FM CARBIDE · TOOL FINDER

Search results

348 results

S40V-WTFNR4 Boring Bar — Canela, FM Carbide

S24U-WTFNL4 Boring Bar 90° Lead Angle TNM 43 Insert

$285.91 each

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...
A24U-MTFNL4 Boring Bar — Canela, FM Carbide

A24U-MTFN L 4 - 90° Side & End Cutting Edge Angle

$328.65 each

Left Hand Boring Bar A24U-MTFN 4 - 90° Side & End Cutting Edge Angle - OAL = 14" Cutting Length = 3" Internal turning and profiling boring bar equipped with triangular negative double-sided insert. Specifications Model: A24U-MTFNL4 Bar diameter (D): 1.500" Minimum bore (A): 1.780" Overall length (L1): 14.00" Head...
MTENNS 16-4D Tool Holder — Canela, FM Carbide

MTEN NS 16-4D Tool Holder 60° End Cutting Edge Angle TNM__43__ Insert

$79.05 each

Neutral Hand Tool Holder MTENNS 16-4D - OAL = 6" - A = 1"Copying toolholder equipped with triangular negative double-sided inserts with strong cutting edges. Copying toolholder for general applications, roughing, semi-finishing and finishing. Specifications Model: MTENNS 16-4D Shank height (A): 1.000" Shank width (B): 1.000" Overall length (C): 6.00"...
MTCNN664F Tool Holder — Canela, FM Carbide

MTCNN124B Tool Holder 90° Lead Angle TNM 43 Insert

$96.70 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
TE Tool Holder

TE 16-4 Indexable Turning Tool Holder, 1" Square Shank

$83.65 each

TE 16-4 — toolholder, 1.000" square shank, 6.000" overall length. Made in the USA by RMC Tooling. 30° Side Cutting Edge Angle for Negative Triangle TNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...
DTGNR204DN Tool Holder — Canela, FM Carbide

DTGNL164DN Tool Holder 90° Lead Angle TNM 43 Insert

$82.22 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
DTGNR204DN Tool Holder — Canela, FM Carbide

DTGNR164DN Tool Holder 90° Lead Angle TNM 43 Insert

$82.22 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
MTRNR245E Tool Holder — Canela, FM Carbide

MTRNL164D Tool Holder 75° Lead Angle TNM 43 Insert

$79.05 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
TFR Tool Holder

TFR 16-4 Indexable Turning Tool Holder, 1" Square Shank

$83.65 each

TFR 16-4 — toolholder, 1.000" square shank, 6.000" overall length. Made in the USA by RMC Tooling. 0° Side Cutting Edge Angle for Triangle TNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool goes...
DTGNR204DN Tool Holder — Canela, FM Carbide

DTGNR204DN Tool Holder 90° Lead Angle TNM 43 Insert

$89.96 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
MTCNN664F Tool Holder — Canela, FM Carbide

MTCNN664F Tool Holder 90° Lead Angle TNM 43 Insert

$220.41 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
MTFN cartridge - Canela, FM Carbide

MTFNL20CA-4C Cartridge 90° Lead Angle TNMG 43 Insert

$169.47 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MTFNL20CA-4C Dimension D: 2.756" Length (L): 2.756" Length (L1): 1.575" Width (b): 0.787" Dimension...
PTGNR20CA-22 Cartridge — Canela, FM Carbide

PTGNL20CA-22 Cartridge 90° Lead Angle TNMG 43 Insert

$201.68 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: PTGNL20CA-22 Dimension D: 2.756" Length (L): 2.756" Length (L1): 1.575" Width (b): 0.787" Dimension...
MTGNR865D Tool Holder — Canela, FM Carbide

MTGNR204D Tool Holder 90° Lead Angle TNM 43 Insert

$86.86 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
S40V-MTFNR4 Boring Bar — Canela, FM Carbide

S32V-MTFNR5 Boring Bar 90° Lead Angle TNM 54 Insert

$336.39 each

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...
MTRNR245E Tool Holder — Canela, FM Carbide

MTRNR204D Tool Holder 75° Lead Angle TNM 43 Insert

$103.97 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
MTGNR865D Tool Holder — Canela, FM Carbide

MTGNR864D Tool Holder 90° Lead Angle TNM 43 Insert

$118.45 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
MTGNR865D Tool Holder — Canela, FM Carbide

MTGNR164C Tool Holder 90° Lead Angle TNM 43 Insert

$79.05 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
Canela TNMG433MC triangular turning insert, grade TN15

TNMG 433 Turning Insert, MC Chipbreaker, 0.047" Corner Radius, Grade TN15

$11.40 each

10 inserts per box

Canela reference TNMG433MC — triangular turning insert, grade TN15. Original Canela indexable insert, 0.866" cutting edge and 0.047" corner radius. Sold individually, no minimum order.Specifications Reference: TNMG433MC Insert shape: triangular (T) Clearance angle: 0° Chipbreaker: MC Cutting edge length (l): 0.866" Thickness (T): 0.187" Inscribed circle (d): 0.500" Corner radius...
WTENNS204D Tool Holder — Canela, FM Carbide

WTENNS164D Tool Holder 60° Lead Angle TNM 43 Insert

$79.05 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
MTRNR245E Tool Holder — Canela, FM Carbide

MTRNR164D Tool Holder 75° Lead Angle TNM 43 Insert

$79.05 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
MTGNR865D Tool Holder — Canela, FM Carbide

MTGNL164C Tool Holder 90° Lead Angle TNM 43 Insert

$79.05 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
MTGNR865D Tool Holder — Canela, FM Carbide

MTGNL204D Tool Holder 90° Lead Angle TNM 43 Insert

$86.86 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
SIMTFNL Boring Bar

SIMTFNL 24-3 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts

$317.30 each

SIMTFNL 24-3 — boring bar, 1.50" bar diameter, 1.780" minimum bore, 14.0" overall length. Made in the USA by RMC Tooling. 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a...
DTJNR244EAN Tool Holder — Canela, FM Carbide

DTJNR164DAN Tool Holder 93° Lead Angle TNM 43 Insert

$125.34 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
SIMTFNR Boring Bar

SIMTFNR 40-5 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts

$432.70 each

SIMTFNR 40-5 — boring bar, 2.50" bar diameter, 3.062" minimum bore, 16.0" overall length. Made in the USA by RMC Tooling. 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a...