Search results for "rc 08"

SRDCN082 Tool Holder RC 08 Insert

$49.94

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MTJNR 08-2A Tool Holder 3 Side Cutting Edge Angle for Negative Triangle TNM_Inserts

$75.00 $121.50

MTJNR 08-2A — toolholder, 0.500" square shank, 4.0" overall length. Made in the USA by RMC Tooling. 3°Side Cutting Edge Angle for Negative Triangle TNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool goes...

MSRNL 08-3B Tool Holder 15 Side Cutting Edge Angle for Negative Square SNM_Inserts

$107.58 $191.50

MSRNL 08-3B — toolholder, 0.500" square shank, 4.5" overall length. Made in the USA by RMC Tooling. 15° Side Cutting Edge Angle for Negative Square SNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...

MRGNR 08-3A Tool Holder 0 Side Cutting Edge Angle for Negative Round RNM_Inserts

$86.12 $139.52

MRGNR 08-3A — toolholder, 0.500" square shank, 4.0" overall length. Made in the USA by RMC Tooling. 0° Side Cutting Edge Angle for Negative Round RNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...

MTANR 08-2A Tool Holder 0 Side Cutting Edge Angle for Negative Triangle TNM_Inserts

$62.92 $78.65

MTANR 08-2A — toolholder, 0.500" square shank, 4.0" overall length. Made in the USA by RMC Tooling. 0° Side Cutting Edge Angle for Negative Triangle TNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...

MCLNR 08-3A Tool Holder -5 End Cutting Edge Angle for Negative 80 Diamond CNM_ Inserts

$84.98 $137.66

MCLNR 08-3A — toolholder, 0.500" square shank, 4.0" overall length. Made in the USA by RMC Tooling. -5° End or Side Cutting Edge Angle for Negative 80° Diamond CNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface,...

STVOR 08-3A Tool Holder O.D. Threading & Shallow Grooving for Triangle TNMC Inserts

$72.58 $90.73

STVOR 08-3A — toolholder, 0.500" square shank, 4.0" overall length. Made in the USA by RMC Tooling. O.D. Threading & Shallow Grooving for Triangle TNMC Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool goes...

MSRNR 08-3A Tool Holder 15 Side Cutting Edge Angle for Negative Square SNM_Inserts

$83.38 $104.22

MSRNR 08-3A — toolholder, 0.500" square shank, 4.0" overall length. Made in the USA by RMC Tooling. 15° Side Cutting Edge Angle for Negative Square SNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...

MSSNR 08-3BTool Holder 45 Side Cutting Edge Angle for Negative Square SNM_Inserts

$83.38 $104.22

MSSNR 08-3B — toolholder, 0.50" square shank, 4.5" overall length. Made in the USA by RMC Tooling. 45° Side Cutting Edge Angle for Negative Square SNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...

MTGNL 08-2A Tool Holder 0 Side Cutting Edge Angle for Negative Triangle TNM_Inserts

$75.00 $121.50

MTGNL 08-2A — toolholder, 0.500" square shank, 4.0" overall length. Made in the USA by RMC Tooling. 0° Side Cutting Edge Angle for Negative Triangle TNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...

MTANL 08-2A Tool Holder 0 Side Cutting Edge Angle for Negative Triangle TNM_Inserts

$82.53 $133.70

MTANL 08-2A — toolholder, 0.500" square shank, 4.0" overall length. Made in the USA by RMC Tooling. 0° Side Cutting Edge Angle for Negative Triangle TNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...

MDJNR 08-3A Tool Holder 3 Side Cutting Edge Angle for Negative 55 Diamond CNM_Inserts

$109.26 $177.00

MDJNR 08-3A — toolholder, 0.500" square shank, 4.0" overall length. Made in the USA by RMC Tooling. 3° Side Cutting Edge Angle for Negative 55° Diamond DNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the...

MSRNR 08-3B Tool Holder 15 Side Cutting Edge Angle for Negative Square SNM_Inserts

$129.01 $209.00

MSRNR 08-3B — toolholder, 0.500" square shank, 4.5" overall length. Made in the USA by RMC Tooling. 15° Side Cutting Edge Angle for Negative Square SNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...

MSKNL 08-3A Tool Holder 15 End Cutting Edge Angle for Negative Square SNM_Inserts

$72.83 $117.98

MSKNL 08-3A — toolholder, 0.500" square shank, 4.0" overall length. Made in the USA by RMC Tooling. 15° End Cutting Edge Angle for Negative Square SNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...

STVOL 08-3A Tool Holder O.D. Threading & Shallow Grooving for Triangle TNMC Inserts

$72.58 $90.73

STVOL 08-3A — toolholder, 0.500" square shank, 4.0" overall length. Made in the USA by RMC Tooling. O.D. Threading & Shallow Grooving for Triangle TNMC Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool goes...

MRGNL 08-3A Tool Holder 0 Side Cutting Edge Angle for Negative Round RNM_Inserts

$86.12 $139.52

MRGNL 08-3A — toolholder, 0.500" square shank, 4.0" overall length. Made in the USA by RMC Tooling. 0° Side Cutting Edge Angle for Negative Round RNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...

MSDNN 08-3B Tool Holder 45 Side Cutting Edge Angle for Negative Square SNM_Inserts

$69.25 $112.18

MSDNN 08-3B — toolholder, 0.500" square shank, 4.5" overall length. Made in the USA by RMC Tooling. 45° Side Cutting Edge Angle for Negative Square SNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...

MCLNL 08-3A Tool Holder -5 End Cutting Edge Angle for Negative 80 Diamond CNM_ Inserts

$84.98 $137.66

MCLNL 08-3A — toolholder, 0.500" square shank, 4.0" overall length. Made in the USA by RMC Tooling. -5° End or Side Cutting Edge Angle for Negative 80° Diamond CNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface,...

MTCNN 08-3A Tool Holder 0° End Cutting Edge Angle for Negative Triangle TNM_Inserts

$52.38 $65.47

MTCNN 08-3A — toolholder, 0.50" square shank, 4.0" overall length. Made in the USA by RMC Tooling. 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...

MSSNL 08-3B Tool Holder 45 Side Cutting Edge Angle for Negative Square SNM_Inserts

$83.38 $104.22

MSSNL 08-3B — toolholder, 0.50" square shank, 4.5" overall length. Made in the USA by RMC Tooling. 45° Side Cutting Edge Angle for Negative Square SNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...

MSSNR 08-3ATool Holder 45 Side Cutting Edge Angle for Negative Square SNM_Inserts

$83.38 $104.22

MSSNR 08-3A — toolholder, 0.50" square shank, 4.0" overall length. Made in the USA by RMC Tooling. 45° Side Cutting Edge Angle for Negative Square SNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...

MTRNR 08-2A Tool Holder 15 DEGREE Side Cutting Edge Angle for Negative Triangle TNM_Inserts

$62.92 $78.65

MTRNR 08-2A — toolholder, 0.500" square shank, 4.0" overall length. Made in the USA by RMC Tooling. 15° Side Cutting Edge Angle for Negative Triangle TNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...

MSRNL 08-3A Tool Holder 15 Side Cutting Edge Angle for Negative Square SNM_Inserts

$83.38 $104.22

MSRNL 08-3A — toolholder, 0.500" square shank, 4.0" overall length. Made in the USA by RMC Tooling. 15° Side Cutting Edge Angle for Negative Square SNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...

MTCNN 08-3B Tool Holder 0 Degree End Cutting Edge Angle for Negative Triangle TNM_Inserts

$52.38 $65.47

MTCNN 08-3B — toolholder, 0.50" square shank, 4.5" overall length. Made in the USA by RMC Tooling. 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...

MTENN 08-2A Tool Holder 30 Degree Side Cutting Edge Angle for Negative Triangle TNM_Inserts

$75.04 $121.56

MTENN 08-2A — toolholder, 0.500" square shank, 4.0" overall length. Made in the USA by RMC Tooling. 30° Side Cutting Edge Angle for Negative Triangle TNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...

MSKNR 08-3A Tool Holder 15 End Cutting Edge Angle for Negative Square SNM_Inserts

$72.83 $117.98

MSKNR 08-3A — toolholder, 0.500" square shank, 4.0" overall length. Made in the USA by RMC Tooling. 15° End Cutting Edge Angle for Negative Square SNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...

MTRNL 08-2A Tool Holder 15 DEGREE Side Cutting Edge Angle for Negative Triangle TNM_Inserts

$62.92 $78.65

MTRNL 08-2A — toolholder, 0.500" square shank, 4.0" overall length. Made in the USA by RMC Tooling. 15° Side Cutting Edge Angle for Negative Triangle TNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...

MTFNR 08-2A Tool Holder 0 End Cutting Edge Angle for Negative Triangle TNM_Inserts

$89.07 $144.30

MTFNR 08-2A — toolholder, 0.500" square shank, 4.0" overall length. Made in the USA by RMC Tooling. 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...

MSKNR 08-3B Tool Holder 15 End Cutting Edge Angle for Negative Square SNM_Inserts

$62.92 $78.65

MSKNR 08-3B — toolholder, 0.500" square shank, 4.5" overall length. Made in the USA by RMC Tooling. 15° End Cutting Edge Angle for Negative Square SNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...

MDJNL 08-3A Tool Holder 3 Side Cutting Edge Angle for Negative 55 Diamond CNM_Inserts

$104.05 $130.06

MDJNL 08-3A — toolholder, 0.500" square shank, 4.0" overall length. Made in the USA by RMC Tooling. 3° Side Cutting Edge Angle for Negative 55° Diamond DNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the...

MTJNL 08-2A Tool Holder 3 Side Cutting Edge Angle for Negative Triangle TNM_Inserts

$75.00 $121.50

MTJNL 08-2A — toolholder, 0.500" square shank, 4.0" overall length. Made in the USA by RMC Tooling. 3°Side Cutting Edge Angle for Negative Triangle TNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool goes...

MSSNL 08-3A Tool Holder 45 Side Cutting Edge Angle for Negative Square SNM_Inserts

$83.38 $104.22

MSSNL 08-3A — toolholder, 0.50" square shank, 4.0" overall length. Made in the USA by RMC Tooling. 45° Side Cutting Edge Angle for Negative Square SNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...

MTGNR 08-2A Tool Holder 0 Side Cutting Edge Angle for Negative Triangle TNM_Inserts

$75.00 $121.50

MTGNR 08-2A — toolholder, 0.500" square shank, 4.0" overall length. Made in the USA by RMC Tooling. 0° Side Cutting Edge Angle for Negative Triangle TNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...

MSDNN 08-3A Tool Holder 45 Side Cutting Edge Angle for Negative Square SNM_Inserts

$69.25 $112.18

MSDNN 08-3A — toolholder, 0.500" square shank, 4.0" overall length. Made in the USA by RMC Tooling. 45° Side Cutting Edge Angle for Negative Square SNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...

MTFNL 08-2A Tool Holder 0 End Cutting Edge Angle for Negative Triangle TNM_Inserts

$62.92 $78.65

MTFNL 08-2A — toolholder, 0.500" square shank, 4.0" overall length. Made in the USA by RMC Tooling. 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...

NSR 08-2J Indexable Tool Holder for CNC Turning

$109.26 $177.00

NSR 08-2J — toolholder, 0.500" square shank, 3.5" overall length. Made in the USA by RMC Tooling. External Toolholder for Threading & Grooving NG Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool goes back...

SCJCR 08-3A Indexable Tool Holder for CNC Turning

$106.10 $171.88

SCJCR 08-3A — toolholder, 1/2" square shank, 4.0" overall length. Made in the USA by RMC Tooling. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool goes back into the turret at the same cutting-point location...

MSKNL 08-3B Tool Holder 15 End Cutting Edge Angle for Negative Square SNM_Inserts

$62.92 $78.65

MSKNL 08-3B — toolholder, 0.500" square shank, 4.5" overall length. Made in the USA by RMC Tooling. 15° End Cutting Edge Angle for Negative Square SNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...

SVJCR 08-2A Indexable Tool Holder for CNC Turning

$133.56 $216.36

SVJCR 08-2A — toolholder, 0.500" square shank, 4.0" overall length. Made in the USA by RMC Tooling. -3° Side Cutting Edge Angle for 7° Positive 35° Diamond VC_T Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so...

SDJCR 08-3A Indexable Tool Holder for CNC Turning

$106.10 $171.88

SDJCR 08-3A — toolholder, 0.500" square shank, 4.0" overall length. Made in the USA by RMC Tooling. -3° Side Cutting Edge Angle for 7° Positive 55° Diamond DC_T Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so...

TBR 08-2 Indexable Tool Holder for CNC Turning

$69.25 $112.18

TBR 08-2 — toolholder, 1/2" square shank. Made in the USA by RMC Tooling. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool goes back into the turret at the same cutting-point location every time it...

SDJCR 08-2 Indexable Tool Holder for CNC Turning

$95.20 $154.22

SDJCR 08-2 — toolholder, 1/2" square shank. Made in the USA by RMC Tooling. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool goes back into the turret at the same cutting-point location every time it...

SDJCR 08-3C Indexable Tool Holder for CNC Turning

$106.10 $171.88

SDJCR 08-3C — toolholder, 1/2" square shank, 5.0" overall length. Made in the USA by RMC Tooling. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool goes back into the turret at the same cutting-point location...

SCLCR 08-3A Indexable Tool Holder for CNC Turning

$75.00 $121.50

SCLCR 08-3A — toolholder, 0.500" square shank, 4.0" overall length. Made in the USA by RMC Tooling. -5° End or Side Cutting Edge Angle for 7° Positive 80° Diamond CC_T Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference...

SISCLCR 08-2 Indexable Boring Bar for CNC Turning

$103.47 $167.62

SISCLCR 08-2 — boring bar, 0.500" bar diameter, 0.602" minimum bore, 6.00" overall length. Made in the USA by RMC Tooling. -5° End & Side Cutting Edge Angle for 7° Positive 80°Diamond CC_T Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable...

STGCR 08-3B Indexable Tool Holder for CNC Turning

$96.65 $156.58

STGCR 08-3B — toolholder, 1/2" square shank, 4.5" overall length. Made in the USA by RMC Tooling. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool goes back into the turret at the same cutting-point location...

SISCLCR 08-3 Indexable Boring Bar for CNC Turning

$109.26 $177.00

SISCLCR 08-3 — boring bar, 0.500" bar diameter, 0.625" minimum bore, 6.00" overall length. Made in the USA by RMC Tooling. -5° End & Side Cutting Edge Angle for 7° Positive 80°Diamond CC_T Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable...

SCLCR 08-2J Indexable Tool Holder for CNC Turning

$95.49 $154.70

SCLCR 08-2J — toolholder, 0.500" square shank, 3.5" overall length. Made in the USA by RMC Tooling. -5° End or Side Cutting Edge Angle for 7° Positive 80° Diamond CC_T Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference...

STGCR 08-2J Indexable Tool Holder for CNC Turning

$75.04 $121.56

STGCR 08-2J — toolholder, 0.500" square shank, 3.5" overall length. Made in the USA by RMC Tooling. 0° Side Cutting Edge Angle for 7° Positive Triangle TCMT Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the...

STFCR 08-2J Indexable Tool Holder for CNC Turning

$77.90 $126.20

STFCR 08-2J — toolholder, 0.500" square shank, 3.5" overall length. Made in the USA by RMC Tooling. 0° End Cutting Edge Angle for 7° Positive Triangle TCMT Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the...