FM CARBIDE · TOOL FINDER

Search results

285 results

MTANR245D Tool Holder — Canela, FM Carbide

MTANL164D Tool Holder 90° Lead Angle TNM 43 Insert

$79.05 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
MTGNR865D Tool Holder — Canela, FM Carbide

MTGNR164C Tool Holder 90° Lead Angle TNM 43 Insert

$79.05 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
MTCNN664F Tool Holder — Canela, FM Carbide

MTCNN664F Tool Holder 90° Lead Angle TNM 43 Insert

$220.41 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
S40V-MTFNR4 Boring Bar — Canela, FM Carbide

S32V-MTFNR5 Boring Bar 90° Lead Angle TNM 54 Insert

$336.39 each

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...
DTJNR244EAN Tool Holder — Canela, FM Carbide

DTJNL244EAN Tool Holder 93° Lead Angle TNM 43 Insert

$162.27 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
DTJNR244EAN Tool Holder — Canela, FM Carbide

DTJNR204DAN Tool Holder 93° Lead Angle TNM 43 Insert

$137.81 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
MTGNR865D Tool Holder — Canela, FM Carbide

MTGNR864D Tool Holder 90° Lead Angle TNM 43 Insert

$118.45 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
DTJNR244EAN Tool Holder — Canela, FM Carbide

DTJNL204DAN Tool Holder 93° Lead Angle TNM 43 Insert

$137.81 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
MTANR245D Tool Holder — Canela, FM Carbide

MTANR245D Tool Holder 90° Lead Angle TNM 54 Insert

$118.45 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
MTGNR865D Tool Holder — Canela, FM Carbide

MTGNL204D Tool Holder 90° Lead Angle TNM 43 Insert

$86.86 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
SIMTJNR Boring Bar

SIMTJNR 16-3 -3° End Cutting Edge Angle for Negative Triangle TNM_ Inserts

$259.63 each

SIMTJNR 16-3 — boring bar, 1.00" bar diameter, 1.280" minimum bore, 12.0" overall length. Made in the USA by RMC Tooling. -3° End Cutting Edge Angle for Negative Triangle TNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a...
MTENNS246E Tool Holder — Canela, FM Carbide

MTENNS205D Tool Holder 60° Lead Angle TNM 54 Insert

$103.97 each

Copying toolholder equipped with triangular negative double-sided inserts with strong cutting edges. Copying toolholder for general applications, roughing, semi-finishing and finishing. Specifications Model: MTENNS205D Shank height (A): 1.250" Shank width (B): 1.250" Overall length (C): 6.00" Head length (D): 1.732" Insert: TNM..54.. Weight: 2.755 lb Brand: Canela Dimensions and weight...
MTGNR865D Tool Holder — Canela, FM Carbide

MTGNL164C Tool Holder 90° Lead Angle TNM 43 Insert

$79.05 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
MTFN toolholder - Canela, FM Carbide

MTFNR164D Tool Holder 90° Lead Angle TNM 43 Insert

$79.05 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
MTRNR245E Tool Holder — Canela, FM Carbide

MTRNR245E Tool Holder 75° Lead Angle TNM 54 Insert

$118.45 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
MTGNR865D Tool Holder — Canela, FM Carbide

MTGNR854D Tool Holder 90° Lead Angle TNM 43 Insert

$103.97 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
MTGNR865D Tool Holder — Canela, FM Carbide

MTGNL854D Tool Holder 90° Lead Angle TNM 43 Insert

$103.97 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
PTTNR20CA-22 Cartridge — Canela, FM Carbide

PTTNL20CA-22 Cartridge 60° Lead Angle TNMG 43 Insert

$201.68 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: PTTNL20CA-22 Dimension D: 2.756" Length (L): 2.756" Length (L1): 1.575" Width (b): 0.787" Dimension...
Canela TNMG431FC triangular turning insert, grade TN15

TNMG 431 Turning Insert, FC Chipbreaker, 0.016" Corner Radius, Grade TN15

$11.40 each

10 inserts per box

Canela reference TNMG431FC — triangular turning insert, grade TN15. Original Canela indexable insert, 0.866" cutting edge and 0.016" corner radius. Sold individually, no minimum order.Specifications Reference: TNMG431FC Insert shape: triangular (T) Clearance angle: 0° Chipbreaker: FC Cutting edge length (l): 0.866" Thickness (T): 0.187" Inscribed circle (d): 0.500" Corner radius...
DTJNR244EAN Tool Holder — Canela, FM Carbide

DTJNR244EAN Tool Holder 93° Lead Angle TNM 43 Insert

$162.27 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
SIMTFNR Boring Bar

SIMTFNR 24-3 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts

$317.30 each

SIMTFNR 24-3 — boring bar, 1.50" bar diameter, 1.780" minimum bore, 14.0" overall length. Made in the USA by RMC Tooling. 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a...
MTFN toolholder - Canela, FM Carbide

MTFNL164D Tool Holder 90° Lead Angle TNM 43 Insert

$79.05 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
Canela TNMA433 triangular turning insert, grade TK15

TNMA 433 Turning Insert, 0.047" Corner Radius, Grade TK15

$11.40 each

10 inserts per box

Canela reference TNMA433 — triangular turning insert, grade TK15. Original Canela indexable insert, 0.866" cutting edge and 0.047" corner radius. Sold individually, no minimum order.Specifications Reference: TNMA433 Insert shape: triangular (T) Clearance angle: 0° Cutting edge length (l): 0.866" Thickness (T): 0.187" Inscribed circle (d): 0.500" Corner radius (r): 0.047"...
PTGNR20CA-22 Cartridge — Canela, FM Carbide

PTGNL20CA-22 Cartridge 90° Lead Angle TNMG 43 Insert

$201.68 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: PTGNL20CA-22 Dimension D: 2.756" Length (L): 2.756" Length (L1): 1.575" Width (b): 0.787" Dimension...
PTTNR20CA-22 Cartridge — Canela, FM Carbide

PTTNR20CA-22 Cartridge 60° Lead Angle TNMG 43 Insert

$201.68 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: PTTNR20CA-22 Dimension D: 2.756" Length (L): 2.756" Length (L1): 1.575" Width (b): 0.787" Dimension...
MTGNR865D Tool Holder — Canela, FM Carbide

MTGNR164D Tool Holder 90° Lead Angle TNM 43 Insert

$79.05 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
MTFN toolholder - Canela, FM Carbide

MTFNL204D Tool Holder 90° Lead Angle TNM 43 Insert

$86.86 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
S40V-MTFNL4 Boring Bar — Canela, FM Carbide

S32V-MTFNL5 Boring Bar 90° Lead Angle TNM 54 Insert

$336.39 each

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...
MTGNR865D Tool Holder — Canela, FM Carbide

MTGNR245E Tool Holder 90° Lead Angle TNM 54 Insert

$118.45 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
Canela TNMG432MC triangular turning insert, grade TN15

TNMG 432 Turning Insert, MC Chipbreaker, 0.031" Corner Radius, Grade TN15

$11.40 each

10 inserts per box

Canela reference TNMG432MC — triangular turning insert, grade TN15. Original Canela indexable insert, 0.866" cutting edge and 0.031" corner radius. Sold individually, no minimum order.Specifications Reference: TNMG432MC Insert shape: triangular (T) Clearance angle: 0° Chipbreaker: MC Cutting edge length (l): 0.866" Thickness (T): 0.187" Inscribed circle (d): 0.500" Corner radius...
SIMTFNR Boring Bar

SIMTFNR 16-3 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts

$259.63 each

SIMTFNR 16-3 — boring bar, 1.00" bar diameter, 1.280" minimum bore, 12.0" overall length. Made in the USA by RMC Tooling. 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a...
SIMTJNR Boring Bar

SIMTJNR 20-3 -3° End Cutting Edge Angle for Negative Triangle TNM_ Inserts

$288.44 each

SIMTJNR 20-3 — boring bar, 1.25" bar diameter, 1.530" minimum bore, 14.0" overall length. Made in the USA by RMC Tooling. -3° End Cutting Edge Angle for Negative Triangle TNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a...
MTGNR865D Tool Holder — Canela, FM Carbide

MTGNR865D Tool Holder 90° Lead Angle TNM 54 Insert

$118.45 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
MTCNN664F Tool Holder — Canela, FM Carbide

MTCNN644F Tool Holder 90° Lead Angle TNM 43 Insert

$94.61 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
MTGNR865D Tool Holder — Canela, FM Carbide

MTGNR205D Tool Holder 90° Lead Angle TNM 54 Insert

$103.97 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
MTRNR245E Tool Holder — Canela, FM Carbide

MTRNR205D Tool Holder 75° Lead Angle TNM 54 Insert

$103.97 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
MTFN toolholder - Canela, FM Carbide

MTFNR205D Tool Holder 90° Lead Angle TNM 54 Insert

$103.97 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
Canela TNMG432MC triangular turning insert, grade TN30

TNMG 432 Turning Insert, MC Chipbreaker, 0.031" Corner Radius, Grade TN30

$11.40 each

10 inserts per box

Canela reference TNMG432MC — triangular turning insert, grade TN30. Original Canela indexable insert, 0.866" cutting edge and 0.031" corner radius. Sold individually, no minimum order.Specifications Reference: TNMG432MC Insert shape: triangular (T) Clearance angle: 0° Chipbreaker: MC Cutting edge length (l): 0.866" Thickness (T): 0.187" Inscribed circle (d): 0.500" Corner radius...
MTGNR865D Tool Holder — Canela, FM Carbide

MTGNR165D Tool Holder 90° Lead Angle TNM 54 Insert

$94.61 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
SIMTFNL Boring Bar

SI-MTFNL 40-6 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts

$362.97 each

SI-MTFNL 40-6 — boring bar, 2.50" bar diameter, 3.062" minimum bore, 16.0" overall length. Made in the USA by RMC Tooling. 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a...
SIMTFNR Boring Bar

SIMTFNR 20-3 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts

$288.44 each

SIMTFNR 20-3 — boring bar, 1.25" bar diameter, 1.530" minimum bore, 14.0" overall length. Made in the USA by RMC Tooling. 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a...