Search results for "CN 64"

A32V-MCLNR6 Boring Bar 95° Lead Angle CN 64 Insert

$386.79

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...

MCGNL206D Tool Holder 90° Lead Angle CN 64 Insert

$103.97

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MCMNN246D Tool Holder 50° Lead Angle CN 64 Insert

$118.45

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

S40V-MCLNL6 Boring Bar 95° Lead Angle CN 64 Insert

$402.89

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...

S32V-MCLNR6 Boring Bar 95° Lead Angle CN 64 Insert

$336.39

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...

S32V-MCLNL6 Boring Bar 95° Lead Angle CN 64 Insert

$336.39

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...

MCRNR246D Tool Holder 75° Lead Angle CN 64 Insert

$118.45

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

DCLNR206DAN Tool Holder 95° Lead Angle CN 64 Insert

$158.09

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MCKNL246D Tool Holder 75° Lead Angle CN 64 Insert

$118.45

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

DCLNL246EAN Tool Holder 95° Lead Angle CN 64 Insert

$186.19

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MCRNL206D Tool Holder 75° Lead Angle CN 64 Insert

$103.97

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

DCLNR206DN Tool Holder 95° Lead Angle CN 64 Insert

$103.35

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MCGNR206D Tool Holder 90° Lead Angle CN 64 Insert

$103.97

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MCGNL246D Tool Holder 90° Lead Angle CN 64 Insert

$118.45

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MCKNR206D Tool Holder 75° Lead Angle CN 64 Insert

$103.97

Face turning toolholder equipped with rhombic negative double-sided inserts (angle 80°) with strong cutting edge. The double clamping (pin + clamp) ensures good rigidity and stability in roughing applications. Specifications Model: MCKNR206D Shank height (A): 1.250" Shank width (B): 1.250" Overall length (C): 6.00" Head length (D): 1.470" Dimension F:...

DCLNL206DN Tool Holder 95° Lead Angle CN 64 Insert

$103.35

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MCRNR206D Tool Holder 75° Lead Angle CN 64 Insert

$103.97

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

WCLNR206D Tool Holder 95° Lead Angle CN 64 Insert

$103.97

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MCKNR166D Tool Holder 75° Lead Angle CN 64 Insert

$94.61

Face turning toolholder equipped with rhombic negative double-sided inserts (angle 80°) with strong cutting edge. The double clamping (pin + clamp) ensures good rigidity and stability in roughing applications. Specifications Model: MCKNR166D Shank height (A): 1.000" Shank width (B): 1.000" Overall length (C): 6.00" Head length (D): 1.470" Dimension F:...

MCFNR166D Tool Holder 90° Lead Angle CN 64 Insert

$94.61

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

WCLNR166D Tool Holder 95° Lead Angle CN 64 Insert

$94.61

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MCLNL246E Tool Holder 95° Lead Angle CN 64 Insert

$118.45

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MCRNL246D Tool Holder 75° Lead Angle CN 64 Insert

$118.45

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MCLNR246E Tool Holder 95° Lead Angle CN 64 Insert

$118.45

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MCFNL206D Tool Holder 90° Lead Angle CN 64 Insert

$103.97

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MCFNR246D Tool Holder 90° Lead Angle CN 64 Insert

$118.45

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MCLNR246D Tool Holder 95° Lead Angle CN 64 Insert

$118.45

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

DCLNR246EN Tool Holder 95° Lead Angle CN 64 Insert

$163.74

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MCKNL206D Tool Holder 75° Lead Angle CN 64 Insert

$103.97

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MCKNL166D Tool Holder 75° Lead Angle CN 64 Insert

$94.61

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MCFNL246D Tool Holder 90° Lead Angle CN 64 Insert

$118.45

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

DCLNL246EN Tool Holder 95° Lead Angle CN 64 Insert

$163.74

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

S40V-MCLNR6 Boring Bar 95° Lead Angle CN 64 Insert

$402.89

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...

4-Flute SE 30°H NC REG HSS (CN = TiCN-PG) - 63/64 X 1 X 2 X 4-1/2

$53.84

($53.84 / item)

4-Flute SE 30°H NC REG HSS (CN = TiCN-PG) Dimensions: 63/64 X 1 X 2 X 4-1/2 Item: SF-31WCN

MCGNR246D Tool Holder 90° Lead Angle CN 64 Insert

$118.45

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

A32V-MCLNL6 Boring Bar 95° Lead Angle CN 64 Insert

$386.79

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...

DCLNR246EAN Tool Holder 95° Lead Angle CN 64 Insert

$186.19

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

WCLNR246D Tool Holder 95° Lead Angle CN 64 Insert

$118.45

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MCFNR206D Tool Holder 90° Lead Angle CN 64 Insert

$103.97

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

4-Flute SE 30°H NC REG HSS (CN = TiCN-PG) - 49/64 X 3/4 X 1-7/8 X 4-1/8

$47.58

($47.58 / item)

4-Flute SE 30°H NC REG HSS (CN = TiCN-PG) Dimensions: 49/64 X 3/4 X 1-7/8 X 4-1/8 Item: SF-24WCN

DCLNL206DAN Tool Holder 95° Lead Angle CN 64 Insert

$158.09

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

2-Flute DE 30°H CC REG MINI HSS (CN = TiCN-PG) - 3/64 X 3/16 X 5/32 X 2-1/4

$13.72

($13.72 / item)

2-Flute DE 30°H CC REG MINI HSS (CN = TiCN-PG) Dimensions: 3/64 X 3/16 X 5/32 X 2-1/4 Item: DCS-1ACN

4-Flute SE 30°H NC REG HSS (CN = TiCN-PG) - 55/64 X 7/8 X 1-7/8 X 4-1/8

$48.24

($48.24 / item)

4-Flute SE 30°H NC REG HSS (CN = TiCN-PG) Dimensions: 55/64 X 7/8 X 1-7/8 X 4-1/8 Item: SF-27WCN

MCLNL246D Tool Holder 95° Lead Angle CN 64 Insert

$118.45

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

2-Flute SE 30°H CC REG HSS (CN = TiCN-PG) - 55/64 X 7/8 X 1-1/2 X 3-3/4

$45.48

($45.48 / item)

2-Flute SE 30°H CC REG HSS (CN = TiCN-PG) Dimensions: 55/64 X 7/8 X 1-1/2 X 3-3/4 Item: SG-27WCN

4-Flute DE 30°H NC REG HSS (CN = TiCN-PG) - 29/64 X 1/2 X 1 X 4-1/8

$26.52

($26.52 / item)

4-Flute DE 30°H NC REG HSS (CN = TiCN-PG) Dimensions: 29/64 X 1/2 X 1 X 4-1/8 Item: DB-14ACN

MCLNR856D Tool Holder 95° Lead Angle CN 64 Insert

$103.97

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

2-Flute SE 30°H BN REG MINI COB (CN = TiCN-PG) - 9/64 X 3/16 X 13/32 X 1-1/8

$13.38

($13.38 / item)

2-Flute SE 30°H BN REG MINI COB (CN = TiCN-PG) Dimensions: 9/64 X 3/16 X 13/32 X 1-1/8 Item: FR-4ACN

4-Flute DE 30°H NC REG HSS (CN = TiCN-PG) - 9/64 X 3/16 X 13/32 X 2-1/4

$12.39

($12.39 / item)

4-Flute DE 30°H NC REG HSS (CN = TiCN-PG) Dimensions: 9/64 X 3/16 X 13/32 X 2-1/4 Item: DBS-4ACN