Search results for "TNMA 43NGR"

S24U-MTUNR4 Boring Bar — Canela, FM Carbide

S16T-MTUNR3 Boring Bar 93° Lead Angle TNM 33 Insert

$243.79

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...
S24U-MWLNR4 Boring Bar — Canela, FM Carbide

S16T-MWLNR4 Boring Bar 95° Lead Angle WNMG 43 Insert

$243.79

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...
MWLN cartridge - Canela, FM Carbide

MWLNL12CA-4C Cartridge 95° Lead Angle WNMG 43 Insert

$154.92

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MWLNL12CA-4C Dimension D: 1.969" Length (L): 2.165" Length (L1): 1.378" Width (b): 0.630" Dimension...
MDJNR855D Tool Holder — Canela, FM Carbide

MDJNR083A Tool Holder 93° Lead Angle DN 33 Insert

$101.96

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
SIMDJNR Boring Bar

SIMDJNR 40-4 Indexable Boring Bar for CNC Turning

$461.36 $747.40

SIMDJNR 40-4 — boring bar, 2-1/2" bar diameter. Made in the USA by RMC Tooling. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a rigid clamping system sized to the bar diameter — the combination that keeps chatter down at...
MTFNR Interchangeable Head

H40 MTFNR 4 Interchangeable Head for CNC Turning

$490.38 $794.42

H40 MTFNR 4 — interchangeable head, 2.500" head diameter, 3.030" minimum bore. Made in the USA by RMC Tooling. H-MTFNR/L Heads. Interchangeable boring head from RMC Tooling, machined in the United States. The head mounts on a matching RMC bar, so one bar covers a whole family of geometries and...
MTJNLS 12-3B Tool Holder — Canela, FM Carbide

MTJNLS 12-3B Tool Holder 93° End Cutting Edge Angle TNM_ 33 Insert

$81.68

Left Hand Tool Holder MTJN L S 12-3B - OAL = 4.5" - F = 1" - A = 0.75"Multipurpose toolholder equipped with triangular negative double-sided inserts with strong cutting edges. Profiling and copying toolholder for specific applications, roughing, semifinishing and finishing. ​Inserts that fit this toolBy its ANSI designation...
MCGNR246D Tool Holder — Canela, FM Carbide

MCGNR164D Tool Holder 90° Lead Angle CN 43 Insert

$79.05

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
MSSNR866E Tool Holder — Canela, FM Carbide

MSSNR164D Tool Holder 45° Lead Angle SNM 43 Insert

$79.05

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
MTFN toolholder - Canela, FM Carbide

MTFNR163D Tool Holder 90° Lead Angle TNM 33 Insert

$79.05

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
Canela CNMG431CC 80 degree rhombic turning insert, grade NC25

CNMG 431 Turning Insert, CC Chipbreaker, 0.016" Corner Radius, Grade NC25

$9.41

Canela reference CNMG431CC — 80° rhombic turning insert, grade NC25. Original Canela indexable insert, 0.508" cutting edge and 0.016" corner radius. Sold individually, no minimum order.Specifications Reference: CNMG431CC Insert shape: 80° rhombic (C) Clearance angle: 0° Chipbreaker: CC Cutting edge length (l): 0.508" Thickness (T): 0.187" Inscribed circle (d): 0.500"...
MRGNR864D Tool Holder — Canela, FM Carbide

MRGNR123B Tool Holder RNMG 32 Insert

$74.32

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
MVJNR864D Tool Holder — Canela, FM Carbide

MVJNR123B Tool Holder 93° Lead Angle VN 33 Insert

$121.08

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
DDJNR244EN Tool Holder — Canela, FM Carbide

DDJNL204DN Tool Holder 93° Lead Angle DN 43 Insert

$135.17

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
S40V-MVUNR4 Boring Bar — Canela, FM Carbide

S40V-MVUNR4 Boring Bar 93° Lead Angle VN 43 Insert

$442.99

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...
DWLNR244EN Tool Holder — Canela, FM Carbide

DWLNR124BAN Tool Holder 95° Lead Angle WNMG 43 Insert

$118.06

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
MDPNN865D Tool Holder — Canela, FM Carbide

MDPNN164D Tool Holder DN 43 Insert

$117.45

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
MDQNR244E Tool Holder — Canela, FM Carbide

MDQNR124B Tool Holder DN 43 Insert

$114.97

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
Canela SNMM856 square turning insert, grade TN30

SNMM 856 Turning Insert, 0.094" Corner Radius, Grade TN30

$49.76

Canela reference SNMM856 — square turning insert, grade TN30. Original Canela indexable insert, 1.000" cutting edge and 0.094" corner radius. Sold individually, no minimum order.Specifications Reference: SNMM856 Insert shape: square (S) Clearance angle: 0° Cutting edge length (l): 1.000" Thickness (T): 0.312" Inscribed circle (d): 1.000" Corner radius (r): 0.094"...
S24U-MTUNR4 Boring Bar — Canela, FM Carbide

S24U-MTUNL4 Boring Bar 93° Lead Angle TNM 43 Insert

$285.91

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...
WWLN boring bar - Canela, FM Carbide

S24U-WWLNR4 Boring Bar 95° Lead Angle WNMG 43 Insert

$285.91

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...
MDJNR855D Tool Holder — Canela, FM Carbide

MDJNR103B Tool Holder 93° Lead Angle DN 33 Insert

$107.07

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
S24U-DCLNR4N Boring Bar — Canela, FM Carbide

DCLNR164DAN Tool Holder 95° Lead Angle CN 43 Insert

$125.34

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
MCMNN854D Tool Holder — Canela, FM Carbide

MCMNN854D Tool Holder 50° Lead Angle CN 43 Insert

$103.97

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
MRGNR864D Tool Holder — Canela, FM Carbide

MRGNR205D Tool Holder RNMG 54 Insert

$103.97

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
DDJNR244EN Tool Holder — Canela, FM Carbide

DDJNL164DN Tool Holder 93° Lead Angle DN 43 Insert

$122.09

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
MVJNR864D Tool Holder — Canela, FM Carbide

MVJNR164D Tool Holder 93° Lead Angle VN 43 Insert

$123.17

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
NSR Tool Holder

NSR 12-3B Indexable Tool Holder for CNC Turning

$92.32 $149.56

NSR 12-3B — toolholder, 0.750" square shank, 4.5" overall length. Made in the USA by RMC Tooling. External Toolholder for Threading & Grooving NG Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool goes back...
NSR Tool Holder

NSR 16-2D Indexable Tool Holder for CNC Turning

$92.32 $149.56

NSR 16-2D — toolholder, 1.000" square shank, 6.0" overall length. Made in the USA by RMC Tooling. External Toolholder for Threading & Grooving NG Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool goes back...
NSR Tool Holder

NSR 16-3D Indexable Tool Holder for CNC Turning

$92.32 $149.56

NSR 16-3D — toolholder, 1.000" square shank, 6.0" overall length. Made in the USA by RMC Tooling. External Toolholder for Threading & Grooving NG Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool goes back...
Canela SNMG432MHC square turning insert, grade TN20

SNMG 432 Turning Insert, MHC Chipbreaker, 0.031" Corner Radius, Grade TN20

$9.62

Canela reference SNMG432MHC — square turning insert, grade TN20. Original Canela indexable insert, 0.500" cutting edge and 0.031" corner radius. Sold individually, no minimum order.Specifications Reference: SNMG432MHC Insert shape: square (S) Clearance angle: 0° Chipbreaker: MHC Cutting edge length (l): 0.500" Thickness (T): 0.187" Inscribed circle (d): 0.500" Corner radius...