Search results for "TNMC 663"

MTANR 10-2B Tool Holder 0 Side Cutting Edge Angle for Negative Triangle TNM_Inserts

$62.92 $78.65

MTANR 10-2B — toolholder, 0.625" square shank, 4.5" overall length. Made in the USA by RMC Tooling. 0° Side Cutting Edge Angle for Negative Triangle TNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...

MTANR 08-2A Tool Holder 0 Side Cutting Edge Angle for Negative Triangle TNM_Inserts

$62.92 $78.65

MTANR 08-2A — toolholder, 0.500" square shank, 4.0" overall length. Made in the USA by RMC Tooling. 0° Side Cutting Edge Angle for Negative Triangle TNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...

18.306.063.16 PSC63 End Mill Adaptor, 0.630" Shank

$418.71

Canela reference 18.306.063.16 — PSC modular end mill adaptor. Combined end mill adaptor, type Weldon / Whistle-Notch, for tools with cylindrical shank and tightening inclined flat DIN 1835-B+E. The PSC polygonal shank coupling (ISO 26623-1) clamps from inside, so the adaptor changes in seconds and repeats to the micron.Specifications Reference:...

TNMG 160408 Chip Breaker BG Grade FM2538 / TNMG 332 BG #FMCarbide

$7.66 $9.57

TNMG 160408 Chip Breaker BG Grade FM2538 / TNMG 332 BG #FMCarbide [10 inserts per box] Cutting parameters and speeds & feeds charts: Carbide End Mill Feeds and Speeds Explained

MTGNL12CA-3C Cartridge 90° Lead Angle TNMG 33 Insert

$154.92

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MTGNL12CA-3C Dimension D: 1.969" Length (L): 2.165" Length (L1): 1.378" Width (b): 0.630" Dimension...

MTGNR12CA-3C Cartridge 90° Lead Angle TNMG 33 Insert

$154.92

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MTGNR12CA-3C Dimension D: 1.969" Length (L): 2.165" Length (L1): 1.378" Width (b): 0.630" Dimension...

MTJNLS 16-4D Tool Holder 93° End Cutting Edge Angle TNM_ 43 Insert

$79.05 $81.68

Left Hand Tool Holder MTJN L S 16-4D - OAL = 6" - F = 1.25" - A = 1"Multipurpose toolholder equipped with triangular negative double-sided inserts with strong cutting edges. Profiling and copying toolholder for specific applications, roughing, semi finishing and finishing. ​Inserts that fit this toolBy its ANSI...

MTCNN 08-3B Tool Holder 0 Degree End Cutting Edge Angle for Negative Triangle TNM_Inserts

$52.38 $65.47

MTCNN 08-3B — toolholder, 0.50" square shank, 4.5" overall length. Made in the USA by RMC Tooling. 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...

MTCNN 08-3A Tool Holder 0° End Cutting Edge Angle for Negative Triangle TNM_Inserts

$52.38 $65.47

MTCNN 08-3A — toolholder, 0.50" square shank, 4.0" overall length. Made in the USA by RMC Tooling. 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...

23.218.30.32/060 BT30 to PSC32

$365.42

Canela reference 23.218.30.32/060 — PSC modular machine adaptor. Adaptor from a JIS B 6339 (BT) machine taper to a PSC ISO 26623-1 socket. The PSC polygonal shank coupling (ISO 26623-1) clamps from inside, so the tool changes in seconds and repeats to the micron.Specifications Reference: 23.218.30.32/060 Coupling: PSC 32 (ISO...

STVOL 12-3B Tool Holder O.D. Threading & Shallow Grooving for Triangle TNMC Inserts

$86.53 $140.18

STVOL 12-3B — toolholder, 0.750" square shank, 4.5" overall length. Made in the USA by RMC Tooling. O.D. Threading & Shallow Grooving for Triangle TNMC Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool goes...

MVTNL 16-3D Tool Holder -27.50 DEGREE End Cutting Edge Angle for Negative 35 DEGREE Diamond VNM_Inserts

$135.62 $219.70

MVTNL 16-3D — toolholder, 1.00" square shank, 6.0" overall length. Made in the USA by RMC Tooling. -27.50° End Cutting Edge Angle for Negative 35° Diamond VNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the...

STTCL16CA-16 Cartridge 60° Lead Angle TC 32 Insert

$184.03

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: STTCL16CA-16 Dimension D: 1.969" Length (L): 2.480" Length (L1): 1.496" Width (b): 0.689" Dimension...

STCNL1643 Vertical Threading Tool Holder, Left Hand, 1.25" Shank, TNMC/TPMC-43 Inserts

$95.23

Canela reference STCNL1643 — left hand vertical threading tool holder. Vertical on edge threading toolholder.Specifications Reference: STCNL1643 Hand of tool: Left hand Shank height (A): 1.00" Shank width (B): 1.00" Overall length (C): 6.00" Dimension D: 1.25" Dimension F: 1.25" Dimension H: 0.23" Dimension V: 1.156" Insert size: TNMC/TPMC-43 Tightening...

MTHOR 16-5D Tool Holder Gang Tool Holder for Shallow Grooving or I.D. Threading for Triangle TNMA_Inserts

$92.32 $149.56

MTHOR 16-5D — toolholder, 1.000" square shank, 6.0" overall length. Made in the USA by RMC Tooling. Gang Toolholder for Shallow Grooving or I.D. Threading for Triangle TNMA Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so...

MVTNL 16-4D Tool Holder -27.50 DEGREE End Cutting Edge Angle for Negative 35 DEGREE Diamond VNM_Inserts

$135.62 $219.70

MVTNL 16-4D — toolholder, 1.00" square shank, 6.0" overall length. Made in the USA by RMC Tooling. -27.50° End Cutting Edge Angle for Negative 35° Diamond VNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the...

H36 DCLCL 6 Interchangeable Head for CNC Turning

$481.74 $780.42

H36 DCLCL 6 — interchangeable head. Made in the USA by RMC Tooling. Interchangeable boring head from RMC Tooling, machined in the United States. The head mounts on a matching RMC bar, so one bar covers a whole family of geometries and you only buy the cutting end. The retention...

TFL 16-4 Indexable Tool Holder for CNC Turning

$83.65 $135.52

TFL 16-4 — toolholder, 1.000" square shank, 6.000" overall length. Made in the USA by RMC Tooling. 0° Side Cutting Edge Angle for Triangle TNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool goes...

6mm OD x 6mm Shank OD x 19mm LOC x 63mm OAL 2-Flute SE Solid Carbide Metric End Mill Ball Nose Standard Length TiCN

$13.13 each

6mm OD x 6mm Shank OD x 19mm LOC x 63mm OAL 2-Flute Single End Solid Carbide Metric End Mill, Ball Nose, Standard Length, Titanium Carbonitride (TiCN).This metric solid-carbide end mill provides rigidity, edge retention, and dimensional stability for production milling. The ball-nose profile is suited to contoured surfaces, fillets,...

6mm OD x 6mm Shank OD x 19mm LOC x 63mm OAL 3-Flute SE Solid Carbide Metric End Mill Ball Nose Standard Length TiCN

$13.13 each

6mm OD x 6mm Shank OD x 19mm LOC x 63mm OAL 3-Flute Single End Solid Carbide Metric End Mill, Ball Nose, Standard Length, Titanium Carbonitride (TiCN).This metric solid-carbide end mill provides rigidity, edge retention, and dimensional stability for production milling. The ball-nose profile is suited to contoured surfaces, fillets,...

TNMG 332 Turning Insert, TC Chipbreaker, 0.031" Corner Radius, Grade TS20

$11.14

Canela reference TNMG332TC — triangular turning insert, grade TS20. Original Canela indexable insert, 0.650" cutting edge and 0.031" corner radius. Sold individually, no minimum order.Specifications Reference: TNMG332TC Insert shape: triangular (T) Clearance angle: 0° Chipbreaker: TC Cutting edge length (l): 0.650" Thickness (T): 0.187" Inscribed circle (d): 0.375" Corner radius...

TNMG 432 Turning Insert, MHC Chipbreaker, 0.031" Corner Radius, Grade TN30

$11.40

Canela reference TNMG432MHC — triangular turning insert, grade TN30. Original Canela indexable insert, 0.866" cutting edge and 0.031" corner radius. Sold individually, no minimum order.Specifications Reference: TNMG432MHC Insert shape: triangular (T) Clearance angle: 0° Chipbreaker: MHC Cutting edge length (l): 0.866" Thickness (T): 0.187" Inscribed circle (d): 0.500" Corner radius...

MTFNL 12-3B Tool Holder 0 End Cutting Edge Angle for Negative Triangle TNM_Inserts

$75.04 $121.56

MTFNL 12-3B — toolholder, 0.750" square shank, 4.5" overall length. Made in the USA by RMC Tooling. 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...

MTANR163D Tool Holder 90° Lead Angle TNM 33 Insert

$79.05

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

RMC Insert Shims — Models TSN-534 to WSN-433

$8.69 $11.58

Replacement shims and shim seats for indexable turning and milling tool holders are available. The shim protects the holder pocket from insert breakage—replacing a worn shim is far cheaper than replacing the holder. Covers the common negative and positive insert geometries (CNMG, DNMG, SNMG, TNMG, WNMG, VNMG, and more—match the...

SIMTHOR 16-3 Indexable Boring Bar for CNC Turning

$317.30 $514.02

SIMTHOR 16-3 — boring bar, 1.00" bar diameter, 1.388" minimum bore, 12.0" overall length. Made in the USA by RMC Tooling. I.D. Threading & Shallow Grooving for Triangle TNMA Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a rigid...

TNMG 160404 Chip Breaker BMF Grade FM2553 / TNMG 331 BMF #FMCarbide

$8.54 $10.68

TNMG 160404 Chip Breaker BMF Grade FM2553 / TNMG 331 BMF #FMCarbide [10 inserts per box] Cutting parameters and speeds & feeds charts: Carbide End Mill Feeds and Speeds Explained

DTJNL204DAN Tool Holder 93° Lead Angle TNM 43 Insert

$137.81

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MTRNL 10-3B Tool Holder 15 DEGREE Side Cutting Edge Angle for Negative Triangle TNM_Inserts

$62.92 $78.65

MTRNL 10-3B — toolholder, 0.625" square shank, 4.5" overall length. Made in the USA by RMC Tooling. 15° Side Cutting Edge Angle for Negative Triangle TNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...

MTJNL 24-5E Tool Holder 3 Side Cutting Edge Angle for Negative Triangle TNM_Inserts

$109.60 $177.56

MTJNL 24-5E — toolholder, 1.500" square shank, 7.0" overall length. Made in the USA by RMC Tooling. 3°Side Cutting Edge Angle for Negative Triangle TNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool goes...

MTRNL 24-6E Tool Holder 15 DEGREE Side Cutting Edge Angle for Negative Triangle TNM_Inserts

$109.60 $177.56

MTRNL 24-6E — toolholder, 1.500" square shank, 7.0" overall length. Made in the USA by RMC Tooling. 15° Side Cutting Edge Angle for Negative Triangle TNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...

TNMG 160412 Chip Breaker BR FM2543 / TNMG 333 BR #FMCarbide

$7.66 $9.57

TNMG 160412 Chip Breaker BR FM2543 / TNMG 333 BR #FMCarbide [10 inserts per box] Cutting parameters and speeds & feeds charts: Carbide End Mill Feeds and Speeds Explained

STVOR 16-3D Tool Holder O.D. Threading & Shallow Grooving for Triangle TNMC Inserts

$100.98 $163.58

STVOR 16-3D — toolholder, 1.000" square shank, 6.0" overall length. Made in the USA by RMC Tooling. O.D. Threading & Shallow Grooving for Triangle TNMC Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool goes...

MTJNRS 16-4D Tool Holder 93° End Cutting Edge Angle TNM_ 43 Insert

$79.05 $81.68

Right Hand Tool Holder MTJN R S 16-4D - OAL = 6" - F = 1.25" - A = 1"Multipurpose toolholder equipped with triangular negative double-sided inserts with strong cutting edges. Profiling and copying toolholder for specific applications, roughing, semi finishing and finishing. ​Inserts that fit this toolBy its ANSI...

TNMG 332 CHIP BREAKER MC GRADE TN15 / TNMG 160408 MC TN15

$9.25 $10.28

TNMG 332 CHIP BREAKER MC GRADE TN15 / TNMG 160408 MC TN15 Canela Turning Insert [10 inserts per box]

DTJNR163DAN Tool Holder 93° Lead Angle TNM 33 Insert

$125.34

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MTJNR 85-5D Tool Holder 3 Side Cutting Edge Angle for Negative Triangle TNM_Inserts

$92.32 $149.56

MTJNR 85-5D — toolholder, 1.000" × 1.250" shank (width × height), 6.0" overall length. Made in the USA by RMC Tooling. 3°Side Cutting Edge Angle for Negative Triangle TNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface,...

MTGNL 24-6E Tool Holder 0 Side Cutting Edge Angle for Negative Triangle TNM_Inserts

$109.60 $177.56

MTGNL 24-6E — toolholder, 1.500" square shank, 7.0" overall length. Made in the USA by RMC Tooling. 0° Side Cutting Edge Angle for Negative Triangle TNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...

STVOL 16-4D Tool Holder O.D. Threading & Shallow Grooving for Triangle TNMC Inserts

$100.98 $163.58

STVOL 16-4D — toolholder, 1.000" square shank, 6.0" overall length. Made in the USA by RMC Tooling. O.D. Threading & Shallow Grooving for Triangle TNMC Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool goes...

MTJNRS 12-3B Tool Holder 93° End Cutting Edge Angle TNM_ 33 Insert

$74.32 $76.80

Right Hand Tool Holder MTJN R S 12-3B - OAL = 4.5" - F = 1" - A = 0.75"Multipurpose toolholder equipped with triangular negative double-sided inserts with strong cutting edges. Profiling and copying toolholder for specific applications, roughing, semi finishing and finishing.Inserts that fit this toolBy its ANSI designation...

MTGNL 16-5D Tool Holder 0 Side Cutting Edge Angle for Negative Triangle TNM_Inserts

$86.53 $140.18

MTGNL 16-5D — toolholder, 1.000" square shank, 6.0" overall length. Made in the USA by RMC Tooling. 0° Side Cutting Edge Angle for Negative Triangle TNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...

MTGNR 24-6E Tool Holder 0 Side Cutting Edge Angle for Negative Triangle TNM_Inserts

$109.60 $177.56

MTGNR 24-6E — toolholder, 1.500" square shank, 7.0" overall length. Made in the USA by RMC Tooling. 0° Side Cutting Edge Angle for Negative Triangle TNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...

6mm OD x 6mm Shank OD x 19mm LOC x 63mm OAL 4-Flute SE Solid Carbide Metric End Mill Ball Nose Standard Length TiCN

$13.13 each

6mm OD x 6mm Shank OD x 19mm LOC x 63mm OAL 4-Flute Single End Solid Carbide Metric End Mill, Ball Nose, Standard Length, Titanium Carbonitride (TiCN).This metric solid-carbide end mill provides rigidity, edge retention, and dimensional stability for production milling. The ball-nose profile is suited to contoured surfaces, fillets,...

LNMM100605 Milling Insert — Grades ML30 and TL40

$14.45 $17.00

LNMM 100605 GRADE ML30 Canela Milling Insert [10 inserts per box]

TBL 20-6 Indexable Tool Holder for CNC Turning

$128.65 $208.42

TBL 20-6 — toolholder, 1-1/4" square shank. Made in the USA by RMC Tooling. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool goes back into the turret at the same cutting-point location every time it...

MTGNR246E Tool Holder 90° Lead Angle TNM 66 Insert

$118.45

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

STVOL 10-3B Tool Holder O.D. Threading & Shallow Grooving for Triangle TNMC Inserts

$72.58 $90.73

STVOL 10-3B — toolholder, 0.625" square shank, 4.5" overall length. Made in the USA by RMC Tooling. O.D. Threading & Shallow Grooving for Triangle TNMC Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool goes...

MTJNR 20-5D Tool Holder 3 Side Cutting Edge Angle for Negative Triangle TNM_Inserts

$95.20 $154.22

MTJNR 20-5D — toolholder, 1.250" square shank, 6.0" overall length. Made in the USA by RMC Tooling. 3°Side Cutting Edge Angle for Negative Triangle TNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool goes...

RMC Insert Shims — Models B SSQ-16-3 to ISSN-623

$7.46 $9.94

Replacement shims and shim seats for indexable turning and milling tool holders are available. The shim protects the holder pocket from insert breakage—replacing a worn shim is far cheaper than replacing the holder. Covers the common negative and positive insert geometries (CNMG, DNMG, SNMG, TNMG, WNMG, VNMG, and more—match the...

TGR 16-4 Indexable Tool Holder for CNC Turning

$83.65 $135.52

TGR 16-4 — toolholder, 1.000" square shank, 6.0" overall length. Made in the USA by RMC Tooling. 0° Side Cutting Edge Angle for Triangle TNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool goes...