Search results for "tp 43"

DTGNL204DN Tool Holder 90° Lead Angle TNM 43 Insert

$89.96

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

S24U-MTFNL4 Boring Bar 90° Lead Angle TNM 43 Insert

$285.91

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...

MDJNL20CA-4C Cartridge 93° Lead Angle DN 43 Insert

$169.47

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MDJNL20CA-4C Dimension D: 2.756" Length (L): 2.756" Length (L1): 1.575" Width (b): 0.787" Dimension...

S20U-WTFNL4 Boring Bar 90° Lead Angle TNM 43 Insert

$260.52

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...

A32V-MTFNL4 Boring Bar 90° Lead Angle TNM 43 Insert

$386.79

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...

MTCNN644F Tool Holder 90° Lead Angle TNM 43 Insert

$94.61

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

CTWPL16CA-16 Cartridge 30° Lead Angle TP 32 Insert

$184.03

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: CTWPL16CA-16 Dimension D: 2.165" Length (L): 2.087" Length (L1): 1.102" Width (b): 0.787" Dimension...

MTRNR204D Tool Holder 75° Lead Angle TNM 43 Insert

$103.97

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

CTWPR12CA-16 Cartridge 30° Lead Angle TP 32 Insert

$184.03

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: CTWPR12CA-16 Dimension D: 1.969" Length (L): 1.850" Length (L1): 1.063" Width (b): 0.630" Dimension...

CTSPR10CA-11 Cartridge 45° Lead Angle TP 22 Insert

$184.03

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: CTSPR10CA-11 Dimension D: 1.575" Length (L): 1.732" Length (L1): 0.945" Width (b): 0.433" Dimension...

MTCNN124B Tool Holder 90° Lead Angle TNM 43 Insert

$96.70

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

S24U-MTUNL4 Boring Bar 93° Lead Angle TNM 43 Insert

$285.91

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...

S24U-MTFNR4 Boring Bar 90° Lead Angle TNM 43 Insert

$285.91

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...

MDJNR20CA-4C Cartridge 93° Lead Angle DN 43 Insert

$169.47

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MDJNR20CA-4C Dimension D: 2.756" Length (L): 2.756" Length (L1): 1.575" Width (b): 0.787" Dimension...

CTAPR123B Tool Holder 90° Lead Angle TP 32 Insert

$75.41

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

S40V-MVUNR4 Boring Bar 93° Lead Angle VN 43 Insert

$442.99

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...

MTGNR854D Tool Holder 90° Lead Angle TNM 43 Insert

$103.97

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MTFNR854D Tool Holder 90° Lead Angle TNM 43 Insert

$103.97

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

S28U-CTFPR3 Boring Bar 90° Lead Angle TP 32 Insert

$316.03

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...

CTSPL10CA-11 Cartridge 45° Lead Angle TP 22 Insert

$184.03

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: CTSPL10CA-11 Dimension D: 1.575" Length (L): 1.732" Length (L1): 0.945" Width (b): 0.433" Dimension...

CTFPR103 Tool Holder 90° Lead Angle TP 32 Insert

$66.50

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

CTSPL12CA-16 Cartridge 45° Lead Angle TP 32 Insert

$184.03

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: CTSPL12CA-16 Dimension D: 1.969" Length (L): 1.063" Length (L1): 1.063" Width (b): 0.630" Dimension...

CTSPR12CA-16 Cartridge 45° Lead Angle TP 32 Insert

$184.03

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: CTSPR12CA-16 Dimension D: 1.969" Length (L): 1.063" Length (L1): 1.063" Width (b): 0.630" Dimension...

CTWPL10CA-11 Cartridge 30° Lead Angle TP 22 Insert

$184.03

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: CTWPL10CA-11 Dimension D: 1.575" Length (L): 1.732" Length (L1): 0.945" Width (b): 0.433" Dimension...

S20U-MTFNR4 Boring Bar 90° Lead Angle TNM 43 Insert

$260.52

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...

MTGNL20CA-4C Cartridge 90° Lead Angle TNMG 43 Insert

$169.47

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MTGNL20CA-4C Dimension D: 2.756" Length (L): 2.756" Length (L1): 1.575" Width (b): 0.787" Dimension...

CTCON443 Tool Holder 90° Lead Angle TP 32 Insert

$80.59

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

S16T-CTFPL3 Boring Bar 90° Lead Angle TP 32 Insert

$243.79

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...

S16T-MDUNR4 Boring Bar 93° Lead Angle DN 43 Insert

$243.79

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...

CTRPL123B Tool Holder 75° Lead Angle TP 32 Insert

$75.41

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

CTRPR123B Tool Holder 75° Lead Angle TP 32 Insert

$75.41

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

S32V-MVUNL4 Boring Bar 93° Lead Angle VN 43 Insert

$382.14

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...

CTFPR123B Tool Holder 90° Lead Angle TP 32 Insert

$75.41

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

S16T-MDUNL4 Boring Bar 93° Lead Angle DN 43 Insert

$243.79

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...

PCFNL20CA-12 Cartridge 90° Lead Angle CN 43 Insert

$201.68

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: PCFNL20CA-12 Dimension D: 2.756" Length (L): 2.756" Length (L1): 1.575" Width (b): 0.787" Dimension...

S20U-MTFNL4 Boring Bar 90° Lead Angle TNM 43 Insert

$260.52

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...

CTFPL123B Tool Holder 90° Lead Angle TP 32 Insert

$75.41

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

CTEPR123B Tool Holder 60° Lead Angle TP 32 Insert

$75.41

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MTFNL854D Tool Holder 90° Lead Angle TNM 43 Insert

$103.97

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

PCLNL20CA-12 Cartridge 95° Lead Angle CN 43 Insert

$201.68

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: PCLNL20CA-12 Dimension D: 2.756" Length (L): 2.756" Length (L1): 1.575" Width (b): 0.787" Dimension...

CTGPR123B Tool Holder 90° Lead Angle TP 32 Insert

$75.41

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MTCNN664F Tool Holder 90° Lead Angle TNM 43 Insert

$220.41

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

CTCPR123B Tool Holder 90° Lead Angle TP 32 Insert

$98.25

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

CTFPL103 Tool Holder 90° Lead Angle TP 32 Insert

$66.50

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

CTSPL16CA-16 Cartridge 45° Lead Angle TP 32 Insert

$184.03

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: CTSPL16CA-16 Dimension D: 2.165" Length (L): 2.087" Length (L1): 1.102" Width (b): 0.787" Dimension...

CTFPL163D Tool Holder 90° Lead Angle TP 32 Insert

$80.59

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

CTFPR10CA-11 Cartridge 90° Lead Angle TP 22 Insert

$184.03

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: CTFPR10CA-11 Dimension D: 1.575" Length (L): 1.969" Length (L1): 1.181" Width (b): 0.433" Dimension...

CTAPL123B Tool Holder 90° Lead Angle TP 32 Insert

$75.41

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

CTGPL123B Tool Holder 90° Lead Angle TP 32 Insert

$75.41

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

CTEPL123B Tool Holder 60° Lead Angle TP 32 Insert

$75.41

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...