HTML sitemap for products

Products

• 25mm End Mill Standard Length. Single End Square. Shank OD 25mm Flute Length 38mm OAL 100mm - 4 Flutes - TiN Coat
• 24.5mm End Mill Standard Length. Single End Square. Shank OD 25mm Flute Length 38mm OAL 100mm - 4 Flutes - TiN Coat
• 24mm End Mill Standard Length. Single End Square. Shank OD 25mm Flute Length 38mm OAL 100mm - 4 Flutes - TiN Coat
• 23.5mm End Mill Standard Length. Single End Square. Shank OD 25mm Flute Length 38mm OAL 100mm - 4 Flutes - TiN Coat
• 23mm End Mill Standard Length. Single End Square. Shank OD 25mm Flute Length 38mm OAL 100mm - 4 Flutes - TiN Coat
• 22.5mm End Mill Standard Length. Single End Square. Shank OD 25mm Flute Length 38mm OAL 100mm - 4 Flutes - TiN Coat
• 22mm End Mill Standard Length. Single End Square. Shank OD 22mm Flute Length 38mm OAL 100mm - 4 Flutes - TiN Coat
• 21.5mm End Mill Standard Length. Single End Square. Shank OD 22mm Flute Length 38mm OAL 100mm - 4 Flutes - TiN Coat
• 21mm End Mill Standard Length. Single End Square. Shank OD 22mm Flute Length 38mm OAL 100mm - 4 Flutes - TiN Coat
• 20.5mm End Mill Standard Length. Single End Square. Shank OD 22mm Flute Length 38mm OAL 100mm - 4 Flutes - TiN Coat
• 20mm End Mill Standard Length. Single End Square. Shank OD 20mm Flute Length 38mm OAL 100mm - 4 Flutes - TiN Coat
• 19.5mm End Mill Standard Length. Single End Square. Shank OD 20mm Flute Length 38mm OAL 100mm - 4 Flutes - TiN Coat
• 19mm End Mill Standard Length. Single End Square. Shank OD 20mm Flute Length 38mm OAL 100mm - 4 Flutes - TiN Coat
• 18.5mm End Mill Standard Length. Single End Square. Shank OD 20mm Flute Length 38mm OAL 100mm - 4 Flutes - TiN Coat
• 18mm End Mill Standard Length. Single End Square. Shank OD 18mm Flute Length 36mm OAL 100mm - 4 Flutes - TiN Coat
• 17.5mm End Mill Standard Length. Single End Square. Shank OD 18mm Flute Length 36mm OAL 100mm - 4 Flutes - TiN Coat
• 17mm End Mill Standard Length. Single End Square. Shank OD 18mm Flute Length 36mm OAL 100mm - 4 Flutes - TiN Coat
• 16mm End Mill Standard Length. Single End Square. Shank OD 16mm Flute Length 32mm OAL 88mm - 4 Flutes - TiN Coat
• 15.5mm End Mill Standard Length. Single End Square. Shank OD 16mm Flute Length 32mm OAL 88mm - 4 Flutes - TiN Coat
• 15mm End Mill Standard Length. Single End Square. Shank OD 16mm Flute Length 32mm OAL 88mm - 4 Flutes - TiN Coat
• 14.5mm End Mill Standard Length. Single End Square. Shank OD 16mm Flute Length 32mm OAL 88mm - 4 Flutes - TiN Coat
• 14mm End Mill Standard Length. Single End Square. Shank OD 14mm Flute Length 30mm OAL 88mm - 4 Flutes - TiN Coat
• 13.5mm End Mill Standard Length. Single End Square. Shank OD 14mm Flute Length 30mm OAL 88mm - 4 Flutes - TiN Coat
• 13mm End Mill Standard Length. Single End Square. Shank OD 14mm Flute Length 30mm OAL 88mm - 4 Flutes - TiN Coat
• 12.5mm End Mill Standard Length. Single End Square. Shank OD 14mm Flute Length 30mm OAL 75mm - 4 Flutes - TiN Coat
• 12mm End Mill Standard Length. Single End Square. Shank OD 12mm Flute Length 25mm OAL 75mm - 4 Flutes - TiN Coat
• 11.5mm End Mill Standard Length. Single End Square. Shank OD 12mm Flute Length 25mm OAL 75mm - 4 Flutes - TiN Coat
• 11mm End Mill Standard Length. Single End Square. Shank OD 12mm Flute Length 25mm OAL 70mm - 4 Flutes - TiN Coat
• 10.5mm End Mill Standard Length. Single End Square. Shank OD 12mm Flute Length 25mm OAL 70mm - 4 Flutes - TiN Coat
• 10mm End Mill Standard Length. Single End Square. Shank OD 10mm Flute Length 22mm OAL 70mm - 4 Flutes - TiN Coat
• 9.5mm End Mill Standard Length. Single End Square. Shank OD 10mm Flute Length 22mm OAL 70mm - 4 Flutes - TiN Coat
• 9mm End Mill Standard Length. Single End Square. Shank OD 10mm Flute Length 22mm OAL 70mm - 4 Flutes - TiN Coat
• 8.5mm End Mill Standard Length. Single End Square. Shank OD 10mm Flute Length 22mm OAL 70mm - 4 Flutes - TiN Coat
• 8mm End Mill Standard Length. Single End Square. Shank OD 8mm Flute Length 19mm OAL 63mm - 4 Flutes - TiN Coat
• 7.5mm End Mill Standard Length. Single End Square. Shank OD 8mm Flute Length 19mm OAL 63mm - 4 Flutes - TiN Coat
• 7mm End Mill Standard Length. Single End Square. Shank OD 8mm Flute Length 19mm OAL 63mm - 4 Flutes - TiN Coat
• 6.5mm End Mill Standard Length. Single End Square. Shank OD 8mm Flute Length 19mm OAL 63mm - 4 Flutes - TiN Coat
• 6mm End Mill Standard Length. Single End Square. Shank OD 6mm Flute Length 19mm OAL 63mm - 4 Flutes - TiN Coat
• 5.5mm End Mill Standard Length. Single End Square. Shank OD 6mm Flute Length 19mm OAL 63mm - 4 Flutes - TiN Coat
• 5mm End Mill Standard Length. Single End Square. Shank OD 6mm Flute Length 16mm OAL 50mm - 4 Flutes - TiN Coat
• 4.5mm End Mill Standard Length. Single End Square. Shank OD 6mm Flute Length 14mm OAL 50mm - 4 Flutes - TiN Coat
• 4mm End Mill Standard Length. Single End Square. Shank OD 4mm Flute Length 14mm OAL 50mm - 4 Flutes - TiN Coat
• 3.5mm End Mill Standard Length. Single End Square. Shank OD 4mm Flute Length 12mm OAL 50mm - 4 Flutes - TiN Coat
• 3mm End Mill Standard Length. Single End Square. Shank OD 3mm Flute Length 12mm OAL 38mm - 4 Flutes - TiN Coat
• 2.5mm End Mill Standard Length. Single End Square. Shank OD 3mm Flute Length 7mm OAL 38mm - 4 Flutes - TiN Coat
• 2mm End Mill Standard Length. Single End Square. Shank OD 3mm Flute Length 6mm OAL 38mm - 4 Flutes - TiN Coat
• 1.5mm End Mill Standard Length. Single End Square. Shank OD 3mm Flute Length 5mm OAL 38mm - 4 Flutes - TiN Coat
• 1mm End Mill Standard Length. Single End Square. Shank OD 3mm Flute Length 3mm OAL 38mm - 4 Flutes - TiN Coat
• 25mm End Mill Standard Length. Single End Square. Shank OD 25mm Flute Length 38mm OAL 100mm - 3 Flutes - TiN Coat
• 24.5mm End Mill Standard Length. Single End Square. Shank OD 25mm Flute Length 38mm OAL 100mm - 3 Flutes - TiN Coat
• 24mm End Mill Standard Length. Single End Square. Shank OD 25mm Flute Length 38mm OAL 100mm - 3 Flutes - TiN Coat
• 23.5mm End Mill Standard Length. Single End Square. Shank OD 25mm Flute Length 38mm OAL 100mm - 3 Flutes - TiN Coat
• 23mm End Mill Standard Length. Single End Square. Shank OD 25mm Flute Length 38mm OAL 100mm - 3 Flutes - TiN Coat
• 22.5mm End Mill Standard Length. Single End Square. Shank OD 25mm Flute Length 38mm OAL 100mm - 3 Flutes - TiN Coat
• 22mm End Mill Standard Length. Single End Square. Shank OD 22mm Flute Length 38mm OAL 100mm - 3 Flutes - TiN Coat
• 21.5mm End Mill Standard Length. Single End Square. Shank OD 22mm Flute Length 38mm OAL 100mm - 3 Flutes - TiN Coat
• 21mm End Mill Standard Length. Single End Square. Shank OD 22mm Flute Length 38mm OAL 100mm - 3 Flutes - TiN Coat
• 20.5mm End Mill Standard Length. Single End Square. Shank OD 22mm Flute Length 38mm OAL 100mm - 3 Flutes - TiN Coat
• 20mm End Mill Standard Length. Single End Square. Shank OD 20mm Flute Length 38mm OAL 100mm - 3 Flutes - TiN Coat
• 19.5mm End Mill Standard Length. Single End Square. Shank OD 20mm Flute Length 38mm OAL 100mm - 3 Flutes - TiN Coat
• 19mm End Mill Standard Length. Single End Square. Shank OD 20mm Flute Length 38mm OAL 100mm - 3 Flutes - TiN Coat
• 18.5mm End Mill Standard Length. Single End Square. Shank OD 20mm Flute Length 38mm OAL 100mm - 3 Flutes - TiN Coat
• 18mm End Mill Standard Length. Single End Square. Shank OD 18mm Flute Length 36mm OAL 100mm - 3 Flutes - TiN Coat
• 17.5mm End Mill Standard Length. Single End Square. Shank OD 18mm Flute Length 36mm OAL 100mm - 3 Flutes - TiN Coat
• 17mm End Mill Standard Length. Single End Square. Shank OD 18mm Flute Length 36mm OAL 100mm - 3 Flutes - TiN Coat
• 16.5mm End Mill Standard Length. Single End Square. Shank OD 18mm Flute Length 36mm OAL 100mm - 3 Flutes - TiN Coat
• 16mm End Mill Standard Length. Single End Square. Shank OD 16mm Flute Length 32mm OAL 88mm - 3 Flutes - TiN Coat
• 15.5mm End Mill Standard Length. Single End Square. Shank OD 16mm Flute Length 32mm OAL 88mm - 3 Flutes - TiN Coat
• 15mm End Mill Standard Length. Single End Square. Shank OD 16mm Flute Length 32mm OAL 88mm - 3 Flutes - TiN Coat
• 14.5mm End Mill Standard Length. Single End Square. Shank OD 16mm Flute Length 32mm OAL 88mm - 3 Flutes - TiN Coat
• 14mm End Mill Standard Length. Single End Square. Shank OD 14mm Flute Length 30mm OAL 88mm - 3 Flutes - TiN Coat
• 13.5mm End Mill Standard Length. Single End Square. Shank OD 14mm Flute Length 30mm OAL 88mm - 3 Flutes - TiN Coat
• 13mm End Mill Standard Length. Single End Square. Shank OD 14mm Flute Length 30mm OAL 88mm - 3 Flutes - TiN Coat
• 12.5mm End Mill Standard Length. Single End Square. Shank OD 14mm Flute Length 30mm OAL 75mm - 3 Flutes - TiN Coat
• 12mm End Mill Standard Length. Single End Square. Shank OD 12mm Flute Length 25mm OAL 75mm - 3 Flutes - TiN Coat
• 11.5mm End Mill Standard Length. Single End Square. Shank OD 12mm Flute Length 25mm OAL 75mm - 3 Flutes - TiN Coat
• 11mm End Mill Standard Length. Single End Square. Shank OD 12mm Flute Length 25mm OAL 70mm - 3 Flutes - TiN Coat
• 10.5mm End Mill Standard Length. Single End Square. Shank OD 12mm Flute Length 25mm OAL 70mm - 3 Flutes - TiN Coat
• 10mm End Mill Standard Length. Single End Square. Shank OD 10mm Flute Length 22mm OAL 70mm - 3 Flutes - TiN Coat
• 9.5mm End Mill Standard Length. Single End Square. Shank OD 10mm Flute Length 22mm OAL 70mm - 3 Flutes - TiN Coat
• 9mm End Mill Standard Length. Single End Square. Shank OD 10mm Flute Length 22mm OAL 70mm - 3 Flutes - TiN Coat
• 8.5mm End Mill Standard Length. Single End Square. Shank OD 10mm Flute Length 22mm OAL 70mm - 3 Flutes - TiN Coat
• 8mm End Mill Standard Length. Single End Square. Shank OD 8mm Flute Length 19mm OAL 63mm - 3 Flutes - TiN Coat
• 7.5mm End Mill Standard Length. Single End Square. Shank OD 8mm Flute Length 19mm OAL 63mm - 3 Flutes - TiN Coat
• 7mm End Mill Standard Length. Single End Square. Shank OD 8mm Flute Length 19mm OAL 63mm - 3 Flutes - TiN Coat
• 6.5mm End Mill Standard Length. Single End Square. Shank OD 8mm Flute Length 19mm OAL 63mm - 3 Flutes - TiN Coat
• 6mm End Mill Standard Length. Single End Square. Shank OD 6mm Flute Length 19mm OAL 63mm - 3 Flutes - TiN Coat
• 5.5mm End Mill Standard Length. Single End Square. Shank OD 6mm Flute Length 19mm OAL 63mm - 3 Flutes - TiN Coat
• 5mm End Mill Standard Length. Single End Square. Shank OD 6mm Flute Length 16mm OAL 50mm - 3 Flutes - TiN Coat
• 4.5mm End Mill Standard Length. Single End Square. Shank OD 6mm Flute Length 14mm OAL 50mm - 3 Flutes - TiN Coat
• 4mm End Mill Standard Length. Single End Square. Shank OD 4mm Flute Length 14mm OAL 50mm - 3 Flutes - TiN Coat
• 3.5mm End Mill Standard Length. Single End Square. Shank OD 4mm Flute Length 12mm OAL 50mm - 3 Flutes - TiN Coat
• 3mm End Mill Standard Length. Single End Square. Shank OD 3mm Flute Length 12mm OAL 38mm - 3 Flutes - TiN Coat
• 2.5mm End Mill Standard Length. Single End Square. Shank OD 3mm Flute Length 7mm OAL 38mm - 3 Flutes - TiN Coat
• 2mm End Mill Standard Length. Single End Square. Shank OD 3mm Flute Length 6mm OAL 38mm - 3 Flutes - TiN Coat
• 1.5mm End Mill Standard Length. Single End Square. Shank OD 3mm Flute Length 5mm OAL 38mm - 3 Flutes - TiN Coat
• 1mm End Mill Standard Length. Single End Square. Shank OD 3mm Flute Length 3mm OAL 38mm - 3 Flutes - TiN Coat
• 25mm End Mill Standard Length. Single End Square. Shank OD 25mm Flute Length 38mm OAL 100mm - 2 Flutes - TiN Coat
• 24.5mm End Mill Standard Length. Single End Square. Shank OD 25mm Flute Length 38mm OAL 100mm - 2 Flutes - TiN Coat
• 24mm End Mill Standard Length. Single End Square. Shank OD 25mm Flute Length 38mm OAL 100mm - 2 Flutes - TiN Coat
• 23.5mm End Mill Standard Length. Single End Square. Shank OD 25mm Flute Length 38mm OAL 100mm - 2 Flutes - TiN Coat
• 23mm End Mill Standard Length. Single End Square. Shank OD 25mm Flute Length 38mm OAL 100mm - 2 Flutes - TiN Coat
• 22.5mm End Mill Standard Length. Single End Square. Shank OD 25mm Flute Length 38mm OAL 100mm - 2 Flutes - TiN Coat
• 22mm End Mill Standard Length. Single End Square. Shank OD 22mm Flute Length 38mm OAL 100mm - 2 Flutes - TiN Coat
• 21.5mm End Mill Standard Length. Single End Square. Shank OD 22mm Flute Length 38mm OAL 100mm - 2 Flutes - TiN Coat
• 21mm End Mill Standard Length. Single End Square. Shank OD 22mm Flute Length 38mm OAL 100mm - 2 Flutes - TiN Coat
• 20.5mm End Mill Standard Length. Single End Square. Shank OD 22mm Flute Length 38mm OAL 100mm - 2 Flutes - TiN Coat
• 20mm End Mill Standard Length. Single End Square. Shank OD 20mm Flute Length 38mm OAL 100mm - 2 Flutes - TiN Coat
• 19.5mm End Mill Standard Length. Single End Square. Shank OD 20mm Flute Length 38mm OAL 100mm - 2 Flutes - TiN Coat
• 19mm End Mill Standard Length. Single End Square. Shank OD 20mm Flute Length 38mm OAL 100mm - 2 Flutes - TiN Coat
• 18.5mm End Mill Standard Length. Single End Square. Shank OD 20mm Flute Length 38mm OAL 100mm - 2 Flutes - TiN Coat
• 18mm End Mill Standard Length. Single End Square. Shank OD 18mm Flute Length 36mm OAL 100mm - 2 Flutes - TiN Coat
• 17.5mm End Mill Standard Length. Single End Square. Shank OD 18mm Flute Length 36mm OAL 100mm - 2 Flutes - TiN Coat
• 17mm End Mill Standard Length. Single End Square. Shank OD 18mm Flute Length 36mm OAL 100mm - 2 Flutes - TiN Coat
• 16.5mm End Mill Standard Length. Single End Square. Shank OD 18mm Flute Length 36mm OAL 100mm - 2 Flutes - TiN Coat
• 16mm End Mill Standard Length. Single End Square. Shank OD 16mm Flute Length 32mm OAL 88mm - 2 Flutes - TiN Coat
• 15.5mm End Mill Standard Length. Single End Square. Shank OD 16mm Flute Length 32mm OAL 88mm - 2 Flutes - TiN Coat
• 15mm End Mill Standard Length. Single End Square. Shank OD 16mm Flute Length 32mm OAL 88mm - 2 Flutes - TiN Coat
• 14.5mm End Mill Standard Length. Single End Square. Shank OD 16mm Flute Length 32mm OAL 88mm - 2 Flutes - TiN Coat
• 14mm End Mill Standard Length. Single End Square. Shank OD 14mm Flute Length 30mm OAL 88mm - 2 Flutes - TiN Coat
• 13.5mm End Mill Standard Length. Single End Square. Shank OD 14mm Flute Length 30mm OAL 88mm - 2 Flutes - TiN Coat
• 13mm End Mill Standard Length. Single End Square. Shank OD 14mm Flute Length 30mm OAL 88mm - 2 Flutes - TiN Coat
• 12.5mm End Mill Standard Length. Single End Square. Shank OD 14mm Flute Length 30mm OAL 75mm - 2 Flutes - TiN Coat
• 12mm End Mill Standard Length. Single End Square. Shank OD 12mm Flute Length 25mm OAL 75mm - 2 Flutes - TiN Coat
• 11.5mm End Mill Standard Length. Single End Square. Shank OD 12mm Flute Length 25mm OAL 75mm - 2 Flutes - TiN Coat
• 11mm End Mill Standard Length. Single End Square. Shank OD 12mm Flute Length 25mm OAL 70mm - 2 Flutes - TiN Coat
• 10.5mm End Mill Standard Length. Single End Square. Shank OD 12mm Flute Length 25mm OAL 70mm - 2 Flutes - TiN Coat
• 10mm End Mill Standard Length. Single End Square. Shank OD 10mm Flute Length 22mm OAL 70mm - 2 Flutes - TiN Coat
• 9.5mm End Mill Standard Length. Single End Square. Shank OD 10mm Flute Length 22mm OAL 70mm - 2 Flutes - TiN Coat
• 9mm End Mill Standard Length. Single End Square. Shank OD 10mm Flute Length 22mm OAL 70mm - 2 Flutes - TiN Coat
• 8.5mm End Mill Standard Length. Single End Square. Shank OD 10mm Flute Length 22mm OAL 70mm - 2 Flutes - TiN Coat
• 8mm End Mill Standard Length. Single End Square. Shank OD 8mm Flute Length 19mm OAL 63mm - 2 Flutes - TiN Coat
• 7.5mm End Mill Standard Length. Single End Square. Shank OD 8mm Flute Length 19mm OAL 63mm - 2 Flutes - TiN Coat
• 7mm End Mill Standard Length. Single End Square. Shank OD 8mm Flute Length 19mm OAL 63mm - 2 Flutes - TiN Coat
• 6.5mm End Mill Standard Length. Single End Square. Shank OD 8mm Flute Length 19mm OAL 63mm - 2 Flutes - TiN Coat
• 6mm End Mill Standard Length. Single End Square. Shank OD 6mm Flute Length 19mm OAL 63mm - 2 Flutes - TiN Coat
• 5.5mm End Mill Standard Length. Single End Square. Shank OD 6mm Flute Length 19mm OAL 63mm - 2 Flutes - TiN Coat
• 5mm End Mill Standard Length. Single End Square. Shank OD 6mm Flute Length 16mm OAL 50mm - 2 Flutes - TiN Coat
• 4.5mm End Mill Standard Length. Single End Square. Shank OD 6mm Flute Length 14mm OAL 50mm - 2 Flutes - TiN Coat
• 4mm End Mill Standard Length. Single End Square. Shank OD 4mm Flute Length 14mm OAL 50mm - 2 Flutes - TiN Coat
• 3.5mm End Mill Standard Length. Single End Square. Shank OD 4mm Flute Length 12mm OAL 50mm - 2 Flutes - TiN Coat
• 3mm End Mill Standard Length. Single End Square. Shank OD 3mm Flute Length 12mm OAL 38mm - 2 Flutes - TiN Coat
• 2.5mm End Mill Standard Length. Single End Square. Shank OD 3mm Flute Length 7mm OAL 38mm - 2 Flutes - TiN Coat
• 2mm End Mill Standard Length. Single End Square. Shank OD 3mm Flute Length 6mm OAL 38mm - 2 Flutes - TiN Coat
• 1.5mm End Mill Standard Length. Single End Square. Shank OD 3mm Flute Length 5mm OAL 38mm - 2 Flutes - TiN Coat
• 1mm End Mill Standard Length. Single End Square. Shank OD 3mm Flute Length 3mm OAL 38mm - 2 Flutes - TiN Coat
• 25mm End Mill Standard Length. Single End Square. Shank OD 25mm Flute Length 38mm OAL 100mm - 4 Flutes - Uncoated
• 24.5mm End Mill Standard Length. Single End Square. Shank OD 25mm Flute Length 38mm OAL 100mm - 4 Flutes - Uncoated
• 24mm End Mill Standard Length. Single End Square. Shank OD 25mm Flute Length 38mm OAL 100mm - 4 Flutes - Uncoated
• 23.5mm End Mill Standard Length. Single End Square. Shank OD 25mm Flute Length 38mm OAL 100mm - 4 Flutes - Uncoated
• 23mm End Mill Standard Length. Single End Square. Shank OD 25mm Flute Length 38mm OAL 100mm - 4 Flutes - Uncoated
• 22.5mm End Mill Standard Length. Single End Square. Shank OD 25mm Flute Length 38mm OAL 100mm - 4 Flutes - Uncoated
• 22mm End Mill Standard Length. Single End Square. Shank OD 22mm Flute Length 38mm OAL 100mm - 4 Flutes - Uncoated
• 21.5mm End Mill Standard Length. Single End Square. Shank OD 22mm Flute Length 38mm OAL 100mm - 4 Flutes - Uncoated
• 21mm End Mill Standard Length. Single End Square. Shank OD 22mm Flute Length 38mm OAL 100mm - 4 Flutes - Uncoated
• 20.5mm End Mill Standard Length. Single End Square. Shank OD 22mm Flute Length 38mm OAL 100mm - 4 Flutes - Uncoated
• 20mm End Mill Standard Length. Single End Square. Shank OD 20mm Flute Length 38mm OAL 100mm - 4 Flutes - Uncoated
• 19.5mm End Mill Standard Length. Single End Square. Shank OD 20mm Flute Length 38mm OAL 100mm - 4 Flutes - Uncoated
• 19mm End Mill Standard Length. Single End Square. Shank OD 20mm Flute Length 38mm OAL 100mm - 4 Flutes - Uncoated
• 18.5mm End Mill Standard Length. Single End Square. Shank OD 20mm Flute Length 38mm OAL 100mm - 4 Flutes - Uncoated
• 18mm End Mill Standard Length. Single End Square. Shank OD 18mm Flute Length 36mm OAL 100mm - 4 Flutes - Uncoated
• 17.5mm End Mill Standard Length. Single End Square. Shank OD 18mm Flute Length 36mm OAL 100mm - 4 Flutes - Uncoated
• 17mm End Mill Standard Length. Single End Square. Shank OD 18mm Flute Length 36mm OAL 100mm - 4 Flutes - Uncoated
• 16.5mm End Mill Standard Length. Single End Square. Shank OD 18mm Flute Length 36mm OAL 100mm - 4 Flutes - Uncoated
• 16mm End Mill Standard Length. Single End Square. Shank OD 16mm Flute Length 32mm OAL 88mm - 4 Flutes - Uncoated
• 15.5mm End Mill Standard Length. Single End Square. Shank OD 16mm Flute Length 32mm OAL 88mm - 4 Flutes - Uncoated
• 15mm End Mill Standard Length. Single End Square. Shank OD 16mm Flute Length 32mm OAL 88mm - 4 Flutes - Uncoated
• 14.5mm End Mill Standard Length. Single End Square. Shank OD 16mm Flute Length 32mm OAL 88mm - 4 Flutes - Uncoated
• 14mm End Mill Standard Length. Single End Square. Shank OD 14mm Flute Length 30mm OAL 88mm - 4 Flutes - Uncoated
• 13.5mm End Mill Standard Length. Single End Square. Shank OD 14mm Flute Length 30mm OAL 88mm - 4 Flutes - Uncoated
• 13mm End Mill Standard Length. Single End Square. Shank OD 14mm Flute Length 30mm OAL 88mm - 4 Flutes - Uncoated
• 12.5mm End Mill Standard Length. Single End Square. Shank OD 14mm Flute Length 30mm OAL 88mm - 4 Flutes - Uncoated
• 12mm End Mill Standard Length. Single End Square. Shank OD 12mm Flute Length 25mm OAL 75mm - 4 Flutes - Uncoated
• 11.5mm End Mill Standard Length. Single End Square. Shank OD 12mm Flute Length 25mm OAL 75mm - 4 Flutes - Uncoated
• 11mm End Mill Standard Length. Single End Square. Shank OD 12mm Flute Length 25mm OAL 70mm - 4 Flutes - Uncoated
• 10.5mm End Mill Standard Length. Single End Square. Shank OD 12mm Flute Length 25mm OAL 70mm - 4 Flutes - Uncoated
• 10mm End Mill Standard Length. Single End Square. Shank OD 10mm Flute Length 22mm OAL 70mm - 4 Flutes - Uncoated
• 9.5mm End Mill Standard Length. Single End Square. Shank OD 10mm Flute Length 22mm OAL 70mm - 4 Flutes - Uncoated
• 9mm End Mill Standard Length. Single End Square. Shank OD 10mm Flute Length 22mm OAL 70mm - 4 Flutes - Uncoated
• 8.5mm End Mill Standard Length. Single End Square. Shank OD 10mm Flute Length 22mm OAL 70mm - 4 Flutes - Uncoated
• 8mm End Mill Standard Length. Single End Square. Shank OD 8mm Flute Length 19mm OAL 63mm - 4 Flutes - Uncoated
• 7.5mm End Mill Standard Length. Single End Square. Shank OD 8mm Flute Length 19mm OAL 63mm - 4 Flutes - Uncoated
• 7mm End Mill Standard Length. Single End Square. Shank OD 8mm Flute Length 19mm OAL 63mm - 4 Flutes - Uncoated
• 6.5mm End Mill Standard Length. Single End Square. Shank OD 8mm Flute Length 19mm OAL 63mm - 4 Flutes - Uncoated
• 6mm End Mill Standard Length. Single End Square. Shank OD 6mm Flute Length 19mm OAL 63mm - 4 Flutes - Uncoated
• 5.5mm End Mill Standard Length. Single End Square. Shank OD 6mm Flute Length 19mm OAL 63mm - 4 Flutes - Uncoated
• 5mm End Mill Standard Length. Single End Square. Shank OD 6mm Flute Length 16mm OAL 50mm - 4 Flutes - Uncoated
• 4.5mm End Mill Standard Length. Single End Square. Shank OD 6mm Flute Length 14mm OAL 50mm - 4 Flutes - Uncoated
• 4mm End Mill Standard Length. Single End Square. Shank OD 4mm Flute Length 14mm OAL 50mm - 4 Flutes - Uncoated
• 3.5mm End Mill Standard Length. Single End Square. Shank OD 4mm Flute Length 12mm OAL 50mm - 4 Flutes - Uncoated
• 3mm End Mill Standard Length. Single End Square. Shank OD 3mm Flute Length 12mm OAL 38mm - 4 Flutes - Uncoated
• 2.5mm End Mill Standard Length. Single End Square. Shank OD 3mm Flute Length 7mm OAL 38mm - 4 Flutes - Uncoated
• 2mm End Mill Standard Length. Single End Square. Shank OD 3mm Flute Length 6mm OAL 38mm - 4 Flutes - Uncoated
• 1.5mm End Mill Standard Length. Single End Square. Shank OD 3mm Flute Length 5mm OAL 38mm - 4 Flutes - Uncoated
• 1mm End Mill Standard Length. Single End Square. Shank OD 3mm Flute Length 3mm OAL 38mm - 4 Flutes - Uncoated
• 25mm End Mill Standard Length. Single End Square. Shank OD 25mm Flute Length 38mm OAL 100mm - 3 Flutes - Uncoated
• 24.5mm End Mill Standard Length. Single End Square. Shank OD 25mm Flute Length 38mm OAL 100mm - 3 Flutes - Uncoated
• 24mm End Mill Standard Length. Single End Square. Shank OD 25mm Flute Length 38mm OAL 100mm - 3 Flutes - Uncoated
• 23.5mm End Mill Standard Length. Single End Square. Shank OD 25mm Flute Length 38mm OAL 100mm - 3 Flutes - Uncoated
• 23mm End Mill Standard Length. Single End Square. Shank OD 25mm Flute Length 38mm OAL 100mm - 3 Flutes - Uncoated
• 22.5mm End Mill Standard Length. Single End Square. Shank OD 25mm Flute Length 38mm OAL 100mm - 3 Flutes - Uncoated
• 22mm End Mill Standard Length. Single End Square. Shank OD 22mm Flute Length 38mm OAL 100mm - 3 Flutes - Uncoated
• 21.5mm End Mill Standard Length. Single End Square. Shank OD 22mm Flute Length 38mm OAL 100mm - 3 Flutes - Uncoated
• 21mm End Mill Standard Length. Single End Square. Shank OD 22mm Flute Length 38mm OAL 100mm - 3 Flutes - Uncoated
• 20.5mm End Mill Standard Length. Single End Square. Shank OD 22mm Flute Length 38mm OAL 100mm - 3 Flutes - Uncoated
• 20mm End Mill Standard Length. Single End Square. Shank OD 20mm Flute Length 38mm OAL 100mm - 3 Flutes - Uncoated
• 19.5mm End Mill Standard Length. Single End Square. Shank OD 20mm Flute Length 38mm OAL 100mm - 3 Flutes - Uncoated
• 19mm End Mill Standard Length. Single End Square. Shank OD 20mm Flute Length 38mm OAL 100mm - 3 Flutes - Uncoated
• 18.5mm End Mill Standard Length. Single End Square. Shank OD 20mm Flute Length 38mm OAL 100mm - 3 Flutes - Uncoated
• 18mm End Mill Standard Length. Single End Square. Shank OD 18mm Flute Length 36mm OAL 100mm - 3 Flutes - Uncoated
• 17.5mm End Mill Standard Length. Single End Square. Shank OD 18mm Flute Length 36mm OAL 100mm - 3 Flutes - Uncoated
• 17mm End Mill Standard Length. Single End Square. Shank OD 18mm Flute Length 36mm OAL 100mm - 3 Flutes - Uncoated
• 16.5mm End Mill Standard Length. Single End Square. Shank OD 18mm Flute Length 36mm OAL 100mm - 3 Flutes - Uncoated
• 16mm End Mill Standard Length. Single End Square. Shank OD 16mm Flute Length 32mm OAL 88mm - 3 Flutes - Uncoated
• 15.5mm End Mill Standard Length. Single End Square. Shank OD 16mm Flute Length 32mm OAL 88mm - 3 Flutes - Uncoated
• 15mm End Mill Standard Length. Single End Square. Shank OD 16mm Flute Length 32mm OAL 88mm - 3 Flutes - Uncoated
• 14.5mm End Mill Standard Length. Single End Square. Shank OD 16mm Flute Length 32mm OAL 88mm - 3 Flutes - Uncoated
• 14mm End Mill Standard Length. Single End Square. Shank OD 14mm Flute Length 30mm OAL 88mm - 3 Flutes - Uncoated
• 13.5mm End Mill Standard Length. Single End Square. Shank OD 14mm Flute Length 30mm OAL 88mm - 3 Flutes - Uncoated
• 13mm End Mill Standard Length. Single End Square. Shank OD 14mm Flute Length 30mm OAL 88mm - 3 Flutes - Uncoated
• 12.5mm End Mill Standard Length. Single End Square. Shank OD 14mm Flute Length 30mm OAL 88mm - 3 Flutes - Uncoated
• 12mm End Mill Standard Length. Single End Square. Shank OD 12mm Flute Length 25mm OAL 75mm - 3 Flutes - Uncoated
• 11.5mm End Mill Standard Length. Single End Square. Shank OD 12mm Flute Length 25mm OAL 75mm - 3 Flutes - Uncoated
• 11mm End Mill Standard Length. Single End Square. Shank OD 12mm Flute Length 25mm OAL 70mm - 3 Flutes - Uncoated
• 10.5mm End Mill Standard Length. Single End Square. Shank OD 12mm Flute Length 25mm OAL 70mm - 3 Flutes - Uncoated
• 10mm End Mill Standard Length. Single End Square. Shank OD 10mm Flute Length 22mm OAL 70mm - 3 Flutes - Uncoated
• 9.5mm End Mill Standard Length. Single End Square. Shank OD 10mm Flute Length 22mm OAL 70mm - 3 Flutes - Uncoated
• 9mm End Mill Standard Length. Single End Square. Shank OD 10mm Flute Length 22mm OAL 70mm - 3 Flutes - Uncoated
• 8.5mm End Mill Standard Length. Single End Square. Shank OD 10mm Flute Length 22mm OAL 70mm - 3 Flutes - Uncoated
• 8mm End Mill Standard Length. Single End Square. Shank OD 8mm Flute Length 19mm OAL 63mm - 3 Flutes - Uncoated
• 7.5mm End Mill Standard Length. Single End Square. Shank OD 8mm Flute Length 19mm OAL 63mm - 3 Flutes - Uncoated
• 7mm End Mill Standard Length. Single End Square. Shank OD 8mm Flute Length 19mm OAL 63mm - 3 Flutes - Uncoated
• 6.5mm End Mill Standard Length. Single End Square. Shank OD 8mm Flute Length 19mm OAL 63mm - 3 Flutes - Uncoated
• 6mm End Mill Standard Length. Single End Square. Shank OD 6mm Flute Length 19mm OAL 63mm - 3 Flutes - Uncoated
• 5.5mm End Mill Standard Length. Single End Square. Shank OD 6mm Flute Length 19mm OAL 63mm - 3 Flutes - Uncoated
• 5mm End Mill Standard Length. Single End Square. Shank OD 6mm Flute Length 16mm OAL 50mm - 3 Flutes - Uncoated
• 4.5mm End Mill Standard Length. Single End Square. Shank OD 6mm Flute Length 14mm OAL 50mm - 3 Flutes - Uncoated
• 4mm End Mill Standard Length. Single End Square. Shank OD 4mm Flute Length 14mm OAL 50mm - 3 Flutes - Uncoated
• 3.5mm End Mill Standard Length. Single End Square. Shank OD 4mm Flute Length 12mm OAL 50mm - 3 Flutes - Uncoated
• 3mm End Mill Standard Length. Single End Square. Shank OD 3mm Flute Length 12mm OAL 38mm - 3 Flutes - Uncoated
• 2.5mm End Mill Standard Length. Single End Square. Shank OD 3mm Flute Length 7mm OAL 38mm - 3 Flutes - Uncoated
• 2mm End Mill Standard Length. Single End Square. Shank OD 3mm Flute Length 6mm OAL 38mm - 3 Flutes - Uncoated
• 1.5mm End Mill Standard Length. Single End Square. Shank OD 3mm Flute Length 5mm OAL 38mm - 3 Flutes - Uncoated
• 1mm End Mill Standard Length. Single End Square. Shank OD 3mm Flute Length 3mm OAL 38mm - 3 Flutes - Uncoated
• 25mm End Mill Standard Length. Single End Square. Shank OD 25mm Flute Length 38mm OAL 100mm - 2 Flutes - Uncoated
• 24.5mm End Mill Standard Length. Single End Square. Shank OD 25mm Flute Length 38mm OAL 100mm - 2 Flutes - Uncoated
• 24mm End Mill Standard Length. Single End Square. Shank OD 25mm Flute Length 38mm OAL 100mm - 2 Flutes - Uncoated
• 23.5mm End Mill Standard Length. Single End Square. Shank OD 25mm Flute Length 38mm OAL 100mm - 2 Flutes - Uncoated
• 23mm End Mill Standard Length. Single End Square. Shank OD 25mm Flute Length 38mm OAL 100mm - 2 Flutes - Uncoated
• 22.5mm End Mill Standard Length. Single End Square. Shank OD 25mm Flute Length 38mm OAL 100mm - 2 Flutes - Uncoated
• 22mm End Mill Standard Length. Single End Square. Shank OD 22mm Flute Length 38mm OAL 100mm - 2 Flutes - Uncoated
• 21.5mm End Mill Standard Length. Single End Square. Shank OD 22mm Flute Length 38mm OAL 100mm - 2 Flutes - Uncoated
• 21mm End Mill Standard Length. Single End Square. Shank OD 22mm Flute Length 38mm OAL 100mm - 2 Flutes - Uncoated
• 20.5mm End Mill Standard Length. Single End Square. Shank OD 22mm Flute Length 38mm OAL 100mm - 2 Flutes - Uncoated
• 20mm End Mill Standard Length. Single End Square. Shank OD 20mm Flute Length 38mm OAL 100mm - 2 Flutes - Uncoated
• 19.5mm End Mill Standard Length. Single End Square. Shank OD 20mm Flute Length 38mm OAL 100mm - 2 Flutes - Uncoated
• 19mm End Mill Standard Length. Single End Square. Shank OD 20mm Flute Length 38mm OAL 100mm - 2 Flutes - Uncoated
• 18.5mm End Mill Standard Length. Single End Square. Shank OD 20mm Flute Length 38mm OAL 100mm - 2 Flutes - Uncoated
• 18mm End Mill Standard Length. Single End Square. Shank OD 18mm Flute Length 36mm OAL 100mm - 2 Flutes - Uncoated
• 17.5mm End Mill Standard Length. Single End Square. Shank OD 18mm Flute Length 36mm OAL 100mm - 2 Flutes - Uncoated
• 17mm End Mill Standard Length. Single End Square. Shank OD 18mm Flute Length 36mm OAL 100mm - 2 Flutes - Uncoated
• 16.5mm End Mill Standard Length. Single End Square. Shank OD 18mm Flute Length 36mm OAL 100mm - 2 Flutes - Uncoated
• 16mm End Mill Standard Length. Single End Square. Shank OD 16mm Flute Length 32mm OAL 88mm - 2 Flutes - Uncoated
• 15.5mm End Mill Standard Length. Single End Square. Shank OD 16mm Flute Length 32mm OAL 88mm - 2 Flutes - Uncoated
• 15mm End Mill Standard Length. Single End Square. Shank OD 16mm Flute Length 32mm OAL 88mm - 2 Flutes - Uncoated
• 14.5mm End Mill Standard Length. Single End Square. Shank OD 16mm Flute Length 32mm OAL 88mm - 2 Flutes - Uncoated
• 14mm End Mill Standard Length. Single End Square. Shank OD 14mm Flute Length 30mm OAL 88mm - 2 Flutes - Uncoated
• 13.5mm End Mill Standard Length. Single End Square. Shank OD 14mm Flute Length 30mm OAL 88mm - 2 Flutes - Uncoated
• 13mm End Mill Standard Length. Single End Square. Shank OD 14mm Flute Length 30mm OAL 88mm - 2 Flutes - Uncoated
• 12.5mm End Mill Standard Length. Single End Square. Shank OD 14mm Flute Length 30mm OAL 88mm - 2 Flutes - Uncoated
• 12mm End Mill Standard Length. Single End Square. Shank OD 12mm Flute Length 25mm OAL 75mm - 2 Flutes - Uncoated
• 11.5mm End Mill Standard Length. Single End Square. Shank OD 12mm Flute Length 25mm OAL 75mm - 2 Flutes - Uncoated
• 11mm End Mill Standard Length. Single End Square. Shank OD 12mm Flute Length 25mm OAL 70mm - 2 Flutes - Uncoated
• 10.5mm End Mill Standard Length. Single End Square. Shank OD 12mm Flute Length 25mm OAL 70mm - 2 Flutes - Uncoated
• 10mm End Mill Standard Length. Single End Square. Shank OD 10mm Flute Length 22mm OAL 70mm - 2 Flutes - Uncoated
• 9.5mm End Mill Standard Length. Single End Square. Shank OD 10mm Flute Length 22mm OAL 70mm - 2 Flutes - Uncoated
• 9mm End Mill Standard Length. Single End Square. Shank OD 10mm Flute Length 22mm OAL 70mm - 2 Flutes - Uncoated
• 8.5mm End Mill Standard Length. Single End Square. Shank OD 10mm Flute Length 22mm OAL 70mm - 2 Flutes - Uncoated
• 8mm End Mill Standard Length. Single End Square. Shank OD 8mm Flute Length 19mm OAL 63mm - 2 Flutes - Uncoated
• 7.5mm End Mill Standard Length. Single End Square. Shank OD 8mm Flute Length 19mm OAL 63mm - 2 Flutes - Uncoated
• 7mm End Mill Standard Length. Single End Square. Shank OD 8mm Flute Length 19mm OAL 63mm - 2 Flutes - Uncoated
• 6.5mm End Mill Standard Length. Single End Square. Shank OD 8mm Flute Length 19mm OAL 63mm - 2 Flutes - Uncoated
• 6mm End Mill Standard Length. Single End Square. Shank OD 6mm Flute Length 19mm OAL 63mm - 2 Flutes - Uncoated
• 5.5mm End Mill Standard Length. Single End Square. Shank OD 6mm Flute Length 19mm OAL 63mm - 2 Flutes - Uncoated
• 5mm End Mill Standard Length. Single End Square. Shank OD 6mm Flute Length 16mm OAL 50mm - 2 Flutes - Uncoated
• 4.5mm End Mill Standard Length. Single End Square. Shank OD 6mm Flute Length 14mm OAL 50mm - 2 Flutes - Uncoated
• 4mm End Mill Standard Length. Single End Square. Shank OD 4mm Flute Length 14mm OAL 50mm - 2 Flutes - Uncoated
• 3.5mm End Mill Standard Length. Single End Square. Shank OD 4mm Flute Length 12mm OAL 50mm - 2 Flutes - Uncoated
• 3mm End Mill Standard Length. Single End Square. Shank OD 3mm Flute Length 12mm OAL 38mm - 2 Flutes - Uncoated
• 2.5mm End Mill Standard Length. Single End Square. Shank OD 3mm Flute Length 7mm OAL 38mm - 2 Flutes - Uncoated
• 2mm End Mill Standard Length. Single End Square. Shank OD 3mm Flute Length 6mm OAL 38mm - 2 Flutes - Uncoated
• 1.5mm End Mill Standard Length. Single End Square. Shank OD 3mm Flute Length 5mm OAL 38mm - 2 Flutes - Uncoated
• 25mm End Mill Standard Length. Single End Square. Shank OD 25mm Flute Length 38mm OAL 100mm - 4 Flutes - TiCN Coat
• 24.5mm End Mill Standard Length. Single End Square. Shank OD 25mm Flute Length 38mm OAL 100mm - 4 Flutes - TiCN Coat
• 24mm End Mill Standard Length. Single End Square. Shank OD 25mm Flute Length 38mm OAL 100mm - 4 Flutes - TiCN Coat
• 23.5mm End Mill Standard Length. Single End Square. Shank OD 25mm Flute Length 38mm OAL 100mm - 4 Flutes - TiCN Coat
• 23mm End Mill Standard Length. Single End Square. Shank OD 25mm Flute Length 38mm OAL 100mm - 4 Flutes - TiCN Coat
• 22.5mm End Mill Standard Length. Single End Square. Shank OD 25mm Flute Length 38mm OAL 100mm - 4 Flutes - TiCN Coat
• 22mm End Mill Standard Length. Single End Square. Shank OD 22mm Flute Length 38mm OAL 100mm - 4 Flutes - TiCN Coat
• 21.5mm End Mill Standard Length. Single End Square. Shank OD 22mm Flute Length 38mm OAL 100mm - 4 Flutes - TiCN Coat
• 21mm End Mill Standard Length. Single End Square. Shank OD 22mm Flute Length 38mm OAL 100mm - 4 Flutes - TiCN Coat
• 20.5mm End Mill Standard Length. Single End Square. Shank OD 22mm Flute Length 38mm OAL 100mm - 4 Flutes - TiCN Coat
• 20mm End Mill Standard Length. Single End Square. Shank OD 20mm Flute Length 38mm OAL 100mm - 4 Flutes - TiCN Coat
• 19.5mm End Mill Standard Length. Single End Square. Shank OD 20mm Flute Length 38mm OAL 100mm - 4 Flutes - TiCN Coat
• 19mm End Mill Standard Length. Single End Square. Shank OD 20mm Flute Length 38mm OAL 100mm - 4 Flutes - TiCN Coat
• 18.5mm End Mill Standard Length. Single End Square. Shank OD 20mm Flute Length 38mm OAL 100mm - 4 Flutes - TiCN Coat
• 18mm End Mill Standard Length. Single End Square. Shank OD 18mm Flute Length 36mm OAL 100mm - 4 Flutes - TiCN Coat
• 17.5mm End Mill Standard Length. Single End Square. Shank OD 18mm Flute Length 36mm OAL 100mm - 4 Flutes - TiCN Coat
• 17mm End Mill Standard Length. Single End Square. Shank OD 18mm Flute Length 36mm OAL 100mm - 4 Flutes - TiCN Coat
• 16.5mm End Mill Standard Length. Single End Square. Shank OD 18mm Flute Length 36mm OAL 100mm - 4 Flutes - TiCN Coat
• 16mm End Mill Standard Length. Single End Square. Shank OD 16mm Flute Length 32mm OAL 88mm - 4 Flutes - TiCN Coat
• 15.5mm End Mill Standard Length. Single End Square. Shank OD 16mm Flute Length 32mm OAL 88mm - 4 Flutes - TiCN Coat
• 15mm End Mill Standard Length. Single End Square. Shank OD 16mm Flute Length 32mm OAL 88mm - 4 Flutes - TiCN Coat
• 14.5mm End Mill Standard Length. Single End Square. Shank OD 16mm Flute Length 32mm OAL 88mm - 4 Flutes - TiCN Coat
• 14mm End Mill Standard Length. Single End Square. Shank OD 14mm Flute Length 30mm OAL 88mm - 4 Flutes - TiCN Coat
• 13.5mm End Mill Standard Length. Single End Square. Shank OD 14mm Flute Length 30mm OAL 88mm - 4 Flutes - TiCN Coat
• 13mm End Mill Standard Length. Single End Square. Shank OD 14mm Flute Length 30mm OAL 88mm - 4 Flutes - TiCN Coat
• 12.5mm End Mill Standard Length. Single End Square. Shank OD 14mm Flute Length 30mm OAL 75mm - 4 Flutes - TiCN Coat
• 12mm End Mill Standard Length. Single End Square. Shank OD 12mm Flute Length 25mm OAL 75mm - 4 Flutes - TiCN Coat
• 11.5mm End Mill Standard Length. Single End Square. Shank OD 12mm Flute Length 25mm OAL 75mm - 4 Flutes - TiCN Coat
• 11mm End Mill Standard Length. Single End Square. Shank OD 12mm Flute Length 25mm OAL 70mm - 4 Flutes - TiCN Coat
• 10.5mm End Mill Standard Length. Single End Square. Shank OD 12mm Flute Length 25mm OAL 70mm - 4 Flutes - TiCN Coat
• 10mm End Mill Standard Length. Single End Square. Shank OD 10mm Flute Length 22mm OAL 70mm - 4 Flutes - TiCN Coat
• 9.5mm End Mill Standard Length. Single End Square. Shank OD 10mm Flute Length 22mm OAL 70mm - 4 Flutes - TiCN Coat
• 9mm End Mill Standard Length. Single End Square. Shank OD 10mm Flute Length 22mm OAL 70mm - 4 Flutes - TiCN Coat
• 8.5mm End Mill Standard Length. Single End Square. Shank OD 10mm Flute Length 22mm OAL 70mm - 4 Flutes - TiCN Coat
• 8mm End Mill Standard Length. Single End Square. Shank OD 8mm Flute Length 19mm OAL 63mm - 4 Flutes - TiCN Coat
• 7.5mm End Mill Standard Length. Single End Square. Shank OD 8mm Flute Length 19mm OAL 63mm - 4 Flutes - TiCN Coat
• 7mm End Mill Standard Length. Single End Square. Shank OD 8mm Flute Length 19mm OAL 63mm - 4 Flutes - TiCN Coat
• 6.5mm End Mill Standard Length. Single End Square. Shank OD 8mm Flute Length 19mm OAL 63mm - 4 Flutes - TiCN Coat
• 6mm End Mill Standard Length. Single End Square. Shank OD 6mm Flute Length 19mm OAL 63mm - 4 Flutes - TiCN Coat
• 5.5mm End Mill Standard Length. Single End Square. Shank OD 6mm Flute Length 19mm OAL 63mm - 4 Flutes - TiCN Coat
• 5mm End Mill Standard Length. Single End Square. Shank OD 6mm Flute Length 16mm OAL 50mm - 4 Flutes - TiCN Coat
• 4.5mm End Mill Standard Length. Single End Square. Shank OD 6mm Flute Length 14mm OAL 50mm - 4 Flutes - TiCN Coat
• 4mm End Mill Standard Length. Single End Square. Shank OD 4mm Flute Length 14mm OAL 50mm - 4 Flutes - TiCN Coat
• 3.5mm End Mill Standard Length. Single End Square. Shank OD 4mm Flute Length 12mm OAL 50mm - 4 Flutes - TiCN Coat
• 3mm End Mill Standard Length. Single End Square. Shank OD 3mm Flute Length 12mm OAL 38mm - 4 Flutes - TiCN Coat
• 2.5mm End Mill Standard Length. Single End Square. Shank OD 3mm Flute Length 7mm OAL 38mm - 4 Flutes - TiCN Coat
• 2mm End Mill Standard Length. Single End Square. Shank OD 3mm Flute Length 6mm OAL 38mm - 4 Flutes - TiCN Coat
• 1.5mm End Mill Standard Length. Single End Square. Shank OD 3mm Flute Length 5mm OAL 38mm - 4 Flutes - TiCN Coat
• 1mm End Mill Standard Length. Single End Square. Shank OD 3mm Flute Length 3mm OAL 38mm - 4 Flutes - TiCN Coat
• 25mm End Mill Standard Length. Single End Square. Shank OD 25mm Flute Length 38mm OAL 100mm - 3 Flutes - TiCN Coat
• 24.5mm End Mill Standard Length. Single End Square. Shank OD 25mm Flute Length 38mm OAL 100mm - 3 Flutes - TiCN Coat
• 24mm End Mill Standard Length. Single End Square. Shank OD 25mm Flute Length 38mm OAL 100mm - 3 Flutes - TiCN Coat
• 23.5mm End Mill Standard Length. Single End Square. Shank OD 25mm Flute Length 38mm OAL 100mm - 3 Flutes - TiCN Coat
• 23mm End Mill Standard Length. Single End Square. Shank OD 25mm Flute Length 38mm OAL 100mm - 3 Flutes - TiCN Coat
• 22.5mm End Mill Standard Length. Single End Square. Shank OD 25mm Flute Length 38mm OAL 100mm - 3 Flutes - TiCN Coat
• 22mm End Mill Standard Length. Single End Square. Shank OD 22mm Flute Length 38mm OAL 100mm - 3 Flutes - TiCN Coat
• 21.5mm End Mill Standard Length. Single End Square. Shank OD 22mm Flute Length 38mm OAL 100mm - 3 Flutes - TiCN Coat
• 21mm End Mill Standard Length. Single End Square. Shank OD 22mm Flute Length 38mm OAL 100mm - 3 Flutes - TiCN Coat
• 20.5mm End Mill Standard Length. Single End Square. Shank OD 22mm Flute Length 38mm OAL 100mm - 3 Flutes - TiCN Coat
• 20mm End Mill Standard Length. Single End Square. Shank OD 20mm Flute Length 38mm OAL 100mm - 3 Flutes - TiCN Coat
• 19.5mm End Mill Standard Length. Single End Square. Shank OD 20mm Flute Length 38mm OAL 100mm - 3 Flutes - TiCN Coat
• 19mm End Mill Standard Length. Single End Square. Shank OD 20mm Flute Length 38mm OAL 100mm - 3 Flutes - TiCN Coat
• 18.5mm End Mill Standard Length. Single End Square. Shank OD 20mm Flute Length 38mm OAL 100mm - 3 Flutes - TiCN Coat
• 18mm End Mill Standard Length. Single End Square. Shank OD 18mm Flute Length 36mm OAL 100mm - 3 Flutes - TiCN Coat
• 17.5mm End Mill Standard Length. Single End Square. Shank OD 18mm Flute Length 36mm OAL 100mm - 3 Flutes - TiCN Coat
• 17mm End Mill Standard Length. Single End Square. Shank OD 18mm Flute Length 36mm OAL 100mm - 3 Flutes - TiCN Coat
• 16.5mm End Mill Standard Length. Single End Square. Shank OD 18mm Flute Length 36mm OAL 100mm - 3 Flutes - TiCN Coat
• 16mm End Mill Standard Length. Single End Square. Shank OD 16mm Flute Length 32mm OAL 88mm - 3 Flutes - TiCN Coat
• 15.5mm End Mill Standard Length. Single End Square. Shank OD 16mm Flute Length 32mm OAL 88mm - 3 Flutes - TiCN Coat
• 15mm End Mill Standard Length. Single End Square. Shank OD 16mm Flute Length 32mm OAL 88mm - 3 Flutes - TiCN Coat
• 14.5mm End Mill Standard Length. Single End Square. Shank OD 16mm Flute Length 32mm OAL 88mm - 3 Flutes - TiCN Coat
• 14mm End Mill Standard Length. Single End Square. Shank OD 14mm Flute Length 30mm OAL 88mm - 3 Flutes - TiCN Coat
• 13.5mm End Mill Standard Length. Single End Square. Shank OD 14mm Flute Length 30mm OAL 88mm - 3 Flutes - TiCN Coat
• 13mm End Mill Standard Length. Single End Square. Shank OD 14mm Flute Length 30mm OAL 88mm - 3 Flutes - TiCN Coat
• 12.5mm End Mill Standard Length. Single End Square. Shank OD 14mm Flute Length 30mm OAL 75mm - 3 Flutes - TiCN Coat
• 12mm End Mill Standard Length. Single End Square. Shank OD 12mm Flute Length 25mm OAL 75mm - 3 Flutes - TiCN Coat
• 11.5mm End Mill Standard Length. Single End Square. Shank OD 12mm Flute Length 25mm OAL 75mm - 3 Flutes - TiCN Coat
• 11mm End Mill Standard Length. Single End Square. Shank OD 12mm Flute Length 25mm OAL 70mm - 3 Flutes - TiCN Coat
• 10.5mm End Mill Standard Length. Single End Square. Shank OD 12mm Flute Length 25mm OAL 70mm - 3 Flutes - TiCN Coat
• 10mm End Mill Standard Length. Single End Square. Shank OD 10mm Flute Length 22mm OAL 70mm - 3 Flutes - TiCN Coat
• 9.5mm End Mill Standard Length. Single End Square. Shank OD 10mm Flute Length 22mm OAL 70mm - 3 Flutes - TiCN Coat
• 9mm End Mill Standard Length. Single End Square. Shank OD 10mm Flute Length 22mm OAL 70mm - 3 Flutes - TiCN Coat
• 8.5mm End Mill Standard Length. Single End Square. Shank OD 10mm Flute Length 22mm OAL 70mm - 3 Flutes - TiCN Coat
• 8mm End Mill Standard Length. Single End Square. Shank OD 8mm Flute Length 19mm OAL 63mm - 3 Flutes - TiCN Coat
• 7.5mm End Mill Standard Length. Single End Square. Shank OD 8mm Flute Length 19mm OAL 63mm - 3 Flutes - TiCN Coat
• 7mm End Mill Standard Length. Single End Square. Shank OD 8mm Flute Length 19mm OAL 63mm - 3 Flutes - TiCN Coat
• 6.5mm End Mill Standard Length. Single End Square. Shank OD 8mm Flute Length 19mm OAL 63mm - 3 Flutes - TiCN Coat
• 6mm End Mill Standard Length. Single End Square. Shank OD 6mm Flute Length 19mm OAL 63mm - 3 Flutes - TiCN Coat
• 5.5mm End Mill Standard Length. Single End Square. Shank OD 6mm Flute Length 19mm OAL 63mm - 3 Flutes - TiCN Coat
• 5mm End Mill Standard Length. Single End Square. Shank OD 6mm Flute Length 16mm OAL 50mm - 3 Flutes - TiCN Coat
• 4.5mm End Mill Standard Length. Single End Square. Shank OD 6mm Flute Length 14mm OAL 50mm - 3 Flutes - TiCN Coat
• 4mm End Mill Standard Length. Single End Square. Shank OD 4mm Flute Length 14mm OAL 50mm - 3 Flutes - TiCN Coat
• 3.5mm End Mill Standard Length. Single End Square. Shank OD 4mm Flute Length 12mm OAL 50mm - 3 Flutes - TiCN Coat
• 3mm End Mill Standard Length. Single End Square. Shank OD 3mm Flute Length 12mm OAL 38mm - 3 Flutes - TiCN Coat
• 2.5mm End Mill Standard Length. Single End Square. Shank OD 3mm Flute Length 7mm OAL 38mm - 3 Flutes - TiCN Coat
• 2mm End Mill Standard Length. Single End Square. Shank OD 3mm Flute Length 6mm OAL 38mm - 3 Flutes - TiCN Coat
• 1.5mm End Mill Standard Length. Single End Square. Shank OD 3mm Flute Length 5mm OAL 38mm - 3 Flutes - TiCN Coat
• 1mm End Mill Standard Length. Single End Square. Shank OD 3mm Flute Length 3mm OAL 38mm - 3 Flutes - TiCN Coat
• 25mm End Mill Standard Length. Single End Square. Shank OD 25mm Flute Length 38mm OAL 100mm - 2 Flutes - TiCN Coat
• 24.5mm End Mill Standard Length. Single End Square. Shank OD 25mm Flute Length 38mm OAL 100mm - 2 Flutes - TiCN Coat
• 24mm End Mill Standard Length. Single End Square. Shank OD 25mm Flute Length 38mm OAL 100mm - 2 Flutes - TiCN Coat
• 23.5mm End Mill Standard Length. Single End Square. Shank OD 25mm Flute Length 38mm OAL 100mm - 2 Flutes - TiCN Coat
• 23mm End Mill Standard Length. Single End Square. Shank OD 25mm Flute Length 38mm OAL 100mm - 2 Flutes - TiCN Coat
• 22.5mm End Mill Standard Length. Single End Square. Shank OD 25mm Flute Length 38mm OAL 100mm - 2 Flutes - TiCN Coat
• 22mm End Mill Standard Length. Single End Square. Shank OD 22mm Flute Length 38mm OAL 100mm - 2 Flutes - TiCN Coat
• 21.5mm End Mill Standard Length. Single End Square. Shank OD 22mm Flute Length 38mm OAL 100mm - 2 Flutes - TiCN Coat
• 21mm End Mill Standard Length. Single End Square. Shank OD 22mm Flute Length 38mm OAL 100mm - 2 Flutes - TiCN Coat
• 20.5mm End Mill Standard Length. Single End Square. Shank OD 22mm Flute Length 38mm OAL 100mm - 2 Flutes - TiCN Coat
• 20mm End Mill Standard Length. Single End Square. Shank OD 20mm Flute Length 38mm OAL 100mm - 2 Flutes - TiCN Coat
• 19.5mm End Mill Standard Length. Single End Square. Shank OD 20mm Flute Length 38mm OAL 100mm - 2 Flutes - TiCN Coat
• 19mm End Mill Standard Length. Single End Square. Shank OD 20mm Flute Length 38mm OAL 100mm - 2 Flutes - TiCN Coat
• 18.5mm End Mill Standard Length. Single End Square. Shank OD 20mm Flute Length 38mm OAL 100mm - 2 Flutes - TiCN Coat
• 18mm End Mill Standard Length. Single End Square. Shank OD 18mm Flute Length 36mm OAL 100mm - 2 Flutes - TiCN Coat
• 17.5mm End Mill Standard Length. Single End Square. Shank OD 18mm Flute Length 36mm OAL 100mm - 2 Flutes - TiCN Coat
• 17mm End Mill Standard Length. Single End Square. Shank OD 18mm Flute Length 36mm OAL 100mm - 2 Flutes - TiCN Coat
• 16.5mm End Mill Standard Length. Single End Square. Shank OD 18mm Flute Length 36mm OAL 100mm - 2 Flutes - TiCN Coat
• 16mm End Mill Standard Length. Single End Square. Shank OD 16mm Flute Length 32mm OAL 88mm - 2 Flutes - TiCN Coat
• 15.5mm End Mill Standard Length. Single End Square. Shank OD 16mm Flute Length 32mm OAL 88mm - 2 Flutes - TiCN Coat
• 15mm End Mill Standard Length. Single End Square. Shank OD 16mm Flute Length 32mm OAL 88mm - 2 Flutes - TiCN Coat
• 14.5mm End Mill Standard Length. Single End Square. Shank OD 16mm Flute Length 32mm OAL 88mm - 2 Flutes - TiCN Coat
• 14mm End Mill Standard Length. Single End Square. Shank OD 14mm Flute Length 30mm OAL 88mm - 2 Flutes - TiCN Coat
• 13.5mm End Mill Standard Length. Single End Square. Shank OD 14mm Flute Length 30mm OAL 88mm - 2 Flutes - TiCN Coat
• 13mm End Mill Standard Length. Single End Square. Shank OD 14mm Flute Length 30mm OAL 88mm - 2 Flutes - TiCN Coat
• 12.5mm End Mill Standard Length. Single End Square. Shank OD 14mm Flute Length 30mm OAL 75mm - 2 Flutes - TiCN Coat
• 12mm End Mill Standard Length. Single End Square. Shank OD 12mm Flute Length 25mm OAL 75mm - 2 Flutes - TiCN Coat
• 11.5mm End Mill Standard Length. Single End Square. Shank OD 12mm Flute Length 25mm OAL 75mm - 2 Flutes - TiCN Coat
• 11mm End Mill Standard Length. Single End Square. Shank OD 12mm Flute Length 25mm OAL 70mm - 2 Flutes - TiCN Coat
• 10.5mm End Mill Standard Length. Single End Square. Shank OD 12mm Flute Length 25mm OAL 70mm - 2 Flutes - TiCN Coat
• 10mm End Mill Standard Length. Single End Square. Shank OD 10mm Flute Length 22mm OAL 70mm - 2 Flutes - TiCN Coat
• 9.5mm End Mill Standard Length. Single End Square. Shank OD 10mm Flute Length 22mm OAL 70mm - 2 Flutes - TiCN Coat
• 9mm End Mill Standard Length. Single End Square. Shank OD 10mm Flute Length 22mm OAL 70mm - 2 Flutes - TiCN Coat
• 8.5mm End Mill Standard Length. Single End Square. Shank OD 10mm Flute Length 22mm OAL 70mm - 2 Flutes - TiCN Coat
• 8mm End Mill Standard Length. Single End Square. Shank OD 8mm Flute Length 19mm OAL 63mm - 2 Flutes - TiCN Coat
• 7.5mm End Mill Standard Length. Single End Square. Shank OD 8mm Flute Length 19mm OAL 63mm - 2 Flutes - TiCN Coat
• 7mm End Mill Standard Length. Single End Square. Shank OD 8mm Flute Length 19mm OAL 63mm - 2 Flutes - TiCN Coat
• 6.5mm End Mill Standard Length. Single End Square. Shank OD 8mm Flute Length 19mm OAL 63mm - 2 Flutes - TiCN Coat
• 6mm End Mill Standard Length. Single End Square. Shank OD 6mm Flute Length 19mm OAL 63mm - 2 Flutes - TiCN Coat
• 5.5mm End Mill Standard Length. Single End Square. Shank OD 6mm Flute Length 19mm OAL 63mm - 2 Flutes - TiCN Coat
• 5mm End Mill Standard Length. Single End Square. Shank OD 6mm Flute Length 16mm OAL 50mm - 2 Flutes - TiCN Coat
• 4.5mm End Mill Standard Length. Single End Square. Shank OD 6mm Flute Length 14mm OAL 50mm - 2 Flutes - TiCN Coat
• 4mm End Mill Standard Length. Single End Square. Shank OD 4mm Flute Length 14mm OAL 50mm - 2 Flutes - TiCN Coat
• 3.5mm End Mill Standard Length. Single End Square. Shank OD 4mm Flute Length 12mm OAL 50mm - 2 Flutes - TiCN Coat
• 3mm End Mill Standard Length. Single End Square. Shank OD 3mm Flute Length 12mm OAL 38mm - 2 Flutes - TiCN Coat
• 2.5mm End Mill Standard Length. Single End Square. Shank OD 3mm Flute Length 7mm OAL 38mm - 2 Flutes - TiCN Coat
• 2mm End Mill Standard Length. Single End Square. Shank OD 3mm Flute Length 6mm OAL 38mm - 2 Flutes - TiCN Coat
• 1.5mm End Mill Standard Length. Single End Square. Shank OD 3mm Flute Length 5mm OAL 38mm - 2 Flutes - TiCN Coat
• 1mm End Mill Standard Length. Single End Square. Shank OD 3mm Flute Length 3mm OAL 38mm - 2 Flutes - TiCN Coat
• 1mm End Mill Standard Length. Single End Square. Shank OD 3mm Flute Length 3mm OAL 38mm - 2 Flutes - Uncoated
• 5 gallon Bucket
• 1 Gallon Jug
• 16 oz Pint
• 2 oz Bottle
• SHARK5 125x17x1,5 T=13 Bore 32 Grit D64 Concentration WQ125 Bond PRO5
• SHARK4 200x17x1,5 T=13 Bore 32 Grit D64 Concentration WQ125 Bond CNC7
• SHARK4 125x17x1,5 T=13 Bore 32 Grit D64 Concentration WQ125 Bond PRO5
• 3A1 100x6x10 T=10 Bore 31.75 Grit D64 Concentration SY125 Hybrid Bond M405
• 3A1 100x4x6 T=10 Bore 32 Grit D76 Concentration WQ100 Bond UNI3
• 1V1/45° 125x10x10 T=10 Bore 31.75 Grit D64 Concentration SQ125 Hybrid Bond M413
• 1V1/45° 125x10x10,6 T=10 Bore 31.75 Grit D76 Concentration WN100 Bond TOP7
• 1V1/45° 125x10x10,6 T=10 Bore 31.75 Grit D76 Concentration W100 Bond TOP7
• 1V1/45° 125x10x10,6 T=10 Bore 31.75 Grit B107 Concentration W100 Bond TOP8
• 1V1/45° 125x10x10 T=10 Bore 31.75 Grit B91 Concentration SA125 Bond M413
• 1V1/45° 100x10x10 T=10 Bore 31.75 Grit D64 Concentration SQ125 Hybrid Bond M413
• 1B1V 125x15x10/15 T=15 Bore 31.75 Grit D64 Concentration SY125 Hybrid Bond M404
• 1B1V 125x12x8/6 T=9 Bore 31.75 Grit D91 Concentration WN125 Bond CNC3
• 1B1V 125x12x10/15 T=12 Bore 31.75 Grit D64 Concentration SY125 Hybrid Bond M404
• 1B1V 125x12x10 T=12 Bore 31.75 Grit D64 Concentration SY125 Hybrid Bond HP3
• 1B1V 125x10x10/15 T=10 Bore 31.75 Grit D64 Concentration SY125 Hybrid Bond M404
• 1B1V 125x10x10 T=10 Bore 31.75 Grit D64 Concentration SY125 Hybrid Bond HP3
• 1B1V 100x12x10/15 T=12 Bore 31.75 Grit D64 Concentration SY125 Hybrid Bond M404
• 1B1V 100x15x10/15 T=15 Bore 31.75 Grit D64 Concentration SY125 Hybrid Bond M404
• 1B1V 100x10x10/15 T=10 Bore 31.75 Grit D64 Concentration SY125 Hybrid Bond M404
• 1V1/45° 75x10x10 T=10 Bore 31,75 Grit D64 Concentration SQ125 Hybrid Bond M413
• 1B1V45° 150x10x15 T=10 Bore 31,75 Grit D64 Concentration SQ125 Hybrid Bond M413
• 1B1/45° 125x6x15 T=6 Bore 31.75 Grit D64 Concentration SQ125 Hybrid Bond M413
• 1A1R 200x1,2x7 T=1 Bore 31.75 Grit D126 Concentration W100 Bond DRY7
• 1A1R 200x1,2x7 T=1 Bore 31.75 Grit D126 Concentration W100 Bond CNC3
• 1A1R 200x1,2x7 T=1 Bore 31.75 Grit B151 Concentration WD100 Bond CNC2
• 1A1R 150x1,2x7 T=1 Bore 31.75 Grit D151 Concentration WQ100 Bond CNC3
• 1A1R 150x1,2x7 T=1 Bore 31.75 Grit B151 Concentration WD100 Bond CNC2
• 1A1R 150x1,2x5 T=1 Bore 31.75 Grit D151 Concentration WQ100 Bond DRY7
• 1A1 150x12x15 T=12 Bore 31.75 Grit D64 Concentration SQ125 Hybrid Bond HP3
• 1A1 150x12x15 T=12 Bore 31.75 Grit D64 Concentration SQ125 Hybrid Bond HP3
• 1A1 150x12x10 T=12 Bore 31.75 Grit D64 Concentration SQ125 Hybrid Bond M404
• 1A1 150x10x15 T=10 Bore 31.75 Grit D64 Concentration SQ125 Hybrid Bond HP3
• 1A1 125x15x10 T=15 Bore 31.75 Grit D64 Concentration SQ125 Hybrid Bond M404
• 1A1 125x12x10 T=12 Bore 31.75 Grit D64 Concentration SQ125 Hybrid Bond M404
• 1A1 125x20x15 T=20 Bore 31.75 Grit D64 Concentration SQ125 Hybrid Bond HP3
• 1A1 125x16x15 T=16 Bore 31.75 Grit D64 Concentration SQ125 Hybrid Bond HP3
• 1A1 125x13x15 T=13 Bore 31.75 Grit D64 Concentration SQ125 Hybrid Bond HP3
• 1A1 125x12x6 T=12 Bore 31.75 Grit B91 Concentration WD125 Bond CNC2
• 1A1 125x12x15 T=12 Bore 31.75 Grit D64 Concentration SQ125 Hybrid Bond HP3
• 1A1 125x12x10 T=12 Bore 31.75 Grit B91 Concentration SA125 Hybrid Bond HP4
• 1A1 125x10x6 T=10 Bore 31.75 Grit D107 Concentration WN100 Bond DRY5
• 1A1 125x10x15 T=10 Bore 31.75 Grit D64 Concentration SQ125 Hybrid Bond HP3
• 1A1 125x10x10 T=10 Bore 31.75 Grit D64 Concentration SQ125 Hybrid Bond M404
• 1A1 125x10x10 T=10 Bore 31.75 Grit B91 Concentration SA125 Hybrid Bond HP4
• 1A1 100x12x10 T=12 Bore 31.75 Grit D64 Concentration SQ125 Hybrid Bond M404
• 1A1 100x15x10 T=15 Bore 31.75 Grit D64 Concentration SQ125 Hybrid Bond M404
• 1A1 100x12x15 T=12 Bore 31.75 Grit D64 Concentration SQ125 Hybrid Bond HP3
• 1A1 100x10x15 T=10 Bore 31.75 Grit D64 Concentration SQ125 Hybrid Bond HP3
• 1A1 100x10x10 T=10 Bore 31.75 Grit D64 Concentration SQ125 Hybrid Bond M404
• 1A1 100x8x10 T=8 Bore 31.75 Grit D64 Concentration SQ125 Hybrid Bond M405
• 1A1 100x12x6 T=12 Bore 31.75 Grit D91 Concentration W125 Bond CNC3
• 12V9P/45° 125x10x2 T=25 Bore 31.75 Grit D64 Concentration W125 Bond TOP7
• 12V9P/45° 100x8x2 T=20 Bore 31.75 Grit D91 Concentration WQ100 Bond DRY5
• 12V9P/45° 100x8x2 T=20 Bore 31.75 Grit D91 Concentration WN100 Bond DRY5
• 12V9P/45° 100x8x2 T=20 Bore 31.75 Grit D126 Concentration WN100 Bond DRY5
• 12V9P/45° 100x8x2 T=20 Bore 31.75 Grit B126 Concentration WD100 Bond DRY6
• 11V9G 100x10x2 T=35 Bore 31.75 Grit D64 Concentration W125 Polymide Bond EDG7
• 11V9G 75x8x2 T=35 Bore 31.75 Grit D64 Concentration SR125 Hybrid Bond M414
• 11V9G 125x10x3 T=44 Bore 31.75 Grit D64 Concentration SR125 Hybrid Bond M414
• 11V9G 125x10x3 T=35 Bore 31.75 Grit D126 Concentration WN75 Hybrid Bond DRY5
• 11V9G 100x10x3 T=35 Bore 31.75 Grit D64 Concentration W125 Bond TOP7
• 11V9G 100x10x3 T=35 Bore 31.75 Grit D54 Concentration SQ125 Bond M414
• 11V9G 100x10x3 T=35 Bore 31.75 Grit D54 Concentration SR100 Hybrid Bond M414
• 11V9G 100x10x3 T=35 Bore 31.75 Grit D64 Concentration SR125 Hybrid Bond M414
• 11V9G 100x10x3 T=35 Bore 31.75 Grit D64 Concentration WN125 Bond TOP7
• 11V9G 100x10x3 T=35 Bore 31.75 Grit D54 Concentration SRN125 Bond M414
• 11V9G 100x10x3 T=35 Bore 31.75 Grit D46 Concentration SR100 Hybrid Bond M414
• 11V9G 100x10x3 T=35 Bore 31.75 Grit D91 Concentration W125 Bond TOP7
• 11V9G 100x10x3 T=35 Bore 31.75 Grit D64 Concentration W125 Polymide Bond EDG7
• 11V9G 100x10x3 T=35 Bore 31.75 Grit D54 Concentration W125 Polymide Bond EDG7
• 11V9G 100x10x3 T=35 Bore 31.75 Grit B91 Concentration W125 Bond TOP8
• 11V9G 100x10x3 T=35 Bore 31.75 Grit B91 Concentration SAN125 Bond M414
• 11V9G 100x10x2 T=35 Bore 31.75 Grit D64 Concentration WN125 Bond TOP7
• 11V9G 100x10x2 T=35 Bore 31.75 Grit D64 Concentration WN125 Bond PRO7
• 11V9 100x10x3 T=35 Bore 31.75 Grit D91 Concentration WQ100 Bond DRY5
• 11V9 100x10x3 T=35 Bore 31.75 Grit D91 Concentration WN75 Bond DRY5
• 11V9 100x10x3 T=35 Bore 31.75 Grit D126 Concentration WQ100 Bond DRY5
• 11V9 100x10x3 T=35 Bore 31.75 Grit D126 Concentration W75 Bond UNI3
• 11V9 100x10x3 T=35 Bore 31.75 Grit D126 Concentration W75 Bond DRY5
• 11V9 100x10x2 T=35 Bore 31.75 Grit D91 Concentration WQ100 Bond DRY5
• 11V9 100x10x2 T=35 Bore 31.75 Grit D91 Concentration WN75 Bond DRY5
• 11V9 100x10x2 T=35 Bore 31.75 Grit D126 Concentration WQ100 Bond DRY5
• 11V9 100x10x2 T=35 Bore 31.75 Grit D126 Concentration WN75 Bond DRY5
• 11V9 100x10x2 T=35 Bore 31.75 Grit B91 Concentration WD75 Bond KS7
• 11V9 100x10x2 T=35 Bore 31.75 Grit B126 Concentration WD75 Bond KS7
• 11V5/20° 100x4x6 T=30 Bore 31.75 Grit D64 Concentration SR125 Hybrid Bond M414
• 11V5/20° 100x4x6 T=30 Bore 31.75 Grit D64 Concentration WN125 Bond TOP7
• 11V5/20° 100x4x6 T=30 Bore 31.75 Grit D46 Concentration W125 Bond TOP7
• 11AA2/AS 125x5x8 T=20 Bore 32 Grit D46/126 Concentration KR100/125 Bond CNC3/UNI3
• 11AA2/AS 125x5x6 T=18 Bore 32 Grit D46/126 Concentration W100/125 Bond DRY7/DRY7
• 11AA2/AS 125x5x6 T=18 Bore 32 Grit D46/126 Concentration W100/125 Bond CNC5/CNC5
• 11AA2/AS 125x5x6 T=18 Bore 32 Grit D46/126 Concentration KR100/125 Bond CNC3/UNI3
• 11A2/ASB 100x4x6 T=30 Bore 31.75 Grit D64 Concentration SR125 Hybrid Bond M414
• 11A2 75x4x6 T= 45 Bore 31.75 Grit D64 Concentration SQ125 Hybrid Bond M414
• 11A2 75x4x6 T= 45 Bore 31.75 Grit D54 Concentration SQ125 Hybrid Bond M414
• 11A2 75x4x6 T= 45 Bore 31.75 Grit D46 Concentration SQ100 Hybrid Bond M414
• 11A2 100x4x6 T = 30 Bore 31.75 Grit D30 Concentration SQ100 Hybrid Bond EDG7
• S20U-SVUC L 3 - 93° Side & End Cutting Edge Angle
• S20U-SVUC R 3 - 93° Side & End Cutting Edge Angle
• S16T-SVUC L 2D - 93° Side & End Cutting Edge Angle
• S16T-SVUC R 2D - 93° Side & End Cutting Edge Angle
• S12S-SVUC L 2E - 93° Side & End Cutting Edge Angle
• S12S-SVUC R 2E - 93° Side & End Cutting Edge Angle
• S10R-SVUC L 2E - 93° Side & End Cutting Edge Angle
• S10R-SVUC R 2E - 93° Side & End Cutting Edge Angle
• A12S-STFC L 2 - 90° Side & End Cutting Edge Angle
• A12S-STFC R 2 - 90° Side & End Cutting Edge Angle
• A10R-STFC L 2 - 90° Side & End Cutting Edge Angle
• A10R-STFC R 2 - 90° Side & End Cutting Edge Angle
• A08M-STFC L 2 - 90° Side & End Cutting Edge Angle
• A08M-STFC R 2 - 90° Side & End Cutting Edge Angle
• A06M-STFC L 2 - 90° Side & End Cutting Edge Angle
• A06M-STFC R 2 - 90° Side & End Cutting Edge Angle
• A12S-SDUC L 3M - 93° Side & End Cutting Edge Angle
• A12S-SDUC R 3M - 93° Side & End Cutting Edge Angle
• A10R-SDUC L 2 - 93° Side & End Cutting Edge Angle
• A10R-SDUC R 2 - 93° Side & End Cutting Edge Angle
• A08M-SDUC L 2 - 93° Side & End Cutting Edge Angle
• A08M-SDUC R 2 - 93° Side & End Cutting Edge Angle
• A06M-SDUC L 2 - 93° Side & End Cutting Edge Angle
• A06M-SDUC R 2 - 93° Side & End Cutting Edge Angle
• A12S-SCLC L 3M - 95° Side & End Cutting Edge Angle
• A12S-SCLC R 3M - 95° Side & End Cutting Edge Angle
• A10R-SCLC L 3 - 95° Side & End Cutting Edge Angle
• A10R-SCLC R 3 - 95° Side & End Cutting Edge Angle
• A10R-SCLC L 2 - 95° Side & End Cutting Edge Angle
• A10R-SCLC R 2 - 95° Side & End Cutting Edge Angle
• A08M-SCLC L 2 - 95° Side & End Cutting Edge Angle
• A08M-SCLC R 2 - 95° Side & End Cutting Edge Angle
• A06M-SCLC L 2 - 95° Side & End Cutting Edge Angle
• A06M-SCLC R 2 - 95° Side & End Cutting Edge Angle
• A24U-MWLN L 4 - 95° Side & End Cutting Edge Angle
• A24U-MWLN R 4 - 95° Side & End Cutting Edge Angle
• A20U-MWLN L 4 - 95° Side & End Cutting Edge Angle
• A20U-MWLN R 4 - 95° Side & End Cutting Edge Angle
• A16T-MWLN L 4 - 95° Side & End Cutting Edge Angle
• A16T-MWLN R 4 - 95° Side & End Cutting Edge Angle
• A24U-MVUN L 3 - 93° Side & End Cutting Edge Angle
• A24U-MVUN R 3 - 93° Side & End Cutting Edge Angle
• A20U-MVUN L 3 - 93° Side & End Cutting Edge Angle
• A20U-MVUN R 3 - 93° Side & End Cutting Edge Angle
• A16T-MVUN L 3 - 93° Side & End Cutting Edge Angle
• A16T-MVUN R 3 - 93° Side & End Cutting Edge Angle
• A28U-MTFN L 4 - 90° Side & End Cutting Edge Angle
• A28U-MTFN R 4 - 90° Side & End Cutting Edge Angle
• A24U-MTFN L 4 - 90° Side & End Cutting Edge Angle
• A24U-MTFN R 4 - 90° Side & End Cutting Edge Angle
• A20U-MTFN L 3 - 90° Side & End Cutting Edge Angle
• A20U-MTFN R 3 - 90° Side & End Cutting Edge Angle
• A16T-MTFN L 3 - 90° Side & End Cutting Edge Angle
• A16T-MTFN R 3 - 90° Side & End Cutting Edge Angle
• S24U-MSKN L 4 - 75° Side & End Cutting Edge Angle
• S24U-MSKN R 4 - 75° Side & End Cutting Edge Angle
• S20U-MSKN L 4 - 75° Side & End Cutting Edge Angle
• S20U-MSKN R 4 - 75° Side & End Cutting Edge Angle
• A24U-MDUN L 4 - 93° Side & End Cutting Edge Angle
• A24U-MDUN R 4 - 93° Side & End Cutting Edge Angle
• A20U-MDUN L 4 - 93° Side & End Cutting Edge Angle
• A20U-MDUN R 4 - 93° Side & End Cutting Edge Angle
• A16T-MDUN L 4 - 93° Side & End Cutting Edge Angle
• A16T-MDUN R 4 - 93° Side & End Cutting Edge Angle
• A28U-MCLN L 4 - 95° Side & End Cutting Edge Angle
• A28U-MCLN R 4 - 95° Side & End Cutting Edge Angle
• A24U-MCLN L 4 - 95° Side & End Cutting Edge Angle
• A24U-MCLN R 4 - 95° Side & End Cutting Edge Angle
• A20U-MCLN L 4 - 95° Side & End Cutting Edge Angle
• A20U-MCLN R 4 - 95° Side & End Cutting Edge Angle
• A16T-MCLN L 4 - 95° Side & End Cutting Edge Angle
• A16T-MCLN R 4 - 95° Side & End Cutting Edge Angle
• SVVC N 20-3D Tool Holder 72°30' End Cutting Edge Angle VC__33__ Insert
• SVVC N 16-3D Tool Holder 72°30' End Cutting Edge Angle VC__33__ Insert
• SVVC N 12-3B Tool Holder 72°30' End Cutting Edge Angle VC__33__ Insert
• SVJC L 20-3D Tool Holder 90° End Cutting Edge Angle VC__33__ Insert
• SVJC R 20-3D Tool Holder 93° End Cutting Edge Angle VC__33__ Insert
• SVJC L 16-3D Tool Holder 90° End Cutting Edge Angle VC__33__ Insert
• SVJC R 16-3D Tool Holder 93° End Cutting Edge Angle VC__33__ Insert
• SVJC L 12-3B Tool Holder 90° End Cutting Edge Angle VC__33__ Insert
• SVJC R 12-3B Tool Holder 93° End Cutting Edge Angle VC__33__ Insert
• STGC L 16-3D Tool Holder 90° End Cutting Edge Angle TC__32.5__ Insert
• STGC R 16-3D Tool Holder 90° End Cutting Edge Angle TC__32.5__ Insert
• STGC L 12-3B Tool Holder 90° End Cutting Edge Angle TC__32.5__ Insert
• STGC R 12-3B Tool Holder 90° End Cutting Edge Angle TC__32.5__ Insert
• STGC L 103 Tool Holder 90° End Cutting Edge Angle TC__32.5__ Insert
• STGC R 103 Tool Holder 90° End Cutting Edge Angle TC__32.5__ Insert
• STGC L 082 Tool Holder 90° End Cutting Edge Angle TC__21.5__ Insert
• STGC R 082 Tool Holder 90° End Cutting Edge Angle TC__21.5__ Insert
• STGC L 062 Tool Holder 90° End Cutting Edge Angle TC__21.5__ Insert
• STGC R 062 Tool Holder 90° End Cutting Edge Angle TC__21.5__ Insert
• SDPC N 16-3D Tool Holder 62°30' End Cutting Edge Angle DC__32.5__ Insert
• SDPC N 12-3B Tool Holder 62°30' End Cutting Edge Angle DC__32.5__ Insert
• SDPC N 103 Tool Holder 62°30' End Cutting Edge Angle DC__32.5__ Insert
• SDPC N 082 Tool Holder 62°30' End Cutting Edge Angle DC__21.5__ Insert
• SDPC N 062 Tool Holder 62°30' End Cutting Edge Angle DC__21.5__ Insert
• SDJC L 16-3D Tool Holder 93° End Cutting Edge Angle DC__32.5__ Insert
• SDJC R 16-3D Tool Holder 93° End Cutting Edge Angle DC__32.5__ Insert
• SDJC L 12-3B Tool Holder 93° End Cutting Edge Angle DC__32.5__ Insert
• SDJC R 12-3B Tool Holder 93° End Cutting Edge Angle DC__32.5__ Insert
• SDJC L 12-2B Tool Holder 93° End Cutting Edge Angle DC__21.5__ Insert
• SDJC R 12-2B Tool Holder 93° End Cutting Edge Angle DC__21.5__ Insert
• SDJC L 102 Tool Holder 93° End Cutting Edge Angle DC__21.5__ Insert
• SDJC R 102 Tool Holder 93° End Cutting Edge Angle DC__21.5__ Insert
• SDJC L 082 Tool Holder 93° End Cutting Edge Angle DC__21.5__ Insert
• SDJC R 082 Tool Holder 93° End Cutting Edge Angle DC__21.5__ Insert
• SDJC L 062 Tool Holder 93° End Cutting Edge Angle DC__21.5__ Insert
• SDJC R 062 Tool Holder 93° End Cutting Edge Angle DC__21.5__ Insert
• SCLC L 16-4D Tool Holder 95° End Cutting Edge Angle CC__43__ Insert
• SCLC R 16-4D Tool Holder 95° End Cutting Edge Angle CC__43__ Insert
• SCLC L 12-4B Tool Holder 95° End Cutting Edge Angle CC__43__ Insert
• SCLC R 12-4B Tool Holder 95° End Cutting Edge Angle CC__43__ Insert
• SCLC L 16-3D Tool Holder 95° End Cutting Edge Angle CC__32.5__ Insert
• SCLC R 16-3D Tool Holder 95° End Cutting Edge Angle CC__32.5__ Insert
• SCLC L 12-3B Tool Holder 95° End Cutting Edge Angle CC__32.5__ Insert
• SCLC R 12-3B Tool Holder 95° End Cutting Edge Angle CC__32.5__ Insert
• SCLC L 103 Tool Holder 95° End Cutting Edge Angle CC__32.5__ Insert
• SCLC R 103 Tool Holder 95° End Cutting Edge Angle CC__32.5__ Insert
• SCLC L 083 Tool Holder 95° End Cutting Edge Angle CC__32.5__ Insert
• SCLC R 083 Tool Holder 95° End Cutting Edge Angle CC__32.5__ Insert
• SCLC L 062 Tool Holder 95° End Cutting Edge Angle CC__21.5__ Insert
• SCLC R 062 Tool Holder 95° End Cutting Edge Angle CC__21.5__ Insert
• MTJN L S 20-4D Tool Holder 93° End Cutting Edge Angle TNM__43__ Insert
• MTJN R S 20-4D Tool Holder 93° End Cutting Edge Angle TNM__43__ Insert
• MTJN L S 16-4D Tool Holder 93° End Cutting Edge Angle TNM__43__ Insert
• MTJN R S 16-4D Tool Holder 93° End Cutting Edge Angle TNM__43__ Insert
• MTJN L S 16-3D Tool Holder 93° End Cutting Edge Angle TNM__33__ Insert
• MTJN R S 16-3D Tool Holder 93° End Cutting Edge Angle TNM__33__ Insert
• MTJN L S 12-3B Tool Holder 93° End Cutting Edge Angle TNM__33__ Insert
• MTJN R S 12-3B Tool Holder 93° End Cutting Edge Angle TNM__33__ Insert
• MTEN NS 16-4D Tool Holder 60° End Cutting Edge Angle TNM__43__ Insert
• MTEN NS 16-3D Tool Holder 60° End Cutting Edge Angle TNM__33__ Insert
• MTEN NS 12-3B Tool Holder 60° End Cutting Edge Angle TNM__33__ Insert
• MCRN L 24-6D Tool Holder 75° End Cutting Edge Angle CN__64__ Insert
• MCRN R 24-6D Tool Holder 75° End Cutting Edge Angle CN__64__ Insert
• MCLN L 24-6E Tool Holder 95° End Cutting Edge Angle CN__64__ Insert
• MCLN R 24-6E Tool Holder 95° End Cutting Edge Angle CN__64__ Insert
• MCLN L 24-5D Tool Holder 95° End Cutting Edge Angle CN__54__ Insert
• MCLN R 24-5D Tool Holder 95° End Cutting Edge Angle CN__54__ Insert
• SPMT 120408 Grade TL40
• SPMT 090308 Grade TL40
• SPMT 070308 Grade TL40
• SPMT 060304 Grade TL40
• 1.375" Drill Insert with 5.203" Cutting Length, OAL = 7.468", Maximum Depth = 4.125"
• 1.218" Drill Insert with 4.5" Cutting Length, OAL = 6.756", Maximum Depth = 3.654"
• 1.093" Drill Insert with 4.187" Cutting Length, OAL = 6.468", Maximum Depth = 3.279"
• 0.750" Drill Insert with 3.312" Cutting Length, OAL = 5.5", Maximum Depth = 2.25"
• 1.625" Drill Insert with 6.156" Cutting Length, OAL = 9.187", Maximum Depth = 4.875"
• 1.562" Drill Insert with 5.891" Cutting Length, OAL = 8.812", Maximum Depth = 4.686"
• 1.5" Drill Insert with 5.703" Cutting Length, OAL = 8.468", Maximum Depth = 4.5"
• 1.437" Drill Insert with 5.453" Cutting Length, OAL = 8.156", Maximum Depth = 4.311"
• 1.312" Drill Insert with 4.781" Cutting Length, OAL = 7.031", Maximum Depth = 3.936"
• 1.25" Drill Insert with 4.562" Cutting Length, OAL = 6.812", Maximum Depth = 3.75"
• 1.187" Drill Insert with 4.437" Cutting Length, OAL = 6.718", Maximum Depth = 3.561"
• 1.156" Drill Insert with 4.343" Cutting Length, OAL = 6.656", Maximum Depth = 3.468"
• 1.125" Drill Insert with 4.281" Cutting Length, OAL = 6.562", Maximum Depth = 3.375"
• 1.062" Drill Insert with 4.032" Cutting Length, OAL = 6.375", Maximum Depth = 3.186"
• 1.031" Drill Insert with 3.891" Cutting Length, OAL = 6.281", Maximum Depth = 3.093"
• 1" Drill Insert with 3.891" Cutting Length, OAL = 6.187", Maximum Depth = 3"
• 0.968" Drill Insert with 3.891" Cutting Length, OAL = 6.187", Maximum Depth = 2.904"
• 0.937" Drill Insert with 3.891" Cutting Length, OAL = 6.156", Maximum Depth = 2.811"
• 0.906" Drill Insert with 3.797" Cutting Length, OAL = 6.062", Maximum Depth = 2.718"
• 0.875" Drill Insert with 3.703" Cutting Length, OAL = 5.968", Maximum Depth = 2.625"
• 0.844" Drill Insert with 3.609" Cutting Length, OAL = 5.843", Maximum Depth = 2.532"
• 0.812" Drill Insert with 3.5" Cutting Length, OAL = 5.75", Maximum Depth = 2.436"
• 0.781" Drill Insert with 3.406" Cutting Length, OAL = 5.625", Maximum Depth = 2.343"
• 0.718" Drill Insert with 3.218" Cutting Length, OAL = 5.437", Maximum Depth = 2.154"
• 0.687" Drill Insert with 3.125" Cutting Length, OAL = 5.375", Maximum Depth = 2.061"
• 4" Shell Mill Cutter, Positive, 90° Exact Angle, Cutting Length 4" - OAL = 2" - d = 1.25" with 7 Pockets
• 3" Shell Mill Cutter, Positive, 90° Exact Angle, Cutting Length 3" - OAL = 2" - d = 1" with 6 Pockets
• 2.5" Shell Mill Cutter, Positive, 90° Exact Angle, Cutting Length 2.5" - OAL = 2" - d = 1" with 5 Pockets
• 2" Shell Mill Cutter, Positive, 90° Exact Angle, Cutting Length 2" - OAL = 2" - d = 0.75" with 5 Pockets
• 1.5" Shell Mill Cutter, Positive, 90° Exact Angle, Cutting Length 1.5" - OAL = 1.75" - d = 0.5" with 3 Pockets
• 1.25" Endmill Cutter, Positive, 90° Exact Angle, Cutting Length 3" - OAL = 8" with 3 Pockets
• 1.25" Endmill Cutter, Positive, 90° Exact Angle, Cutting Length 2" - OAL = 6" with 3 Pockets
• 1" Endmill Cutter, Positive, 90° Exact Angle, Cutting Length 3" - OAL = 8" with 2 Pockets
• 1" Endmill Cutter, Positive, 90° Exact Angle, Cutting Length 2" - OAL = 6" with 2 Pockets
• 4" Shell Mill Cutter, Positive, 90° Exact Angle, Cutting Length 4" - OAL = 2" - d = 1.25" with 7 Pockets
• 3" Shell Mill Cutter, Positive, 90° Exact Angle, Cutting Length 3" - OAL = 2" - d = 1" with 6 Pockets
• 2.5" Shell Mill Cutter, Positive, 90° Exact Angle, Cutting Length 2.5" - OAL = 2" - d = 1" with 5 Pockets
• 2" Shell Mill Cutter, Positive, 90° Exact Angle, Cutting Length 2" - OAL = 2" - d = 0.75" with 4 Pockets
• 3" Shell Mill Cutter, Positive, 90° Exact Angle, Cutting Length 3" - OAL = 2" - d = 1" with 7 Pockets
• 2.5" Shell Mill Cutter, Positive, 90° Exact Angle, Cutting Length 2.5" - OAL = 2" - d = 1" with 6 Pockets
• 2" Shell Mill Cutter, Positive, 90° Exact Angle, Cutting Length 2" - OAL = 2" - d = 0.75" with 5 Pockets
• 1.25" Endmill Cutter, Positive, 90° Exact Angle, Cutting Length 1.25" - OAL = 1.693" - d = 0.669" with 2 Pockets
• 1.25" Endmill Cutter, Positive, 90° Exact Angle, Cutting Length 1.25" - OAL = 1.693" - d = 0.669" with 3 Pockets
• 1" Endmill Cutter, Positive, 90° Exact Angle, Cutting Length 1" - OAL = 1.378" - d = 0.492" with 2 Pockets
• 0.75" Endmill Cutter, Positive, 90° Exact Angle, Cutting Length 0.75" - OAL = 1.181" - d = 0.413" with 2 Pockets
• 1.25" Endmill Cutter, Cutting Length 4.85" - OAL = 8" - D1 = 1.25" with 2 Pockets
• 1.25" Endmill Cutter, Cutting Length 1.85" - OAL = 5" - D1 = 1.25" with 2 Pockets
• 1.25" Endmill Cutter, Cutting Length 4.85" - OAL = 8" - D1 = 1.25" with 3 Pockets
• 1.25" Endmill Cutter, Cutting Length 1.85" - OAL = 5" - D1 = 1.25" with 3 Pockets
• 1" Endmill Cutter, Cutting Length 3.85" - OAL = 7" - D1 = 1" with 2 Pockets
• 1" Endmill Cutter, Cutting Length 1.85" - OAL = 5" - D1 = 1" with 2 Pockets
• 0.75" Endmill Cutter, Cutting Length 3.637" - OAL = 6" - D1 = 0.750" with 2 Pockets
• 0.75" Endmill Cutter, Cutting Length 1.637" - OAL = 4" - D1 = 0.750" with 2 Pockets
• 3" Shell Mill Cutter, Positive, 90° Exact Angle, Cutting Length 3" - OAL = 2" - d = 1'' - a = 0.07" with 8 Pockets
• 2.5" Shell Mill Cutter, Positive, 90° Exact Angle, Cutting Length 2.5" - OAL = 2" - d = 1'' - a = 0.07" with 6 Pockets
• 2" Shell Mill Cutter, Positive, 90° Exact Angle, Cutting Length 2" - OAL = 2" - d = 0.75'' - a = 0.07" with 5 Pockets
• 2" Shell Mill Cutter, Positive, 90° Exact Angle, Cutting Length 2" - OAL = 2" - d = 0.75'' - a = 0.055" with 6 Pockets
• 1.5" Shell Mill Cutter, Positive, 90° Exact Angle, Cutting Length 1.5" - OAL = 1.75" - d = 0.5'' - a = 0.07" with 5 Pockets
• 1.25" Endmill Cutter, Positive, 90° Exact Angle, Cutting Length 1.25" - OAL = 1.693" - a = 0.07" with 3 Pockets
• 1" Endmill Cutter, Positive, 90° Exact Angle, Cutting Length 1" - OAL = 1.378" - a = 0.055" with 2 Pockets
• 1.25" Endmill Cutter, Positive, 90° Exact Angle, Cutting Length 1.25" - OAL = 1.693" - a = 0.035" with 5 Pockets
• 1" Endmill Cutter, Positive, 90° Exact Angle, Cutting Length 1" - OAL = 1.378" - a = 0.035" with 4 Pockets
• 0.75" Endmill Cutter, Positive, 90° Exact Angle, Cutting Length 0.75" - OAL = 1.181" - a = 0.035" with 3 Pockets
• 1.25" Endmill Cutter, Positive, 90° Exact Angle, Cutting Length 1.693" - OAL = 8" - d = 1.25" with 3 Pockets
• 1.25" Endmill Cutter, Positive, 90° Exact Angle, Cutting Length 1.693" - OAL = 8" - d = 1.25" with 4 Pockets
• 1" Endmill Cutter, Positive, 90° Exact Angle, Cutting Length 1.378" - OAL = 6" - d = 1" with 2 Pockets
• 1" Endmill Cutter, Positive, 90° Exact Angle, Cutting Length 1.378" - OAL = 6" - d = 1" with 4 Pockets
• 3/4" Endmill Cutter, Positive, 90° Exact Angle, Cutting Length 1.181" - OAL = 6" - d = 0.75" with 3 Pockets
• RPMW 1204 Chip Breaker M0 T = 0.187" Grade TTIN25
• RPMW 1204 Chip Breaker M0 T = 0.187" Grade TTIN21
• RPMT 1204 Chip Breaker M0 T = 0.187" Grade TIN25
• RPMT 1204 Chip Breaker M0 T = 0.187" Grade TIN21
• RPMT120400-39 Chip Breaker T = 0.187" Grade TIN25
• RPMT 120400-39 Chip Breaker T = 0.187" Grade PM25
• RDMW 1604 Chip Breaker M0 T = 0.187" Grade TL40
• RDMW 1204 Chip Breaker M0 T = 0.187" Grade TL40
• RDMW 1204 Chip Breaker M0 T = 0.187" Grade TL20
• RDMW 12T3 Chip Breaker M0 T = 0.156" Grade TL40
• RDMW 12T3 Chip Breaker M0 T = 0.156" Grade TL20
• RDMW 1003 Chip Breaker M0 T = 0.125" Grade TL40
• RDMW 1003 Chip Breaker M0 T = 0.125" Grade TL20
• RDMT 1604 Chip Breaker M0 T = 0.187" Grade TL40
• RDMT 12T3 Chip Breaker M0 T = 0.156" Grade TL40
• RDMT 1003 Chip Breaker M0 T = 0.125" Grade TL40
• RDHW 1604 Chip Breaker M0 T = 0.187" Grade TL40
• RDHW 1604 Chip Breaker M0 T = 0.187" Grade TL20
• RDHW 12T3 Chip Breaker M0 T = 0.156" Grade TL40
• RDHW 12T3 Chip Breaker M0 T = 0.156'' Grade TL20
• RDHW 1003 Chip Breaker M0 T = 0.125" Grade TL40
• RDHW 1003 Chip Breaker M0 T = 0.125" Grade TL20
• SPMX 115506 Grade TL20
• SPMX 094506 Grade TL20
• SPMX 073505 Grade TL20
• SPMT 115506 Grade ML30
• SPMT 094506 Grade ML30
• SPMT 070305 Grade ML30
• SNMX 1206 ANSN GRADE ML30
• SEMT 1204 AFTN GRADE TIN28
• SEHT 43 AFN GRADE TIN21
• LNMM 151008 GRADE ML30
• LNMM 100605 GRADE ML30
• APKT 1604 PDR GRADE TIN21
• APKT 1003 PDTR GRADE TIN21
• APKT 1003 PDR GRADE TIN28
• SEHT 1204 AFFN-AL GRADE KM15
• APHT 1003 PDFR-AL GRADE KM15
• ADMW 1503 RADIUS 0.187'' GRADE TIN25
• ADMW 1503 RADIUS 0.171'' GRADE TIN25
• ADMW 1503 RADIUS 0.156'' GRADE TIN25
• ADMW 1503 RADIUS 0.125'' GRADE TIN25
• ADMW 1503 RADIUS 0.109'' GRADE TIN25
• ADMW 1503 RADIUS 0.093'' GRADE TIN25
• ADMW 1503 RADIUS 0.078'' GRADE TIN25
• ADMW 1503 RADIUS 0.062'' GRADE TIN25
• ADMW 1503 RADIUS 3/64" GRADE TIN25
• ADMW 1503 RADIUS 1/32" GRADE TIN25
• 1" Endmill Cutter, Positive, 45° Exact Angle Cutting Length 1.500" OAL 6.000" with 2 Pockets
• 1" Endmill Cutter, Positive, 45° Exact Angle Cutting Length 1.5" OAL 6" with 2 Pockets
• 0.750" Endmill Cutter, Adjustable Chamfering D min. 0.197" D max. 1.260" L = 3.397" Y 10° - 80° with 1 Pocket
• 5" Shell Mill Cutter, Positive, 45° Exact Angle Cutting Length 5" H = 2" d = 1.5" with 7 Pockets
• 4" Shell Mill Cutter, Positive, 45° Exact Angle Cutting Length 4" H = 2" d = 1.25" with 6 Pockets
• 3" Shell Mill Cutter, Positive, 45° Exact Angle Cutting Length 3" H = 2" d = 1" with 6 Pockets
• 2.5" Shell Mill Cutter, Positive, 90° Exact Angle Cutting Length 2.5" H = 2" d = 1" with 5 Pockets
• 2" Shell Mill Cutter, Positive, 45° Exact Angle Cutting Length 2" H = 1.750" d = 0.75" with 4 Pockets
• 5" Shell Mill Cutter, Positive, 45° Exact Angle Cutting Length 5" H = 2.5" d = 1.5" with 10 Pockets
• 4" Shell Mill Cutter, Positive, 45° Exact Angle Cutting Length 4" H = 2" d = 1.25" with 8 Pockets
• 3" Shell Mill Cutter, Positive, 45° Exact Angle Cutting Length 3" H = 2" d = 1" with 7 Pockets
• 2.5" Shell Mill Cutter, Positive, 45° Exact Angle Cutting Length 2.5" H = 2" d = 1" with 6 Pockets
• 2" Shell Mill Cutter, Positive, 45° Exact Angle Cutting Length 2" H = 1.750" d = 0.75" with 4 Pockets
• 6" Shell Mill Cutter, Positive, 90° Exact Angle Cutting Length 6" H = 2" d = 1.5" with 9 Pockets
• 5" Shell Mill Cutter, Positive, 90° Exact Angle Cutting Length 5" H = 2" d = 1.5" with 8 Pockets
• 4" Shell Mill Cutter, Positive, 90° Exact Angle Cutting Length 4" H = 2" d = 1.25" with 8 Pockets
• 3" Shell Mill Cutter, Positive, 90° Exact Angle Cutting Length 3" H = 2" d = 1" with 7 Pockets
• 2.5" Shell Mill Cutter, Positive, 90° Exact Angle Cutting Length 2.5" H = 2" d = 1" with 6 Pockets
• 2" Shell Mill Cutter, Positive, 90° Exact Angle Cutting Length 2" H = 1.750" d = 0.5" with 5 Pockets
• 1.5" Shell Mill Cutter, Positive, 90° Exact Angle Cutting Length 1.5" H = 1.750" d = 0.5" with 4 Pockets
• 1.25" Endmill Cutter, Positive, 90° Exact Angle Cutting Length 1.25" OAL 10" with 3 Pockets
• 1" Endmill Cutter, Positive, 90° Exact Angle Cutting Length 1.250" OAL 8" with 2 Pockets
• 1.250" Endmill Cutter, Positive, 90° Exact Angle Cutting Length 1.250" OAL 3.750" with 3 Pockets
• 1" Endmill Cutter, Positive, 90° Exact Angle Cutting Length 1.25" OAL 3.5" with 2 Pockets
• 2" Shell Mill Cutter, Positive, 90° Exact Angle Cutting Length 2" H = 1.75" d = 0.750" with 7 Pockets
• 1.5" Shell Mill Cutter, Positive, 90° Exact Angle Cutting Length 1.5", H = 1.75", d = 0.50" with 6 Pockets
• 1" Endmill Cutter, Positive, 90° Exact Angle Cutting Length 1.25" OAL 8" with 4 Pockets
• 3/4"" Endmill Cutter, Positive, 90° Exact Angle Cutting Length 1.25" OAL 8" with 3 Pockets
• 0.625" Endmill Cutter, Positive, 90° Exact Angle Cutting Length 1" OAL 6" with 2 Pockets
• 1" Endmill Cutter, Positive, 90° Exact Angle Cutting Length 1.250" OAL 3.5" with 4 Pockets
• 0.750" Endmill Cutter, Positive, 90° Exact Angle Cutting Length 1.250" OAL 3.500" with 3 Pockets
• 0.625" Endmill Cutter, Positive, 90° Exact Angle Cutting Length 1" OAL 3.250" with 2 Pockets
• 3" Shell Mill Cutter, Positive, 90° Exact Angle Cutting Length 3" H = 2" d =1.00" with 7 Pockets
• 2.5" Shell Mill Cutter, Positive, 90° Exact Angle Cutting Length 2.5" H = 2" d =1.00 with 6 Pockets
• 2" Shell Mill Cutter, Positive, 90° Exact Angle Cutting Length 2" H = 1.75" d = 0.75" with 4 Pockets
• 1.5" Shell Mill Cutter, Positive, 90° Exact Angle Cutting Length 1.5" H = 1.75" d = 0.50" with 3 Pockets
• 1.25" Endmill Cutter, Positive, 90° Exact Angle Cutting Length 1.25" OAL 3.75" with 3 Pockets
• 1" Endmill Cutter, Positive, 90° Exact Angle Cutting Length 1.25" OAL 3.5" with 2 Pockets
• 1" Endmill Cutter, Positive, 90° Exact Angle Cutting Length 1.25" OAL 3.5" with 3 Pockets
• 3/4" Endmill Cutter, Positive, 90° Exact Angle, Cutting Length 1.25" - OAL 3.5" with 2 Pockets
• VCMT 332 CHIP BREAKER GRADE TN35 / VCMT 160408 TN35
• VCMT 331 CHIP BREAKER GRADE TN35 / VCMT 160404 TN35
• VCMT 331 CHIP BREAKER GRADE TN15 / VCMT 160404 TN15
• TCMT 32.52 CHIP BREAKER GRADE TN35 / TCMT 16T308 TN35
• TCMT 32.52 CHIP BREAKER GRADE TN30 / TCMT 16T308 TN30
• TCMT 32.52 CHIP BREAKER GRADE TN15 / TCMT 16T308 TN15
• TCMT 32.51 CHIP BREAKER GRADE TN35 / TCMT 16T304 TN35
• TCMT 32.51 CHIP BREAKER GRADE TN30 / TCMT 16T304 TN30
• TCMT 32.51 CHIP BREAKER GRADE TN15 / TCMT 16T304 TN15
• TCMT 21.51 CHIP BREAKER GRADE TN35 / TCMT 110204 TN35
• TCMT 21.51 CHIP BREAKER GRADE TN15 / TCMT 110204 TN15
• TCMT 090204 CHIP BREAKER GRADE TN15 / TCMT 1.81.51 TN15
• SCMT 432 CHIP BREAKER GRADE TN15 / SCMT 120408 TN15
• SCMT 32.52 CHIP BREAKER GRADE TN15 / SCMT 09T308 TN15
• SCMT 32.51 CHIP BREAKER GRADE TN15 / SCMT 09T304 TN15
• DCMT 32.52 CHIP BREAKER GRADE TN35 / DCMT 11T308 TN35
• DCMT 32.52 CHIP BREAKER GRADE TN30 / DCMT 11T308 TN30
• DCMT 32.52 CHIP BREAKER GRADE TN15 / DCMT 11T308 TN15
• DCMT 32.51 CHIP BREAKER GRADE TN35 / DCMT 11T304 TN35
• DCMT 32.51 CHIP BREAKER GRADE TN30 / DCMT 11T304 TN30
• DCMT 32.51 CHIP BREAKER GRADE TN15 / DCMT 11T304 TN15
• DCMT 21.51 CHIP BREAKER GRADE TN35 / DCMT 070204 TN35
• DCMT 21.51 CHIP BREAKER GRADE TN30 / DCMT 070204 TN30
• DCMT 21.51 CHIP BREAKER GRADE TN15 / DCMT 070204 TN15
• CCMT 432 CHIP BREAKER GRADE TN30 / CCMT 120408 TN30
• CCMT 432 CHIP BREAKER GRADE TN15 / CCMT 120408 TN15
• CCMT 32.52 CHIP BREAKER GRADE TN35 / CCMT 09T308 TN35
• CCMT 32.52 CHIP BREAKER GRADE TN30 / CCMT 09T308 TN30
• CCMT 32.52 CHIP BREAKER GRADE TN15 / CCMT 09T308 TN15
• CCMT 32.51 CHIP BREAKER GRADE TN35 / CCMT 09T304 TN35
• CCMT 32.51 CHIP BREAKER GRADE TN30 / CCMT 09T304 TN30
• CCMT 32.51 CHIP BREAKER GRADE TN15 / CCMT 09T304 TN15
• CCMT 21.51 CHIP BREAKER GRADE TN35 / CCMT 060204 TN35
• CCMT 21.51 CHIP BREAKER GRADE TN30 / CCMT 060204 TN30
• CCMT 21.51 CHIP BREAKER GRADE TN15 / CCMT 060204 TN15
• CCMT 21.50 CHIP BREAKER GRADE TN15 / CCMT 060202 TN15
• VCGT 333 CHIP BREAKER AL GRADE KM15 / VCGT 160412 AL KM15
• VCGT 332 CHIP BREAKER AL GRADE KM15 / VCGT 160408 AL KM15
• VCGT 331 CHIP BREAKER AL GRADE KM15 / VCGT 160404 AL KM15
• TCGT 32.52 CHIP BREAKER AL GRADE KM15 / TCGT 16T308 AL KM15
• TCGT 32.51 CHIP BREAKER AL GRADE KM15 / MTCGT 16T304 AL KM15
• TCGT 32.50 CHIP BREAKER AL GRADE KM15 / TCGT 16T302 AL KM15
• TCGT 21.51 CHIP BREAKER AL GRADE KM15 / TCGT 110204 AL KM15
• TCGT 21.50 CHIP BREAKER AL GRADE KM15 / TCGT 110202 AL KM15
• SCGT 432 CHIP BREAKER AL GRADE KM15 / SCGT 120408 AL KM15
• SCGT 32.52 CHIP BREAKER AL GRADE KM15 / SCGT 09T308 AL KM15
• SCGT 32.51 CHIP BREAKER AL GRADE KM15 / SCGT 09T304 AL KM15
• DCGT 32.52 CHIP BREAKER AL GRADE KM15 / DCGT 11T308 AL KM15
• DCGT 32.51 CHIP BREAKER AL GRADE KM15 / DCGT 11T304 AL KM15
• DCGT 32.50 CHIP BREAKER AL GRADE KM15 / DCGT 11T302 AL KM15
• DCGT 21.51 CHIP BREAKER AL GRADE KM15 / DCGT 070204 AL KM15
• DCGT 21.50 CHIP BREAKER AL GRADE KM15 / DCGT 070202 AL KM15
• CCGT 432 CHIP BREAKER AL GRADE KM15 / CCGT 120408 AL KM15
• CCGT 431 CHIP BREAKER AL GRADE KM15 / CCGT 120404 AL KM15
• CCGT 430 CHIP BREAKER AL GRADE KM15 / CCGT 120400 AL KM15
• CCGT 32.52 CHIP BREAKER AL GRADE KM15 / CCGT 09T308 AL KM15
• CCGT 32.51 CHIP BREAKER AL GRADE KM15 / CCGT 09T304 AL KM15
• CCGT 32.50 CHIP BREAKER AL GRADE KM15 / CCGT 09T302 AL KM15
• CCGT 21.51 CHIP BREAKER AL GRADE KM15 / CCGT 060204 AL KM15
• CCGT 21.50 CHIP BREAKER AL GRADE KM15 / CCGT 060202 AL KM15
• WNMG 433 CHIP BREAKER MHC GRADE TN20 / WNMG 080412 MHC TN20
• WNMG 432 CHIP BREAKER MHC GRADE TN30 / WNMG 080408 MHC TN30
• WNMG 432 CHIP BREAKER MHC GRADE TN20 / WNMG 080408 MHC TN20
• WNMG 432 CHIP BREAKER MFC GRADE TN15 / WNMG 080408 MFC TN15
• WNMG 432 CHIP BREAKER MC GRADE TN35 / WNMG 080408 MC TN35
• WNMG 432 CHIP BREAKER MC GRADE TN30 / WNMG 080408 MC TN30
• WNMG 432 CHIP BREAKER MC GRADE TN15 / WNMG 080408 MC TN15
• WNMG 332 CHIP BREAKER MC GRADE TN35 / WNMG 060408 MC TN35
• WNMG 332 CHIP BREAKER MC GRADE TN15 / WNMG 060408 MC TN15
• WNMG 331 CHIP BREAKER MC GRADE TN35 / WNMG 060404 MC TN35
• WNMG 331 CHIP BREAKER MC GRADE TN15 / WNMG 060404 MC TN15
• WNMG 431 CHIP BREAKER FMC GRADE TN15 / WNMG 080404 FMC TN15
• WNMG 431 CHIP BREAKER FC GRADE TN30 / WNMG 080404 FC TN30
• WNMG 431 CHIP BREAKER FC GRADE TN15 / WNMG 080404 FC TN15
• TNMG 333 CHIP BREAKER MHC GRADE TN30 / TNMG 160412 MHC TN30
• TNMG 332 CHIP BREAKER MHC GRADE TN30 / TNMG 160408 MHC TN30
• TNMG 332 CHIP BREAKER MHC GRADE TN20 / TNMG 160408 MHC TN20
• TNMG 332 CHIP BREAKER MFC GRADE TN30 / TNMG 160408 MFC TN30
• TNMG 332 CHIP BREAKER MFC GRADE TN15 / TNMG 160408 MFC TN15
• TNMG 332 CHIP BREAKER MC GRADE TN35 / TNMG 160408 MC TN35
• TNMG 332 CHIP BREAKER MC GRADE TN30 / TNMG 160408 MC TN30
• TNMG 332 CHIP BREAKER MC GRADE TN15 / TNMG 160408 MC TN15
• TNMG 331 CHIP BREAKER FMC GRADE TN15 / TNMG 160404 FMC TN15
• TNMG 331 CHIP BREAKER FC GRADE TN30 / TNMG 160404 FC TN30
• TNMG 331 CHIP BREAKER FC GRADE TN15 / TNMG 160404 FC TN15
• SNMG 433 CHIP BREAKER RC GRADE TN30 / SNMG 120412 RC TN30
• SNMG 431 CHIP BREAKER FMC GRADE TN15 / SNMG 120404 FMC TN15
• DNMG 432 CHIP BREAKER MHC GRADE TN30 / DNMG 150408 MHC TN30
• DNMG 432 CHIP BREAKER MHC GRADE TN20 / DNMG 150408 MHC TN20
• DNMG 432 CHIP BREAKER MC GRADE TN35 / DNMG 150408 MC TN35
• DNMG 432 CHIP BREAKER MC GRADE TN30 / DNMG 150408 MC TN30
• DNMG 432 CHIP BREAKER MC GRADE TN15 / DNMG 150408 MC TN15
• DNMG 431 CHIP BREAKER FC GRADE TN15 / DNMG 150404 FC TN15
• CNMG 433 CHIP BREAKER RC GRADE TN30 / CNMG 120412 RC TN30
• CNMG 433 CHIP BREAKER RC GRADE TN15 / CNMG 120412 RC TN15
• CNMG 432 CHIP BREAKER RC GRADE TN30 / CNMG 120408 RC TN30
• CNMG 432 CHIP BREAKER RC GRADE TN15 / CNMG 120408 RC TN15
• CNMG 433 CHIP BREAKER MHC GRADE TN20 / CNMG 120412 MHC TN20
• CNMG 432 CHIP BREAKER MHC GRADE TN30 / CNMG 120408 MHC TN30
• CNMG 432 CHIP BREAKER MHC GRADE TN15 / CNMG 120408 MHC TN15
• CNMG 432 CHIP BREAKER MFC GRADE TN30 / CNMG 120408 MFC TN30
• CNMG 432 CHIP BREAKER MFC GRADE TN15 / CNMG 120408 MFC TN15
• CNMG 432 CHIP BREAKER MC GRADE TN35 / CNMG 120408 MC TN35
• CNMG 432 CHIP BREAKER MC GRADE TN30 / CNMG 120408 MC TN30
• CNMG 432 CHIP BREAKER MC GRADE TN15 / CNMG 120408 MC TN15
• CNMG 431 CHIP BREAKER FMC GRADE TN15 / CNMG 120404 FMC TN15
• CNMG 431 CHIP BREAKER FC GRADE TN30 / CNMG 120404 FC TN30
• CNMG 431 CHIP BREAKER FC GRADE TN15 / CNMG 120404 FC TN15
• CNMG 322 CHIP BREAKER FC GRADE TN15 / CNMG 090308 FC TN15
• CNMG 321 CHIP BREAKER FC GRADE TN15 / CNMG 090304 FC TN 15
• STVOR 24-66E Tool Holder O.D. Threading & Shallow Grooving for Triangle TNMC Inserts
• STVOL 20-64D Tool Holder O.D. Threading & Shallow Grooving for Triangle TNMC Inserts
• STVOR 20-64D Tool Holder O.D. Threading & Shallow Grooving for Triangle TNMC Inserts
• STVOL 20-66D Tool Holder O.D. Threading & Shallow Grooving for Triangle TNMC Inserts
• STVOL 24-66E Tool Holder O.D. Threading & Shallow Grooving for Triangle TNMC Inserts
• STVOR 20-66D Tool Holder O.D. Threading & Shallow Grooving for Triangle TNMC Inserts
• STVOR 20-4D Tool Holder O.D. Threading & Shallow Grooving for Triangle TNMC Inserts
• STVOL 24-4E Tool Holder O.D. Threading & Shallow Grooving for Triangle TNMC Inserts
• STVOR 20-5D Tool Holder O.D. Threading & Shallow Grooving for Triangle TNMC Inserts
• STVOR 16-4D Tool Holder O.D. Threading & Shallow Grooving for Triangle TNMC Inserts
• STVOR 16-5D Tool Holder O.D. Threading & Shallow Grooving for Triangle TNMC Inserts
• STVOL 16-4D Tool Holder O.D. Threading & Shallow Grooving for Triangle TNMC Inserts
• STVOL 20-5D Tool Holder O.D. Threading & Shallow Grooving for Triangle TNMC Inserts
• STVOL 20-4D Tool Holder O.D. Threading & Shallow Grooving for Triangle TNMC Inserts
• STVOR 24-4E Tool Holder O.D. Threading & Shallow Grooving for Triangle TNMC Inserts
• STVOL 16-5D Tool Holder O.D. Threading & Shallow Grooving for Triangle TNMC Inserts
• STVOR 12-4B Tool Holder O.D. Threading & Shallow Grooving for Triangle TNMC Inserts
• STVOL 12-3B Tool Holder O.D. Threading & Shallow Grooving for Triangle TNMC Inserts
• STVOR 08-3A Tool Holder O.D. Threading & Shallow Grooving for Triangle TNMC Inserts
• STVOL 16-3D Tool Holder O.D. Threading & Shallow Grooving for Triangle TNMC Inserts
• STVOR 10-3B Tool Holder O.D. Threading & Shallow Grooving for Triangle TNMC Inserts
• STVOL 12-4B Tool Holder O.D. Threading & Shallow Grooving for Triangle TNMC Inserts
• STVOR 12-3B Tool Holder O.D. Threading & Shallow Grooving for Triangle TNMC Inserts
• STVOL 08-3A Tool Holder O.D. Threading & Shallow Grooving for Triangle TNMC Inserts
• STVOR 16-3D Tool Holder O.D. Threading & Shallow Grooving for Triangle TNMC Inserts
• STVOL 10-3B Tool Holder O.D. Threading & Shallow Grooving for Triangle TNMC Inserts
• PROON 24-8E Tool Holder Neutral Shank for Profiling RCMM Inserts
• PROON 16-4D Tool Holder Neutral Shank for Profiling RCMM Inserts
• PROON 20-8E Tool Holder Neutral Shank for Profiling RCMM Inserts
• PROON 20-4E Tool Holder Neutral Shank for Profiling RCMM Inserts
• PROON 24-6E Tool Holder Neutral Shank for Profiling RCMM Inserts
• PROON 85-4D Tool Holder Neutral Shank for Profiling RCMM Inserts
• PROON 20-6E Tool Holder Neutral Shank for Profiling RCMM Inserts
• MTLNL 16-4D Tool Holder -5 DEGREE Side Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTLNR 24-5D Tool Holder -5 DEGREE Side Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTLNL 24-5D Tool Holder -5 DEGREE Side Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTLNR 20-4D Tool Holder -5 DEGREE Side Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTLNR 16-4D Tool Holder -5 DEGREE Side Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTLNL 20-4D Tool Holder -5 DEGREE Side Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTHOR 16-5D Tool Holder Gang Tool Holder for Shallow Grooving or I.D. Threading for Triangle TNMA_Inserts
• MTHOL 16-5D Tool Holder Gang Tool Holder for Shallow Grooving or I.D. Threading for Triangle TNMA_Inserts
• MTHOL 20-5D Tool Holder Gang Tool Holder for Shallow Grooving or I.D. Threading for Triangle TNMA_Inserts
• MTHOR 20-5D Tool Holder Gang Tool Holder for Shallow Grooving or I.D. Threading for Triangle TNMA_Inserts
• MTHOR 20-4D Tool Holder Gang Tool Holder for Shallow Grooving or I.D. Threading for Triangle TNMA_Inserts
• MTHOR 12-3B Tool Holder Gang Tool Holder for Shallow Grooving or I.D. Threading for Triangle TNMA_Inserts
• MTHOL 12-4B Tool Holder Gang Tool Holder for Shallow Grooving or I.D. Threading for Triangle TNMA_Inserts
• MTHOR 16-4D Tool Holder Gang Tool Holder for Shallow Grooving or I.D. Threading for Triangle TNMA_Inserts
• MTHOR 10-3B Tool Holder Gang Tool Holder for Shallow Grooving or I.D. Threading for Triangle TNMA_Inserts
• MTHOL 16-4D Tool Holder Gang Tool Holder for Shallow Grooving or I.D. Threading for Triangle TNMA_Inserts
• MTHOL 10-3B Tool Holder Gang Tool Holder for Shallow Grooving or I.D. Threading for Triangle TNMA_Inserts
• MTHOR 12-4B Tool Holder Gang Tool Holder for Shallow Grooving or I.D. Threading for Triangle TNMA_Inserts
• MTHOL 12-3B Tool Holder Gang Tool Holder for Shallow Grooving or I.D. Threading for Triangle TNMA_Inserts
• MTHOL 20-4D Tool Holder Gang Tool Holder for Shallow Grooving or I.D. Threading for Triangle TNMA_Inserts
• MWLNR 24-5E Tool Holder -5 DEGREE End Cutting Edge Angle for Negative 80 DEGREE Trigon WNM_Inserts
• MWLNL 20-5D Tool Holder -5 DEGREE End Cutting Edge Angle for Negative 80 DEGREE Trigon WNM_Inserts
• MWLNL 24-4E Tool Holder -5 DEGREE End Cutting Edge Angle for Negative 80 DEGREE Trigon WNM_Inserts
• MWLNL 24-5E Tool Holder -5 DEGREE End Cutting Edge Angle for Negative 80 DEGREE Trigon WNM_Inserts
• MWLNR 16-5D Tool Holder -5 DEGREE End Cutting Edge Angle for Negative 80 DEGREE Trigon WNM_Inserts
• MWLNR 24-4E Tool Holder -5 DEGREE End Cutting Edge Angle for Negative 80 DEGREE Trigon WNM_Inserts
• MWLN R 20-4D Tool Holder 95° End Cutting Edge Angle WNMG43__ Insert
• MWLNL 16-5D Tool Holder -5 DEGREE End Cutting Edge Angle for Negative 80 DEGREE Trigon WNM_Inserts
• MWLN L 20-4D Tool Holder 95° End Cutting Edge Angle WNMG43__ Insert
• MWLNR 20-5D Tool Holder -5 DEGREE End Cutting Edge Angle for Negative 80 DEGREE Trigon WNM_Inserts
• MWLN R 12-3B Tool Holder 95° End Cutting Edge Angle WNMG33__ Insert
• MWLN R 12-4B Tool Holder 95° End Cutting Edge Angle WNMG43__ Insert
• MWLN L 12-3B Tool Holder 95° End Cutting Edge Angle WNMG__33__ Insert
• MWLNL 12-4D Tool Holder -5 DEGREE End Cutting Edge Angle for Negative 80 DEGREE Trigon WNM_Inserts
• MWLN R 16-4D Tool Holder 95° End Cutting Edge Angle WNMG43__ Insert
• MWLN L 16-4D Tool Holder 95° End Cutting Edge Angle WNMG43__ Insert
• MWLN L 12-4B Tool Holder 95° End Cutting Edge Angle WNMG43__ Insert
• MWLNR 12-4D Tool Holder -5 DEGREE End Cutting Edge Angle for Negative 80 DEGREE Trigon WNM_Inserts
• MWLN L 16-3D Tool Holder 95° End Cutting Edge Angle WNMG33__ Insert
• MWLN R 16-3D Tool Holder 95° End Cutting Edge Angle WNMG33__ Insert
• MVVNN 20-4D Tool Holder 17.5 DEGREE End Cutting Edge Angle for Negative 35 DEGREE Diamond VNM_Inserts
• MVVN N 20-3D Tool Holder 72°30' End Cutting Edge Angle VN__33__ Insert
• MVVNN 24-4E Tool Holder 17.5 DEGREE End Cutting Edge Angle for Negative 35 DEGREE Diamond VNM_Inserts
• MVVNN 16-4D Tool Holder 17.5 DEGREE End Cutting Edge Angle for Negative 35 DEGREE Diamond VNM_Inserts
• MVVN N 16-3D Tool Holder 72°30' End Cutting Edge Angle VN__33__ Insert
• MVVNN 85-4D Tool Holder 17.5 DEGREE End Cutting Edge Angle for Negative 35 DEGREE Diamond VNM_Inserts
• MVVNN 24-3E Tool Holder 17.5 DEGREE End Cutting Edge Angle for Negative 35 DEGREE Diamond VNM_Inserts
• MVVN N 12-3B Tool Holder 72°30' End Cutting Edge Angle VN__33__ Insert
• MVTNL 20-4D Tool Holder -27.50 DEGREE End Cutting Edge Angle for Negative 35 DEGREE Diamond VNM_Inserts
• MVTNL 85-4D Tool Holder -27.50 DEGREE End Cutting Edge Angle for Negative 35 DEGREE Diamond VNM_Inserts
• MVTNR 85-4D Tool Holder -27.50 DEGREE End Cutting Edge Angle for Negative 35 DEGREE Diamond VNM_Inserts
• MVTNR 20-4D Tool Holder -27.50 DEGREE End Cutting Edge Angle for Negative 35 DEGREE Diamond VNM_Inserts
• MVTNR 16-3D Tool Holder -27.50 DEGREE End Cutting Edge Angle for Negative 35 DEGREE Diamond VNM_Inserts
• MVTNR 12-3B Tool Holder -27.50 DEGREE End Cutting Edge Angle for Negative 35 DEGREE Diamond VNM_Inserts
• MVTNR 16-4D Tool Holder -27.50 DEGREE End Cutting Edge Angle for Negative 35 DEGREE Diamond VNM_Inserts
• MVTNL 16-3D Tool Holder -27.50 DEGREE End Cutting Edge Angle for Negative 35 DEGREE Diamond VNM_Inserts
• MVTNL 24-3E Tool Holder -27.50 DEGREE End Cutting Edge Angle for Negative 35 DEGREE Diamond VNM_Inserts
• MVTNL 16-4D Tool Holder -27.50 DEGREE End Cutting Edge Angle for Negative 35 DEGREE Diamond VNM_Inserts
• MVTNR 24-3E Tool Holder -27.50 DEGREE End Cutting Edge Angle for Negative 35 DEGREE Diamond VNM_Inserts
• MVTNL 20-3D Tool Holder -27.50 DEGREE End Cutting Edge Angle for Negative 35 DEGREE Diamond VNM_Inserts
• MVTNR 20-3D Tool Holder -27.50 DEGREE End Cutting Edge Angle for Negative 35 DEGREE Diamond VNM_Inserts
• MVTNL 12-3B Tool Holder -27.50 DEGREE End Cutting Edge Angle for Negative 35 DEGREE Diamond VNM_Inserts
• MVLNR 85-4D Tool Holder -5 DEGREE End Cutting Edge Angle for Negative 35 DEGREE Diamond VNM_Inserts
• MVLNL 85-4D Tool Holder -5 DEGREE End Cutting Edge Angle for Negative 35 DEGREE Diamond VNM_Inserts
• MVLNR 24-4D Tool Holder -5 DEGREE End Cutting Edge Angle for Negative 35 DEGREE Diamond VNM_Inserts
• MVLNL 24-4D Tool Holder -5 DEGREE End Cutting Edge Angle for Negative 35 DEGREE Diamond VNM_Inserts
• MVLNL 20-4D Tool Holder -5 DEGREE End Cutting Edge Angle for Negative 35 DEGREE Diamond VNM_Inserts
• MVLNL 16-3D Tool Holder -5 DEGREE End Cutting Edge Angle for Negative 35 DEGREE Diamond VNM_Inserts
• MVLNR 20-4D Tool Holder -5 DEGREE End Cutting Edge Angle for Negative 35 DEGREE Diamond VNM_Inserts
• MVLNR 20-3D Tool Holder -5 DEGREE End Cutting Edge Angle for Negative 35 DEGREE Diamond VNM_Inserts
• MVLNR 16-3D Tool Holder -5 DEGREE End Cutting Edge Angle for Negative 35 DEGREE Diamond VNM_Inserts
• MVLNL 20-3D Tool Holder -5 DEGREE End Cutting Edge Angle for Negative 35 DEGREE Diamond VNM_Inserts
• MVLNR 16-4D Tool Holder -5 DEGREE End Cutting Edge Angle for Negative 35 DEGREE Diamond VNM_Inserts
• MVLNL 85-3D Tool Holder -5 DEGREE End Cutting Edge Angle for Negative 35 DEGREE Diamond VNM_Inserts
• MVLNR 85-3D Tool Holder -5 DEGREE End Cutting Edge Angle for Negative 35 DEGREE Diamond VNM_Inserts
• MVLNL 16-4D Tool Holder -5 DEGREE End Cutting Edge Angle for Negative 35 DEGREE Diamond VNM_Inserts
• MVJNL 24-4E Tool Holder -3 DEGREE Side Cutting Edge Angle for Negative 35 DEGREE Diamond VNM_Inserts
• MVJNR 20-4D Tool Holder -3 DEGREE Side Cutting Edge Angle for Negative 35 DEGREE Diamond VNM_Inserts
• MVJNL 85-4D Tool Holder -3 DEGREE Side Cutting Edge Angle for Negative 35 DEGREE Diamond VNM_Inserts
• MVJNR 16-4D Tool Holder -3 DEGREE Side Cutting Edge Angle for Negative 35 DEGREE Diamond VNM_Inserts
• MVJNL 20-4D Tool Holder -3 DEGREE Side Cutting Edge Angle for Negative 35 DEGREE Diamond VNM_Inserts
• MVJNL 16-4D Tool Holder -3 DEGREE Side Cutting Edge Angle for Negative 35 DEGREE Diamond VNM_Inserts
• MVJNR 85-4D Tool Holder -3 DEGREE Side Cutting Edge Angle for Negative 35 DEGREE Diamond VNM_Inserts
• MVJNR 24-4E Tool Holder -3 DEGREE Side Cutting Edge Angle for Negative 35 DEGREE Diamond VNM_Inserts
• MVJNL 12-4B Tool Holder -3 DEGREE Side Cutting Edge Angle for Negative 35 DEGREE Diamond VNM_Inserts
• MVJNR 12-4B Tool Holder -3 DEGREE Side Cutting Edge Angle for Negative 35 DEGREE Diamond VNM_Inserts
• MVJNR 24-3E Tool Holder -3 DEGREE Side Cutting Edge Angle for Negative 35 DEGREE Diamond VNM_Inserts
• MVJN L 16-3D Tool Holder 93° End Cutting Edge Angle VN__33__ Insert
• MVJN L 20-3D Tool Holder 93° End Cutting Edge Angle VN__33__ Insert
• MVJN R 12-3B Tool Holder 93° End Cutting Edge Angle VN__33__ Insert
• MVJN R 16-3D Tool Holder 93° End Cutting Edge Angle VN__33__ Insert
• MVJNL 24-3E Tool Holder -3 DEGREE Side Cutting Edge Angle for Negative 35 DEGREE Diamond VNM_Inserts
• MVJN L 12-3B Tool Holder 93° End Cutting Edge Angle VN__33__ Insert
• MVJN R 20-3D Tool Holder 93° End Cutting Edge Angle VN__33__ Insert
• MTRNR 86-5E Tool Holder 15 DEGREE Side Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTRNR 24-6E Tool Holder 15 DEGREE Side Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTRNL 20-6E Tool Holder 15 DEGREE Side Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTRNR 20-6E Tool Holder 15 DEGREE Side Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTRNL 24-6E Tool Holder 15 DEGREE Side Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTRNR 85-5D Tool Holder 15 DEGREE Side Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTRNL 86-5E Tool Holder 15 DEGREE Side Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTRNL 20-5D Tool Holder 15 DEGREE Side Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTRNR 24-5E Tool Holder 15 DEGREE Side Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTRNL 24-5E Tool Holder 15 DEGREE Side Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTRNR 85-4D Tool Holder 15 DEGREE Side Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTRNL 16-5D Tool Holder 15 DEGREE Side Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTRNL 85-4D Tool Holder 15 DEGREE Side Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTRNR 20-5D Tool Holder 15 DEGREE Side Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTRNL 85-5D Tool Holder 15 DEGREE Side Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTRNR 16-5D Tool Holder 15 DEGREE Side Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTRNR 16-3D Tool Holder 15 DEGREE Side Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTRNR 20-4D Tool Holder 15 DEGREE Side Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTRNL 16-3D Tool Holder 15 DEGREE Side Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTRNL 20-4D Tool Holder 15 DEGREE Side Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTRNL 16-4D Tool Holder 15 DEGREE Side Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTRNR 10-3B Tool Holder 15 DEGREE Side Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTRNR 16-4D Tool Holder 15 DEGREE Side Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTRNL 10-3B Tool Holder 15 DEGREE Side Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTRNL 12-3B Tool Holder 15 DEGREE Side Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTRNR 12-3B Tool Holder 15 DEGREE Side Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTRNR 10-2B Tool Holder 15 DEGREE Side Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTRNL 10-2B Tool Holder 15 DEGREE Side Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTRNL 08-2A Tool Holder 15 DEGREE Side Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTRNR 08-2A Tool Holder 15 DEGREE Side Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTJNR 24-6E Tool Holder 3 Side Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTJNL 24-6E Tool Holder 3 Side Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTJNR 20-6D Tool Holder 3 Side Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTJNL 86-5E Tool Holder 3 Side Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTJNR 85-5D Tool Holder 3 Side Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTJNL 20-6D Tool Holder 3 Side Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTJNL 85-5D Tool Holder 3 Side Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTJNR 86-5E Tool Holder 3 Side Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTJNR 24-5E Tool Holder 3 Side Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTJNR 20-5D Tool Holder 3 Side Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTJNL 24-5E Tool Holder 3 Side Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTJNL 20-5D Tool Holder 3 Side Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTJNR 16-3D Tool Holder 3 Side Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTJNL 16-5D Tool Holder 3 Side Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTJNL 85-4D Tool Holder 3 Side Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTJNR 12-3B Tool Holder 3 Side Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTJNL 12-3B Tool Holder 3 Side Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTJNR 16-5D Tool Holder 3 Side Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTJNL 16-3D Tool Holder 3 Side Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTJNR 20-4D Tool Holder 3 Side Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTJNR 85-4D Tool Holder 3 Side Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTJNR 08-2A Tool Holder 3 Side Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTJNL 16-4D Tool Holder 3 Side Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTJNL 20-4D Tool Holder 3 Side Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTJNL 10-2B Tool Holder 3 Side Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTJNR 16-4D Tool Holder 3 Side Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTJNL 10-3B Tool Holder 3 Side Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTJNR 10-3B Tool Holder 3 Side Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTJNR 10-2B Tool Holder 3 Side Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTJNL 08-2A Tool Holder 3 Side Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTGNR 24-6E Tool Holder 0 Side Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTGNR 86-5E Tool Holder 0 Side Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTGNR 85-5D Tool Holder 0 Side Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTGNL 24-6E Tool Holder 0 Side Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTGNL 86-5E Tool Holder 0 Side Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTGNR 24-5E Tool Holder 0 Side Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTGNL 85-5D Tool Holder 0 Side Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTGNR 24-4D Tool Holder 0 Side Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTGNL 24-5E Tool Holder 0 Side Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTGNR 20-5D Tool Holder 0 Side Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTGNL 20-5D Tool Holder 0 Side Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTGNR 86-4E Tool Holder 0 Side Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTGNR 16-5D Tool Holder 0 Side Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTGNL 86-4E Tool Holder 0 Side Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTGNL 85-4D Tool Holder 0 Side Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTGNL 16-5D Tool Holder 0 Side Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTGNR 85-4D Tool Holder 0 Side Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTGNL 12-4D Tool Holder 0 Side Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTGNR 12-4D Tool Holder 0 Side Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTGN L 16-4D Tool Holder 90° End Cutting Edge Angle TNM__43__ Insert
• MTGNL 24-4D Tool Holder 0 Side Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTGN R 16-4D Tool Holder 90° End Cutting Edge Angle TNM__43__ Insert
• MTGN L 20-4D Tool Holder 90° End Cutting Edge Angle TNM__43__ Insert
• MTGN R 16-3D Tool Holder 90° End Cutting Edge Angle TNM__33__ Insert
• MTGN L 16-3D Tool Holder 90° End Cutting Edge Angle TNM__33__ Insert
• MTGN R 20-4D Tool Holder 90° End Cutting Edge Angle TNM__43__ Insert
• MTGN R 12-3B Tool Holder 90° End Cutting Edge Angle TNM__33__ Insert
• MTGNR 12-2B Tool Holder 0 Side Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTGNR 10-3B Tool Holder 0 Side Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTGNR 08-2A Tool Holder 0 Side Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTGNL 08-2A Tool Holder 0 Side Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTGN L 12-3B Tool Holder 90° End Cutting Edge Angle TNM__43__ Insert
• MTGNR 10-2B Tool Holder 0 Side Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTGNL 10-2B Tool Holder 0 Side Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTGNL 12-2B Tool Holder 0 Side Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTGNL 10-3B Tool Holder 0 Side Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTFNL 24-6E Tool Holder 0 End Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTFNR 24-5E Tool Holder 0 End Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTFNL 85-5D Tool Holder 0 End Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTFNR 85-5D Tool Holder 0 End Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTFNR 86-5E Tool Holder 0 End Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTFNL 24-5E Tool Holder 0 End Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTFNL 86-5E Tool Holder 0 End Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTFNR 24-6E Tool Holder 0 End Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTFNL 20-5D Tool Holder 0 End Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTFNL 86-4E Tool Holder 0 End Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTFNR 16-5D Tool Holder 0 End Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTFNR 20-5D Tool Holder 0 End Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTFNR 85-4D Tool Holder 0 End Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTFNL 85-4D Tool Holder 0 End Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTFNR 86-4E Tool Holder 0 End Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTFNL 16-5D Tool Holder 0 End Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTFNR 24-4D Tool Holder 0 End Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTFNR 12-3B Tool Holder 0 End Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTFNL 24-4D Tool Holder 0 End Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTFNR 12-2B Tool Holder 0 End Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTFNR 16-4D Tool Holder 0 End Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTFNR 10-3B Tool Holder 0 End Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTFNL 20-4D Tool Holder 0 End Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTFNL 12-3B Tool Holder 0 End Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTFNL 10-3B Tool Holder 0 End Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTFNL 16-4D Tool Holder 0 End Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTFNR 20-4D Tool Holder 0 End Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTFNR 10-2B Tool Holder 0 End Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTFNL 16-3D Tool Holder 0 End Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTFNR 16-3D Tool Holder 0 End Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTFNL 12-2B Tool Holder 0 End Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTFNL 10-2B Tool Holder 0 End Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTFNR 08-2A Tool Holder 0 End Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTFNL 08-2A Tool Holder 0 End Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTENN 86-4E Tool Holder 30 Degree Side Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTENN 16-4D Tool Holder 30 Degree Side Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTENN 24-6E Tool Holder 30 Degree Side Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTENN 12-4B Tool Holder 30 Degree Side Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTENN 85-4D Tool Holder 30 Side Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTENN 24-5E Tool Holder 30 Degree Side Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTENN 86-5E Tool Holder 30 Degree  Side Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTENN 20-4D Tool Holder 30 Degree Side Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTENN 64-3D Tool Holder 30 Side Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTENN 20-5D Tool Holder 30 Degree Side Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTENN 16-5D Tool Holder 30 Degree Side Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTENN 16-3D Tool Holder 30 Degree Side Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTENN 12-3B Tool Holder 30 Degree Side Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTENN 08-2A Tool Holder 30 Degree Side Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTENN 10-3B Tool Holder 30 Degree Side Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTCNN 66-4F Tool Holder 0 Degree End Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTCNN 66-4E Tool Holder 0 Degree End Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTCNN 44-3F Tool Holder 0 Degree End Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTCNN 08-3A Tool Holder 0° End Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTCNN 12-4B Tool Holder 0 Degree End Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTCNN 64-4D Tool Holder 0 Degree End Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTCNN 44-3D Tool Holder 0 Degree End Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTCNN 08-3B Tool Holder 0 Degree End Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTCNN 64-4F Tool Holder 0 Degree End Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTANL 20-6E Tool Holder 0 Side Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTANL 24-6E Tool Holder 0 Side Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTANR 24-6E Tool Holder 0 Side Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTANR 20-5D Tool Holder 0 Side Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTANL 20-5D Tool Holder 0 Side Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTANR 20-6E Tool Holder 0 Side Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTANR 16-5D Tool Holder 0 Side Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTANL 16-5D Tool Holder 0 Side Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTANR 86-4E Tool Holder 0 Side Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTANR 85-4D Tool Holder 0 Side Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTANL 20-4D Tool Holder 0 Side Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTANL 85-4D Tool Holder 0 Side Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTANL 86-4E Tool Holder 0 Side Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTANR 64-3D Tool Holder 0 Side Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTANL 16-4D Tool Holder 0 Side Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTANL 64-3D Tool Holder 0 Side Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTANR 16-4D Tool Holder 0 Side Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTANR 20-4D Tool Holder 0 Side Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTANL 10-3B Tool Holder 0 Side Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTANL 10-2B Tool Holder 0 Side Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTANR 10-3B Tool Holder 0 Side Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTANL 08-2A Tool Holder 0 Side Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTANR 12-3B Tool Holder 0 Side Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTANR 08-2A Tool Holder 0 Side Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTANL 12-3B Tool Holder 0 Side Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTANR 10-2B Tool Holder 0 Side Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTANL 16-3D Tool Holder 0 Side Cutting Edge Angle for Negative Triangle TNM_Inserts
• MTANR 16-3D Tool Holder 0 Side Cutting Edge Angle for Negative Triangle TNM_Inserts
• MSSNL 24-6E Tool Holder 45 Side Cutting Edge Angle for Negative Square SNM_Inserts
• MSSNL 86-6E Tool Holder 45 Side Cutting Edge Angle for Negative Square SNM_Inserts
• MSSNR 24-8ETool Holder 45 Side Cutting Edge Angle for Negative Square SNM_Inserts
• MSSNR 86-6ETool Holder 45 Side Cutting Edge Angle for Negative Square SNM_Inserts
• MSSNL 24-8E Tool Holder 45 Side Cutting Edge Angle for Negative Square SNM_Inserts
• MSSNR 24-6ETool Holder 45 Side Cutting Edge Angle for Negative Square SNM_Inserts
• MSSNR 20-6DTool Holder 45 Side Cutting Edge Angle for Negative Square SNM_Inserts
• MSSNR 85-5DTool Holder 45 Side Cutting Edge Angle for Negative Square SNM_Inserts
• MSSNR 85-4DTool Holder 45 Side Cutting Edge Angle for Negative Square SNM_Inserts
• MSSNL 20-5D Tool Holder 45 Side Cutting Edge Angle for Negative Square SNM_Inserts
• MSSNL 20-6D Tool Holder 45 Side Cutting Edge Angle for Negative Square SNM_Inserts
• MSSNR 20-5DTool Holder 45 Side Cutting Edge Angle for Negative Square SNM_Inserts
• MSSNL 16-5D Tool Holder 45 Side Cutting Edge Angle for Negative Square SNM_Inserts
• MSSNR 16-5DTool Holder 45 Side Cutting Edge Angle for Negative Square SNM_Inserts
• MSSNL 85-4D Tool Holder 45 Side Cutting Edge Angle for Negative Square SNM_Inserts
• MSSNL 85-5D Tool Holder 45 Side Cutting Edge Angle for Negative Square SNM_Inserts
• MSSNR 20-4ETool Holder 45 Side Cutting Edge Angle for Negative Square SNM_Inserts
• MSSN L 16-4D Tool Holder 45° End Cutting Edge Angle SNM__43__ Insert
• MSSN L 12-4B Tool Holder 45° End Cutting Edge Angle SNM__43__ Insert
• MSSNL 08-3A Tool Holder 45 Side Cutting Edge Angle for Negative Square SNM_Inserts
• MSSN R 12-4B Tool Holder 45° End Cutting Edge Angle SNM__43__ Insert
• MSSN R 16-4D Tool Holder 45° End Cutting Edge Angle SNM__43__ Insert
• MSSNR 08-3BTool Holder 45 Side Cutting Edge Angle for Negative Square SNM_Inserts
• MSSNL 08-3B Tool Holder 45 Side Cutting Edge Angle for Negative Square SNM_Inserts
• MSSNR 08-3ATool Holder 45 Side Cutting Edge Angle for Negative Square SNM_Inserts
• MSSNL 20-4E Tool Holder 45 Side Cutting Edge Angle for Negative Square SNM_Inserts
• MSRNL 32-8E Tool Holder 15 Side Cutting Edge Angle for Negative Square SNM_Inserts
• MSRNL 24-8E Tool Holder 15 Side Cutting Edge Angle for Negative Square SNM_Inserts
• MSRNR 24-8E Tool Holder 15 Side Cutting Edge Angle for Negative Square SNM_Inserts
• MSRNR 32-8E Tool Holder 15 Side Cutting Edge Angle for Negative Square SNM_Inserts
• MSRNR 20-6D Tool Holder 15 Side Cutting Edge Angle for Negative Square SNM_Inserts
• MSRNR 16-6D Tool Holder 15 Side Cutting Edge Angle for Negative Square SNM_Inserts
• MSRNR 24-6E Tool Holder 15 Side Cutting Edge Angle for Negative Square SNM_Inserts
• MSRNR 85-5D Tool Holder 15 Side Cutting Edge Angle for Negative Square SNM_Inserts
• MSRNL 20-6D Tool Holder 15 Side Cutting Edge Angle for Negative Square SNM_Inserts
• MSRNR 85-6D Tool Holder 15 Side Cutting Edge Angle for Negative Square SNM_Inserts
• MSRNL 16-6D Tool Holder 15 Side Cutting Edge Angle for Negative Square SNM_Inserts
• MSRNL 24-6E Tool Holder 15 Side Cutting Edge Angle for Negative Square SNM_Inserts
• MSRNL 85-6D Tool Holder 15 Side Cutting Edge Angle for Negative Square SNM_Inserts
• MSRNL 85-5D Tool Holder 15 Side Cutting Edge Angle for Negative Square SNM_Inserts
• MSRNR 20-5D Tool Holder 15 Side Cutting Edge Angle for Negative Square SNM_Inserts
• MSRNL 16-5D Tool Holder 15 Side Cutting Edge Angle for Negative Square SNM_Inserts
• MSRNL 85-4D Tool Holder 15 Side Cutting Edge Angle for Negative Square SNM_Inserts
• MSRNR 16-5D Tool Holder 15 Side Cutting Edge Angle for Negative Square SNM_Inserts
• MSRNR 85-4D Tool Holder 15 Side Cutting Edge Angle for Negative Square SNM_Inserts
• MSRNR 20-4D Tool Holder 15 Side Cutting Edge Angle for Negative Square SNM_Inserts
• MSRN R 16-4D Tool Holder 75° End Cutting Edge Angle SNM__43__ Insert
• MSRNL 20-4D Tool Holder 15 Side Cutting Edge Angle for Negative Square SNM_Inserts
• MSRNL 20-5D Tool Holder 15 Side Cutting Edge Angle for Negative Square SNM_Inserts
• MSRN L 16-4D Tool Holder 75° End Cutting Edge Angle SNM__43__ Insert
• MSRN L 12-4B Tool Holder 75° End Cutting Edge Angle SNM__43__ Insert
• MSRNR 12-3B Tool Holder 15 Side Cutting Edge Angle for Negative Square SNM_Inserts
• MSRNL 08-3A Tool Holder 15 Side Cutting Edge Angle for Negative Square SNM_Inserts
• MSRNL 08-3B Tool Holder 15 Side Cutting Edge Angle for Negative Square SNM_Inserts
• MSRNR 08-3A Tool Holder 15 Side Cutting Edge Angle for Negative Square SNM_Inserts
• MSRNL 12-3B Tool Holder 15 Side Cutting Edge Angle for Negative Square SNM_Inserts
• MSRNR 08-3B Tool Holder 15 Side Cutting Edge Angle for Negative Square SNM_Inserts
• MSRNR 10-3B Tool Holder 15 Side Cutting Edge Angle for Negative Square SNM_Inserts
• MSRN R 12-4B Tool Holder 75° End Cutting Edge Angle SNM__43__ Insert
• MSRNL 10-3B Tool Holder 15 Side Cutting Edge Angle for Negative Square SNM_Inserts
• MSKNL 20-5D Tool Holder 15 End Cutting Edge Angle for Negative Square SNM_Inserts
• MSKNL 85-5D Tool Holder 15 End Cutting Edge Angle for Negative Square SNM_Inserts
• MSKNR 20-6D Tool Holder 15 End Cutting Edge Angle for Negative Square SNM_Inserts
• MSKNR 24-8E Tool Holder 15 End Cutting Edge Angle for Negative Square SNM_Inserts
• MSKNR 20-5D Tool Holder 15 End Cutting Edge Angle for Negative Square SNM_Inserts
• MSKNR 85-5D Tool Holder 15 End Cutting Edge Angle for Negative Square SNM_Inserts
• MSKNL 24-8E Tool Holder 15 End Cutting Edge Angle for Negative Square SNM_Inserts
• MSKNL 20-6D Tool Holder 15 End Cutting Edge Angle for Negative Square SNM_Inserts
• MSKNL 24-6E Tool Holder 15 End Cutting Edge Angle for Negative Square SNM_Inserts
• MSKNR 24-6E Tool Holder 15 End Cutting Edge Angle for Negative Square SNM_Inserts
• MSKNR 16-5D Tool Holder 15 End Cutting Edge Angle for Negative Square SNM_Inserts
• MSKNL 12-3B Tool Holder 15 End Cutting Edge Angle for Negative Square SNM_Inserts
• MSKNL 85-4D Tool Holder 15 End Cutting Edge Angle for Negative Square SNM_Inserts
• MSKNR 85-4D Tool Holder 15 End Cutting Edge Angle for Negative Square SNM_Inserts
• MSKN L 20-4B Tool Holder 75° End Cutting Edge Angle SNM__43__ Insert
• MSKN R 12-4B Tool Holder 75° End Cutting Edge Angle SNM__43__ Insert
• MSKNR 20-4E Tool Holder 15 End Cutting Edge Angle for Negative Square SNM_Inserts
• MSKNL 16-5D Tool Holder 15 End Cutting Edge Angle for Negative Square SNM_Inserts
• MSKNR 08-3B Tool Holder 15 End Cutting Edge Angle for Negative Square SNM_Inserts
• MSKNR 12-3B Tool Holder 15 End Cutting Edge Angle for Negative Square SNM_Inserts
• MSKNL 20-4E Tool Holder 15 End Cutting Edge Angle for Negative Square SNM_Inserts
• MSKN R 16-4D Tool Holder 75° End Cutting Edge Angle SNM__43__ Insert
• MSKN L 16-4D Tool Holder 75° End Cutting Edge Angle SNM__43__ Insert
• MSKNR 10-3B Tool Holder 15 End Cutting Edge Angle for Negative Square SNM_Inserts
• MSKNL 10-3B Tool Holder 15 End Cutting Edge Angle for Negative Square SNM_Inserts
• MSKNL 08-3B Tool Holder 15 End Cutting Edge Angle for Negative Square SNM_Inserts
• MSKNL 08-3A Tool Holder 15 End Cutting Edge Angle for Negative Square SNM_Inserts
• MSKNR 08-3A Tool Holder 15 End Cutting Edge Angle for Negative Square SNM_Inserts
• MSDNN 85-6D Tool Holder 45 Side Cutting Edge Angle for Negative Square SNM_Inserts
• MSDNN 16-6D Tool Holder 45 Side Cutting Edge Angle for Negative Square SNM_Inserts
• MSDNN 24-8E Tool Holder 45 Side Cutting Edge Angle for Negative Square SNM_Inserts
• MSDNN 85-5D Tool Holder 45 Side Cutting Edge Angle for Negative Square SNM_Inserts
• MSDNN 24-6E Tool Holder 45 Side Cutting Edge Angle for Negative Square SNM_Inserts
• MSDNN 20-6D Tool Holder 45 Side Cutting Edge Angle for Negative Square SNM_Inserts
• MSDNN 86-5E Tool Holder 45 Side Cutting Edge Angle for Negative Square SNM_Inserts
• MSDNN 86-6E Tool Holder 45 Side Cutting Edge Angle for Negative Square SNM_Inserts
• MSDNN 86-5D Tool Holder 45 Side Cutting Edge Angle for Negative Square SNM_Inserts
• MSDNN 20-5D Tool Holder 45 Side Cutting Edge Angle for Negative Square SNM_Inserts
• MSDN N 12-4B Tool Holder 45° End Cutting Edge Angle SNM__32__ Insert
• MSDNN 10-4B Tool Holder 45 Side Cutting Edge Angle for Negative Square SNM_Inserts
• MSDNN 12-3B Tool Holder 45 Side Cutting Edge Angle for Negative Square SNM_Inserts
• MSDNN 08-3B Tool Holder 45 Side Cutting Edge Angle for Negative Square SNM_Inserts
• MSDNN 16-5D Tool Holder 45 Side Cutting Edge Angle for Negative Square SNM_Inserts
• MSDN N 16-4D Tool Holder 45° End Cutting Edge Angle SNM__43__ Insert
• MSDNN 85-4D Tool Holder 45 Side Cutting Edge Angle for Negative Square SNM_Inserts
• MSDNN 08-3A Tool Holder 45 Side Cutting Edge Angle for Negative Square SNM_Inserts
• MSDNN 10-3B Tool Holder 45 Side Cutting Edge Angle for Negative Square SNM_Inserts
• MRGOR 24-6E Tool Holder Profiling Plunging & Turning for Positive Round RCM_Inserts
• MRGOL 24-6E Tool Holder Profiling Plunging & Turning for Positive Round RCM_Inserts
• MRGOR 85-5D Tool Holder Profiling Plunging & Turning for Positive Round RCM_Inserts
• MRGOR 85-4D Tool Holder Profiling Plunging & Turning for Positive Round RCM_Inserts
• MRGOR 24-8E Tool Holder Profiling Plunging & Turning for Positive Round RCM_Inserts
• MRGOR 85-6D Tool Holder Profiling Plunging & Turning for Positive Round RCM_Inserts
• MRGOL 24-8E Tool Holder Profiling Plunging & Turning for Positive Round RCM_Inserts
• MRGOR 20-6E Tool Holder Profiling Plunging & Turning for Positive Round RCM_Inserts
• MRGOL 85-5D Tool Holder Profiling Plunging & Turning for Positive Round RCM_Inserts
• MRGOL 20-6E Tool Holder Profiling Plunging & Turning for Positive Round RCM_Inserts
• MRGOL 85-4D Tool Holder Profiling Plunging & Turning for Positive Round RCM_Inserts
• MRGOR 16-4D Tool Holder Profiling Plunging & Turning for Positive Round RCM_Inserts
• MRGOL 85-6D Tool Holder Profiling Plunging & Turning for Positive Round RCM_Inserts
• MRGOL 16-4D Tool Holder Profiling Plunging & Turning for Positive Round RCM_Inserts
• MDQNR 20-5E Tool Holder 17.5 Side Cutting Edge Angle for Negative 55 Diamond DNM_Inserts
• MDQNL 20-5E Tool Holder 17.5 Side Cutting Edge Angle for Negative 55 Diamond DNM_Inserts
• MDQN R 16-4D Tool Holder 107°30' End Cutting Edge Angle CN__43__ Insert
• MDQNR 24-4D Tool Holder 17.5 Side Cutting Edge Angle for Negative 55 Diamond DNM_Inserts
• MDQN R 20-4D Tool Holder 107°30' End Cutting Edge Angle CN__43__ Insert
• MDQN L 16-4D Tool Holder 107°30' End Cutting Edge Angle CN__43__ Insert
• MDQNR 24-5D Tool Holder 17.5 Side Cutting Edge Angle for Negative 55 Diamond DNM_Inserts
• MDQNL 24-4D Tool Holder 17.5 Side Cutting Edge Angle for Negative 55 Diamond DNM_Inserts
• MDQNL 24-5D Tool Holder 17.5 Side Cutting Edge Angle for Negative 55 Diamond DNM_Inserts
• MDQN L 20-4D Tool Holder 107°30' End Cutting Edge Angle CN__43__ Insert
• MDQN L 12-4B Tool Holder 107°30' End Cutting Edge Angle CN__43__ Insert
• MDQN R 12-4B Tool Holder 107°30' End Cutting Edge Angle CN__43__ Insert
• MCYNN 16-5D Tool Holder 50 Side Cutting Edge Angle for Negative 80 Diamond CNM_Inserts
• MCYNN 16-4D Tool Holder 50 Side Cutting Edge Angle for Negative 80 Diamond CNM_Inserts
• MCYNN 16-6D Tool Holder 50 Side Cutting Edge Angle for Negative 80 Diamond CNM_Inserts
• MCYNN 24-6E Tool Holder 50 Side Cutting Edge Angle for Negative 80 Diamond CNM_Inserts
• MCYNN 12-4B Tool Holder 50 Side Cutting Edge Angle for Negative 80 Diamond CNM_Inserts
• MCYNN 85-4D Tool Holder 50 Side Cutting Edge Angle for Negative 80 Diamond CNM_Inserts
• MCYNN 20-5D Tool Holder 50 Side Cutting Edge Angle for Negative 80 Diamond CNM_Inserts
• MCYNN 20-6D Tool Holder 50 Side Cutting Edge Angle for Negative 80 Diamond CNM_Inserts
• MRGNR 24-8E Tool Holder 0 Side Cutting Edge Angle for Negative Round RNM_Inserts
• MRGNL 24-8E Tool Holder 0 Side Cutting Edge Angle for Negative Round RNM_Inserts
• MRGNR 24-6E Tool Holder 0 Side Cutting Edge Angle for Negative Round RNM_Inserts
• MRGNL 24-6E Tool Holder 0 Side Cutting Edge Angle for Negative Round RNM_Inserts
• MRGNL 20-6D Tool Holder 0 Side Cutting Edge Angle for Negative Round RNM_Inserts
• MRGNR 16-6D Tool Holder 0 Side Cutting Edge Angle for Negative Round RNM_Inserts
• MRGNR 20-6D Tool Holder 0 Side Cutting Edge Angle for Negative Round RNM_Inserts
• MRGNR 85-5D Tool Holder 0 Side Cutting Edge Angle for Negative Round RNM_Inserts
• MRGNL 85-5D Tool Holder 0 Side Cutting Edge Angle for Negative Round RNM_Inserts
• MRGNR 20-5D Tool Holder 0 Side Cutting Edge Angle for Negative Round RNM_Inserts
• MRGNL 16-6D Tool Holder 0 Side Cutting Edge Angle for Negative Round RNM_Inserts
• MRGNL 85-4D Tool Holder 0 Side Cutting Edge Angle for Negative Round RNM_Inserts
• MRGNL 20-5D Tool Holder 0 Side Cutting Edge Angle for Negative Round RNM_Inserts
• MRGNL 24-4E Tool Holder 0 Side Cutting Edge Angle for Negative Round RNM_Inserts
• MRGNR 16-5D Tool Holder 0 Side Cutting Edge Angle for Negative Round RNM_Inserts
• MRGNL 16-5D Tool Holder 0 Side Cutting Edge Angle for Negative Round RNM_Inserts
• MRGNR 24-4E Tool Holder 0 Side Cutting Edge Angle for Negative Round RNM_Inserts
• MRGNL 86-4E Tool Holder 0 Side Cutting Edge Angle for Negative Round RNM_Inserts
• MRGNR 86-4E Tool Holder 0 Side Cutting Edge Angle for Negative Round RNM_Inserts
• MRGNR 10-4B Tool Holder 0 Side Cutting Edge Angle for Negative Round RNM_Inserts
• MRGNR 85-4D Tool Holder 0 Side Cutting Edge Angle for Negative Round RNM_Inserts
• MRGNR 20-4D Tool Holder 0 Side Cutting Edge Angle for Negative Round RNM_Inserts
• MRGNL 10-4B Tool Holder 0 Side Cutting Edge Angle for Negative Round RNM_Inserts
• MRGNR 12-3B Tool Holder 0 Side Cutting Edge Angle for Negative Round RNM_Inserts
• MRGNL 16-3D Tool Holder 0 Side Cutting Edge Angle for Negative Round RNM_Inserts
• MRGNR 16-4D Tool Holder 0 Side Cutting Edge Angle for Negative Round RNM_Inserts
• MRGNL 16-4D Tool Holder 0 Side Cutting Edge Angle for Negative Round RNM_Inserts
• MRGNL 20-4D Tool Holder 0 Side Cutting Edge Angle for Negative Round RNM_Inserts
• MRGNR 16-3D Tool Holder 0 Side Cutting Edge Angle for Negative Round RNM_Inserts
• MRGNR 10-3B Tool Holder 0 Side Cutting Edge Angle for Negative Round RNM_Inserts
• MRGNL 12-3B Tool Holder 0 Side Cutting Edge Angle for Negative Round RNM_Inserts
• MRGNR 12-4B Tool Holder 0 Side Cutting Edge Angle for Negative Round RNM_Inserts
• MRGNL 12-4B Tool Holder 0 Side Cutting Edge Angle for Negative Round RNM_Inserts
• MRGNR 08-3A Tool Holder 0 Side Cutting Edge Angle for Negative Round RNM_Inserts
• MRGNL 10-3B Tool Holder 0 Side Cutting Edge Angle for Negative Round RNM_Inserts
• MRGNL 08-3A Tool Holder 0 Side Cutting Edge Angle for Negative Round RNM_Inserts
• MDGNR 12-4B Tool Holder 0 Side Cutting Edge Angle for Negative 55 Diamond DNM_Inserts
• MDGNR 16-4D Tool Holder 0 Side Cutting Edge Angle for Negative 55 Diamond DNM_Inserts
• MDGNL 12-4B Tool Holder 0 Side Cutting Edge Angle for Negative 55 Diamond DNM_Inserts
• MDGNR 16-5D Tool Holder 0 Side Cutting Edge Angle for Negative 55 Diamond DNM_Inserts
• MDGNL 16-5D Tool Holder 0 Side Cutting Edge Angle for Negative 55 Diamond DNM_Inserts
• MDGNL 16-4D Tool Holder 0 Side Cutting Edge Angle for Negative 55 Diamond DNM_Inserts
• MDPNN 85-4D Tool Holder 27.5 Side Cutting Edge Angle for Negative 55 Diamond DNM_Inserts
• MDPNN 24-5E Tool Holder 27.5 Side Cutting Edge Angle for Negative 55 Diamond DNM_Inserts
• MDPNN 16-5D Tool Holder 27.5 Side Cutting Edge Angle for Negative 55 Diamond DNM_Inserts
• MDPNN 20-5E Tool Holder 27.5 Side Cutting Edge Angle for Negative 55 Diamond DNM_Inserts
• MDPNN 85-5D Tool Holder 27.5 Side Cutting Edge Angle for Negative 55 Diamond DNM_Inserts
• MDPN N 20-4D Tool Holder 62°30' End Cutting Edge Angle CN__43__ Insert
• MDPNN 86-5D Tool Holder 27.5 Side Cutting Edge Angle for Negative 55 Diamond DNM_Inserts
• MDPN N 12-4B Tool Holder 62°30' End Cutting Edge Angle CN__43__ Insert
• MDPN N 16-4D Tool Holder 62°30' End Cutting Edge Angle CN__43__ Insert
• MDJNR 86-5E Tool Holder 3 Side Cutting Edge Angle for Negative 55 Diamond CNM_Inserts
• MDJNL 24-5E Tool Holder 3 Side Cutting Edge Angle for Negative 55 Diamond CNM_Inserts
• MDJNL 85-5D Tool Holder 3 Side Cutting Edge Angle for Negative 55 Diamond CNM_Inserts
• MDJNL 86-5E Tool Holder 3 Side Cutting Edge Angle for Negative 55 Diamond CNM_Inserts
• MDJNR 85-5D Tool Holder 3 Side Cutting Edge Angle for Negative 55 Diamond CNM_Inserts
• MDJNR 20-5D Tool Holder 3 Side Cutting Edge Angle for Negative 55 Diamond CNM_Inserts
• MDJNR 24-5E Tool Holder 3 Side Cutting Edge Angle for Negative 55 Diamond CNM_Inserts
• MDJNL 16-5D Tool Holder 3 Side Cutting Edge Angle for Negative 55 Diamond CNM_Inserts
• MDJNR 16-5D Tool Holder 3 Side Cutting Edge Angle for Negative 55 Diamond CNM_Inserts
• MDJNR 85-4D Tool Holder 3 Side Cutting Edge Angle for Negative 55 Diamond CNM_Inserts
• MDJNL 20-5D Tool Holder 3 Side Cutting Edge Angle for Negative 55 Diamond CNM_Inserts
• MDJNL 85-4D Tool Holder 3 Side Cutting Edge Angle for Negative 55 Diamond CNM_Inserts
• MDJN R 12-4B Tool Holder 93° End Cutting Edge Angle CN__43__ Insert
• MDJN L 12-4B Tool Holder 75° End Cutting Edge Angle CN__43__ Insert
• MDJN R 24-4D Tool Holder 93° End Cutting Edge Angle CN__43__ Insert
• MDJN L 24-4D Tool Holder 75° End Cutting Edge Angle CN__43__ Insert
• MDJN L 20-4D Tool Holder 75° End Cutting Edge Angle CN__43__ Insert
• MDJN R 16-4D Tool Holder 93° End Cutting Edge Angle CN__43__ Insert
• MDJNR 16-3D Tool Holder 3 Side Cutting Edge Angle for Negative 55 Diamond CNM_Inserts
• MDJN R 20-4D Tool Holder 93° End Cutting Edge Angle CN__43__ Insert
• MDJNR 12-3B Tool Holder 3 Side Cutting Edge Angle for Negative 55 Diamond CNM_Inserts
• MDJNL 12-3B Tool Holder 3 Side Cutting Edge Angle for Negative 55 Diamond CNM_Inserts
• MDJN L 16-4D Tool Holder 75° End Cutting Edge Angle CN__43__ Insert
• MDJNR 10-3B Tool Holder 3 Side Cutting Edge Angle for Negative 55 Diamond CNM_Inserts
• MDJNL 10-3B Tool Holder 3 Side Cutting Edge Angle for Negative 55 Diamond CNM_Inserts
• MDJNL 16-3D Tool Holder 3 Side Cutting Edge Angle for Negative 55 Diamond CNM_Inserts
• MDJNL 08-3A Tool Holder 3 Side Cutting Edge Angle for Negative 55 Diamond CNM_Inserts
• MDJNR 08-3A Tool Holder 3 Side Cutting Edge Angle for Negative 55 Diamond CNM_Inserts
• MCRNL 24-6E Tool Holder 15 Side Cutting Edge Angle for Negative 80 Diamond CNM_Inserts
• MCRNL 32-8E Tool Holder 15 Side Cutting Edge Angle for Negative 80 Diamond CNM_Inserts
• MCRNR 86-6E Tool Holder 15 Side Cutting Edge Angle for Negative 80 Diamond CNM_Inserts
• MCRNR 24-6E Tool Holder 15 Side Cutting Edge Angle for Negative 80 Diamond CNM_Inserts
• MCRNR 32-8E Tool Holder 15 Side Cutting Edge Angle for Negative 80 Diamond CNM_Inserts
• MCRNR 24-8E Tool Holder 15 Side Cutting Edge Angle for Negative 80 Diamond CNM_Inserts
• MCRNL 24-8E Tool Holder 15 Side Cutting Edge Angle for Negative 80 Diamond CNM_Inserts
• MCRN L 20-6D Tool Holder 75° End Cutting Edge Angle CN__64__ Insert
• MCRN R 20-6D Tool Holder 75° End Cutting Edge Angle CN__64__ Insert
• MCRNL 86-6E Tool Holder 15 Side Cutting Edge Angle for Negative 80 Diamond CNM_Inserts
• MCRNR 16-6D Tool Holder 15 Side Cutting Edge Angle for Negative 80 Diamond CNM_Inserts
• MCRNL 16-6D Tool Holder 15 Side Cutting Edge Angle for Negative 80 Diamond CNM_Inserts
• MCRNL 24-5E Tool Holder 15 Side Cutting Edge Angle for Negative 80 Diamond CNM_Inserts
• MCRNR 85-5D Tool Holder 15 Side Cutting Edge Angle for Negative 80 Diamond CNM_Inserts
• MCRNL 85-4D Tool Holder 15 Side Cutting Edge Angle for Negative 80 Diamond CNM_Inserts
• MCRNR 24-4E Tool Holder 15 Side Cutting Edge Angle for Negative 80 Diamond CNM_Inserts
• MCRNL 85-5D Tool Holder 15 Side Cutting Edge Angle for Negative 80 Diamond CNM_Inserts
• MCRNL 24-4E Tool Holder 15 Side Cutting Edge Angle for Negative 80 Diamond CNM_Inserts
• MCRNR 24-5E Tool Holder 15 Side Cutting Edge Angle for Negative 80 Diamond CNM_Inserts
• MCRN L 12-4B Tool Holder 75° End Cutting Edge Angle CN__43__ Insert
• MCRN R 20-5D Tool Holder 75° End Cutting Edge Angle CN__54__ Insert
• MCRN L 20-5D Tool Holder 75° End Cutting Edge Angle CN__54__ Insert
• MCRN R 20-4D Tool Holder 75° End Cutting Edge Angle CN__43__ Insert
• MCRN L 16-5D Tool Holder 75° End Cutting Edge Angle CN__54__ Insert
• MCRN R 16-5D Tool Holder 75° End Cutting Edge Angle CN__54__ Insert
• MCRNR 85-4D Tool Holder 15 Side Cutting Edge Angle for Negative 80 Diamond CNM_Inserts
• MCRN L 20-4D Tool Holder 75° End Cutting Edge Angle CN__43__ Insert
• MCRN L 16-4D Tool Holder 75° End Cutting Edge Angle CN__43__ Insert
• MCRN R 12-4B Tool Holder 75° End Cutting Edge Angle CN__43__ Insert
• MCRN R 16-4D Tool Holder 75° End Cutting Edge Angle CN__43__ Insert
• MCRNR 12-3B Tool Holder 15 Side Cutting Edge Angle for Negative 80 Diamond CNM_Inserts
• MCRNL 12-3B Tool Holder 15 Side Cutting Edge Angle for Negative 80 Diamond CNM_Inserts
• MCMNN 20-4D Tool Holder 40 Side Cutting Edge Angle for Negative 80 Diamond CNM_Inserts
• MCMNN 20-6D Tool Holder 40 Side Cutting Edge Angle for Negative 80 Diamond CNM_Inserts
• MCMNN 24-6E Tool Holder 40 Side Cutting Edge Angle for Negative 80 Diamond CNM_Inserts
• MCMNN 16-5D Tool Holder 40 Side Cutting Edge Angle for Negative 80 Diamond CNM_Inserts
• MCMNN 20-5D Tool Holder 40 Side Cutting Edge Angle for Negative 80 Diamond CNM_Inserts
• MCMNN 24-5D Tool Holder 40 Side Cutting Edge Angle for Negative 80 Diamond CNM_Inserts
• MCMNN 16-6D Tool Holder 40 Side Cutting Edge Angle for Negative 80 Diamond CNM_Inserts
• MCMNN 16-4D Tool Holder 40 Side Cutting Edge Angle for Negative 80 Diamond CNM_Inserts
• MCMNN 12-4B Tool Holder 40 Side Cutting Edge Angle for Negative 80 Diamond CNM_Inserts
• MCLNL 10-3A Tool Holder -5 End Cutting Edge Angle for Negative 80 Diamond CNM_ Inserts
• MCLNR 10-3A Tool Holder -5 End Cutting Edge Angle for Negative 80 Diamond CNM_ Inserts
• MCLNL 12-3B Tool Holder -5 End Cutting Edge Angle for Negative 80 Diamond CNM_ Inserts
• MCLNR 08-3A Tool Holder -5 End Cutting Edge Angle for Negative 80 Diamond CNM_ Inserts
• MCLN R 20-6D Tool Holder 95° End Cutting Edge Angle CN__64__ Insert
• MCLNR 85-5D Tool Holder -5 End Cutting Edge Angle for Negative 80 Diamond CNM_ Inserts
• MCLNR 24-4D Tool Holder -5 End Cutting Edge Angle for Negative 80 Diamond CNM_ Inserts
• MCLN L 20-4D Tool Holder 95° End Cutting Edge Angle CN__43__ Insert
• MCLNR 10-4B Tool Holder -5 End Cutting Edge Angle for Negative 80 Diamond CNM_ Inserts
• MCLNL 08-3A Tool Holder -5 End Cutting Edge Angle for Negative 80 Diamond CNM_ Inserts
• MCLNL 10-4B Tool Holder -5 End Cutting Edge Angle for Negative 80 Diamond CNM_ Inserts
• MCLNR 16-3C Tool Holder -5 End Cutting Edge Angle for Negative 80 Diamond CNM_ Inserts
• MCLNR 12-3B Tool Holder -5 End Cutting Edge Angle for Negative 80 Diamond CNM_ Inserts
• MCLNR 24-8E Tool Holder -5 End Cutting Edge Angle for Negative 80 Diamond CNM_ Inserts
• MCLN L 20-6D Tool Holder 95° End Cutting Edge Angle CN__64__ Insert
• MCLNR 86-6E Tool Holder -5 End Cutting Edge Angle for Negative 80 Diamond CNM_ Inserts
• MCLNL 85-6D Tool Holder -5 End Cutting Edge Angle for Negative 80 Diamond CNM_ Inserts
• MCLNR 85-6D Tool Holder -5 End Cutting Edge Angle for Negative 80 Diamond CNM_ Inserts
• MCLNL 24-8E Tool Holder -5 End Cutting Edge Angle for Negative 80 Diamond CNM_ Inserts
• MCLNL 86-6E Tool Holder -5 End Cutting Edge Angle for Negative 80 Diamond CNM_ Inserts
• MCLNL 24-6D Tool Holder -5 End Cutting Edge Angle for Negative 80 Diamond CNM_ Inserts
• MCLNR 85-4D Tool Holder -5 End Cutting Edge Angle for Negative 80 Diamond CNM_ Inserts
• MCLNR 24-6D Tool Holder -5 End Cutting Edge Angle for Negative 80 Diamond CNM_ Inserts
• MCLN R 16-6D Tool Holder 95° End Cutting Edge Angle CN__64__ Insert
• MCLN L 16-6D Tool Holder 95° End Cutting Edge Angle CN__64__ Insert
• MCLNL 85-5D Tool Holder -5 End Cutting Edge Angle for Negative 80 Diamond CNM_ Inserts
• MCLN R 20-5D Tool Holder 95° End Cutting Edge Angle CN__54__ Insert
• MCLN R 16-5D Tool Holder 95° End Cutting Edge Angle CN__54__ Insert
• MCLN L 20-5D Tool Holder 95° End Cutting Edge Angle CN__54__ Insert
• MCLNL 24-4D Tool Holder -5 End Cutting Edge Angle for Negative 80 Diamond CNM_ Inserts
• MCLN L 16-5D Tool Holder 95° End Cutting Edge Angle CN__54__ Insert
• MCLNL 85-4D Tool Holder -5 End Cutting Edge Angle for Negative 80 Diamond CNM_ Inserts
• MCLN R 20-4D Tool Holder 95° End Cutting Edge Angle CN__43__ Insert
• MCLN R 16-4D Tool Holder 95° End Cutting Edge Angle CN__43__ Insert
• MCLN L 16-4D Tool Holder 95° End Cutting Edge Angle CN__43__ Insert
• MCLN R 12-4B Tool Holder 95° End Cutting Edge Angle CN__43__ Insert
• MCLN L 12-4B Tool Holder 95° End Cutting Edge Angle CN__43__ Insert
• MCLNL 16-3C Tool Holder -5 End Cutting Edge Angle for Negative 80 Diamond CNM_ Inserts
• MCKN L 12-4B Tool Holder 75° End Cutting Edge Angle CN__43__ Insert
• MCKN R 20-6D Tool Holder 75° End Cutting Edge Angle CN__64__ Insert
• MCKN R 20-4D Tool Holder 75° End Cutting Edge Angle CN__43__ Insert
• MCKN R 24-6D Tool Holder 75° End Cutting Edge Angle CN__64__ Insert
• MCKN R 16-5D Tool Holder 75° End Cutting Edge Angle CN__54__ Insert
• MCKN L 16-5D Tool Holder 75° End Cutting Edge Angle CN__54__ Insert
• MCKNR 85-4D Tool Holder 15 End Cutting Edge Angle for Negative 80 Diamond CNM_ Inserts
• MCKN R 16-4D Tool Holder 75° End Cutting Edge Angle CN__43__ Insert
• MCKN L 16-4D Tool Holder 75° End Cutting Edge Angle CN__43__ Insert
• MCKNL 85-4D Tool Holder 15 End Cutting Edge Angle for Negative 80 Diamond CNM_ Inserts
• MCKN R 12-4B Tool Holder 75° End Cutting Edge Angle Insert CN__43__
• MCKN L 20-6D Tool Holder 75° End Cutting Edge Angle CN__64__ Insert
• MCKN L 24-6D Tool Holder 75° End Cutting Edge Angle CN__64__ Insert
• MCKN L 16-6D Tool Holder 75° End Cutting Edge Angle CN__64__ Insert
• MCKNR 86-6E Tool Holder 15 End Cutting Edge Angle for Negative 80 Diamond CNM_ Inserts
• MCKNL 86-6E Tool Holder 15 End Cutting Edge Angle for Negative 80 Diamond CNM_ Inserts
• MCKNR 85-5D Tool Holder 15 End Cutting Edge Angle for Negative 80 Diamond CNM_ Inserts
• MCKNR 24-5D Tool Holder 15 End Cutting Edge Angle for Negative 80 Diamond CNM_ Inserts
• MCKN R 16-6D Tool Holder 75° End Cutting Edge Angle CN__64__ Insert
• MCKNL 85-5D Tool Holder 15 End Cutting Edge Angle for Negative 80 Diamond CNM_ Inserts
• MCKNL 24-5D Tool Holder 15 End Cutting Edge Angle for Negative 80 Diamond CNM_ Inserts
• MCKN R 20-5D Tool Holder 75° End Cutting Edge Angle CN__54__ Insert
• MCKN L 20-5D Tool Holder 75° End Cutting Edge Angle CN__54__ Insert
• MCKN L 20-4D Tool Holder 75° End Cutting Edge Angle CN__43__ Insert
• MCGNR 20-6D Tool Holder 0 End Cutting Edge Angle for Negative 80 Diamond CNM_ Inserts
• MCFNR 20-6D Tool Holder 0 End Cutting Edge Angle for Negative 80 Diamond CNM_ Inserts
• MCFNR 20-5D Tool Holder 0 End Cutting Edge Angle for Negative 80 Diamond CNM_ Inserts
• MCFNR 12-4B Tool Holder 0 End Cutting Edge Angle for Negative 80 Diamond CNM_ Inserts
• MCGNL 16-5D Tool Holder 0 End Cutting Edge Angle for Negative 80 Diamond CNM_ Inserts
• MCGNR 16-6D Tool Holder 0 End Cutting Edge Angle for Negative 80 Diamond CNM_ Inserts
• MCGNL 16-6D Tool Holder 0 End Cutting Edge Angle for Negative 80 Diamond CNM_ Inserts
• MCGNR 85-6D Tool Holder 0 End Cutting Edge Angle for Negative 80 Diamond CNM_ Inserts
• MCGNL 85-6D Tool Holder 0 End Cutting Edge Angle for Negative 80 Diamond CNM_ Inserts
• MCGNR 24-6E Tool Holder 0 End Cutting Edge Angle for Negative 80 Diamond CNM_ Inserts
• MCGNL 20-6D Tool Holder 0 End Cutting Edge Angle for Negative 80 Diamond CNM_ Inserts
• MCGNL 24-6E Tool Holder 0 End Cutting Edge Angle for Negative 80 Diamond CNM_ Inserts
• MCGNR 16-5D Tool Holder 0 End Cutting Edge Angle for Negative 80 Diamond CNM_ Inserts
• MCGNL 20-5D Tool Holder 0 End Cutting Edge Angle for Negative 80 Diamond CNM_ Inserts
• MCGNR 20-5D Tool Holder 0 End Cutting Edge Angle for Negative 80 Diamond CNM_ Inserts
• MCGNR 85-4D Tool Holder 0 End Cutting Edge Angle for Negative 80 Diamond CNM_ Inserts
• MCGNL 85-4D Tool Holder 0 End Cutting Edge Angle for Negative 80 Diamond CNM_ Inserts
• MCGNR 20-4D Tool Holder 0 End Cutting Edge Angle for Negative 80 Diamond CNM_ Inserts
• MCGNL 20-4D Tool Holder 0 End Cutting Edge Angle for Negative 80 Diamond CNM_ Inserts
• MCGNL 16-4D Tool Holder 0 End Cutting Edge Angle for Negative 80 Diamond CNM_ Inserts
• MCGNR 16-4D Tool Holder 0 End Cutting Edge Angle for Negative 80 Diamond CNM_ Inserts
• MCGNR 12-4B Tool Holder 0 End Cutting Edge Angle for Negative 80 Diamond CNM_ Inserts
• MCFNR 24-6E Tool Holder 0 End Cutting Edge Angle for Negative 80 Diamond CNM_ Inserts
• MCGNL 12-4B Tool Holder 0 End Cutting Edge Angle for Negative 80 Diamond CNM_ Inserts
• MCFNR 16-5D Tool Holder 0 End Cutting Edge Angle for Negative 80 Diamond CNM_ Inserts
• MCFNL 24-6E Tool Holder 0 End Cutting Edge Angle for Negative 80 Diamond CNM_ Inserts
• MCFNR 16-6D Tool Holder 0 End Cutting Edge Angle for Negative 80 Diamond CNM_ Inserts
• MCFNL 20-6D Tool Holder 0 End Cutting Edge Angle for Negative 80 Diamond CNM_ Inserts
• MCFNL 20-4D Tool Holder 0 End Cutting Edge Angle for Negative 80 Diamond CNM_ Inserts
• MCFNR 85-4D Tool Holder 0 End Cutting Edge Angle for Negative 80 Diamond CNM_ Inserts
• MCFNL 16-5D Tool Holder 0 End Cutting Edge Angle for Negative 80 Diamond CNM_ Inserts
• MCFNL 85-4D Tool Holder 0 End Cutting Edge Angle for Negative 80 Diamond CNM_ Inserts
• MCFNL 16-6D Tool Holder 0 End Cutting Edge Angle for Negative 80 Diamond CNM_ Inserts
• MCFNR 20-4D Tool Holder 0 End Cutting Edge Angle for Negative 80 Diamond CNM_ Inserts
• MCFNL 20-5D Tool Holder 0 End Cutting Edge Angle for Negative 80 Diamond CNM_ Inserts
• MCFNL 16-4D Tool Holder 0 End Cutting Edge Angle for Negative 80 Diamond CNM_ Inserts
• MCFNR 16-4D Tool Holder 0 End Cutting Edge Angle for Negative 80 Diamond CNM_ Inserts
• MCFNL 12-4B Tool Holder 0 End Cutting Edge Angle for Negative 80 Diamond CNM_ Inserts
• SI-MWLNL 16-4 -5° End & Side Cutting Edge Angle for Negative Trigon WNM_ Inserts
• SI-MWLNR 24-4 -5° End & Side Cutting Edge Angle for Negative Trigon WNM_ Inserts
• SI-MWLNL 20-3 -5° End & Side Cutting Edge Angle for Negative Trigon WNM_ Inserts
• SI-MWLNL 16-3 -5° End & Side Cutting Edge Angle for Negative Trigon WNM_ Inserts
• SI-MWLNR 20-3 -5° End & Side Cutting Edge Angle for Negative Trigon WNM_ Inserts
• SI-MWLNR 20-4 -5° End & Side Cutting Edge Angle for Negative Trigon WNM_ Inserts
• SI-MWLNR 16-4 -5° End & Side Cutting Edge Angle for Negative Trigon WNM_ Inserts
• SI-MWLNR 16-3 -5° End & Side Cutting Edge Angle for Negative Trigon WNM_ Inserts
• SI-MWLNL 20-4 -5° End & Side Cutting Edge Angle for Negative Trigon WNM_ Inserts
• SI-MWLNL 24-4 -5° End & Side Cutting Edge Angle for Negative Trigon WNM_ Inserts
• SI-MVJNL 40-4 -3° Side Cutting Edge Angle for Negative 35° Diamond VNM_ Inserts
• SI-MVJNR 40-4 -3° Side Cutting Edge Angle for Negative 35° Diamond VNM_ Inserts
• SI-MVJNR 36-4 -3° Side Cutting Edge Angle for Negative 35° Diamond VNM_ Inserts
• SI-MVJNR 24-3 -3° Side Cutting Edge Angle for Negative 35° Diamond VNM_ Inserts
• SI-MVJNR 32-4 -3° Side Cutting Edge Angle for Negative 35° Diamond VNM_ Inserts
• SI-MVJNL 24-3 -3° Side Cutting Edge Angle for Negative 35° Diamond VNM_ Inserts
• SI-MVJNR 28-4 -3° Side Cutting Edge Angle for Negative 35° Diamond VNM_ Inserts
• SI-MVJNL 28-4 -3° Side Cutting Edge Angle for Negative 35° Diamond VNM_ Inserts
• SI-MVJNL 36-4 -3° Side Cutting Edge Angle for Negative 35° Diamond VNM_ Inserts
• SI-MVJNL 20-3 -3° Side Cutting Edge Angle for Negative 35° Diamond VNM_ Inserts
• SI-MVJNL 32-4 -3° Side Cutting Edge Angle for Negative 35° Diamond VNM_ Inserts
• SI-MVJNR 20-3 -3° Side Cutting Edge Angle for Negative 35° Diamond VNM_ Inserts
• SI-MTJNR 32-5 -3° End Cutting Edge Angle for Negative Triangle TNM_ Inserts
• SI-MTJNR 40-5 -3° End Cutting Edge Angle for Negative Triangle TNM_ Inserts
• SI-MTJNL 40-5 -3° End Cutting Edge Angle for Negative Triangle TNM_ Inserts
• SI-MTJNL 32-5 -3° End Cutting Edge Angle for Negative Triangle TNM_ Inserts
• SI-MTJNR 16-3 -3° End Cutting Edge Angle for Negative Triangle TNM_ Inserts
• SI-MTJNL 28-4 -3° End Cutting Edge Angle for Negative Triangle TNM_ Inserts
• SI-MTJNL 24-4 -3° End Cutting Edge Angle for Negative Triangle TNM_ Inserts
• SI-MTJNR 28-4 -3° End Cutting Edge Angle for Negative Triangle TNM_ Inserts
• SI-MTJNR 24-4 -3° End Cutting Edge Angle for Negative Triangle TNM_ Inserts
• SI-MTJNL 32-4 -3° End Cutting Edge Angle for Negative Triangle TNM_ Inserts
• SI-MTJNR 32-4 -3° End Cutting Edge Angle for Negative Triangle TNM_ Inserts
• SI-MTJNL 20-3 -3° End Cutting Edge Angle for Negative Triangle TNM_ Inserts
• SI-MTJNR 20-3 -3° End Cutting Edge Angle for Negative Triangle TNM_ Inserts
• SI-MTJNL 16-3 -3° End Cutting Edge Angle for Negative Triangle TNM_ Inserts
• SI-MTFNR 40-6 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts
• SI-MTFNL 40-6 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts
• SI-MTFNR 40-5 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts
• SI-MTFNL 40-5 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts
• SI-MTFNL 32-5 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts
• SI-MTFNR 36-4 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts
• SI-MTFNL 36-4 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts
• SI-MTFNL 40-4 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts
• SI-MTFNR 28-3 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts
• SI-MTFNR 32-5 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts
• SI-MTFNR 24-4 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts
• SI-MTFNR 40-4 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts
• SI-MTFNL 28-3 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts
• SI-MTFNR 32-4 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts
• SI-MTFNR 28-4 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts
• SI-MTFNL 32-4 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts
• SI-MTFNR 16-3 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts
• SI-MTFNL 28-4 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts
• SI-MTFNL 24-3 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts
• SI-MTFNL 24-4 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts
• SI-MTFNR 20-3 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts
• SI-MTFNL 16-3 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts
• SI-MTFNR 24-3 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts
• SI-MTFNL 20-3 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts
• SI-MSKNR 40-6 15° End Cutting Edge Angle for Negative Square SNM_ Inserts
• SI-MSKNL 36-6 15° End Cutting Edge Angle for Negative Square SNM_ Inserts
• SI-MSKNL 40-6 15° End Cutting Edge Angle for Negative Square SNM_ Inserts
• SI-MSKNR 36-6 15° End Cutting Edge Angle for Negative Square SNM_ Inserts
• SI-MSKNR 20-4 15° End Cutting Edge Angle for Negative Square SNM_ Inserts
• SI-MSKNR 32-5 15° End Cutting Edge Angle for Negative Square SNM_ Inserts
• SI-MSKNR 24-4 15° End Cutting Edge Angle for Negative Square SNM_ Inserts
• SI-MSKNL 32-5 15° End Cutting Edge Angle for Negative Square SNM_ Inserts
• SI-MSKNL 20-4 15° End Cutting Edge Angle for Negative Square SNM_ Inserts
• SI-MSKNR 32-6 15° End Cutting Edge Angle for Negative Square SNM_ Inserts
• SI-MSKNR 28-4 15° End Cutting Edge Angle for Negative Square SNM_ Inserts
• SI-MSKNL 28-4 15° End Cutting Edge Angle for Negative Square SNM_ Inserts
• SI-MSKNL 24-4 15° End Cutting Edge Angle for Negative Square SNM_ Inserts
• SI-MSKNL 32-6 15° End Cutting Edge Angle for Negative Square SNM_ Inserts
• SI-MDJNR 32-5 -3° Side & End Cutting Edge Angle for Negative 55° Diamond DNM_ Inserts
• SI-MDJNL 32-5 -3° Side & End Cutting Edge Angle for Negative 55° Diamond DNM_ Inserts
• SI-MDJNR 36-5 -3° Side & End Cutting Edge Angle for Negative 55° Diamond DNM_ Inserts
• SI-MDJNL 40-5 -3° Side & End Cutting Edge Angle for Negative 55° Diamond DNM_ Inserts
• SI-MDJNR 40-5 -3° Side & End Cutting Edge Angle for Negative 55° Diamond DNM_ Inserts
• SI-MDJNL 36-5 -3° Side & End Cutting Edge Angle for Negative 55° Diamond DNM_ Inserts
• SI-MDJNR 32-4 -3° Side & End Cutting Edge Angle for Negative 55° Diamond DNM_ Inserts
• SI-MDJNR 24-4 -3° Side & End Cutting Edge Angle for Negative 55° Diamond DNM_ Inserts
• SI-MDJNR 28-4 -3° Side & End Cutting Edge Angle for Negative 55° Diamond DNM_ Inserts
• SI-MDJNL 28-4 -3° Side & End Cutting Edge Angle for Negative 55° Diamond DNM_ Inserts
• SI-MDJNL 20-4 -3° Side & End Cutting Edge Angle for Negative 55° Diamond DNM_ Inserts
• SI-MDJNR 20-4 -3° Side & End Cutting Edge Angle for Negative 55° Diamond DNM_ Inserts
• SI-MDJNL 24-4 -3° Side & End Cutting Edge Angle for Negative 55° Diamond DNM_ Inserts
• SI-MDJNR 28-5 -3° Side & End Cutting Edge Angle for Negative 55° Diamond DNM_ Inserts
• SI-MDJNL 28-5 -3° Side & End Cutting Edge Angle for Negative 55° Diamond DNM_ Inserts
• SI-MDJNL 32-4 -3° Side & End Cutting Edge Angle for Negative 55° Diamond DNM_ Inserts
• SI-MCLNR 40-6 -5° Side & End Cutting Edge Angle for Negative 80° Diamond CNM_ Inserts
• SI-MCLNL 40-6 -5° Side & End Cutting Edge Angle for Negative 80° Diamond CNM_ Inserts
• SI-MCLNR 24-4 -5° Side & End Cutting Edge Angle for Negative 80° Diamond CNM_ Inserts
• SI-MCLNR 36-6 -5° Side & End Cutting Edge Angle for Negative 80° Diamond CNM_ Inserts
• SI-MCLNL 32-5 -5° Side & End Cutting Edge Angle for Negative 80° Diamond CNM_ Inserts
• SI-MCLNL 32-4 -5° Side & End Cutting Edge Angle for Negative 80° Diamond CNM_ Inserts
• SI-MCLNL 36-6 -5° Side & End Cutting Edge Angle for Negative 80° Diamond CNM_ Inserts
• SI-MCLNR 32-6 -5° Side & End Cutting Edge Angle for Negative 80° Diamond CNM_ Inserts
• SI-MCLNR 32-5 -5° Side & End Cutting Edge Angle for Negative 80° Diamond CNM_ Inserts
• SI-MCLNR 28-4 -5° Side & End Cutting Edge Angle for Negative 80° Diamond CNM_ Inserts
• SI-MCLNL 32-6 -5° Side & End Cutting Edge Angle for Negative 80° Diamond CNM_ Inserts
• SI-MCLNL 28-4 -5° Side & End Cutting Edge Angle for Negative 80° Diamond CNM_ Inserts
• SI-MCLNR 32-4 -5° Side & End Cutting Edge Angle for Negative 80° Diamond CNM_ Inserts
• SI-MCLNR 20-4 -5° Side & End Cutting Edge Angle for Negative 80° Diamond CNM_ Inserts
• SI-MCLNL 20-4 -5° Side & End Cutting Edge Angle for Negative 80° Diamond CNM_ Inserts
• SI-MCLNL 24-4 -5° Side & End Cutting Edge Angle for Negative 80° Diamond CNM_ Inserts
• SI-MCLNR 16-4 -5° Side & End Cutting Edge Angle for Negative 80° Diamond CNM_ Inserts
• SI-MCLNR 16-3 -5° Side & End Cutting Edge Angle for Negative 80° Diamond CNM_ Inserts
• SI-MCLNL 16-3 -5° Side & End Cutting Edge Angle for Negative 80° Diamond CNM_ Inserts
• SI-MCLNL 16-4 -5° Side & End Cutting Edge Angle for Negative 80° Diamond CNM_ Inserts
• SI-MCLNR 12-3 -5° Side & End Cutting Edge Angle for Negative 80° Diamond CNM_ Inserts
• SI-MCLNL 12-3 -5° Side & End Cutting Edge Angle for Negative 80° Diamond CNM_ Inserts
• 1-1/2" Keyseat Cutter with Hardened Steel Shank. ANSI 1212 - Face Width 3/8" OAL 2-3/8" Shank OD 1/2" - 16 Flutes - Uncoated
• 1-1/2" Keyseat Cutter with Hardened Steel Shank. ANSI 1012 - Face Width 5/16" OAL 2-5/16" Shank OD 1/2" - 16 Flutes - Uncoated
• 1-1/2" Keyseat Cutter with Hardened Steel Shank. ANSI 812 - Face Width 1/4" OAL 2-1/4" Shank OD 1/2" - 16 Flutes - Uncoated
• 1-1/4" Keyseat Cutter with Hardened Steel Shank. ANSI 810 - Face Width 1/4" OAL 2-1/4" Shank OD 1/2" - 14 Flutes - Uncoated
• 1-1/4" Keyseat Cutter with Hardened Steel Shank. ANSI 710 - Face Width 7/32" OAL 2-7/32" Shank OD 1/2" - 14 Flutes - Uncoated
• 1-1/4" Keyseat Cutter with Hardened Steel Shank. ANSI 610 - Face Width 3/16" OAL 2-3/16" Shank OD 1/2" - 14 Flutes - Uncoated
• 1-1/8" Keyseat Cutter with Hardened Steel Shank. ANSI 809 - Face Width 1/4" OAL 2-1/4" Shank OD 1/2" - 14 Flutes - Uncoated
• 1-1/8" Keyseat Cutter with Hardened Steel Shank. ANSI 709 - Face Width 7/32" OAL 2-7/32" Shank OD 1/2" - 14 Flutes - Uncoated
• 1-1/8" Keyseat Cutter with Hardened Steel Shank. ANSI 609 - Face Width 3/16" OAL 2-3/16" Shank OD 1/2" - 14 Flutes - Uncoated
• 1" Keyseat Cutter with Hardened Steel Shank. ANSI 808 - Face Width 1/4" OAL 2-1/4" Shank OD 1/2" - 12 Flutes - Uncoated
• 1" Keyseat Cutter with Hardened Steel Shank. ANSI 708 - Face Width 7/32" OAL 2-7/32" Shank OD 1/2" - 12 Flutes - Uncoated
• 1" Keyseat Cutter with Hardened Steel Shank. ANSI 608 - Face Width 3/16" OAL 2-3/16" Shank OD 1/2" - 12 Flutes - Uncoated
• 7/8" Keyseat Cutter with Hardened Steel Shank. ANSI 807 - Face Width 1/4" OAL 2-1/4" Shank OD 1/2" - 12 Flutes - Uncoated
• 7/8" Keyseat Cutter with Hardened Steel Shank. ANSI 707 - Face Width 7/32" OAL 2-7/32" Shank OD 1/2" - 12 Flutes - Uncoated
• 7/8" Keyseat Cutter with Hardened Steel Shank. ANSI 607 - Face Width 3/16" OAL 2-3/16" Shank OD 1/2" - 12 Flutes - Uncoated
• 7/8" Keyseat Cutter with Hardened Steel Shank. ANSI 507 - Face Width 5/32" OAL 2-5/32" Shank OD 1/2" - 12 Flutes - Uncoated
• 3/4" Keyseat Cutter with Hardened Steel Shank. ANSI 806 - Face Width 1/4" OAL 2-1/4" Shank OD 1/2" - 10 Flutes - Uncoated
• 3/4" Keyseat Cutter with Hardened Steel Shank. ANSI 606 - Face Width 3/16" OAL 2-3/16" Shank OD 1/2" - 10 Flutes - Uncoated
• 3/4" Keyseat Cutter with Hardened Steel Shank. ANSI 506 - Face Width 5/32" OAL 2-5/32" Shank OD 1/2" - 10 Flutes - Uncoated
• 3/4" Keyseat Cutter with Hardened Steel Shank. ANSI 406 - Face Width 1/8" OAL 2-1/8" Shank OD 1/2" - 10 Flutes - Uncoated
• 5/8" Keyseat Cutter with Hardened Steel Shank. ANSI 605 - Face Width 3/16" OAL 2-3/16" Shank OD 1/2" - 10 Flutes - Uncoated
• 5/8" Keyseat Cutter with Hardened Steel Shank. ANSI 505 - Face Width 5/32" OAL 2-5/32" Shank OD 1/2" - 10 Flutes - Uncoated
• 5/8" Keyseat Cutter with Hardened Steel Shank. ANSI 405 - Face Width 1/8" OAL 2-1/8" Shank OD 1/2" - 10 Flutes - Uncoated
• 5/8" Keyseat Cutter with Hardened Steel Shank. ANSI 305 - Face Width 3/32" OAL 2-3/32" Shank OD 1/2" - 10 Flutes - Uncoated
• 1/2" Keyseat Cutter with Hardened Steel Shank. ANSI 404 - Face Width 1/8" OAL 2-1/8" Shank OD 1/2" - 10 Flutes - Uncoated
• 1/2" Keyseat Cutter with Hardened Steel Shank. ANSI 304 - Face Width 3/32" OAL 2-3/32" Shank OD 1/2" - 10 Flutes - Uncoated
• 3/8" Keyseat Cutter with Hardened Steel Shank. ANSI 403 - Face Width 1/8" OAL 2-1/8" Shank OD 1/2" - 8 Flutes - Uncoated
• 3/8" Keyseat Cutter with Hardened Steel Shank. ANSI 303 - Face Width 3/32" OAL 2-3/32" Shank OD 1/2" - 8 Flutes - Uncoated
• 1/2" Router. 2 LH Spiral, LH Cutting Flutes - Flute Length 1" Shank OD 1/2" OAL 2-1/2" - Uncoated
• 3/8" Router. 2 LH Spiral, LH Cutting Flutes - Flute Length 1" Shank OD 3/8" OAL 2-1/2" - Uncoated
• 1/4" Router. 2 LH Spiral, LH Cutting Flutes - Flute Length 1" Shank OD 1/4" OAL 2-1/2" - Uncoated
• 3/16" Router. 2 LH Spiral, LH Cutting Flutes - Flute Length 5/8" Shank OD 3/16" OAL 2" - Uncoated
• 1/8" Router. 2 LH Spiral, LH Cutting Flutes - Flute Length 1/2" Shank OD 1/8" OAL 1-1/2" - Uncoated
• 1/2" Router. 2 RH Spiral, RH Cutting Flutes - Flute Length 1" Shank OD 1/2" OAL 2-1/2" - Uncoated
• 3/8" Router. 2 RH Spiral, RH Cutting Flutes - Flute Length 1" Shank OD 3/8" OAL 2-1/2" - Uncoated
• 1/4" Router. 2 RH Spiral, RH Cutting Flutes - Flute Length 1" Shank OD 1/4" OAL 2-1/2" - Uncoated
• 3/16" Router. 2 RH Spiral, RH Cutting Flutes - Flute Length 5/8" Shank OD 3/16" OAL 2" - Uncoated
• 1/8" Router. 2 RH Spiral, RH Cutting Flutes - Flute Length 1/2" Shank OD 1/8" OAL 1-1/2" - Uncoated
• 1/2" Router. 2 Flutes Straight - Flute Length 1" Shank OD 1/2" OAL 2-1/2" - Uncoated
• 3/8" Router. 2 Flutes Straight - Flute Length 1" Shank OD 3/8" OAL 2-1/2" - Uncoated
• 1/4" Router. 2 Flutes Straight - Flute Length 1" Shank OD 1/4" OAL 2-1/2" - Uncoated
• 3/16" Router. 2 Flutes Straight - Flute Length 5/8" Shank OD 3/16" OAL 2" - Uncoated
• 1/8" Router. 2 Flutes Straight - Flute Length 1/2" Shank OD 1/8" OAL 1-1/2" - Uncoated
• 1/2" Burr - End Mill End. Flute Length 1" Shank OD 1/2" OAL 3" - Uncoated
• 3/8" Burr - End Mill End. Flute Length 1" Shank OD 3/8" OAL 2-1/2" - Uncoated
• 5/16" Burr - End Mill End. Flute Length 1" Shank OD 5/16" OAL 2-1/2" - Uncoated
• 1/4" Burr - End Mill End. Flute Length 1" Shank OD 1/4" OAL 3" - Uncoated
• 1/4" Burr - End Mill End. Flute Length 1" Shank OD 1/4" OAL 2-1/2" - Uncoated
• 1/4" Burr - End Mill End. Flute Length 3/4" Shank OD 1/4" OAL 2" - Uncoated
• 3/16" Burr - End Mill End. Flute Length 5/8" Shank OD 3/16" OAL 2" - Uncoated
• 1/8" Burr - End Mill End. Flute Length 1/2" Shank OD 1/8" OAL 1-1/2" - Uncoated
• 1/16" Burr - End Mill End. Flute Length 3/16" Shank OD 1/8" OAL 1-1/2" - Uncoated
• 1/2" Burr - 135 Degree Drill Point End. Flute Length 1" Shank OD 1/2" OAL 3" - Uncoated
• 3/8" Burr - 135 Degree Drill Point End. Flute Length 1" Shank OD 3/8" OAL 2-1/2" - Uncoated
• 5/16" Burr - 135 Degree Drill Point End. Flute Length 1" Shank OD 5/16" OAL 2-1/2" - Uncoated
• 1/4" Burr - 135 Degree Drill Point End. Flute Length 1" Shank OD 1/4" OAL 3" - Uncoated
• 1/4" Burr - 135 Degree Drill Point End. Flute Length 1" Shank OD 1/4" OAL 2-1/2" - Uncoated
• 1/4" Burr - 135 Degree Drill Point End. Flute Length 3/4" Shank OD 1/4" OAL 2" - Uncoated
• 3/16" Burr - 135 Degree Drill Point End. Flute Length 5/8" Shank OD 3/16" OAL 2" - Uncoated
• 1/8" Burr - 135 Degree Drill Point End. Flute Length 1/2" Shank OD 1/8" OAL 1-1/2" - Uncoated
• 1/16" Burr - 135 Degree Drill Point End. Flute Length 3/16" Shank OD 1/8" OAL 1-1/2" - Uncoated
• 1/2" Burr - Burr End. Flute Length 1" Shank OD 1/2" OAL 3" - Uncoated
• 3/8" Burr - Burr End. Flute Length 1" Shank OD 3/8" OAL 2-1/2" - Uncoated
• 5/16" Burr - Burr End. Flute Length 1" Shank OD 5/16" OAL 2-1/2" - Uncoated
• 1/4" Burr - Burr End. Flute Length 1" Shank OD 1/4" OAL 3" - Uncoated
• 1/4" Burr - Burr End. Flute Length 1" Shank OD 1/4" OAL 2-1/2" - Uncoated
• 1/4" Burr - Burr End. Flute Length 3/4" Shank OD 1/4" OAL 2" - Uncoated
• 3/16" Burr - Burr End. Flute Length 5/8" Shank OD 3/16" OAL 2" - Uncoated
• 1/8" Burr - Burr End. Flute Length 1/2" Shank OD 1/8" OAL 1-1/2" - Uncoated
• 1/16" Burr - Burr End. Flute Length 3/16" Shank OD 1/8" OAL 1-1/2" - Uncoated
• 1/2" Burr - No End Cut. Flute Length 1" Shank OD 1/2" OAL 3" - Uncoated
• 3/8" Burr - No End Cut. Flute Length 1" Shank OD 3/8" OAL 2-1/2" - Uncoated
• 5/16" Burr - No End Cut. Flute Length 1" Shank OD 5/16" OAL 2-1/2" - Uncoated
• 1/4" Burr - No End Cut. Flute Length 1" Shank OD 1/4" OAL 3" - Uncoated
• 1/4" Burr - No End Cut. Flute Length 1" Shank OD 1/4" OAL 2-1/2" - Uncoated
• 1/4" Burr - No End Cut. Flute Length 3/4" Shank OD 1/4" OAL 2" - Uncoated
• 3/16" Burr - No End Cut. Flute Length 5/8" Shank OD 3/16" OAL 2" - Uncoated
• 1/8" Burr - No End Cut. Flute Length 1/2" Shank OD 1/8" OAL 1-1/2" - Uncoated
• 1/16" Burr - No End Cut. Flute Length 3/16" Shank OD 1/8" OAL 1-1/2" - Uncoated
• Carbide Burr Set 1/4" Shank Coated. Tool Numbers: SA-3, SC-1, SC-3, SD-1, SE-5, SF-3, SF-5, SG-1, SL-3, SM-42 - Coated
• Carbide Burr Set 1/4" Shank Uncoated. Tool Numbers: SA-3, SC-1, SC-3, SD-1, SE-5, SF-3, SF-5, SG-1, SL-3, SM-42 - Uncoated
• Carbide Burr Set 1/4" Shank Coated. Tool Numbers: SA-1, SC-1, SD-1, SE-1, SF-1, SG-1, SH-1, SL-1, SM-2, SN-1 - Coated
• Carbide Burr Set 1/4" Shank Uncoated. Tool Numbers: SA-1, SC-1, SD-1, SE-1, SF-1, SG-1, SH-1, SL-1, SM-2, SN-1 - Uncoated
• Carbide Burr Set 1/8" Shank Coated. Tool Numbers: SA-41, SB-43, SC-41, SC-42, SD-41, SD-42, SE-41, SF-41, SG-43, SG-44, SH-41, SJ-42, SM-42, SN-42- Coated
• Carbide Burr Set 1/8" Shank Uncoated. Tool Numbers: SA-41, SB-43, SC-41, SC-42, SD-41, SD-42, SE-41, SF-41, SG-43, SG-44, SH-41, SJ-42, SM-42, SN-42 - Uncoated
• 3/16" Carbide Tire Burrs Set (3 Pieces per Set). Cutting Length 2" Shank OD 3/16" OAL 3" - Uncoated
• 3/16" SN Shape Carbide Burr. Double Cut Inverted Cone Shape, 10 Degree Included. LOC 1/4" Shank OD 3/16" OAL 2" - Uncoated
• 3/16" SN Shape Carbide Burr. Single Cut Inverted Cone Shape, 10 Degree Included. LOC 1/4" Shank OD 3/16" OAL 2" - Uncoated
• 3/32" SN Shape Carbide Burr. Double Cut Inverted Cone Shape, 10 Degree Included. LOC 1/8" Shank OD 3/32" OAL 1-1/2" - Uncoated
• 3/32" SN Shape Carbide Burr. Single Cut Inverted Cone Shape, 10 Degree Included. LOC 1/8" Shank OD 3/32" OAL 1-1/2" - Uncoated
• 3/16" SN Shape Carbide Burr. Double Cut Inverted Cone Shape, 10 Degree Included. LOC 1/4" Shank OD 1/8" OAL 1-11/16" - Uncoated
• 3/16" SN Shape Carbide Burr. Single Cut Inverted Cone Shape, 10 Degree Included. LOC 1/4" Shank OD 1/8" OAL 1-11/16" - Uncoated
• 1/4" SN Shape Carbide Burr. Double Cut Inverted Cone Shape, 10 Degree Included. LOC 1/4" Shank OD 1/8" OAL 1-3/4" - Uncoated
• 1/4" SN Shape Carbide Burr. Single Cut Inverted Cone Shape, 10 Degree Included. LOC 1/4" Shank OD 1/8" OAL 1-3/4" - Uncoated
• 1/8" SN Shape Carbide Burr. Double Cut Inverted Cone Shape, 10 Degree Included. LOC 3/16" Shank OD 1/8" OAL 1-1/2" - Uncoated
• 1/8" SN Shape Carbide Burr. Single Cut Inverted Cone Shape, 10 Degree Included. LOC 3/16" Shank OD 1/8" OAL 1-1/2" - Uncoated
• 3/32" SN Shape Carbide Burr. Double Cut Inverted Cone Shape, 10 Degree Included. LOC 1/8" Shank OD 1/8" OAL 1-1/2" - Uncoated
• 3/32" SN Shape Carbide Burr. Single Cut Inverted Cone Shape, 10 Degree Included. LOC 1/8" Shank OD 1/8" OAL 1-1/2" - Uncoated
• 3/4" SN Shape Carbide Burr. Double Cut Inverted Cone Shape, 30 Degree Included. LOC 5/8" Shank OD 1/4" OAL 2-1/2" - Uncoated
• 3/4" SN Shape Carbide Burr. Single Cut Inverted Cone Shape, 30 Degree Included. LOC 5/8" Shank OD 1/4" OAL 2-1/2" - Uncoated
• 5/8" SN Shape Carbide Burr. Double Cut Inverted Cone Shape, 18 Degree Included. LOC 3/4" Shank OD 1/4" OAL 2-3/8" - Uncoated
• 5/8" SN Shape Carbide Burr. Single Cut Inverted Cone Shape, 18 Degree Included. LOC 3/4" Shank OD 1/4" OAL 2-3/8" - Uncoated
• 1/2" SN Shape Carbide Burr. Double Cut Inverted Cone Shape, 28 Degree Included. LOC 1/2" Shank OD 1/4" OAL 2-1/4" - Uncoated
• 1/2" SN Shape Carbide Burr. Single Cut Inverted Cone Shape, 28 Degree Included. LOC 1/2" Shank OD 1/4" OAL 2-1/4" - Uncoated
• 3/8" SN Shape Carbide Burr. Double Cut Inverted Cone Shape, 13 Degree Included. LOC 3/8" Shank OD 1/4" OAL 2-1/8" - Uncoated
• 3/8" SN Shape Carbide Burr. Single Cut Inverted Cone Shape, 13 Degree Included. LOC 3/8" Shank OD 1/4" OAL 2-1/8" - Uncoated
• 1/4" SN Shape Carbide Burr. Double Cut Inverted Cone Shape, 10 Degree Included. LOC 5/16" Shank OD 1/4" OAL 2" - Uncoated
• 1/4" SN Shape Carbide Burr. Single Cut Inverted Cone Shape, 10 Degree Included. LOC 5/16" Shank OD 1/4" OAL 2" - Uncoated
• 3/32" SM Shape Carbide Burr. Double Cut Cone Shape, 10 Degree Included. LOC 1/4" Shank OD 3/32" OAL 1-1/2" - Uncoated
• 3/32" SM Shape Carbide Burr. Single Cut Cone Shape, 10 Degree Included. LOC 1/4" Shank OD 3/32" OAL 1-1/2" - Uncoated
• 3/16" SM Shape Carbide Burr. Double Cut Cone Shape, 16 Degree Included. LOC 1/2" Shank OD 1/8" OAL 1-11/16" - Uncoated
• 3/16" SM Shape Carbide Burr. Single Cut Cone Shape, 16 Degree Included. LOC 1/2" Shank OD 1/8" OAL 1-11/16" - Uncoated
• 1/4" SM Shape Carbide Burr. Double Cut Cone Shape, 22 Degree Included. LOC 1/2" Shank OD 1/8" OAL 1-1/4" - Uncoated
• 1/4" SM Shape Carbide Burr. Single Cut Cone Shape, 22 Degree Included. LOC 1/2" Shank OD 1/8" OAL 1-1/4" - Uncoated
• 1/8" SM Shape Carbide Burr. Double Cut Cone Shape, 7 Degree Included. LOC 5/8" Shank OD 1/8" OAL 1-1/2" - Uncoated
• 1/8" SM Shape Carbide Burr. Single Cut Cone Shape, 7 Degree Included. LOC 5/8" Shank OD 1/8" OAL 1-1/2" - Uncoated
• 1/8" SM Shape Carbide Burr. Double Cut Cone Shape, 14 Degree Included. LOC 7/16" Shank OD 1/8" OAL 3" - Uncoated
• 1/8" SM Shape Carbide Burr. Single Cut Cone Shape, 14 Degree Included. LOC 7/16" Shank OD 1/8" OAL 3" - Uncoated
• 1/8" SM Shape Carbide Burr. Double Cut Cone Shape, 14 Degree Included. LOC 7/16" Shank OD 1/8" OAL 2" - Uncoated
• 1/8" SM Shape Carbide Burr. Single Cut Cone Shape, 14 Degree Included. LOC 7/16" Shank OD 1/8" OAL 2" - Uncoated
• 1/8" SM Shape Carbide Burr. Double Cut Cone Shape, 14 Degree Included. LOC 7/16" Shank OD 1/8" OAL 1-1/2" - Uncoated
• 1/8" SM Shape Carbide Burr. Single Cut Cone Shape, 14 Degree Included. LOC 7/16" Shank OD 1/8" OAL 1-1/2" - Uncoated
• 1/8" SM Shape Carbide Burr. Double Cut Cone Shape, 12 Degree Included. LOC 11/32" Shank OD 1/8" OAL 1-1/2" - Uncoated
• 1/8" SM Shape Carbide Burr. Single Cut Cone Shape, 12 Degree Included. LOC 11/32" Shank OD 1/8" OAL 1-1/2" - Uncoated
• 5/8" SM Shape Carbide Burr. Double Cut Cone Shape, 31 Degree Included. LOC 1" Shank OD 1/4" OAL 2-3/8" - Uncoated
• 5/8" SM Shape Carbide Burr. Single Cut Cone Shape, 31 Degree Included. LOC 1" Shank OD 1/4" OAL 2-3/8" - Uncoated
• 1/2" SM Shape Carbide Burr. Double Cut Cone Shape, 28 Degree Included. LOC 7/8" Shank OD 1/4" OAL 2-1/4" - Uncoated
• 1/2" SM Shape Carbide Burr. Single Cut Cone Shape, 28 Degree Included. LOC 7/8" Shank OD 1/4" OAL 2-1/4" - Uncoated
• 3/8" SM Shape Carbide Burr. Double Cut Cone Shape, 28 Degree Included. LOC 5/8" Shank OD 1/4" OAL 2-1/8" - Uncoated
• 3/8" SM Shape Carbide Burr. Single Cut Cone Shape, 28 Degree Included. LOC 5/8" Shank OD 1/4" OAL 2-1/8" - Uncoated
• 1/4" SM Shape Carbide Burr. Double Cut Cone Shape, 10 Degree Included. LOC 1" Shank OD 1/4" OAL 2" - Uncoated
• 1/4" SM Shape Carbide Burr. Single Cut Cone Shape, 10 Degree Included. LOC 1" Shank OD 1/4" OAL 2" - Uncoated
• 1/4" SM Shape Carbide Burr. Double Cut Cone Shape, 14 Degree Included. LOC 3/4" Shank OD 1/4" OAL 2" - Uncoated
• 1/4" SM Shape Carbide Burr. Single Cut Cone Shape, 14 Degree Included. LOC 3/4" Shank OD 1/4" OAL 2" - Uncoated
• 1/4" SM Shape Carbide Burr. Double Cut Cone Shape, 22 Degree Included. LOC 1/2" Shank OD 1/4" OAL 2" - Uncoated
• 1/4" SM Shape Carbide Burr. Single Cut Cone Shape, 22 Degree Included. LOC 1/2" Shank OD 1/4" OAL 2" - Uncoated
• 3/16" SL Shape Carbide Burr. Double Cut Ball Nosed Cone. LOC 1/2" Shank OD 3/16" OAL 2" - Uncoated
• 3/16" SL Shape Carbide Burr. Single Cut Ball Nosed Cone. LOC 1/2" Shank OD 3/16" OAL 2" - Uncoated
• 3/16" SL Shape Carbide Burr. Double Cut Ball Nosed Cone. LOC 1/2" Shank OD 1/8" OAL 1-11/16" - Uncoated
• 3/16" SL Shape Carbide Burr. Single Cut Ball Nosed Cone. LOC 1/2" Shank OD 1/8" OAL 1-11/16" - Uncoated
• 1/8" SL Shape Carbide Burr. Double Cut Ball Nosed Cone. LOC 1/2" Shank OD 1/8" OAL 3" - Uncoated
• 1/8" SL Shape Carbide Burr. Single Cut Ball Nosed Cone. LOC 1/2" Shank OD 1/8" OAL 3" - Uncoated
• 1/8" SL Shape Carbide Burr. Double Cut Ball Nosed Cone. LOC 1/2" Shank OD 1/8" OAL 2" - Uncoated
• 1/8" SL Shape Carbide Burr. Single Cut Ball Nosed Cone. LOC 1/2" Shank OD 1/8" OAL 2" - Uncoated
• 1/8" SL Shape Carbide Burr. Double Cut Ball Nosed Cone. LOC 1/2" Shank OD 1/8" OAL 1-1/2" - Uncoated
• 1/8" SL Shape Carbide Burr. Single Cut Ball Nosed Cone. LOC 1/2" Shank OD 1/8" OAL 1-1/2" - Uncoated
• 1/8" SL Shape Carbide Burr. Double Cut Ball Nosed Cone. LOC 3/8" Shank OD 1/8" OAL 1-1/2" - Uncoated
• 1/8" SL Shape Carbide Burr. Single Cut Ball Nosed Cone. LOC 3/8" Shank OD 1/8" OAL 1-1/2" - Uncoated
• 3/4" SL Shape Carbide Burr. Double Cut Ball Nosed Cone. LOC 1-1/2" Shank OD 1/4" OAL 2-1/2" - Uncoated
• 3/4" SL Shape Carbide Burr. Single Cut Ball Nosed Cone. LOC 1-1/2" Shank OD 1/4" OAL 2-1/2" - Uncoated
• 3/4" SL Shape Carbide Burr. Double Cut Ball Nosed Cone. LOC 1-1/2" Shank OD 1/4" OAL 2-1/2" - Uncoated
• 3/4" SL Shape Carbide Burr. Single Cut Ball Nosed Cone. LOC 1-1/2" Shank OD 1/4" OAL 2-1/2" - Uncoated
• 5/8" SL Shape Carbide Burr. Double Cut Ball Nosed Cone. LOC 1-5/16" Shank OD 1/4" OAL 2-3/8" - Uncoated
• 5/8" SL Shape Carbide Burr. Single Cut Ball Nosed Cone. LOC 1-5/16" Shank OD 1/4" OAL 2-3/8" - Uncoated
• 5/8" SL Shape Carbide Burr. Double Cut Ball Nosed Cone. LOC 1-5/16" Shank OD 1/4" OAL 2-3/8" - Uncoated
• 5/8" SL Shape Carbide Burr. Single Cut Ball Nosed Cone. LOC 1-5/16" Shank OD 1/4" OAL 2-3/8" - Uncoated
• 5/8" SL Shape Carbide Burr. Double Cut Ball Nosed Cone. LOC 1-3/16" Shank OD 1/4" OAL 2-3/8" - Uncoated
• 5/8" SL Shape Carbide Burr. Single Cut Ball Nosed Cone. LOC 1-3/16" Shank OD 1/4" OAL 2-3/8" - Uncoated
• 5/8" SL Shape Carbide Burr. Double Cut Ball Nosed Cone. LOC 1-3/16" Shank OD 1/4" OAL 2-3/8" - Uncoated
• 5/8" SL Shape Carbide Burr. Single Cut Ball Nosed Cone. LOC 1-3/16" Shank OD 1/4" OAL 2-3/8" - Uncoated
• 1/2" SL Shape Carbide Burr. Double Cut Ball Nosed Cone. LOC 1-1/8" Shank OD 1/4" OAL 2-1/4" - Uncoated
• 1/2" SL Shape Carbide Burr. Single Cut Ball Nosed Cone. LOC 1-1/8" Shank OD 1/4" OAL 2-1/4" - Uncoated
• 1/2" SL Shape Carbide Burr. Double Cut Ball Nosed Cone. LOC 1-1/8" Shank OD 1/4" OAL 6-1/2" - Uncoated
• 1/2" SL Shape Carbide Burr. Single Cut Ball Nosed Cone. LOC 1-1/8" Shank OD 1/4" OAL 6-1/2" - Uncoated
• 1/2" SL Shape Carbide Burr. Double Cut Ball Nosed Cone. LOC 1-1/8" Shank OD 1/4" OAL 2-1/4" - Uncoated
• 1/2" SL Shape Carbide Burr. Single Cut Ball Nosed Cone. LOC 1-1/8" Shank OD 1/4" OAL 2-1/4" - Uncoated
• 3/8" SL Shape Carbide Burr. Double Cut Ball Nosed Cone. LOC 1-1/16" Shank OD 1/4" OAL 2-1/8" - Uncoated
• 3/8" SL Shape Carbide Burr. Single Cut Ball Nosed Cone. LOC 1-1/16" Shank OD 1/4" OAL 2-1/8" - Uncoated
• 3/8" SL Shape Carbide Burr. Double Cut Ball Nosed Cone. LOC 1/16" Shank OD 1/4" OAL 6-3/8" - Uncoated
• 3/8" SL Shape Carbide Burr. Single Cut Ball Nosed Cone. LOC 1/16" Shank OD 1/4" OAL 6-3/8" - Uncoated
• 3/8" SL Shape Carbide Burr. Double Cut Ball Nosed Cone. LOC 1-1/16" Shank OD 1/4" OAL 2-1/8" - Uncoated
• 3/8" SL Shape Carbide Burr. Single Cut Ball Nosed Cone. LOC 1-1/16" Shank OD 1/4" OAL 2-1/8" - Uncoated
• 5/16" SL Shape Carbide Burr. Double Cut Ball Nosed Cone. LOC 7/8" Shank OD 1/4" OAL 2-1/16" - Uncoated
• 5/16" SL Shape Carbide Burr. Single Cut Ball Nosed Cone. LOC 7/8" Shank OD 1/4" OAL 2-1/16" - Uncoated
• 1/4" SL Shape Carbide Burr. Double Cut Ball Nosed Cone. LOC 5/8" Shank OD 1/4" OAL 6-1/4" - Uncoated
• 1/4" SL Shape Carbide Burr. Single Cut Ball Nosed Cone. LOC 5/8" Shank OD 1/4" OAL 6-1/4" - Uncoated
• 1/4" SL Shape Carbide Burr. Double Cut Ball Nosed Cone. LOC 5/8" Shank OD 1/4" OAL 2" - Uncoated
• 1/4" SL Shape Carbide Burr. Single Cut Ball Nosed Cone. LOC 5/8" Shank OD 1/4" OAL 2" - Uncoated
• 1/8" SK Shape Carbide Burr. Double Cut Deburring 90 Degree Included. LOC 1/16" Shank OD 1/8" OAL 1-1/2" - Uncoated
• 1/8" SK Shape Carbide Burr. Single Cut Deburring 90 Degree Included. LOC 1/16" Shank OD 1/8" OAL 1-1/2" - Uncoated
• 1" SK Shape Carbide Burr. Double Cut Deburring 90 Degree Included. LOC 1/2" Shank OD 1/4" OAL 2-3/4" - Uncoated
• 1" SK Shape Carbide Burr. Single Cut Deburring 90 Degree Included. LOC 1/2" Shank OD 1/4" OAL 2-3/4" - Uncoated
• 3/4" SK Shape Carbide Burr. Double Cut Deburring 90 Degree Included. LOC 3/8" Shank OD 1/4" OAL 2-1/2" - Uncoated
• 3/4" SK Shape Carbide Burr. Single Cut Deburring 90 Degree Included. LOC 3/8" Shank OD 1/4" OAL 2-1/2" - Uncoated
• 5/8" SK Shape Carbide Burr. Double Cut Deburring 90 Degree Included. LOC 5/16" Shank OD 1/4" OAL 2-3/8" - Uncoated
• 5/8" SK Shape Carbide Burr. Single Cut Deburring 90 Degree Included. LOC 5/16" Shank OD 1/4" OAL 2-3/8" - Uncoated
• 1/2" SK Shape Carbide Burr. Double Cut Deburring 90 Degree Included. LOC 1/4" Shank OD 1/4" OAL 2-1/4" - Uncoated
• 1/2" SK Shape Carbide Burr. Single Cut Deburring 90 Degree Included. LOC 1/4" Shank OD 1/4" OAL 2-1/4" - Uncoated
• 3/8" SK Shape Carbide Burr. Double Cut Deburring 90 Degree Included. LOC 3/16" Shank OD 1/4" OAL 2-1/8" - Uncoated
• 3/8" SK Shape Carbide Burr. Single Cut Deburring 90 Degree Included. LOC 3/16" Shank OD 1/4" OAL 2-1/8" - Uncoated
• 1/4" SK Shape Carbide Burr. Double Cut Deburring 90 Degree Included. LOC 1/8" Shank OD 1/4" OAL 2" - Uncoated
• 1/4" SK Shape Carbide Burr. Single Cut Deburring 90 Degree Included. LOC 1/8" Shank OD 1/4" OAL 2" - Uncoated
• 1/8" SJ Shape Carbide Burr. Double Cut Deburring 60 Degree Included. LOC 3/32" Shank OD 1/8" OAL 1-1/2" - Uncoated
• 1/8" SJ Shape Carbide Burr. Single Cut Deburring 60 Degree Included. LOC 3/32" Shank OD 1/8" OAL 1-1/2" - Uncoated
• 1" SJ Shape Carbide Burr. Double Cut Deburring 60 Degree Included. LOC 15/16" Shank OD 1/4" OAL 2-1/2" - Uncoated
• 1" SJ Shape Carbide Burr. Single Cut Deburring 60 Degree Included. LOC 15/16" Shank OD 1/4" OAL 2-1/2" - Uncoated
• 3/4" SJ Shape Carbide Burr. Double Cut Deburring 60 Degree Included. LOC 11/16" Shank OD 1/4" OAL 2-1/2" - Uncoated
• 3/4" SJ Shape Carbide Burr. Single Cut Deburring 60 Degree Included. LOC 11/16" Shank OD 1/4" OAL 2-1/2" - Uncoated
• 5/8" SJ Shape Carbide Burr. Double Cut Deburring 60 Degree Included. LOC 9/16" Shank OD 1/4" OAL 2-3/8" - Uncoated
• 5/8" SJ Shape Carbide Burr. Single Cut Deburring 60 Degree Included. LOC 9/16" Shank OD 1/4" OAL 2-3/8" - Uncoated
• 1/2" SJ Shape Carbide Burr. Double Cut Deburring 60 Degree Included. LOC 7/16" Shank OD 1/4" OAL 2-1/4" - Uncoated
• 1/2" SJ Shape Carbide Burr. Single Cut Deburring 60 Degree Included. LOC 7/16" Shank OD 1/4" OAL 2-1/4" - Uncoated
• 3/8" SJ Shape Carbide Burr. Double Cut Deburring 60 Degree Included. LOC 5/16" Shank OD 1/4" OAL 2-1/8" - Uncoated
• 3/8" SJ Shape Carbide Burr. Single Cut Deburring 60 Degree Included. LOC 5/16" Shank OD 1/4" OAL 2-1/8" - Uncoated
• 3/16" SH Shape Carbide Burr. Double Cut Flame Shape. LOC 3/8" Shank OD 1/8" OAL 1-11/16" - Uncoated
• 3/16" SH Shape Carbide Burr. Single Cut Flame Shape. LOC 3/8" Shank OD 1/8" OAL 1-11/16" - Uncoated
• 1/8" SH Shape Carbide Burr. Double Cut Flame Shape. LOC 1/4" Shank OD 1/8" OAL 3" - Uncoated
• 1/8" SH Shape Carbide Burr. Single Cut Flame Shape. LOC 1/4" Shank OD 1/8" OAL 3" - Uncoated
• 1/8" SH Shape Carbide Burr. Double Cut Flame Shape. LOC 1/4" Shank OD 1/8" OAL 2" - Uncoated
• 1/8" SH Shape Carbide Burr. Single Cut Flame Shape. LOC 1/4" Shank OD 1/8" OAL 2" - Uncoated
• 1/8" SH Shape Carbide Burr. Double Cut Flame Shape. LOC 1/4" Shank OD 1/8" OAL 1-1/2" - Uncoated
• 1/8" SH Shape Carbide Burr. Single Cut Flame Shape. LOC 1/4" Shank OD 1/8" OAL 1-1/2" - Uncoated
• 3/4" SH Shape Carbide Burr. Double Cut Flame Shape. LOC 1-5/8" Shank OD 1/4" OAL 2-1/2" - Uncoated
• 3/4" SH Shape Carbide Burr. Single Cut Flame Shape. LOC 1-5/8" Shank OD 1/4" OAL 2-1/2" - Uncoated
• 5/8" SH Shape Carbide Burr. Double Cut Flame Shape. LOC 1-7/16" Shank OD 1/4" OAL 2-1/2" - Uncoated
• 5/8" SH Shape Carbide Burr. Single Cut Flame Shape. LOC 1-7/16" Shank OD 1/4" OAL 2-1/2" - Uncoated
• 1/2" SH Shape Carbide Burr. Double Cut Flame Shape. LOC 1-1/4" Shank OD 1/4" OAL 6-1/2" - Uncoated
• 1/2" SH Shape Carbide Burr. Single Cut Flame Shape. LOC 1-1/4" Shank OD 1/4" OAL 6-1/2" - Uncoated
• 1/2" SH Shape Carbide Burr. Double Cut Flame Shape. LOC 1-1/4" Shank OD 1/4" OAL 2-1/4" - Uncoated
• 1/2" SH Shape Carbide Burr. Single Cut Flame Shape. LOC 1-1/4" Shank OD 1/4" OAL 2-1/4" - Uncoated
• 5/16" SH Shape Carbide Burr. Double Cut Flame Shape. LOC 3/4" Shank OD 1/4" OAL 2-1/16" - Uncoated
• 5/16" SH Shape Carbide Burr. Single Cut Flame Shape. LOC 3/4" Shank OD 1/4" OAL 2-1/16" - Uncoated
• 5/16" SH Shape Carbide Burr. Double Cut Flame Shape. LOC 3/4" Shank OD 1/4" OAL 2-1/16" - Uncoated
• 5/16" SH Shape Carbide Burr. Single Cut Flame Shape. LOC 3/4" Shank OD 1/4" OAL 2-1/16" - Uncoated
• 1/4" SH Shape Carbide Burr. Double Cut Flame Shape. LOC 5/8" Shank OD 1/4" OAL 2" - Uncoated
• 1/4" SH Shape Carbide Burr. Single Cut Flame Shape. LOC 5/8" Shank OD 1/4" OAL 2" - Uncoated
• 3/16" SG Shape Carbide Burr. Double Cut Pointed Tree. LOC 1/2" Shank OD 3/16" OAL 2" - Uncoated
• 3/16" SG Shape Carbide Burr. Single Cut Pointed Tree. LOC 1/2" Shank OD 3/16" OAL 2" - Uncoated
• 3/32" SG Shape Carbide Burr. Double Cut Pointed Tree. LOC 1/4" Shank OD 3/32" OAL 1-1/2" - Uncoated
• 3/32" SG Shape Carbide Burr. Single Cut Pointed Tree. LOC 1/4" Shank OD 3/32" OAL 1-1/2" - Uncoated
• 3/16" SG Shape Carbide Burr. Double Cut Pointed Tree. LOC 1/2" Shank OD 1/8" OAL 1-11/16" - Uncoated
• 3/16" SG Shape Carbide Burr. Single Cut Pointed Tree. LOC 1/2" Shank OD 1/8" OAL 1-11/16" - Uncoated
• 1/4" SG Shape Carbide Burr. Double Cut Pointed Tree. LOC 1/2" Shank OD 1/8" OAL 1-3/4" - Uncoated
• 1/4" SG Shape Carbide Burr. Single Cut Pointed Tree. LOC 1/2" Shank OD 1/8" OAL 1-3/4" - Uncoated
• 1/8" SG Shape Carbide Burr. Double Cut Pointed Tree. LOC 1/2" Shank OD 1/8" OAL 3" - Uncoated
• 1/8" SG Shape Carbide Burr. Single Cut Pointed Tree. LOC 1/2" Shank OD 1/8" OAL 3" - Uncoated
• 1/8" SG Shape Carbide Burr. Double Cut Pointed Tree. LOC 1/2" Shank OD 1/8" OAL 2" - Uncoated
• 1/8" SG Shape Carbide Burr. Single Cut Pointed Tree. LOC 1/2" Shank OD 1/8" OAL 2" - Uncoated
• 1/8" SG Shape Carbide Burr. Double Cut Pointed Tree. LOC 1/2" Shank OD 1/8" OAL 1-1/2" - Uncoated
• 1/8" SG Shape Carbide Burr. Single Cut Pointed Tree. LOC 1/2" Shank OD 1/8" OAL 1-1/2" - Uncoated
• 1/8" SG Shape Carbide Burr. Double Cut Pointed Tree. LOC 3/8" Shank OD 1/8" OAL 1-1/2" - Uncoated
• 1/8" SG Shape Carbide Burr. Single Cut Pointed Tree. LOC 3/8" Shank OD 1/8" OAL 1-1/2" - Uncoated
• 1/8" SG Shape Carbide Burr. Double Cut Pointed Tree. LOC 5/16" Shank OD 1/8" OAL 1-1/2" - Uncoated
• 1/8" SG Shape Carbide Burr. Single Cut Pointed Tree. LOC 5/16" Shank OD 1/8" OAL 1-1/2" - Uncoated
• 1/8" SG Shape Carbide Burr. Double Cut Pointed Tree. LOC 1/4" Shank OD 1/8" OAL 1-1/2" - Uncoated
• 1/8" SG Shape Carbide Burr. Single Cut Pointed Tree. LOC 1/4" Shank OD 1/8" OAL 1-1/2" - Uncoated
• 3/4" SG Shape Carbide Burr. Double Cut Pointed Tree. LOC 1-1/2" Shank OD 1/4" OAL 2-1/2" - Uncoated
• 3/4" SG Shape Carbide Burr. Single Cut Pointed Tree. LOC 1-1/2" Shank OD 1/4" OAL 2-1/2" - Uncoated
• 1/2" SG Shape Carbide Burr. Double Cut Pointed Tree. LOC 3/4" Shank OD 1/4" OAL 2-1/4" - Uncoated
• 1/2" SG Shape Carbide Burr. Single Cut Pointed Tree. LOC 3/4" Shank OD 1/4" OAL 2-1/4" - Uncoated
• 3/4" SG Shape Carbide Burr. Double Cut Pointed Tree. LOC 1" Shank OD 1/4" OAL 2-1/2" - Uncoated
• 3/4" SG Shape Carbide Burr. Single Cut Pointed Tree. LOC 1" Shank OD 1/4" OAL 2-1/2" - Uncoated
• 5/8" SG Shape Carbide Burr. Double Cut Pointed Tree. LOC 1" Shank OD 1/4" OAL 2-3/8" - Uncoated
• 5/8" SG Shape Carbide Burr. Single Cut Pointed Tree. LOC 1" Shank OD 1/4" OAL 2-3/8" - Uncoated
• 1/2" SG Shape Carbide Burr. Double Cut Pointed Tree. LOC 1" Shank OD 1/4" OAL 6-1/2" - Uncoated
• 1/2" SG Shape Carbide Burr. Single Cut Pointed Tree. LOC 1" Shank OD 1/4" OAL 6-1/2" - Uncoated
• 1/2" SG Shape Carbide Burr. Double Cut Pointed Tree. LOC 1" Shank OD 1/4" OAL 2-1/4" - Uncoated
• 1/2" SG Shape Carbide Burr. Single Cut Pointed Tree. LOC 1" Shank OD 1/4" OAL 2-1/4" - Uncoated
• 3/8" SG Shape Carbide Burr. Double Cut Pointed Tree. LOC 3/4" Shank OD 1/4" OAL 6-3/8" - Uncoated
• 3/8" SG Shape Carbide Burr. Single Cut Pointed Tree. LOC 3/4" Shank OD 1/4" OAL 6-3/8" - Uncoated
• 3/8" SG Shape Carbide Burr. Double Cut Pointed Tree. LOC 3/4" Shank OD 1/4" OAL 2-1/8" - Uncoated
• 3/8" SG Shape Carbide Burr. Single Cut Pointed Tree. LOC 3/4" Shank OD 1/4" OAL 2-1/8" - Uncoated
• 5/16" SG Shape Carbide Burr. Double Cut Pointed Tree. LOC 3/4" Shank OD 1/4" OAL 2-1/16" - Uncoated
• 5/16" SG Shape Carbide Burr. Single Cut Pointed Tree. LOC 3/4" Shank OD 1/4" OAL 2-1/16" - Uncoated
• 1/4" SG Shape Carbide Burr. Double Cut Pointed Tree. LOC 1/2" Shank OD 1/4" OAL 6-1/4" - Uncoated