Search results

S20U-MTUNL3 Boring Bar 93° Lead Angle TNM 33 Insert

$299.54 each

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...

S20U-MTFNL4 Boring Bar 90° Lead Angle TNM 43 Insert

$260.52 each

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...

TNMG 160408 Chip Breaker BM Grade FM2533 / TNMG 332 BM #FMCarbide

$5.39 each

10 inserts per box

TNMG 160408 / TNMG 332, chip breaker BM, grade FM2533 — negative triangular turning insert.3/8" inscribed circle, 3/16" thick, 1/32" corner radius. FM2533 is a CVD grade — stable steel applications and nodular cast iron — a balance of wear resistance and chipping resistance.Specifications Insert designation (ISO): TNMG 160408 Insert...

A24U-STCNR4 Vertical Threading Boring Bar, Right Hand, 1.5" Bar, TNMC-43 Inserts

$316.65 each

Canela reference A24U-STCNR4 — right hand vertical threading boring bar. Vertical on edge threading boring bar.Specifications Reference: A24U-STCNR4 Hand of tool: Right hand Bar diameter (D): 1.50" Dimension B: 1.734" Dimension F: 0.984" Overall length (L1): 14.00" Length L2: 1.12" Insert size: TNMC-43 Tightening torque: 3.5 N·m (insert screw) /...

MTGNL 85-4D Tool Holder 0 Side Cutting Edge Angle for Negative Triangle TNM_Inserts

$92.32 each

MTGNL 85-4D — toolholder, 1.000" × 1.250" shank (width × height), 6.0" overall length. Made in the USA by RMC Tooling. 0° Side Cutting Edge Angle for Negative Triangle TNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference...

MTGNL164D Tool Holder 90° Lead Angle TNM 43 Insert

$79.05 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

TNMG 160404 Chip Breaker BF Grade FM2553 / TNMG 331 BF #FMCarbide

$5.39 each

10 inserts per box

TNMG 160404 / TNMG 331, chip breaker BF, grade FM2553 — negative triangular turning insert.3/8" inscribed circle, 3/16" thick, 1/64" corner radius. The BF breaker is the finishing geometry: 0.002–0.010 ipr (0.05–0.25 mm/rev) at 0.02–0.06" (0.5–1.5 mm) depth of cut. FM2553 is a CVD (Al₂O₃) grade — tough substrate for...

TNMG 160408 Chip Breaker BL Grade FM2533 / TNMG 332 BL #FMCarbide

$5.39 each

10 inserts per box

TNMG 160408 / TNMG 332, chip breaker BL, grade FM2533 — negative triangular turning insert.3/8" inscribed circle, 3/16" thick, 1/32" corner radius. The BL breaker is the semi-finishing geometry: 0.004–0.012 ipr (0.1–0.3 mm/rev) at 0.04–0.12" (1–3 mm) depth of cut. FM2533 is a CVD grade — stable steel applications and...

TNMG 160408 Chip Breaker BL Grade FM2538 / TNMG 332 BL #FMCarbide

$5.39 each

10 inserts per box

TNMG 160408 / TNMG 332, chip breaker BL, grade FM2538 — negative triangular turning insert.3/8" inscribed circle, 3/16" thick, 1/32" corner radius. The BL breaker is the semi-finishing geometry: 0.004–0.012 ipr (0.1–0.3 mm/rev) at 0.04–0.12" (1–3 mm) depth of cut. FM2538 is a CVD grade — balanced productivity for continuous...

MTFNL164D Tool Holder 90° Lead Angle TNM 43 Insert

$79.05 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

TNMG 220404 Chip Breaker BF Grade FM324 / TNMG 431 BF #FMCarbide

$9.51 each

10 inserts per box

TNMG 220404 / TNMG 431, chip breaker BF, grade FM324 — negative triangular turning insert.1/2" inscribed circle, 3/16" thick, 1/64" corner radius. The BF breaker is the finishing geometry: 0.002–0.010 ipr (0.05–0.25 mm/rev) at 0.02–0.06" (0.5–1.5 mm) depth of cut. FM324 is a PVD grade — universal multi-purpose grade for...

MTFNL854D Tool Holder 90° Lead Angle TNM 43 Insert

$103.97 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MTGNR123B Tool Holder 90° Lead Angle TNM 33 Insert

$74.32 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

TNMG 160408 Chip Breaker BM Grade FM2543 / TNMG 332 BM #FMCarbide

$5.39 each

10 inserts per box

TNMG 160408 / TNMG 332, chip breaker BM, grade FM2543 — negative triangular turning insert.3/8" inscribed circle, 3/16" thick, 1/32" corner radius. FM2543 is a CVD grade — first-choice grade for general steel work — continuous through interrupted cuts across steel applications.Specifications Insert designation (ISO): TNMG 160408 Insert designation (inch):...

TNMG 160408 Chip Breaker BF Grade FM2553 / TNMG 332 BF #FMCarbide

$5.39 each

10 inserts per box

TNMG 160408 / TNMG 332, chip breaker BF, grade FM2553 — negative triangular turning insert.3/8" inscribed circle, 3/16" thick, 1/32" corner radius. The BF breaker is the finishing geometry: 0.002–0.010 ipr (0.05–0.25 mm/rev) at 0.02–0.06" (0.5–1.5 mm) depth of cut. FM2553 is a CVD (Al₂O₃) grade — tough substrate for...

TNMG 220408 Chip Breaker BG Grade FM2533 / TNMG 432 BG #FMCarbide

$10.44 each

10 inserts per box

TNMG 220408 / TNMG 432, chip breaker BG, grade FM2533 — negative triangular turning insert.1/2" inscribed circle, 3/16" thick, 1/32" corner radius. The BG breaker is the medium machining geometry: 0.008–0.016 ipr (0.2–0.4 mm/rev) at 0.06–0.16" (1.5–4 mm) depth of cut. FM2533 is a CVD grade — stable steel applications...

MTFNR 20-4D Tool Holder 0 End Cutting Edge Angle for Negative Triangle TNM_Inserts

$95.20 each

MTFNR 20-4D — toolholder, 1.250" square shank, 6.0" overall length. Made in the USA by RMC Tooling. 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...

MTANR163D Tool Holder 90° Lead Angle TNM 33 Insert

$79.05 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MTFNR204D Tool Holder 90° Lead Angle TNM 43 Insert

$86.86 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

TNMG 160412 Chip Breaker BC Grade FM2533 / TNMG 333 BC #FMCarbide

$5.39 each

10 inserts per box

TNMG 160412 / TNMG 333, chip breaker BC, grade FM2533 — negative triangular turning insert.3/8" inscribed circle, 3/16" thick, 3/64" corner radius. The BC breaker is the medium roughing & cast iron geometry: 0.008–0.020 ipr (0.2–0.5 mm/rev) at 0.06–0.16" (1.5–4 mm) depth of cut. FM2533 is a CVD grade —...

TNMG 160408 Chip Breaker BF Grade FM2543 / TNMG 332 BF #FMCarbide

$7.66 each

10 inserts per box

TNMG 160408 / TNMG 332, chip breaker BF, grade FM2543 — negative triangular turning insert.3/8" inscribed circle, 3/16" thick, 1/32" corner radius. The BF breaker is the finishing geometry: 0.002–0.010 ipr (0.05–0.25 mm/rev) at 0.02–0.06" (0.5–1.5 mm) depth of cut. FM2543 is a CVD grade — first-choice grade for general...

MTFNR163D Tool Holder 90° Lead Angle TNM 33 Insert

$79.05 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MTANL123B Tool Holder 90° Lead Angle TNM 33 Insert

$74.32 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

TNMG 220408 Chip Breaker BG FM524 / TNMG 432 BG #FMCarbide

$5.99 each

10 inserts per box

TNMG 220408 / TNMG 432, chip breaker BG, grade FM524 — negative triangular turning insert.1/2" inscribed circle, 3/16" thick, 1/32" corner radius. The BG breaker is the medium machining geometry: 0.008–0.016 ipr (0.2–0.4 mm/rev) at 0.06–0.16" (1.5–4 mm) depth of cut. FM524 is a CVD grade — gray cast iron...

TNMG 160404 Chip Breaker BG Grade FM2543 / TNMG 331 BG #FMCarbide

$7.66 each

10 inserts per box

TNMG 160404 / TNMG 331, chip breaker BG, grade FM2543 — negative triangular turning insert.3/8" inscribed circle, 3/16" thick, 1/64" corner radius. The BG breaker is the medium machining geometry: 0.008–0.016 ipr (0.2–0.4 mm/rev) at 0.06–0.16" (1.5–4 mm) depth of cut. FM2543 is a CVD grade — first-choice grade for...

TNMG 160408 Chip Breaker BG Grade FM2538 / TNMG 332 BG #FMCarbide

$7.66 each

10 inserts per box

TNMG 160408 / TNMG 332, chip breaker BG, grade FM2538 — negative triangular turning insert.3/8" inscribed circle, 3/16" thick, 1/32" corner radius. The BG breaker is the medium machining geometry: 0.008–0.016 ipr (0.2–0.4 mm/rev) at 0.06–0.16" (1.5–4 mm) depth of cut. FM2538 is a CVD grade — balanced productivity for...

TNMG 160408 Chip Breaker BC Grade FM2533 / TNMG 332 BC #FMCarbide

$7.66 each

10 inserts per box

TNMG 160408 / TNMG 332, chip breaker BC, grade FM2533 — negative triangular turning insert.3/8" inscribed circle, 3/16" thick, 1/32" corner radius. The BC breaker is the medium roughing & cast iron geometry: 0.008–0.020 ipr (0.2–0.5 mm/rev) at 0.06–0.16" (1.5–4 mm) depth of cut. FM2533 is a CVD grade —...

TNMG 160408 Chip Breaker BG Grade FM2543 / TNMG 332 BG #FMCarbide

$7.66 each

10 inserts per box

TNMG 160408 / TNMG 332, chip breaker BG, grade FM2543 — negative triangular turning insert.3/8" inscribed circle, 3/16" thick, 1/32" corner radius. The BG breaker is the medium machining geometry: 0.008–0.016 ipr (0.2–0.4 mm/rev) at 0.06–0.16" (1.5–4 mm) depth of cut. FM2543 is a CVD grade — first-choice grade for...

MTFNL163D Tool Holder 90° Lead Angle TNM 33 Insert

$79.05 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MTFNR123B Tool Holder 90° Lead Angle TNM 33 Insert

$74.32 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

TNMG 160412 Chip Breaker BC FM2543 / TNMG 333 BC #FMCarbide

$5.39 each

10 inserts per box

TNMG 160412 / TNMG 333, chip breaker BC, grade FM2543 — negative triangular turning insert.3/8" inscribed circle, 3/16" thick, 3/64" corner radius. The BC breaker is the medium roughing & cast iron geometry: 0.008–0.020 ipr (0.2–0.5 mm/rev) at 0.06–0.16" (1.5–4 mm) depth of cut. FM2543 is a CVD grade —...

MTGNR103B Tool Holder 90° Lead Angle TNM 33 Insert

$64.95 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

TNMG 220408 Chip Breaker BG Grade FM2553 / TNMG 432 BG #FMCarbide

$10.44 each

10 inserts per box

TNMG 220408 / TNMG 432, chip breaker BG, grade FM2553 — negative triangular turning insert.1/2" inscribed circle, 3/16" thick, 1/32" corner radius. The BG breaker is the medium machining geometry: 0.008–0.016 ipr (0.2–0.4 mm/rev) at 0.06–0.16" (1.5–4 mm) depth of cut. FM2553 is a CVD (Al₂O₃) grade — tough substrate...

TNMG 160408 Chip Breaker BM Grade FM2538 / TNMG 332 BM #FMCarbide

$5.39 each

10 inserts per box

TNMG 160408 / TNMG 332, chip breaker BM, grade FM2538 — negative triangular turning insert.3/8" inscribed circle, 3/16" thick, 1/32" corner radius. FM2538 is a CVD grade — balanced productivity for continuous cuts — high wear resistance with improved toughness.Specifications Insert designation (ISO): TNMG 160408 Insert designation (inch): TNMG 332...

TNMG 160412 Chip Breaker BC FM2553 / TNMG 333 BC #FMCarbide

$5.39 each

10 inserts per box

TNMG 160412 / TNMG 333, chip breaker BC, grade FM2553 — negative triangular turning insert.3/8" inscribed circle, 3/16" thick, 3/64" corner radius. The BC breaker is the medium roughing & cast iron geometry: 0.008–0.020 ipr (0.2–0.5 mm/rev) at 0.06–0.16" (1.5–4 mm) depth of cut. FM2553 is a CVD (Al₂O₃) grade...

PSC50-DTFNL35060-22 PSC Modular Toolholder, 90° Lead Angle, Left Hand

$295.75 each

Canela reference PSC50-DTFNL35060-22 — PSC modular toolholder, left hand. Toolholder for face turning applications equipped with triangular negative inserts. PSC with internal coolant. The PSC polygonal shank coupling (ISO 26623-1) clamps from inside, so the head changes in seconds and repeats to the micron.Specifications Reference: PSC50-DTFNL35060-22 Coupling: PSC 50 (ISO...

MTFNL123B Tool Holder 90° Lead Angle TNM 33 Insert

$74.32 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MTGNL123B Tool Holder 90° Lead Angle TNM 33 Insert

$74.32 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

TNMG 160408 Chip Breaker BC Grade FM2543 / TNMG 332 BC #FMCarbide

$5.39 each

10 inserts per box

TNMG 160408 / TNMG 332, chip breaker BC, grade FM2543 — negative triangular turning insert.3/8" inscribed circle, 3/16" thick, 1/32" corner radius. The BC breaker is the medium roughing & cast iron geometry: 0.008–0.020 ipr (0.2–0.5 mm/rev) at 0.06–0.16" (1.5–4 mm) depth of cut. FM2543 is a CVD grade —...

TNMG 160408 Chip Breaker BF Grade FM2533 / TNMG 332 BF #FMCarbide

$7.66 each

10 inserts per box

TNMG 160408 / TNMG 332, chip breaker BF, grade FM2533 — negative triangular turning insert.3/8" inscribed circle, 3/16" thick, 1/32" corner radius. The BF breaker is the finishing geometry: 0.002–0.010 ipr (0.05–0.25 mm/rev) at 0.02–0.06" (0.5–1.5 mm) depth of cut. FM2533 is a CVD grade — stable steel applications and...

PSC50-DTGNL35060-22 PSC Modular Toolholder, 90° Lead Angle, Left Hand

$295.75 each

Canela reference PSC50-DTGNL35060-22 — PSC modular toolholder, left hand. Toolholder for external turning applications equipped with triangular negative inserts. PSC with internal coolant. The PSC polygonal shank coupling (ISO 26623-1) clamps from inside, so the head changes in seconds and repeats to the micron.Specifications Reference: PSC50-DTGNL35060-22 Coupling: PSC 50 (ISO...

PSC50-DTGNL35060-16 PSC Modular Toolholder, 90° Lead Angle, Left Hand

$295.75 each

Canela reference PSC50-DTGNL35060-16 — PSC modular toolholder, left hand. Toolholder for external turning applications equipped with triangular negative inserts. PSC with internal coolant. The PSC polygonal shank coupling (ISO 26623-1) clamps from inside, so the head changes in seconds and repeats to the micron.Specifications Reference: PSC50-DTGNL35060-16 Coupling: PSC 50 (ISO...

A24U-MTFN L 4 - 90° Side & End Cutting Edge Angle

$328.65 each

Left Hand Boring Bar A24U-MTFN 4 - 90° Side & End Cutting Edge Angle - OAL = 14" Cutting Length = 3" Internal turning and profiling boring bar equipped with triangular negative double-sided insert. Specifications Model: A24U-MTFNL4 Bar diameter (D): 1.500" Minimum bore (A): 1.780" Overall length (L1): 14.00" Head...

PSC50-DTGNR35060-22 PSC Modular Toolholder, 90° Lead Angle, Right Hand

$295.75 each

Canela reference PSC50-DTGNR35060-22 — PSC modular toolholder, right hand. Toolholder for external turning applications equipped with triangular negative inserts. PSC with internal coolant. The PSC polygonal shank coupling (ISO 26623-1) clamps from inside, so the head changes in seconds and repeats to the micron.Specifications Reference: PSC50-DTGNR35060-22 Coupling: PSC 50 (ISO...

PSC50-DTFNR35060-22 PSC Modular Toolholder, 90° Lead Angle, Right Hand

$295.75 each

Canela reference PSC50-DTFNR35060-22 — PSC modular toolholder, right hand. Toolholder for face turning applications equipped with triangular negative inserts. PSC with internal coolant. The PSC polygonal shank coupling (ISO 26623-1) clamps from inside, so the head changes in seconds and repeats to the micron.Specifications Reference: PSC50-DTFNR35060-22 Coupling: PSC 50 (ISO...

PSC50-DTGNR35060-16 PSC Modular Toolholder, 90° Lead Angle, Right Hand

$295.75 each

Canela reference PSC50-DTGNR35060-16 — PSC modular toolholder, right hand. Toolholder for external turning applications equipped with triangular negative inserts. PSC with internal coolant. The PSC polygonal shank coupling (ISO 26623-1) clamps from inside, so the head changes in seconds and repeats to the micron.Specifications Reference: PSC50-DTGNR35060-16 Coupling: PSC 50 (ISO...

PSC50-MTFNL27140-16 PSC Modular Boring Bar, 1.969" Min. Bore, 90° Lead Angle, Left Hand

$414.20 each

Canela reference PSC50-MTFNL27140-16 — PSC modular boring bar, left hand. Internal turning and profiling boring bar equipped with triangular negative double-sided insert. PSC with internal coolant. The PSC polygonal shank coupling (ISO 26623-1) clamps from inside, so the bar changes in seconds and repeats to the micron.Specifications Reference: PSC50-MTFNL27140-16 Coupling:...

PSC50-DTFNL35060-16 PSC Modular Toolholder, 90° Lead Angle, Left Hand

$295.75 each

Canela reference PSC50-DTFNL35060-16 — PSC modular toolholder, left hand. Toolholder for face turning applications equipped with triangular negative inserts. PSC with internal coolant. The PSC polygonal shank coupling (ISO 26623-1) clamps from inside, so the head changes in seconds and repeats to the micron.Specifications Reference: PSC50-DTFNL35060-16 Coupling: PSC 50 (ISO...

PSC50-DTFNR35060-16 PSC Modular Toolholder, 90° Lead Angle, Right Hand

$295.75 each

Canela reference PSC50-DTFNR35060-16 — PSC modular toolholder, right hand. Toolholder for face turning applications equipped with triangular negative inserts. PSC with internal coolant. The PSC polygonal shank coupling (ISO 26623-1) clamps from inside, so the head changes in seconds and repeats to the micron.Specifications Reference: PSC50-DTFNR35060-16 Coupling: PSC 50 (ISO...

A24U-MTFN R 4 - 90° Side & End Cutting Edge Angle

$328.65 each

Right Hand Boring Bar A24U-MTFN 4 - 90° Side & End Cutting Edge Angle - OAL = 14" Cutting Length = 3" Internal turning and profiling boring bar equipped with triangular negative double-sided insert. Specifications Model: A24U-MTFNR4 Bar diameter (D): 1.500" Minimum bore (A): 1.780" Overall length (L1): 14.00" Head...