Search results for "rc 12"

MTENN 12-4B Tool Holder 30 Degree Side Cutting Edge Angle for Negative Triangle TNM_Inserts

$75.04 $121.56

MTENN 12-4B — toolholder, 0.750" square shank, 4.5" overall length. Made in the USA by RMC Tooling. 30° Side Cutting Edge Angle for Negative Triangle TNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...

S12 NER 3 Indexable Boring Bar for CNC Turning

$267.14 $432.76

S12 NER 3 — boring bar. Made in the USA by RMC Tooling. Internal Boring Bar for Threading & Grooving Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a rigid clamping system sized to the bar diameter — the...

SBR 12-3 Indexable Tool Holder for CNC Turning

$75.04 $121.56

SBR 12-3 — toolholder, 3/4" square shank. Made in the USA by RMC Tooling. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool goes back into the turret at the same cutting-point location every time it...

MVTNR 12-3B Tool Holder -27.50 DEGREE End Cutting Edge Angle for Negative 35 DEGREE Diamond VNM_Inserts

$129.80 $210.28

MVTNR 12-3B — toolholder, 0.75" square shank, 4.5" overall length. Made in the USA by RMC Tooling. -27.50° End Cutting Edge Angle for Negative 35° Diamond VNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the...

STGCR 12-3B Indexable Tool Holder for CNC Turning

$86.53 $140.18

STGCR 12-3B — toolholder, 0.750" square shank, 4.5" overall length. Made in the USA by RMC Tooling. 0° Side Cutting Edge Angle for 7° Positive Triangle TCMT Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the...

SRGCR123B Tool Holder RC 10 Insert

$84.77

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

TFR 12-3 Indexable Tool Holder for CNC Turning

$75.04 $121.56

TFR 12-3 — toolholder, 0.750" square shank, 4.500" overall length. Made in the USA by RMC Tooling. 0° Side Cutting Edge Angle for Triangle TNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool goes...

SIMCLNR 12-4 Indexable Boring Bar for CNC Turning

$259.63 $420.60

SIMCLNR 12-4 — boring bar, 0.75" bar diameter, 1.000" minimum bore, 10.0" overall length. Made in the USA by RMC Tooling. -5° Side & End Cutting Edge Angle for Negative 80° Diamond CNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable...

SIMDJNR 12-4 Indexable Boring Bar for CNC Turning

$328.04 $531.42

SIMDJNR 12-4 — boring bar, 3/4" bar diameter. Made in the USA by RMC Tooling. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a rigid clamping system sized to the bar diameter — the combination that keeps chatter down at...

SIMDUNL 12-3 Indexable Boring Bar for CNC Turning

$223.95 $362.80

SIMDUNL 12-3 — boring bar, 3/4" bar diameter. Made in the USA by RMC Tooling. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a rigid clamping system sized to the bar diameter — the combination that keeps chatter down at...

MTFNR 12-3B Tool Holder 0 End Cutting Edge Angle for Negative Triangle TNM_Inserts

$75.04 $121.56

MTFNR 12-3B — toolholder, 0.750" square shank, 4.5" overall length. Made in the USA by RMC Tooling. 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...

SINER 12-3 Indexable Boring Bar for CNC Turning

$267.14 $432.76

SINER 12-3 — boring bar. Made in the USA by RMC Tooling. Internal Boring Bar for Threading & Grooving Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a rigid clamping system sized to the bar diameter — the combination...

SIMDJNR 12-3 Indexable Boring Bar for CNC Turning

$223.95 $362.80

SIMDJNR 12-3 — boring bar, 3/4" bar diameter. Made in the USA by RMC Tooling. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a rigid clamping system sized to the bar diameter — the combination that keeps chatter down at...

S12 MTJNL 4 Indexable Boring Bar for CNC Turning

$260.25 $421.60

S12 MTJNL 4 — boring bar, 3/4" bar diameter. Made in the USA by RMC Tooling. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a rigid clamping system sized to the bar diameter — the combination that keeps chatter down...

STFCR 12-3B Indexable Tool Holder for CNC Turning

$166.80 $270.22

STFCR 12-3B — toolholder, 0.750" square shank, 4.5" overall length. Made in the USA by RMC Tooling. 0° End Cutting Edge Angle for 7° Positive Triangle TCMT Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the...

SDJC L 12-2B Tool Holder 93° End Cutting Edge Angle DC__21.5__ Insert

$98.25

Left Hand Tool Holder SDJCL 12-2B - OAL = 4.5" - F = 1" - A = 0.75"Multipurpose profiling toolholder equipped with rhombic positive insert (angle 55º). Specifications Model: SDJCL 12-2B Shank height (A): 0.750" Shank width (B): 0.750" Overall length (C): 4.50" Head length (D): 0.708" Dimension F: 1.000"...

MCFNL 12-4B Tool Holder 0 End Cutting Edge Angle for Negative 80 Diamond CNM_ Inserts

$76.46 $123.86

MCFNL 12-4B — toolholder, 0.75" square shank, 4.5" overall length. Made in the USA by RMC Tooling. 0° End Cutting Edge Angle for Negative 80° Diamond CNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the...

SIMTJNR 12-4 Indexable Boring Bar for CNC Turning

$260.25 $421.60

SIMTJNR 12-4 — boring bar, 3/4" bar diameter. Made in the USA by RMC Tooling. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a rigid clamping system sized to the bar diameter — the combination that keeps chatter down at...

S10 SCLCR 2 Indexable Boring Bar for CNC Turning

$122.40 $198.28

S10 SCLCR 2 — boring bar, 0.625" bar diameter, 0.812" minimum bore, 8.00" overall length. Made in the USA by RMC Tooling. -5° End & Side Cutting Edge Angle for 7° Positive 80°Diamond CC_T Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard...

SDL 12-3 Indexable Tool Holder for CNC Turning

$75.04 $121.56

SDL 12-3 — toolholder, 3/4" square shank. Made in the USA by RMC Tooling. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool goes back into the turret at the same cutting-point location every time it...

SBR 12-4 Indexable Tool Holder for CNC Turning

$75.04 $121.56

SBR 12-4 — toolholder, 0.750" square shank, 4.500" overall length. Made in the USA by RMC Tooling. 15° Side Cutting Edge Angle for Negative Square SNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...

SDJCR 12-4B Indexable Tool Holder for CNC Turning

$101.36 $164.20

SDJCR 12-4B — toolholder, 0.750" square shank, 4.5" overall length. Made in the USA by RMC Tooling. -3° Side Cutting Edge Angle for 7° Positive 55° Diamond DC_T Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so...

MTANL 12-3B Tool Holder 0 Side Cutting Edge Angle for Negative Triangle TNM_Inserts

$75.04 $121.56

MTANL 12-3B — toolholder, 0.750" square shank, 4.5" overall length. Made in the USA by RMC Tooling. 0° Side Cutting Edge Angle for Negative Triangle TNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...

STVOL 12-3B Tool Holder O.D. Threading & Shallow Grooving for Triangle TNMC Inserts

$86.53 $140.18

STVOL 12-3B — toolholder, 0.750" square shank, 4.5" overall length. Made in the USA by RMC Tooling. O.D. Threading & Shallow Grooving for Triangle TNMC Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool goes...

S10 STFCR 2 Indexable Boring Bar for CNC Turning

$242.48 $392.82

S10 STFCR 2 — boring bar, 0.625" bar diameter, 0.812" minimum bore, 8.00" overall length. Made in the USA by RMC Tooling. 0° End Cutting Edge Angle for 7° Positive Triangle TC_T Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry,...

SIMWLNR 12-4 Indexable Boring Bar for CNC Turning

$285.26 $462.12

SIMWLNR 12-4 — boring bar, 3/4" bar diameter. Made in the USA by RMC Tooling. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a rigid clamping system sized to the bar diameter — the combination that keeps chatter down at...

STVOR 12-3B Tool Holder O.D. Threading & Shallow Grooving for Triangle TNMC Inserts

$86.53 $140.18

STVOR 12-3B — toolholder, 0.750" square shank, 4.5" overall length. Made in the USA by RMC Tooling. O.D. Threading & Shallow Grooving for Triangle TNMC Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool goes...

S12S-STFCL2 Boring Bar 90° Lead Angle TC 21 Insert

$145.01

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...

MTCNN 12-4B Tool Holder 0 Degree End Cutting Edge Angle for Negative Triangle TNM_Inserts

$81.40 $101.75

MTCNN 12-4B — toolholder, 0.75" square shank, 4.5" overall length. Made in the USA by RMC Tooling. 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...

MTFNL 12-3B Tool Holder 0 End Cutting Edge Angle for Negative Triangle TNM_Inserts

$75.04 $121.56

MTFNL 12-3B — toolholder, 0.750" square shank, 4.5" overall length. Made in the USA by RMC Tooling. 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...

MCGNL 12-4B Tool Holder 0 End Cutting Edge Angle for Negative 80 Diamond CNM_ Inserts

$76.46 $123.86

MCGNL 12-4B — toolholder, 0.75" square shank, 4.5" overall length. Made in the USA by RMC Tooling. 0° Side Cutting Edge Angle for Negative 80° Diamond CNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the...

4-Flute SE 30°H BN HSS - 3/8 X 3/8 X 3/4 X 2-1/2

$21.91

($21.91 / item)

4-Flute SE 30°H BN HSS Dimensions: 3/8 X 3/8 X 3/4 X 2-1/2 Item: RK-12

SCLCR 12-3B Indexable Tool Holder for CNC Turning

$75.00 $121.50

SCLCR 12-3B — toolholder, 0.750" square shank, 4.5" overall length. Made in the USA by RMC Tooling. -5° End or Side Cutting Edge Angle for 7° Positive 80° Diamond CC_T Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference...

SIMCLNL 12-4 Indexable Boring Bar for CNC Turning

$259.63 $420.60

SIMCLNL 12-4 — boring bar, 0.75" bar diameter, 1.000" minimum bore, 10.0" overall length. Made in the USA by RMC Tooling. -5° Side & End Cutting Edge Angle for Negative 80° Diamond CNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable...

SCFCL12CA-12 Cartridge 90° Lead Angle CC 43 Insert

$184.03

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: SCFCL12CA-12 Dimension D: 1.575" Length (L): 1.850" Length (L1): 0.984" Width (b): 0.551" Dimension...

CSKPR12CA-12 Cartridge 75° Lead Angle SP 42 Insert

$184.03

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: CSKPR12CA-12 Dimension D: 1.969" Length (L): 2.165" Length (L1): 1.378" Width (b): 0.630" Dimension...

SIMTUNR 12-3 Indexable Boring Bar for CNC Turning

$182.11 $295.02

SIMTUNR 12-3 — boring bar, 0.75" bar diameter, 1.000" minimum bore, 10.0" overall length. Made in the USA by RMC Tooling. -3° End Cutting Edge Angle for Negative Triangle TNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a...

TE 12-3 Indexable Tool Holder for CNC Turning

$75.04 $121.56

TE 12-3 — toolholder, 0.750" square shank, 4.500" overall length. Made in the USA by RMC Tooling. 30° Side Cutting Edge Angle for Negative Triangle TNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...

MVJNR 12-4B Tool Holder -3 DEGREE Side Cutting Edge Angle for Negative 35 DEGREE Diamond VNM_Inserts

$129.80 $210.28

MVJNR 12-4B — toolholder, 0.75" square shank, 4.5" overall length. Made in the USA by RMC Tooling. -3° Side Cutting Edge Angle for Negative 35° Diamond VNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the...

SVJCR 12-3B Indexable Tool Holder for CNC Turning

$109.26 $177.00

SVJCR 12-3B — toolholder, 0.750" square shank, 4.5" overall length. Made in the USA by RMC Tooling. -3° Side Cutting Edge Angle for 7° Positive 35° Diamond VC_T Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so...

MVTNL 12-3B Tool Holder -27.50 DEGREE End Cutting Edge Angle for Negative 35 DEGREE Diamond VNM_Inserts

$129.80 $210.28

MVTNL 12-3B — toolholder, 0.75" square shank, 4.5" overall length. Made in the USA by RMC Tooling. -27.50° End Cutting Edge Angle for Negative 35° Diamond VNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the...

SIMWLNR 12-3 Indexable Boring Bar for CNC Turning

$196.72 $318.68

SIMWLNR 12-3 — boring bar, 0.75" bar diameter, 1.000" minimum bore, 10.0" overall length. Made in the USA by RMC Tooling. -5° End & Side Cutting Edge Angle for Negative Trigon WNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry,...

MTRNL 12-3B Tool Holder 15 DEGREE Side Cutting Edge Angle for Negative Triangle TNM_Inserts

$75.04 $121.56

MTRNL 12-3B — toolholder, 0.750" square shank, 4.5" overall length. Made in the USA by RMC Tooling. 15° Side Cutting Edge Angle for Negative Triangle TNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...

TGR 12-3 Indexable Tool Holder for CNC Turning

$75.04 $121.56

TGR 12-3 — toolholder, 0.750" square shank, 4.5" overall length. Made in the USA by RMC Tooling. 0° Side Cutting Edge Angle for Triangle TNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool goes...

SSSCL12CA-12 Cartridge 45° Lead Angle SC 43 Insert

$184.03

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: SSSCL12CA-12 Dimension D: 1.575" Length (L): 1.850" Length (L1): 1.063" Width (b): 0.551" Dimension...

SISTHOR 12-3 Indexable Boring Bar for CNC Turning

$317.30 $514.02

SISTHOR 12-3 — boring bar, 3/4" bar diameter. Made in the USA by RMC Tooling. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a rigid clamping system sized to the bar diameter — the combination that keeps chatter down at...

2-Flute DE 30°H CC REG STR-FL HSS (CN = TiCN-PG) - 3/8 X 3/8 X 9/16 X 3

$28.90

($28.90 / item)

2-Flute DE 30°H CC REG STR-FL HSS (CN = TiCN-PG) Dimensions: 3/8 X 3/8 X 9/16 X 3 Item: SBB-12CN

SVJBR 12-3B Indexable Tool Holder for CNC Turning

$153.25 $248.26

SVJBR 12-3B — toolholder, 0.750" square shank, 4.5" overall length. Made in the USA by RMC Tooling. -3° Side Cutting Edge Angle for 5° Positive 35° Diamond VB_T Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so...

TBL 12-3 Indexable Tool Holder for CNC Turning

$71.33 $115.56

TBL 12-3 — toolholder, 3/4" square shank. Made in the USA by RMC Tooling. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool goes back into the turret at the same cutting-point location every time it...

S20 SCLCR 3 Indexable Boring Bar for CNC Turning

$259.33 $420.12

S20 SCLCR 3 — boring bar, 1-1/4" bar diameter. Made in the USA by RMC Tooling. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a rigid clamping system sized to the bar diameter — the combination that keeps chatter down...