Find the tool by the operation, not the brand.
Turning, boring, milling, hole-making, threading and modular tooling. Every family below is ready to order. The brand is on the card, so you can pick by budget and lead time.
Turning
External turning: the holder, the insert, and the cartridge that carries it. Pick the brand by budget and lead time; the ISO insert seat is the same.

Turning Tool Holders
External holders by clamping system, insert shape and shank. Narrow it down in three clicks.

RMC Tool Holders
US-made turning tool holders by shank size and insert.

Cartridges
Cartridge units, right and left hand, by insert.

FM Carbide Inserts
Our own indexable line: turning, milling and drilling inserts in proven grades and chip breakers.

Turning Inserts
CNMG, TNMG, DNMG, WNMG and more: every turning insert we stock, in one place.

Canela Turning Inserts
ISO turning inserts by shape and grade, from roughing to finishing.

Ceramic Inserts
Ceramic inserts by shape and grade for high-speed turning.

CNMG Inserts
80° diamond with four cutting corners. The all-rounder for turning and facing.

DNMG Inserts
55° diamond with four cutting corners, for profiling and turning close to a shoulder.

TNMG Inserts
60° triangle with six cutting corners, for economical general turning and facing.

WNMG Inserts
80° trigon with six cutting corners: C-shape strength, more edges per insert.
Boring & internal turning
Bars by minimum bore and length, then by insert. Two brands, two price points.

Boring Bars
Steel and carbide-shank bars. Filter by minimum bore, then by insert.

RMC Boring Bars
Rigid, US-made boring bars in inch sizes for the RMC system.

RMC Interchangeable Heads
Swap the head, keep the bar. RMC's modular boring system.
Milling
Solid carbide end mills from HTC, indexable cutters and arbors from Canela, milling inserts from FM Carbide.

General Purpose
Square, ball nose, corner radius & long reach for steel, stainless and aluminum.

Hot Mills
4 & 5 flutes with AlTiN and Sky Coat for stainless, Inconel and titanium.

Turbo Mills: Roughers
HOG roughers: 5 flutes, 45° helix, chamfered edge.

Multi-Flute Mills
5 to 12 flutes for high-productivity finishing.

Spoon Cutters
High-helix finishers for a bright finish in aluminum.

Metric End Mills
Every 0.5 mm from 1 to 25 mm, 2 to 4 flutes.

Tapered End Mills
Tapered end mills for mold, die and draft-angle work.

Mini Mills
Small diameters for fine detail work.

Extra Long End Mills
Long reach for deep pockets and walls.

Chamfer Mills
Single-pass chamfering and deburring.

Carbide Rounds
Solid carbide round blanks.

HSS Flat Bottom End Mills
Flat-bottom HSS end mills.
Drilling, reaming & countersinking
Solid carbide from HTC for precision holes; indexable drills from Canela for bigger diameters and faster stock removal.

Drills
Jobber, screw machine, center, spade & drill mills.

Indexable Drills
Indexable-insert drills, including PSC-shank versions.

Reamers
Solid carbide reamers for exact hole size, inch sizes.

Countersinks
Single and multi-flute countersinks by angle.

Countersink Sets
Boxed sets by angle and flute count.

Center Laps
Center laps for center holes.
Threading, grooving & parting
Laydown threading, part-off blades, Top Notch and thread mills, plus the paste that keeps the tap alive.

Threading
Threading holders and inserts, external and internal.

Parting & Grooving
Blades, holders and inserts for parting and grooving.

Top Notch
Top Notch holders and inserts for grooving and threading.

Thread Mills
Solid carbide thread mills for helical thread milling.

Anchorlube
A water-based, semi-paste lubricant for drilling, tapping, reaming, and other metalworking operations.
PSC modular tooling
Polygon-coupled (ISO 26623) chain: machine adaptor → head or bar → adaptor for your cutter. Six sizes, PSC32 to PSC100.

PSC Machine Adaptors
The first link: turret, VDI and taper-side adaptors with the female polygon.

PSC Turning Heads & Bars
Cutting units with the male polygon, by PSC size and insert.

PSC Tool Adaptors
Collet chucks, end mill holders and reducers on a PSC shank.
Finishing, coolant & spare parts
The things a shop runs out of first.

Carbide Burrs
SA to SN shapes for deburring, shaping and weld cleanup.

Hirt-Line Coolant
Modular coolant hose systems from 1/8" to 3/4".

Spare Parts
Screws, clamps, shims and keys for Canela holders.

RMC Hardware
Screws, clamps and wrenches for RMC holders and bars.


