Search results for "DN 54"

MDPNN245E Tool Holder DN 54 Insert

$165.29

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MDJNR245D Tool Holder 93° Lead Angle DN 54 Insert

$165.29

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

S40V-MDUNR5 Boring Bar 93° Lead Angle DN 54 Insert

$443.46

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...

MDJNL245D Tool Holder 93° Lead Angle DN 54 Insert

$165.29

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MDPNN865D Tool Holder DN 54 Insert

$165.29

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MDJNL205D Tool Holder 93° Lead Angle DN 54 Insert

$155.92

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MDPNN205D Tool Holder DN 54 Insert

$155.92

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MDPNN855D Tool Holder DN 54 Insert

$145.55

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MDJNR205D Tool Holder 93° Lead Angle DN 54 Insert

$155.92

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MDJNR855D Tool Holder 93° Lead Angle DN 54 Insert

$145.55

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MDPNN165D Tool Holder DN 54 Insert

$140.83

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MDJNL855D Tool Holder 93° Lead Angle DN 54 Insert

$145.55

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MDJNL165D Tool Holder 93° Lead Angle DN 54 Insert

$140.83

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

S32V-MDUNR5 Boring Bar 93° Lead Angle DN 54 Insert

$382.14

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...

MDJNR165D Tool Holder 93° Lead Angle DN 54 Insert

$140.83

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

S32V-MDUNL5 Boring Bar 93° Lead Angle DN 54 Insert

$382.14

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...

S40V-MDUNL5 Boring Bar 93° Lead Angle DN 54 Insert

$443.46

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...

SIMDJNR 24-4 -3° Side & End Cutting Edge Angle for Negative 55° Diamond DNM_ Inserts

$346.17 $560.80

SIMDJNR 24-4 — boring bar, 1.50" bar diameter, 2.250" minimum bore, 14.0" overall length. Made in the USA by RMC Tooling. -3° End Cutting Edge Angle for Negative 55° Diamond DNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and...

MDPNN 24-5E Tool Holder 27.5 Side Cutting Edge Angle for Negative 55 Diamond DNM_Inserts

$138.47 $224.32

MDPNN 24-5E — toolholder, 1.50" square shank, 7.0" overall length. Made in the USA by RMC Tooling. 27.5° Side Cutting Edge Angle for Negative 55° Diamond DNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the...

MDQNR 24-4D Tool Holder 17.5 Side Cutting Edge Angle for Negative 55 Diamond DNM_Inserts

$160.30 $259.68

MDQNR 24-4D — toolholder, 1.50" square shank, 6.0" overall length. Made in the USA by RMC Tooling. 17.5° Side Cutting Edge Angle for Negative 55° Diamond DNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the...

MDPNN 16-5D Tool Holder 27.5 Side Cutting Edge Angle for Negative 55 Diamond DNM_Inserts

$129.80 $210.28

MDPNN 16-5D — toolholder, 1.00" square shank, 6.0" overall length. Made in the USA by RMC Tooling. 27.5° Side Cutting Edge Angle for Negative 55° Diamond DNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the...

DSDNN206DAN Tool Holder 45° Lead Angle SNM 64 Insert

$158.09

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

DSDNN164DAN Tool Holder 45° Lead Angle SNM 43 Insert

$125.34

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

DSDNN205DAN Tool Holder 45° Lead Angle SNM 54 Insert

$158.09

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

DSRNL205DAN Tool Holder 75° Lead Angle SNM 54 Insert

$158.09

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

DCLNR205DAN Tool Holder 95° Lead Angle CN 54 Insert

$158.09

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MSDNN855D Tool Holder 45° Lead Angle SNM 54 Insert

$103.97

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

DSRNR205DAN Tool Holder 75° Lead Angle SNM 54 Insert

$158.09

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

DSSNR164DN Tool Holder 45° Lead Angle SNM 43 Insert

$82.22

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

S24U-DDUNR4N Boring Bar 93° Lead Angle DN 43 Insert

$314.55

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...

DDJNR124BN Tool Holder 93° Lead Angle DN 43 Insert

$119.54

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

DCLNR245EAN Tool Holder 95° Lead Angle CN 54 Insert

$186.19

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MDJNR20CA-4C Cartridge 93° Lead Angle DN 43 Insert

$169.47

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MDJNR20CA-4C Dimension D: 2.756" Length (L): 2.756" Length (L1): 1.575" Width (b): 0.787" Dimension...

MSSNR20CA-5C Cartridge 45° Lead Angle SNMG 54 Insert

$169.47

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSSNR20CA-5C Dimension D: 2.756" Length (L): 2.362" Length (L1): 1.181" Width (b): 0.787" Dimension...

DDJNR164DAN Tool Holder 93° Lead Angle DN 43 Insert

$187.20

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MSDNN205D Tool Holder 45° Lead Angle SNM 54 Insert

$103.97

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MSDNN165D Tool Holder 45° Lead Angle SNM 54 Insert

$94.61

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

DDJNL164DAN Tool Holder 93° Lead Angle DN 43 Insert

$187.20

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

DDJNR244EAN Tool Holder 93° Lead Angle DN 43 Insert

$219.95

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

DDJNR244EN Tool Holder 93° Lead Angle DN 43 Insert

$143.54

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

DDJNR164DN Tool Holder 93° Lead Angle DN 43 Insert

$122.09

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

DDJNR204DAN Tool Holder 93° Lead Angle DN 43 Insert

$207.41

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MDJNR16CA-4C Cartridge 93° Lead Angle DN 43 Insert

$154.92

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MDJNR16CA-4C Dimension D: 2.362" Length (L): 2.480" Length (L1): 1.497" Width (b): 0.787" Dimension...

DDJNL244EAN Tool Holder 93° Lead Angle DN 43 Insert

$219.95

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

DDJNL164DN Tool Holder 93° Lead Angle DN 43 Insert

$122.09

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MDPNN164D Tool Holder DN 43 Insert

$117.45

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MDQNR124B Tool Holder DN 43 Insert

$114.97

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MDJNL244D Tool Holder 93° Lead Angle DN 43 Insert

$165.29

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MDJNR244D Tool Holder 93° Lead Angle DN 43 Insert

$165.29

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

DDJNR204DN Tool Holder 93° Lead Angle DN 43 Insert

$135.17

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...