FM CARBIDE · TOOL FINDER

Search results

265 results

MTENNS246E Tool Holder — Canela, FM Carbide

MTENNS246E Tool Holder 60° Lead Angle TNM 66 Insert

$118.45 each

Copying toolholder equipped with triangular negative double-sided inserts with strong cutting edges. Copying toolholder for general applications, roughing, semi-finishing and finishing. Specifications Model: MTENNS246E Shank height (A): 1.500" Shank width (B): 1.500" Overall length (C): 7.00" Head length (D): 2.086" Insert: TNM..66.. Weight: 6.615 lb Brand: Canela Dimensions and weight...
MTGNR865D Tool Holder — Canela, FM Carbide

MTGNL246E Tool Holder 90° Lead Angle TNM 66 Insert

$118.45 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
MTGNR865D Tool Holder — Canela, FM Carbide

MTGNR246E Tool Holder 90° Lead Angle TNM 66 Insert

$118.45 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
Canela ITSN-637 triangular shim seat — dimensions diagram from the Canela spare-parts catalog

ITSN-637 Triangular Shim Seat — 1.143" × 0.187" thick

$18.74 each

Canela reference ITSN-637 — triangular shim seat. Original carbide shim seat for Canela indexable turning toolholders. The seat takes the cutting load and protects the pocket, so a chipped insert does not scrap the tool. Sold individually, no minimum order.Specifications Reference: ITSN-637 Part type: Triangular Shim Seat Thickness (b): 0.187"...
PTTNR20CA-22 Cartridge — Canela, FM Carbide

PTTNL12CA-16 Cartridge 60° Lead Angle TNMG 33 Insert

$184.03 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: PTTNL12CA-16 Dimension D: 1.969" Length (L): 2.165" Length (L1): 1.378" Width (b): 0.630" Dimension...
PTTNR20CA-22 Cartridge — Canela, FM Carbide

PTTNL16CA-16 Cartridge 60° Lead Angle TNMG 33 Insert

$184.03 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: PTTNL16CA-16 Dimension D: 2.362" Length (L): 2.480" Length (L1): 1.496" Width (b): 0.787" Dimension...
PTTNR20CA-22 Cartridge — Canela, FM Carbide

PTTNR12CA-16 Cartridge 60° Lead Angle TNMG 33 Insert

$184.03 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: PTTNR12CA-16 Dimension D: 1.969" Length (L): 2.165" Length (L1): 1.378" Width (b): 0.630" Dimension...
PTTNR20CA-22 Cartridge — Canela, FM Carbide

PTTNR16CA-16 Cartridge 60° Lead Angle TNMG 33 Insert

$184.03 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: PTTNR16CA-16 Dimension D: 2.362" Length (L): 2.480" Length (L1): 1.496" Width (b): 0.787" Dimension...
PTTNR20CA-22 Cartridge — Canela, FM Carbide

PTTNL20CA-22 Cartridge 60° Lead Angle TNMG 43 Insert

$201.68 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: PTTNL20CA-22 Dimension D: 2.756" Length (L): 2.756" Length (L1): 1.575" Width (b): 0.787" Dimension...
SIMTJNR Boring Bar

SIMTJNR 16-3 -3° End Cutting Edge Angle for Negative Triangle TNM_ Inserts

$259.63 each

SIMTJNR 16-3 — boring bar, 1.00" bar diameter, 1.280" minimum bore, 12.0" overall length. Made in the USA by RMC Tooling. -3° End Cutting Edge Angle for Negative Triangle TNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a...
SIMTFNR Boring Bar

SIMTFNR 40-6 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts

$432.70 each

SIMTFNR 40-6 — boring bar, 2.50" bar diameter, 3.062" minimum bore, 16.0" overall length. Made in the USA by RMC Tooling. 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a...
DTGNR204DN Tool Holder — Canela, FM Carbide

DTGNL164DN Tool Holder 90° Lead Angle TNM 43 Insert

$82.22 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
SIMTJNL Boring Bar

SIMTJNL 16-3 -3° End Cutting Edge Angle for Negative Triangle TNM_ Inserts

$259.63 each

SIMTJNL 16-3 — boring bar, 1.00" bar diameter, 1.280" minimum bore, 12.0" overall length. Made in the USA by RMC Tooling. -3° End Cutting Edge Angle for Negative Triangle TNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a...
MTCNN664F Tool Holder — Canela, FM Carbide

MTCNN664F Tool Holder 90° Lead Angle TNM 43 Insert

$220.41 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
MTENNS 16-3D Tool Holder — Canela, FM Carbide

MTEN NS 16-3D Tool Holder 60° End Cutting Edge Angle TNM__33__ Insert

$79.05 each

Neutral Hand Tool Holder MTENNS 16-3D - OAL = 6" - A = 1"Copying toolholder equipped with triangular negative double-sided inserts with strong cutting edges. Copying toolholder for general applications, roughing, semi-finishing and finishing. Specifications Model: MTENNS 16-3D Shank height (A): 1.000" Shank width (B): 1.000" Overall length (C): 6.00"...
PTTNR20CA-22 Cartridge — Canela, FM Carbide

PTTNR20CA-22 Cartridge 60° Lead Angle TNMG 43 Insert

$201.68 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: PTTNR20CA-22 Dimension D: 2.756" Length (L): 2.756" Length (L1): 1.575" Width (b): 0.787" Dimension...
MTUN cartridge - Canela, FM Carbide

MTUNL16CA-3C Cartridge 93° Lead Angle TNMG 33 Insert

$154.92 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MTUNL16CA-3C Dimension D: 2.362" Length (L): 2.480" Length (L1): 1.497" Width (b): 0.787" Dimension...
PTGNR20CA-22 Cartridge — Canela, FM Carbide

PTGNL16CA-16 Cartridge 90° Lead Angle TNMG 33 Insert

$184.03 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: PTGNL16CA-16 Dimension D: 2.362" Length (L): 2.480" Length (L1): 1.496" Width (b): 0.787" Dimension...
PTGNR20CA-22 Cartridge — Canela, FM Carbide

PTGNL12CA-16 Cartridge 90° Lead Angle TNMG 33 Insert

$184.03 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: PTGNL12CA-16 Dimension D: 1.969" Length (L): 2.165" Length (L1): 1.378" Width (b): 0.630" Dimension...
MTUN cartridge - Canela, FM Carbide

MTUNR16CA-3C Cartridge 93° Lead Angle TNMG 33 Insert

$154.92 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MTUNR16CA-3C Dimension D: 2.362" Length (L): 2.480" Length (L1): 1.497" Width (b): 0.787" Dimension...
MTJNLS 16-4D Tool Holder — Canela, FM Carbide

MTJNLS 16-4D Tool Holder 93° End Cutting Edge Angle TNM_ 43 Insert

$79.05 each

Left Hand Tool Holder MTJN L S 16-4D - OAL = 6" - F = 1.25" - A = 1"Multipurpose toolholder equipped with triangular negative double-sided inserts with strong cutting edges. Profiling and copying toolholder for specific applications, roughing, semi finishing and finishing. ​Specifications Model: MTJNLS 16-4D Shank height (A):...
MTJNLS 16-3D Tool Holder — Canela, FM Carbide

MTJNLS 16-3D Tool Holder 93° End Cutting Edge Angle TNM_ 33 Insert

$79.05 each

Left Hand Tool Holder MTJN L S 16-3D - OAL = 6" - F = 1.25" - A = 1"Multipurpose toolholder equipped with triangular negative double-sided inserts with strong cutting edges. Profiling and copying toolholder for specific applications, roughing, semi finishing and finishing. ​Specifications Model: MTJNLS 16-3D Shank height (A):...
MTFN cartridge - Canela, FM Carbide

MTFNL16CA-3C Cartridge 90° Lead Angle TNMG 33 Insert

$154.92 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MTFNL16CA-3C Dimension D: 2.362" Length (L): 2.480" Length (L1): 1.497" Width (b): 0.787" Dimension...
SIMTFNL Boring Bar

SIMTFNL 16-3 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts

$259.63 each

SIMTFNL 16-3 — boring bar, 1.00" bar diameter, 1.280" minimum bore, 12.0" overall length. Made in the USA by RMC Tooling. 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a...
MTENNS 16-4D Tool Holder — Canela, FM Carbide

MTEN NS 16-4D Tool Holder 60° End Cutting Edge Angle TNM__43__ Insert

$79.05 each

Neutral Hand Tool Holder MTENNS 16-4D - OAL = 6" - A = 1"Copying toolholder equipped with triangular negative double-sided inserts with strong cutting edges. Copying toolholder for general applications, roughing, semi-finishing and finishing. Specifications Model: MTENNS 16-4D Shank height (A): 1.000" Shank width (B): 1.000" Overall length (C): 6.00"...
Canela NL-68L lock pin — dimensions diagram from the Canela spare-parts catalog

NL-68L Lock Pin — 3/8-24 UNF, A9/64" key, 3.5 N·m

$7.45 each

Canela reference NL-68L — lock pin. Original lock pin for Canela indexable turning tooling. The lock pin holds the insert clamp in a double-lock or top-clamp toolholder. Sold individually, no minimum order.Specifications Reference: NL-68L Part type: Lock pin Thread (a): 3/8-24 UNF Dimension b: 0.196" Dimension b1: 0.362" Overall length...
PTGNR20CA-22 Cartridge — Canela, FM Carbide

PTGNL20CA-22 Cartridge 90° Lead Angle TNMG 43 Insert

$201.68 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: PTGNL20CA-22 Dimension D: 2.756" Length (L): 2.756" Length (L1): 1.575" Width (b): 0.787" Dimension...
MTENNS246E Tool Holder — Canela, FM Carbide

MTEN NS 12-3B Tool Holder 60° End Cutting Edge Angle TNM__33__ Insert

$74.32 each

Neutral Hand Tool Holder MTENNS 12-3B - OAL = 4" - A = 0.75"Copying toolholder equipped with triangular negative double-sided inserts with strong cutting edges. Copying toolholder for general applications, roughing, semi-finishing and finishing. Specifications Model: MTENNS 12-3B Shank height (A): 0.750" Shank width (B): 0.750" Overall length (C): 4.50"...
S24U-MTUNR4 Boring Bar — Canela, FM Carbide

S16T-MTUNL3 Boring Bar 93° Lead Angle TNM 33 Insert

$243.79 each

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...
MTUN cartridge - Canela, FM Carbide

MTUNL12CA-3C Cartridge 93° Lead Angle TNMG 33 Insert

$154.92 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MTUNL12CA-3C Dimension D: 1.969" Length (L): 2.165" Length (L1): 1.378" Width (b): 0.630" Dimension...
S40V-WTFNR4 Boring Bar — Canela, FM Carbide

S16T-WTFNL3 Boring Bar 90° Lead Angle TNM 33 Insert

$243.79 each

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...
SIMTFNR Boring Bar

SIMTFNR 16-3 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts

$259.63 each

SIMTFNR 16-3 — boring bar, 1.00" bar diameter, 1.280" minimum bore, 12.0" overall length. Made in the USA by RMC Tooling. 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a...
DTGNR204DN Tool Holder — Canela, FM Carbide

DTGNL163DN Tool Holder 90° Lead Angle TNM 33 Insert

$82.22 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
SIMTFNL Boring Bar

SIMTFNL 28-4 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts

$346.17 each

SIMTFNL 28-4 — boring bar, 1.75" bar diameter, 2.312" minimum bore, 14.0" overall length. Made in the USA by RMC Tooling. 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a...
SIMTFNL Boring Bar

SI-MTFNL 36-4 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts

$338.78 each

SI-MTFNL 36-4 — boring bar, 2.25" bar diameter, 2.812" minimum bore, 16.0" overall length. Made in the USA by RMC Tooling. 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a...
SIMTFNL Boring Bar

SI-MTFNL 40-6 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts

$362.97 each

SI-MTFNL 40-6 — boring bar, 2.50" bar diameter, 3.062" minimum bore, 16.0" overall length. Made in the USA by RMC Tooling. 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a...
MTRNR245E Tool Holder — Canela, FM Carbide

MTRNL164D Tool Holder 75° Lead Angle TNM 43 Insert

$79.05 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
MTGN cartridge - Canela, FM Carbide

MTGNL16CA-3C Cartridge 90° Lead Angle TNMG 33 Insert

$154.92 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MTGNL16CA-3C Dimension D: 2.362" Length (L): 2.480" Length (L1): 1.497" Width (b): 0.787" Dimension...
MTENNS246E Tool Holder — Canela, FM Carbide

MTENNS103B Tool Holder 60° Lead Angle TNM 33 Insert

$74.32 each

Copying toolholder equipped with triangular negative double-sided inserts with strong cutting edges. Copying toolholder for general applications, roughing, semi-finishing and finishing. Specifications Model: MTENNS103B Shank height (A): 0.625" Shank width (B): 0.625" Overall length (C): 4.50" Head length (D): 1.125" Insert: TNM..33.. Weight: 0.440 lb Brand: Canela Dimensions and weight...
TNMG 332 CHIP BREAKER MC GRADE TN30 / TNMG 160408 MC TN30

TNMG 332 CHIP BREAKER MC GRADE TN30 / TNMG 160408 MC TN30

$9.25 each

10 inserts per box

Canela reference TNMG332-MC — triangular (T) turning insert, grade TN30. Original Canela indexable insert and 1/32" (0.79 mm) corner radius. Sold individually, no minimum order.Specifications Reference: TNMG332-MC ISO designation: TNMG 160408 Insert shape: triangular (T) Clearance angle: 0° — negative (N) Chipbreaker: MC Thickness (T): 3/16" (4.76 mm) Inscribed circle...
S40V-MTFNL4 Boring Bar — Canela, FM Carbide

S16T-MTFNL3 Boring Bar 90° Lead Angle TNM 33 Insert

$243.79 each

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...
S24U-WTUNR4 Boring Bar — Canela, FM Carbide

S16T-WTUNL3 Boring Bar 93° Lead Angle TNM 33 Insert

$243.79 each

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...