/ 315 \/ Uncoated","offer_id":40353130086586,"sku":"315-5232","price":263.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0283\/9796\/1325\/products\/Series_315_8579bf27-6ec7-491e-8844-96b278f101b8.png?v=1793587743"},{"product_id":"315-5332","title":"3\/4\" End Mill HOG Mill Single End. Medium Pitch Knuckle Rougher 35 Degree Helix. Shank OD 3\/4\" LOC 1-5\/8\" OAL 4\" - 3 Flutes - Uncoated","description":"\u003cp\u003e\u003cstrong\u003e3\/4\" cutting diameter, 3 flutes, single end, uncoated.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eGround from solid carbide. This tool cuts 3\/4\" diameter, runs a 3\/4\" shank, has 1-5\/8\" of flute and measures 4\" overall. The flutes are cut at a 35° helix.\u003c\/p\u003e\u003cp\u003eThis is a rougher: the chip-breaking edge form cuts the cutting pressure and breaks the chip into short pieces, so it removes stock faster than a finishing tool at the same power.\u003c\/p\u003e\u003cp\u003eUncoated, so the edge stays as sharp as it can be ground — the usual choice for aluminum and other soft, sticky materials.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting diameter:\u003c\/strong\u003e 3\/4\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank diameter:\u003c\/strong\u003e 3\/4\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of cut (LOC):\u003c\/strong\u003e 1-5\/8\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall length (OAL):\u003c\/strong\u003e 4\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlutes:\u003c\/strong\u003e 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd type:\u003c\/strong\u003e Single End\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix angle:\u003c\/strong\u003e 35°\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting style:\u003c\/strong\u003e Roughing \/ chip-breaking\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating:\u003c\/strong\u003e Uncoated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool material:\u003c\/strong\u003e Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e 315\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem number:\u003c\/strong\u003e 315-5332\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"fm-dispatch-notice\"\u003e\n\u003ch3\u003eAvailability and Shipping\u003c\/h3\u003e\n\u003cp\u003eFor HTC carbide tools, if the uncoated tool is available and coating is needed, estimated time to ship is 3–4 business days. If the tool is not in stock, estimated time to ship is 7–10 calendar days. For items that require manufacturing, contact us for a confirmed estimated ship date.\u003c\/p\u003e\n\u003cp\u003eUnless stated otherwise, estimated time to ship is measured in calendar days, from order placement until your order is handed to the carrier. Carrier transit time is additional. Orders may ship sooner. We accept orders awaiting replenishment; please contact us before ordering if you need a specific shipping date.\u003c\/p\u003e\n\u003cp\u003eSee our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e for details.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"HTC Mfg.","offers":[{"title":"315-5332 \/ 315 \/ Uncoated","offer_id":40353130152122,"sku":"315-5332","price":282.17,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0283\/9796\/1325\/products\/Series_315_9ccecbc4-ec16-4a2b-836e-e572d4ad1b0c.png?v=1793587742"},{"product_id":"315-5234","title":"1\" End Mill HOG Mill Single End. Medium Pitch Knuckle Rougher 35 Degree Helix. Shank OD 1\" LOC 1-1\/4\" OAL 4\" - 3 Flutes - Uncoated","description":"\u003cp\u003e\u003cstrong\u003e1\" cutting diameter, 3 flutes, single end, uncoated.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eGround from solid carbide. This tool cuts 1\" diameter, runs a 1\" shank, has 1-1\/4\" of flute and measures 4\" overall. The flutes are cut at a 35° helix.\u003c\/p\u003e\u003cp\u003eThis is a rougher: the chip-breaking edge form cuts the cutting pressure and breaks the chip into short pieces, so it removes stock faster than a finishing tool at the same power.\u003c\/p\u003e\u003cp\u003eUncoated, so the edge stays as sharp as it can be ground — the usual choice for aluminum and other soft, sticky materials.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting diameter:\u003c\/strong\u003e 1\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank diameter:\u003c\/strong\u003e 1\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of cut (LOC):\u003c\/strong\u003e 1-1\/4\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall length (OAL):\u003c\/strong\u003e 4\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlutes:\u003c\/strong\u003e 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd type:\u003c\/strong\u003e Single End\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix angle:\u003c\/strong\u003e 35°\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting style:\u003c\/strong\u003e Roughing \/ chip-breaking\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating:\u003c\/strong\u003e Uncoated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool material:\u003c\/strong\u003e Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e 315\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem number:\u003c\/strong\u003e 315-5234\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"fm-dispatch-notice\"\u003e\n\u003ch3\u003eAvailability and Shipping\u003c\/h3\u003e\n\u003cp\u003eFor HTC carbide tools, if the uncoated tool is available and coating is needed, estimated time to ship is 3–4 business days. If the tool is not in stock, estimated time to ship is 7–10 calendar days. For items that require manufacturing, contact us for a confirmed estimated ship date.\u003c\/p\u003e\n\u003cp\u003eUnless stated otherwise, estimated time to ship is measured in calendar days, from order placement until your order is handed to the carrier. Carrier transit time is additional. Orders may ship sooner. We accept orders awaiting replenishment; please contact us before ordering if you need a specific shipping date.\u003c\/p\u003e\n\u003cp\u003eSee our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e for details.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"HTC Mfg.","offers":[{"title":"315-5234 \/ 315 \/ Uncoated","offer_id":40353130250426,"sku":"315-5234","price":423.22,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0283\/9796\/1325\/products\/Series_315_2d2804fc-693a-4fb3-ae9c-d871d0698c84.png?v=1793587742"},{"product_id":"315-5334","title":"1\" End Mill HOG Mill Single End. Medium Pitch Knuckle Rougher 35 Degree Helix. Shank OD 1\" LOC 2\" OAL 4\" - 3 Flutes - Uncoated","description":"\u003cp\u003e\u003cstrong\u003e1\" cutting diameter, 3 flutes, single end, uncoated.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eGround from solid carbide. This tool cuts 1\" diameter, runs a 1\" shank, has 2\" of flute and measures 4\" overall. The flutes are cut at a 35° helix.\u003c\/p\u003e\u003cp\u003eThis is a rougher: the chip-breaking edge form cuts the cutting pressure and breaks the chip into short pieces, so it removes stock faster than a finishing tool at the same power.\u003c\/p\u003e\u003cp\u003eUncoated, so the edge stays as sharp as it can be ground — the usual choice for aluminum and other soft, sticky materials.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting diameter:\u003c\/strong\u003e 1\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank diameter:\u003c\/strong\u003e 1\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of cut (LOC):\u003c\/strong\u003e 2\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall length (OAL):\u003c\/strong\u003e 4\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlutes:\u003c\/strong\u003e 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd type:\u003c\/strong\u003e Single End\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix angle:\u003c\/strong\u003e 35°\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting style:\u003c\/strong\u003e Roughing \/ chip-breaking\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating:\u003c\/strong\u003e Uncoated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool material:\u003c\/strong\u003e Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e 315\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem number:\u003c\/strong\u003e 315-5334\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"fm-dispatch-notice\"\u003e\n\u003ch3\u003eAvailability and Shipping\u003c\/h3\u003e\n\u003cp\u003eFor HTC carbide tools, if the uncoated tool is available and coating is needed, estimated time to ship is 3–4 business days. If the tool is not in stock, estimated time to ship is 7–10 calendar days. For items that require manufacturing, contact us for a confirmed estimated ship date.\u003c\/p\u003e\n\u003cp\u003eUnless stated otherwise, estimated time to ship is measured in calendar days, from order placement until your order is handed to the carrier. Carrier transit time is additional. Orders may ship sooner. We accept orders awaiting replenishment; please contact us before ordering if you need a specific shipping date.\u003c\/p\u003e\n\u003cp\u003eSee our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e for details.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"HTC Mfg.","offers":[{"title":"315-5334 \/ 315 \/ Uncoated","offer_id":40353130414266,"sku":"315-5334","price":452.84,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0283\/9796\/1325\/products\/Series_315_2aff31d1-b6bd-4f6f-a572-d2b970009369.png?v=1793587743"}],"url":"https:\/\/fmcarbide.com\/collections\/solid-carbide-roughing-end-mills.oembed","provider":"FM Carbide","version":"1.0","type":"link"}