Search results for "tnmc 663"

MTANR 10-3B Tool Holder 0 Side Cutting Edge Angle for Negative Triangle TNM_Inserts

$75.00 $121.50

MTANR 10-3B — toolholder, 0.625" square shank, 4.5" overall length. Made in the USA by RMC Tooling. 0° Side Cutting Edge Angle for Negative Triangle TNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...

MTJNR 12-3B Tool Holder 3 Side Cutting Edge Angle for Negative Triangle TNM_Inserts

$75.04 $121.56

MTJNR 12-3B — toolholder, 0.750" square shank, 4.5" overall length. Made in the USA by RMC Tooling. 3°Side Cutting Edge Angle for Negative Triangle TNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool goes...

DTJNL123BAN Tool Holder 93° Lead Angle TNM 33 Insert

$118.06

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MTFNR 16-5D Tool Holder 0 End Cutting Edge Angle for Negative Triangle TNM_Inserts

$86.53 $140.18

MTFNR 16-5D — toolholder, 1.000" square shank, 6.0" overall length. Made in the USA by RMC Tooling. 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...

STVOL 20-4D Tool Holder O.D. Threading & Shallow Grooving for Triangle TNMC Inserts

$112.48 $182.22

STVOL 20-4D — toolholder, 1.250" square shank, 6.0" overall length. Made in the USA by RMC Tooling. O.D. Threading & Shallow Grooving for Triangle TNMC Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool goes...

MTJNLS 12-3B Tool Holder 93° End Cutting Edge Angle TNM_ 33 Insert

$81.68

Left Hand Tool Holder MTJN L S 12-3B - OAL = 4.5" - F = 1" - A = 0.75"Multipurpose toolholder equipped with triangular negative double-sided inserts with strong cutting edges. Profiling and copying toolholder for specific applications, roughing, semifinishing and finishing. ​Inserts that fit this toolBy its ANSI designation...

MTLNR 16-4D Tool Holder -5 DEGREE Side Cutting Edge Angle for Negative Triangle TNM_Inserts

$92.32 $149.56

MTLNR 16-4D — toolholder, 1.00" square shank, 6.0" overall length. Made in the USA by RMC Tooling. -5° Side Cutting Edge Angle for Negative Triangle TNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...

MTRNR 12-3B Tool Holder 15 DEGREE Side Cutting Edge Angle for Negative Triangle TNM_Inserts

$75.04 $121.56

MTRNR 12-3B — toolholder, 0.750" square shank, 4.5" overall length. Made in the USA by RMC Tooling. 15° Side Cutting Edge Angle for Negative Triangle TNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...

MTJNL 08-2A Tool Holder 3 Side Cutting Edge Angle for Negative Triangle TNM_Inserts

$75.00 $121.50

MTJNL 08-2A — toolholder, 0.500" square shank, 4.0" overall length. Made in the USA by RMC Tooling. 3°Side Cutting Edge Angle for Negative Triangle TNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool goes...

DTJNL204DAN Tool Holder 93° Lead Angle TNM 43 Insert

$137.81

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

STVOL 20-5D Tool Holder O.D. Threading & Shallow Grooving for Triangle TNMC Inserts

$112.48 $182.22

STVOL 20-5D — toolholder, 1.250" square shank, 6.0" overall length. Made in the USA by RMC Tooling. O.D. Threading & Shallow Grooving for Triangle TNMC Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool goes...

SI-MTFNL 40-6 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts

$362.97 $453.71

SI-MTFNL 40-6 — boring bar, 2.50" bar diameter, 3.062" minimum bore, 16.0" overall length. Made in the USA by RMC Tooling. 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a...

MTRNL 20-6E Tool Holder 15 DEGREE Side Cutting Edge Angle for Negative Triangle TNM_Inserts

$91.94 $114.93

MTRNL 20-6E — toolholder, 1.250" square shank, 7.0" overall length. Made in the USA by RMC Tooling. 15° Side Cutting Edge Angle for Negative Triangle TNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...

MTFNL 12-3B Tool Holder 0 End Cutting Edge Angle for Negative Triangle TNM_Inserts

$75.04 $121.56

MTFNL 12-3B — toolholder, 0.750" square shank, 4.5" overall length. Made in the USA by RMC Tooling. 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...

23.218.50.63/090 BT50 to PSC63

$469.17

Canela reference 23.218.50.63/090 — PSC modular machine adaptor. Adaptor from a JIS B 6339 (BT) machine taper to a PSC ISO 26623-1 socket. The PSC polygonal shank coupling (ISO 26623-1) clamps from inside, so the tool changes in seconds and repeats to the micron.Specifications Reference: 23.218.50.63/090 Coupling: PSC 63 (ISO...

TNMG 332 Turning Insert, TC Chipbreaker, 0.031" Corner Radius, Grade TS20

$11.14

Canela reference TNMG332TC — triangular turning insert, grade TS20. Original Canela indexable insert, 0.650" cutting edge and 0.031" corner radius. Sold individually, no minimum order.Specifications Reference: TNMG332TC Insert shape: triangular (T) Clearance angle: 0° Chipbreaker: TC Cutting edge length (l): 0.650" Thickness (T): 0.187" Inscribed circle (d): 0.375" Corner radius...

MTFNL 10-2B Tool Holder 0 End Cutting Edge Angle for Negative Triangle TNM_Inserts

$62.92 $78.65

MTFNL 10-2B — toolholder, 0.625" square shank, 4.5" overall length. Made in the USA by RMC Tooling. 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...

MTJNL 85-5D Tool Holder 3 Side Cutting Edge Angle for Negative Triangle TNM_Inserts

$113.43 $141.79

MTJNL 85-5D — toolholder, 1.000" × 1.250" shank (width × height), 6.0" overall length. Made in the USA by RMC Tooling. 3°Side Cutting Edge Angle for Negative Triangle TNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface,...

SI-MDJNL 36-5 -3° Side & End Cutting Edge Angle for Negative 55° Diamond DNM_ Inserts

$480.92 $601.15

SI-MDJNL 36-5 — boring bar, 2.25" bar diameter, 3.250" minimum bore, 16.0" overall length. Made in the USA by RMC Tooling. -3° End Cutting Edge Angle for Negative 55° Diamond DNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and...

RMC Insert Shims — Models MTN-432 to TSN-533

$7.46 $9.94

Replacement shims and shim seats for indexable turning and milling tool holders are available. The shim protects the holder pocket from insert breakage—replacing a worn shim is far cheaper than replacing the holder. Covers the common negative and positive insert geometries (CNMG, DNMG, SNMG, TNMG, WNMG, VNMG, and more—match the...

SIMTFNR 40-6 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts

$432.70 $700.98

SIMTFNR 40-6 — boring bar, 2.50" bar diameter, 3.062" minimum bore, 16.0" overall length. Made in the USA by RMC Tooling. 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a...

STVOL 08-3A Tool Holder O.D. Threading & Shallow Grooving for Triangle TNMC Inserts

$72.58 $90.73

STVOL 08-3A — toolholder, 0.500" square shank, 4.0" overall length. Made in the USA by RMC Tooling. O.D. Threading & Shallow Grooving for Triangle TNMC Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool goes...

MTFNR12CA-3C Cartridge 90° Lead Angle TNMG 33 Insert

$154.92

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MTFNR12CA-3C Dimension D: 1.969" Length (L): 2.165" Length (L1): 1.378" Width (b): 0.630" Dimension...

SI-MTFNL 40-5 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts

$362.97 $453.71

SI-MTFNL 40-5 — boring bar, 2.50" bar diameter, 3.062" minimum bore, 16.0" overall length. Made in the USA by RMC Tooling. 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a...

STVOL 12-3B Tool Holder O.D. Threading & Shallow Grooving for Triangle TNMC Inserts

$86.53 $140.18

STVOL 12-3B — toolholder, 0.750" square shank, 4.5" overall length. Made in the USA by RMC Tooling. O.D. Threading & Shallow Grooving for Triangle TNMC Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool goes...

MTCNN 12-4B Tool Holder 0 Degree End Cutting Edge Angle for Negative Triangle TNM_Inserts

$81.40 $101.75

MTCNN 12-4B — toolholder, 0.75" square shank, 4.5" overall length. Made in the USA by RMC Tooling. 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...

TNMG 160412 Chip Breaker BR FM2553 / TNMG 333 BR #FMCarbide

$7.66 $9.57

TNMG 160412 Chip Breaker BR FM2553 / TNMG 333 BR #FMCarbide [10 inserts per box] Cutting parameters and speeds & feeds charts: Carbide End Mill Feeds and Speeds Explained

MTJNR 10-3B Tool Holder 3 Side Cutting Edge Angle for Negative Triangle TNM_Inserts

$75.00 $121.50

MTJNR 10-3B — toolholder, 0.625" square shank, 4.5" overall length. Made in the USA by RMC Tooling. 3°Side Cutting Edge Angle for Negative Triangle TNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool goes...

MTJNL 24-5E Tool Holder 3 Side Cutting Edge Angle for Negative Triangle TNM_Inserts

$109.60 $177.56

MTJNL 24-5E — toolholder, 1.500" square shank, 7.0" overall length. Made in the USA by RMC Tooling. 3°Side Cutting Edge Angle for Negative Triangle TNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool goes...

MTRNR 16-4D Tool Holder 15 DEGREE Side Cutting Edge Angle for Negative Triangle TNM_Inserts

$86.53 $140.18

MTRNR 16-4D — toolholder, 1.000" square shank, 6.0" overall length. Made in the USA by RMC Tooling. 15° Side Cutting Edge Angle for Negative Triangle TNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...

TNMG 160404 Chip Breaker BF Grade FM2543 / TNMG 331 BF #FMCarbide

$7.66 $9.57

TNMG 160404 Chip Breaker BF Grade FM2543 / TNMG 331 BF #FMCarbide [10 inserts per box] Cutting parameters and speeds & feeds charts: Carbide End Mill Feeds and Speeds Explained

TNMG 160404 Chip Breaker BG Grade FM2543 / TNMG 331 BG #FMCarbide

$7.66 $9.57

TNMG 160404 Chip Breaker BG Grade FM2543 / TNMG 331 BG #FMCarbide [10 inserts per box] Cutting parameters and speeds & feeds charts: Carbide End Mill Feeds and Speeds Explained

MTRNL 10-3B Tool Holder 15 DEGREE Side Cutting Edge Angle for Negative Triangle TNM_Inserts

$62.92 $78.65

MTRNL 10-3B — toolholder, 0.625" square shank, 4.5" overall length. Made in the USA by RMC Tooling. 15° Side Cutting Edge Angle for Negative Triangle TNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...

MTANR 10-2B Tool Holder 0 Side Cutting Edge Angle for Negative Triangle TNM_Inserts

$62.92 $78.65

MTANR 10-2B — toolholder, 0.625" square shank, 4.5" overall length. Made in the USA by RMC Tooling. 0° Side Cutting Edge Angle for Negative Triangle TNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...

MTANR 08-2A Tool Holder 0 Side Cutting Edge Angle for Negative Triangle TNM_Inserts

$62.92 $78.65

MTANR 08-2A — toolholder, 0.500" square shank, 4.0" overall length. Made in the USA by RMC Tooling. 0° Side Cutting Edge Angle for Negative Triangle TNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...

MTGNL 10-2B Tool Holder 0 Side Cutting Edge Angle for Negative Triangle TNM_Inserts

$62.92 $78.65

MTGNL 10-2B — toolholder, 0.625" square shank, 4.5" overall length. Made in the USA by RMC Tooling. 0° Side Cutting Edge Angle for Negative Triangle TNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...

MTANL 12-3B Tool Holder 0 Side Cutting Edge Angle for Negative Triangle TNM_Inserts

$75.04 $121.56

MTANL 12-3B — toolholder, 0.750" square shank, 4.5" overall length. Made in the USA by RMC Tooling. 0° Side Cutting Edge Angle for Negative Triangle TNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...

MTFNR 10-3B Tool Holder 0 End Cutting Edge Angle for Negative Triangle TNM_Inserts

$74.09 $120.02

MTFNR 10-3B — toolholder, 0.625" square shank, 4.5" overall length. Made in the USA by RMC Tooling. 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...

MTJNLS 16-4D Tool Holder 93° End Cutting Edge Angle TNM_ 43 Insert

$79.05 $81.68

Left Hand Tool Holder MTJN L S 16-4D - OAL = 6" - F = 1.25" - A = 1"Multipurpose toolholder equipped with triangular negative double-sided inserts with strong cutting edges. Profiling and copying toolholder for specific applications, roughing, semi finishing and finishing. ​Inserts that fit this toolBy its ANSI...

SIMCLNR 16-3 -5° Side & End Cutting Edge Angle for Negative 80° Diamond CNM_ Inserts

$259.63 $420.60

SIMCLNR 16-3 — boring bar, 1.00" bar diameter, 1.280" minimum bore, 12.0" overall length. Made in the USA by RMC Tooling. -5° Side & End Cutting Edge Angle for Negative 80° Diamond CNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable...

TNMG 432 Turning Insert, MC Chipbreaker, 0.031" Corner Radius, Grade TN15

$11.40

Canela reference TNMG432MC — triangular turning insert, grade TN15. Original Canela indexable insert, 0.866" cutting edge and 0.031" corner radius. Sold individually, no minimum order.Specifications Reference: TNMG432MC Insert shape: triangular (T) Clearance angle: 0° Chipbreaker: MC Cutting edge length (l): 0.866" Thickness (T): 0.187" Inscribed circle (d): 0.500" Corner radius...

TNMG 160404 Chip Breaker BG Grade FM2553 / TNMG 331 BG #FMCarbide

$7.66 $9.57

TNMG 160404 Chip Breaker BG Grade FM2553 / TNMG 331 BG #FMCarbide [10 inserts per box] Cutting parameters and speeds & feeds charts: Carbide End Mill Feeds and Speeds Explained

TNMG 331 Turning Insert, MC Chipbreaker, 0.016" Corner Radius, Grade TN35

$9.13

Canela reference TNMG331MC — triangular turning insert, grade TN35. Original Canela indexable insert, 0.650" cutting edge and 0.016" corner radius. Sold individually, no minimum order.Specifications Reference: TNMG331MC Insert shape: triangular (T) Clearance angle: 0° Chipbreaker: MC Cutting edge length (l): 0.650" Thickness (T): 0.187" Inscribed circle (d): 0.375" Corner radius...

1" OD x 1" Shank OD x 4" LOC x 6-1/2" OAL 6-Flute SE Cobalt HSS Finishing End Mill 30° H CC SQ Long TiCN-PG EDP #75903

$82.83 each

1" OD x 1" Shank OD x 4" LOC x 6-1/2" OAL 6-Flute Single End Cobalt High-Speed Steel (HSS) Finishing End Mill, 30° Helix, Center Cut, Square End, Long Length, TiCN Premium Grade Coating.This 6-flute cobalt high-speed steel finishing end mill combines HSS toughness with improved hot hardness for applications...

1-1/8" OD x 1" Shank OD x 4" LOC x 6-1/2" OAL 6-Flute SE HSS Finishing End Mill 30° H NC SQ Long TiCN-PG EDP #76703

$83.11 each

1-1/8" OD x 1" Shank OD x 4" LOC x 6-1/2" OAL 6-Flute Single End High-Speed Steel (HSS) Finishing End Mill, 30° Helix, Non-Center Cut, Square End, Long Length, TiCN Premium Grade Coating.This 6-flute high-speed steel (hss) finishing end mill uses a 30° helix and long length construction for accurate,...

MTENN 86-5E Tool Holder 30 Degree  Side Cutting Edge Angle for Negative Triangle TNM_Inserts

$91.94 $114.93

MTENN 86-5E — toolholder, 1.000" × 1.500" shank (width × height), 7.0" overall length. Made in the USA by RMC Tooling. 30° Side Cutting Edge Angle for Negative Triangle TNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference...

TNMG 332 CHIP BREAKER MC GRADE TN15 / TNMG 160408 MC TN15

$9.25 $10.28

TNMG 332 CHIP BREAKER MC GRADE TN15 / TNMG 160408 MC TN15 Canela Turning Insert [10 inserts per box]

6mm OD x 6mm Shank OD x 19mm LOC x 63mm OAL 2-Flute SE Solid Carbide Metric End Mill Ball Nose Standard Length TiCN

$13.13 each

6mm OD x 6mm Shank OD x 19mm LOC x 63mm OAL 2-Flute Single End Solid Carbide Metric End Mill, Ball Nose, Standard Length, Titanium Carbonitride (TiCN).This metric solid-carbide end mill provides rigidity, edge retention, and dimensional stability for production milling. The ball-nose profile is suited to contoured surfaces, fillets,...

SIMTJNR 24-4 -3° End Cutting Edge Angle for Negative Triangle TNM_ Inserts

$317.30 $514.02

SIMTJNR 24-4 — boring bar, 1.50" bar diameter, 2.060" minimum bore, 14.0" overall length. Made in the USA by RMC Tooling. -3° End Cutting Edge Angle for Negative Triangle TNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a...

1" OD x 1" Shank OD x 3" LOC x 5-1/2" OAL 6-Flute SE Cobalt HSS Truncated Roughing End Mill 30° H NC SQ Medium TiCN-PG EDP #77253

$86.59 each

1" OD x 1" Shank OD x 3" LOC x 5-1/2" OAL 6-Flute Single End Cobalt High-Speed Steel (HSS) Truncated-Tooth Roughing End Mill, 30° Helix, Non-Center Cut, Square End, Medium Length, TiCN Premium Grade Coating.This 6-flute cobalt high-speed steel roughing end mill combines HSS toughness with improved hot hardness for...