General Information for Material Ti-5Al-2.5Fe (Tikrutan)
| Material Group |
S - Superalloys (Heat resistant and Titanium) |
| Sub-Group |
Titanium alloy |
| Tensile Strength |
1020[N/mm^2] |
| Machinability Range |
15% - 30% |
Equivalent International Designations for Material Ti-5Al-2.5Fe (Tikrutan)
Chemical Composition for Material Ti-5Al-2.5Fe (Tikrutan)
Sorry, Not Availble for this Material
Cutting Speeds Recomendations for Titanium alloys
| Application |
Vc (m/min) |
Vc (SFM) |
| Turning |
60-120 |
200-390 |
| Milling |
45-90 |
150-300 |
| Parting |
40-75 |
130-250 |
| Grooving |
55-105 |
180-340 |
| Drilling |
55-105 |
180-340 |
Important! The speed estimation is given for an ideal situation:
- Most suitable carbide grade
- Stable tool clamping
- Stable workpiece clamping
- Good quality raw material
- A short overhang of the cutting tool.
- Nominal hardness of the material.
- etc.
Recommended Carbide Grades for Material Ti-5Al-2.5Fe (Tikrutan)
Grade for Milling (Indexable)
Recommended Insert Cutting Edge Geometry for Material Ti-5Al-2.5Fe (Tikrutan)
| Honing Size |
0.02-0.05 mm / 0.001-0.002" |
| Rake Angle |
13° -18° |
| Land Angle |
Neutral |
| Land Width |
0.10-0.20 mm / 0.004-0.008" |
| Ground Insert |
Recommended |
