Search results for "tp 32"

CTEPR163D Tool Holder 60° Lead Angle TP 32 Insert

$66.50

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

CTCON443 Tool Holder 90° Lead Angle TP 32 Insert

$80.59

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

SIMTJNR 32-4 -3° End Cutting Edge Angle for Negative Triangle TNM_ Inserts

$375.00 $607.50

SIMTJNR 32-4 — boring bar, 2.00" bar diameter, 2.562" minimum bore, 16.0" overall length. Made in the USA by RMC Tooling. -3° End Cutting Edge Angle for Negative Triangle TNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a...

SI-MTFNL 32-5 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts

$314.57 $393.21

SI-MTFNL 32-5 — boring bar, 2" bar diameter. Made in the USA by RMC Tooling. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a rigid clamping system sized to the bar diameter — the combination that keeps chatter down at...

SIMTFNR 32-5 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts

$375.00 $607.50

SIMTFNR 32-5 — boring bar, 2" bar diameter. Made in the USA by RMC Tooling. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a rigid clamping system sized to the bar diameter — the combination that keeps chatter down at...

SIMTFNL 32-4 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts

$375.00 $607.50

SIMTFNL 32-4 — boring bar, 2.00" bar diameter, 2.562" minimum bore, 16.0" overall length. Made in the USA by RMC Tooling. 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a...

SIMTJNR 32-5 -3° End Cutting Edge Angle for Negative Triangle TNM_ Inserts

$375.00 $607.50

SIMTJNR 32-5 — boring bar, 2" bar diameter. Made in the USA by RMC Tooling. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a rigid clamping system sized to the bar diameter — the combination that keeps chatter down at...

SI-MTJNL 32-5 -3° End Cutting Edge Angle for Negative Triangle TNM_ Inserts

$314.57 $393.21

SI-MTJNL 32-5 — boring bar, 2" bar diameter. Made in the USA by RMC Tooling. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a rigid clamping system sized to the bar diameter — the combination that keeps chatter down at...

S32V-CTFPL4 Boring Bar 90° Lead Angle TP 43 Insert

$336.39

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...

S32V-CTFPR4 Boring Bar 90° Lead Angle TP 43 Insert

$336.39

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...

3-Flute SE 30°H CC REG HSS - 1 X 7/8 X 1-7/8 X 4-1/8

$32.03

($32.03 / item)

3-Flute SE 30°H CC REG HSS Dimensions: 1 X 7/8 X 1-7/8 X 4-1/8 Item: SE-32

CTWPL10CA-11 Cartridge 30° Lead Angle TP 22 Insert

$184.03

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: CTWPL10CA-11 Dimension D: 1.575" Length (L): 1.732" Length (L1): 0.945" Width (b): 0.433" Dimension...

CTWPR10CA-11 Cartridge 30° Lead Angle TP 22 Insert

$184.03

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: CTWPR10CA-11 Dimension D: 1.575" Length (L): 1.732" Length (L1): 0.945" Width (b): 0.433" Dimension...

6-Flute SE 30°H NC X-LONG ROUGH HSS (LN = TiAlN-HC) - 1 X 1 X 6 X 8-1/2

$104.36

($104.36 / item)

6-Flute SE 30°H NC X-LONG ROUGH HSS (LN = TiAlN-HC) Dimensions: 1 X 1 X 6 X 8-1/2 Item: KQCX-32-6LN

6-Flute SE 30°H NC X-LONG ROUGH HSS (CN = TiCN-PG) - 1 X 1 X 6 X 8-1/2

$100.60

($100.60 / item)

6-Flute SE 30°H NC X-LONG ROUGH HSS (CN = TiCN-PG) Dimensions: 1 X 1 X 6 X 8-1/2 Item: KQCX-32-6CN

CTGPR10CA-11 Cartridge 90° Lead Angle TP 22 Insert

$184.03

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: CTGPR10CA-11 Dimension D: 1.575" Length (L): 1.969" Length (L1): 1.181" Width (b): 0.433" Dimension...

CTGPL10CA-11 Cartridge 90° Lead Angle TP 22 Insert

$184.03

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: CTGPL10CA-11 Dimension D: 1.575" Length (L): 1.969" Length (L1): 1.181" Width (b): 0.433" Dimension...

CTFPL10CA-11 Cartridge 90° Lead Angle TP 22 Insert

$184.03

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: CTFPL10CA-11 Dimension D: 1.575" Length (L): 1.969" Length (L1): 1.181" Width (b): 0.433" Dimension...

CTFPR10CA-11 Cartridge 90° Lead Angle TP 22 Insert

$184.03

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: CTFPR10CA-11 Dimension D: 1.575" Length (L): 1.969" Length (L1): 1.181" Width (b): 0.433" Dimension...

S28U-CTFPL4 Boring Bar 90° Lead Angle TP 43 Insert

$316.03

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...