Machining TechTips / Threading / TPI converter
TechTips · Thread pitch converter
TPI to Pitch Converter
Type a TPI or a pitch and get the other two values at once. The converter also tells you which standard threads use that pitch and which threading inserts cut it.
Pitch
1.270 mm
- Threads per inch
- 20
- Pitch in inches
- 0.05000
- Pitch in mm
- 1.270
Threading inserts that cut this pitch
TPI and pitch conversion chart
Inch threads and metric threads side by side, with the standards that use each pitch and the inserts we carry for it.
| TPI | Pitch (in) | Pitch (mm) | Used on | Inserts |
|---|---|---|---|---|
| 127 | 0.00787 | 0.200 | ||
| 120 | 0.00833 | 0.212 | ||
| 112 | 0.00893 | 0.227 | ||
| 101.60 | 0.00984 | 0.250 | ISO M1, M1.2 coarse | |
| 100 | 0.01000 | 0.254 | ||
| 96 | 0.01042 | 0.265 | ||
| 90 | 0.01111 | 0.282 | ||
| 84.67 | 0.01181 | 0.300 | ISO M1.4 coarse | ISO 0.30 mm |
| 80 | 0.01250 | 0.318 | UN 0-80 | |
| 72.57 | 0.01378 | 0.350 | ISO M1.6 coarse | ISO 0.35 mm |
| 72 | 0.01389 | 0.353 | UN 1-72 | |
| 64 | 0.01563 | 0.397 | UN 1-64, 2-64 | |
| 63.50 | 0.01575 | 0.400 | ISO M2 coarse | ISO 0.40 mm |
| 60 | 0.01667 | 0.423 | ||
| 56.44 | 0.01772 | 0.450 | ISO M2.5 coarse | ISO 0.45 mm |
| 56 | 0.01786 | 0.454 | UN 2-56, 3-56 | |
| 50.80 | 0.01969 | 0.500 | ISO M3 coarse | ISO 0.50 mm60° A60 |
| 48 | 0.02083 | 0.529 | UN 3-48, 4-48 | 60° A60 |
| 44 | 0.02273 | 0.577 | UN 5-44 | 60° A60 |
| 42.33 | 0.02362 | 0.600 | ISO M3.5 coarse | ISO 0.60 mm60° A60 |
| 40 | 0.02500 | 0.635 | UN 4-40, 5-40, 6-40 | Whitworth 4060° A60 |
| 36.29 | 0.02756 | 0.700 | ISO M4 coarse | ISO 0.70 mm60° A60 |
| 36 | 0.02778 | 0.706 | UN 8-36 | 60° A60 |
| 34 | 0.02941 | 0.747 | 60° A60 | |
| 33.87 | 0.02953 | 0.750 | ISO 0.75 mm60° A60 | |
| 32 | 0.03125 | 0.794 | UN 6-32, 8-32, 10-32 | Whitworth 3260° A60 |
| 31.75 | 0.03150 | 0.800 | ISO M5 coarse | ISO 0.80 mm60° A60 |
| 30 | 0.03333 | 0.847 | 60° A60 | |
| 28.22 | 0.03543 | 0.900 | 60° A60 | |
| 28 | 0.03571 | 0.907 | UN 12-28, 1/4-28; BSP 1/16, 1/8 | Whitworth 2860° A60 |
| 27 | 0.03704 | 0.941 | NPT 1/16, 1/8 | 60° A60 |
| 26 | 0.03846 | 0.977 | Whitworth 2660° A60 | |
| 25.40 | 0.03937 | 1.000 | ISO M6 coarse | ISO 1.00 mm60° A60 |
| 24 | 0.04167 | 1.058 | UN 10-24, 12-24, 5/16-24, 3/8-24 | Whitworth 2460° A60 |
| 22 | 0.04545 | 1.155 | Whitworth 2260° A60 | |
| 20.32 | 0.04921 | 1.250 | ISO M8 coarse | ISO 1.25 mm60° A60 |
| 20 | 0.05000 | 1.270 | UN 1/4-20, 7/16-20, 1/2-20 | Whitworth 2060° A60 |
| 19 | 0.05263 | 1.337 | BSP 1/4, 3/8 | Whitworth 1960° A60 |
| 18 | 0.05556 | 1.411 | UN 5/16-18, 9/16-18, 5/8-18; NPT 1/4, 3/8 | Whitworth 1860° A60 |
| 16.93 | 0.05906 | 1.500 | ISO M10 coarse | ISO 1.50 mm60° A60 |
| 16 | 0.06250 | 1.588 | UN 3/8-16, 3/4-16 | Whitworth 1660° A60 |
| 14.51 | 0.06890 | 1.750 | ISO M12 coarse | ISO 1.75 mm60° G60 |
| 14 | 0.07143 | 1.814 | UN 7/16-14, 7/8-14; NPT 1/2, 3/4; BSP 1/2 to 7/8 | Whitworth 1460° G60 |
| 13 | 0.07692 | 1.954 | UN 1/2-13 | 60° G60 |
| 12.70 | 0.07874 | 2.000 | ISO M14, M16 coarse | ISO 2.00 mm60° G60 |
| 12 | 0.08333 | 2.117 | UN 9/16-12, 1-12, 1 1/8-12, 1 1/4-12 +2 | Whitworth 1260° G60 |
| 11.5 | 0.08696 | 2.209 | NPT 1 to 2 | 60° G60 |
| 11 | 0.09091 | 2.309 | UN 5/8-11; BSP 1 and up | Whitworth 1160° G60 |
| 10.16 | 0.09843 | 2.500 | ISO M18, M20, M22 coarse | ISO 2.50 mm60° G60 |
| 10 | 0.10000 | 2.540 | UN 3/4-10 | Whitworth 1060° G60 |
| 9 | 0.11111 | 2.822 | UN 7/8-9 | Whitworth 960° G60 |
| 8.47 | 0.11811 | 3.000 | ISO M24, M27 coarse | ISO 3.00 mm60° G60 |
| 8 | 0.12500 | 3.175 | UN 1-8; NPT 2 1/2 and up | Whitworth 860° G60 |
| 7.26 | 0.13780 | 3.500 | ISO M30, M33 coarse | ISO 3.50 mm60° N60 |
| 7 | 0.14286 | 3.629 | UN 1 1/8-7, 1 1/4-7 | Whitworth 760° N60 |
| 6.35 | 0.15748 | 4.000 | ISO M36, M39 coarse | ISO 4.00 mm60° N60 |
| 6 | 0.16667 | 4.233 | UN 1 3/8-6, 1 1/2-6 | Whitworth 660° N60 |
| 5.64 | 0.17717 | 4.500 | ISO M42, M45 coarse | ISO 4.50 mm60° N60 |
| 5.08 | 0.19685 | 5.000 | ISO M48, M52 coarse | ISO 5.00 mm60° N60 |
| 5 | 0.20000 | 5.080 | UN 1 3/4-5 | Whitworth 560° N60 |
| 4.62 | 0.21654 | 5.500 | ISO M56, M60 coarse | ISO 5.50 mm |
| 4.5 | 0.22222 | 5.644 | UN 2-4 1/2 | Whitworth 4.5 |
| 4.23 | 0.23622 | 6.000 | ISO M64 coarse | ISO 6.00 mm |
| 4 | 0.25000 | 6.350 | Whitworth 4 | |
| 3 | 0.33333 | 8.467 | ||
| 2 | 0.50000 | 12.700 |
Saw blades: teeth in the cut
On a band saw or hacksaw blade, TPI counts teeth instead of threads. The common shop rule is to keep at least three teeth in the material: fewer and the teeth snag on thin walls, many more and the gullets pack with chips.
Cut the thread
Single-point it on the lathe, mill it, or tap it. We stock the tooling for all three.
TPI, pitch and how they connect
Pitch is the distance from one thread crest (or one saw tooth) to the next. TPI counts how many of them fit in one inch, so the two are simply inverses of each other.
- TPI = 1 ÷ pitch in inches = 25.4 ÷ pitch in mm
- Pitch in inches = 1 ÷ TPI
- Pitch in mm = 25.4 ÷ TPI
Close is not the same
Some inch and metric pitches look almost identical. 16 TPI is 1.588 mm, and the M10 coarse pitch is 1.5 mm. That 6% gap adds up over every thread, so a 16 TPI bolt will bind in a 1.5 mm nut after only a few turns. Match the standard, not just the number.
Coarse and fine
A lower TPI means a coarser thread: faster to assemble and more tolerant of dirt and damage. A higher TPI is finer: more threads per inch of engagement, better for thin walls and adjustments, and more resistant to loosening under vibration.
