For indexable insert drills. Chipped inserts, loud cutting, long chips, chatter, or oversize holes? Tap the symptom to get the likely causes and what to do about each one.
Drill & Insert Damage
Chipping or Breakage
Likely cause
What to do
Poor chip evacuation due to insufficient coolant pressure and/or volume
Increase coolant flow
Deflection
Reduce overhang
Misalignment
Check concentricity; do not exceed ±.005" TIR
Speed too slow, feed too light
Increase speed and/or feed
Wrong chipbreaker geometry
Use stronger chipbreaker (3P)
Drill & Insert Damage
Inside Insert Corner Chips at Center
Likely cause
What to do
High cutting force at center of drill
Use tougher grade or uncoated grade in inside position
Drill & Insert Damage
Fracturing of the Drill
Likely cause
What to do
Improper seating of inserts
Check insert seating
Unstable spindle
Use rigid machine
Insufficient horsepower
Reduce feed or change machines
Excessive thrust force
Reduce feed
Drill & Insert Damage
Short Tool Life
Likely cause
What to do
Excessive insert wear
Lower cutting speed or change grade
Lack of rigidity
Check set-up and spindle
Improper coolant
Check type of coolant and mixture
Cutting Behavior & Hole Size
Loud, Rough Cutting
Likely cause
What to do
Excessive thrust force
Reduce feed, increase speed
Re-cutting chip
Increase coolant flow
Cutting Behavior & Hole Size
Long Unbroken Chips
Likely cause
What to do
Insufficient coolant pressure and volume
Increase coolant flow
Feed rate too light
Increase feed
Wrong chipbreaker geometry
Use a more positive geometry (1P)
Cutting Behavior & Hole Size
Chatter
Likely cause
What to do
Vibration
Check setup and part rigidity
Poor chip control
Increase coolant flow
Drill not properly seated in holder
Check set-up
Cutting Behavior & Hole Size
Hole Size Too Large
Likely cause
What to do
Drill misaligned
Correct misalignment
No problem in this chart matches that search. Try a shorter word, such as a symptom (chatter, wear) or a fix (coolant, feed). Or ask our team.
Drilling holes all day? Our team can help choose an indexable drill and insert grade for your material and machine.
Reference: FM Carbide indexable drilling application guidelines. Each problem can be linked directly. For example, add #chipping-breakage to the end of this page’s address.
Find tools for your application.
Browse related tools, then check the product specifications against your material, dimensions, and setup.