Machining TechTips / Calculators
TechTips · Milling calculator
Interactive Milling Formula Calculator
Calculate spindle speed, surface speed, feed rate, chip load, feed per revolution and metal removal rate for milling. Results update as you type, in inch or metric.
Spindle speed
—
Enter the values on the left.
FM Carbide tools matching this diameter
Shop end millsTools for this job
Dialed in your speeds and feeds? Run them on tools built for it.
How the milling formulas work
Each calculator solves one of the standard milling relationships between spindle speed, cutter diameter, surface speed, feed and the number of teeth (flutes) on the cutter. Inch formulas use surface feet per minute (SFM); metric formulas use meters per minute (m/min).
Formulas (inch)
- RPM = SFM × 12 ÷ (π × D)
- SFM = π × D × RPM ÷ 12
- IPM = RPM × IPT × Z
- IPT = IPM ÷ (RPM × Z)
- IPR = IPM ÷ RPM
- MRR (in³/min) = DOC × WOC × IPM
Formulas (metric)
- n (RPM) = Vc × 1000 ÷ (π × D)
- Vc (m/min) = π × D × n ÷ 1000
- Vf (mm/min) = n × fz × Z
- fz (mm/tooth) = Vf ÷ (n × Z)
- fn (mm/rev) = Vf ÷ n
- Q (cm³/min) = ap × ae × Vf ÷ 1000
Legend
- D Cutter diameter
- Z Number of teeth (flutes)
- SFM Surface feet per minute
- Vc Cutting speed, m/min
- RPM / n Revolutions per minute
- IPT / fz Feed per tooth
- IPM / Vf Feed per minute
- IPR / fn Feed per revolution
- DOC / ap Depth of cut
- WOC / ae Width of cut
- MRR / Q Metal removal rate
