Search results for "RCMM 84"

PROON 24-8E Tool Holder Neutral Shank for Profiling RCMM Inserts

$109.60 $177.56

PROON 24-8E — toolholder. Made in the USA by RMC Tooling. Neutral Shank for Profiling RCMM Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool goes back into the turret at the same cutting-point location...

PROON 20-8E Tool Holder Neutral Shank for Profiling RCMM Inserts

$95.20 $154.22

PROON 20-8E — toolholder. Made in the USA by RMC Tooling. Neutral Shank for Profiling RCMM Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool goes back into the turret at the same cutting-point location...

PROON 85-4D Tool Holder Neutral Shank for Profiling RCMM Inserts

$92.32 $149.56

PROON 85-4D — toolholder. Made in the USA by RMC Tooling. Neutral Shank for Profiling RCMM Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool goes back into the turret at the same cutting-point location...

PROON 20-8D Indexable Tool Holder for CNC Turning

$95.20 $154.22

PROON 20-8D — toolholder, 1-1/4" square shank, 6.0" overall length. Made in the USA by RMC Tooling. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool goes back into the turret at the same cutting-point location...

PROON 20-4E Tool Holder Neutral Shank for Profiling RCMM Inserts

$95.20 $154.22

PROON 20-4E — toolholder. Made in the USA by RMC Tooling. Neutral Shank for Profiling RCMM Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool goes back into the turret at the same cutting-point location...

SIMCLNR 24-4 -5° Side & End Cutting Edge Angle for Negative 80° Diamond CNM_ Inserts

$317.30 $514.02

SIMCLNR 24-4 — boring bar, 1.50" bar diameter, 1.780" minimum bore, 14.0" overall length. Made in the USA by RMC Tooling. -5° Side & End Cutting Edge Angle for Negative 80° Diamond CNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable...

MCKNR 85-4D Tool Holder 15 End Cutting Edge Angle for Negative 80 Diamond CNM_ Inserts

$95.20 $154.22

MCKNR 85-4D — toolholder, 1.00" × 1.25" shank (width × height), 6.0" overall length. Made in the USA by RMC Tooling. 15° End Cutting Edge Angle for Negative 80° Diamond CNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified...

MCRNR 85-4D Tool Holder 15 Side Cutting Edge Angle for Negative 80 Diamond CNM_Inserts

$95.20 $154.22

MCRNR 85-4D — toolholder, 1.00" × 1.25" shank (width × height), 6.0" overall length. Made in the USA by RMC Tooling. 15° Side Cutting Edge Angle for Negative 80° Diamond CNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified...

MCYNN 85-4D Tool Holder 50 Side Cutting Edge Angle for Negative 80 Diamond CNM_Inserts

$110.11 $178.38

MCYNN 85-4D — toolholder, 1.00" × 1.25" shank (width × height), 6.0" overall length. Made in the USA by RMC Tooling. 50° Side Cutting Edge Angle for Negative 80° Diamond CNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified...

SIMCLNR 28-4 -5° Side & End Cutting Edge Angle for Negative 80° Diamond CNM_ Inserts

$331.74 $537.42

SIMCLNR 28-4 — boring bar, 1.75" bar diameter, 2.030" minimum bore, 14.0" overall length. Made in the USA by RMC Tooling. -5° Side & End Cutting Edge Angle for Negative 80° Diamond CNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable...

MCLNR 85-4D Tool Holder -5 End Cutting Edge Angle for Negative 80 Diamond CNM_ Inserts

$92.32 $149.56

MCLNR 85-4D — toolholder, 1.000" × 1.250" shank (width × height), 6.0" overall length. Made in the USA by RMC Tooling. -5° End or Side Cutting Edge Angle for Negative 80° Diamond CNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to...

SIMCLNL 32-4 -5° Side & End Cutting Edge Angle for Negative 80° Diamond CNM_ Inserts

$360.60 $584.18

SIMCLNL 32-4 — boring bar, 2.00" bar diameter, 2.562" minimum bore, 16.0" overall length. Made in the USA by RMC Tooling. -5° Side & End Cutting Edge Angle for Negative 80° Diamond CNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable...

SIMCLNR 40-6 -5° Side & End Cutting Edge Angle for Negative 80° Diamond CNM_ Inserts

$432.70 $700.98

SIMCLNR 40-6 — boring bar, 2.50" bar diameter, 3.062" minimum bore, 16.0" overall length. Made in the USA by RMC Tooling. -5° Side & End Cutting Edge Angle for Negative 80° Diamond CNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable...

MCMNN 12-4B Tool Holder 40 Side Cutting Edge Angle for Negative 80 Diamond CNM_Inserts

$76.46 $123.86

MCMNN 12-4B — toolholder, 0.75" square shank, 4.5" overall length. Made in the USA by RMC Tooling. 40° Side Cutting Edge Angle for Negative 80° Diamond CNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the...

MCMNN 24-5D Tool Holder 40 Side Cutting Edge Angle for Negative 80 Diamond CNM_Inserts

$133.56 $216.36

MCMNN 24-5D — toolholder, 1.50" square shank, 6.0" overall length. Made in the USA by RMC Tooling. 40° Side Cutting Edge Angle for Negative 80° Diamond CNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the...

MCMNN 24-6E Tool Holder 40 Side Cutting Edge Angle for Negative 80 Diamond CNM_Inserts

$133.56 $216.36

MCMNN 24-6E — toolholder, 1.50" square shank, 7.0" overall length. Made in the USA by RMC Tooling. 40° Side Cutting Edge Angle for Negative 80° Diamond CNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the...

MRGNL 85-4D Tool Holder 0 Side Cutting Edge Angle for Negative Round RNM_Inserts

$92.32 $149.56

MRGNL 85-4D — toolholder, 1.000" × 1.250" shank (width × height), 6.0" overall length. Made in the USA by RMC Tooling. 0° Side Cutting Edge Angle for Negative Round RNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference...

MCRNL 85-4D Tool Holder 15 Side Cutting Edge Angle for Negative 80 Diamond CNM_Inserts

$95.20 $154.22

MCRNL 85-4D — toolholder, 1.00" × 1.25" shank (width × height), 6.0" overall length. Made in the USA by RMC Tooling. 15° Side Cutting Edge Angle for Negative 80° Diamond CNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified...

H24 SCLCR 4 Interchangeable Head for CNC Turning

$388.51 $629.38

H24 SCLCR 4 — interchangeable head, 1-1/2" head diameter. Made in the USA by RMC Tooling. Interchangeable boring head from RMC Tooling, machined in the United States. The head mounts on a matching RMC bar, so one bar covers a whole family of geometries and you only buy the cutting...

MSSNR 85-4DTool Holder 45 Side Cutting Edge Angle for Negative Square SNM_Inserts

$120.20 $194.72

MSSNR 85-4D — toolholder, 1.00" × 1.25" shank (width × height), 6.0" overall length. Made in the USA by RMC Tooling. 45° Side Cutting Edge Angle for Negative Square SNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference...

MCFNR 85-4D Tool Holder 0 End Cutting Edge Angle for Negative 80 Diamond CNM_ Inserts

$95.20 $154.22

MCFNR 85-4D — toolholder, 1.00" × 1.25" shank (width × height), 6.0" overall length. Made in the USA by RMC Tooling. 0° End Cutting Edge Angle for Negative 80° Diamond CNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified...

SIMCLNL 24-4 -5° Side & End Cutting Edge Angle for Negative 80° Diamond CNM_ Inserts

$317.30 $514.02

SIMCLNL 24-4 — boring bar, 1.50" bar diameter, 1.780" minimum bore, 14.0" overall length. Made in the USA by RMC Tooling. -5° Side & End Cutting Edge Angle for Negative 80° Diamond CNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable...

H32 CTFPR 4W Interchangeable Head for CNC Turning

$464.43 $752.38

H32 CTFPR 4W — interchangeable head, 2.000" head diameter, 2.400" minimum bore. Made in the USA by RMC Tooling. H-CTFPR/L Heads. Interchangeable boring head from RMC Tooling, machined in the United States. The head mounts on a matching RMC bar, so one bar covers a whole family of geometries and...

SIMCLNR 32-4 -5° Side & End Cutting Edge Angle for Negative 80° Diamond CNM_ Inserts

$360.60 $584.18

SIMCLNR 32-4 — boring bar, 2.00" bar diameter, 2.562" minimum bore, 16.0" overall length. Made in the USA by RMC Tooling. -5° Side & End Cutting Edge Angle for Negative 80° Diamond CNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable...

S24 CTFPR 4 Indexable Boring Bar for CNC Turning

$412.57 $668.36

S24 CTFPR 4 — boring bar, 1.500" bar diameter, 2.060" minimum bore, 14.0" overall length. Made in the USA by RMC Tooling. -5° End Cutting Edge Angle for Positive Triangle TPG Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and...

MCKNL 85-4D Tool Holder 15 End Cutting Edge Angle for Negative 80 Diamond CNM_ Inserts

$95.20 $154.22

MCKNL 85-4D — toolholder, 1.00" × 1.25" shank (width × height), 6.0" overall length. Made in the USA by RMC Tooling. 15° End Cutting Edge Angle for Negative 80° Diamond CNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified...

MCFNL 85-4D Tool Holder 0 End Cutting Edge Angle for Negative 80 Diamond CNM_ Inserts

$92.32 $149.56

MCFNL 85-4D — toolholder, 1.00" × 1.25" shank (width × height), 6.0" overall length. Made in the USA by RMC Tooling. 0° End Cutting Edge Angle for Negative 80° Diamond CNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified...

RAL 85-4 Indexable Tool Holder for CNC Turning

$92.32 $149.56

RAL 85-4 — toolholder, 1.000" × 1.250" shank (width × height), 6.0" overall length. Made in the USA by RMC Tooling. 45° Side Cutting Edge Angle for Negative Round RNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference...

RAR 85-4 Indexable Tool Holder for CNC Turning

$85.25 $138.10

RAR 85-4 — toolholder, 1.000" × 1.250" shank (width × height), 6.0" overall length. Made in the USA by RMC Tooling. 45° Side Cutting Edge Angle for Negative Round RNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference...

SIMCLNL 28-4 -5° Side & End Cutting Edge Angle for Negative 80° Diamond CNM_ Inserts

$331.74 $537.42

SIMCLNL 28-4 — boring bar, 1.75" bar diameter, 2.030" minimum bore, 14.0" overall length. Made in the USA by RMC Tooling. -5° Side & End Cutting Edge Angle for Negative 80° Diamond CNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable...

SIMCLNR 20-4 -5° Side & End Cutting Edge Angle for Negative 80° Diamond CNM_ Inserts

$288.44 $467.28

SIMCLNR 20-4 — boring bar, 1.25" bar diameter, 1.530" minimum bore, 14.0" overall length. Made in the USA by RMC Tooling. -5° Side & End Cutting Edge Angle for Negative 80° Diamond CNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable...

PROON 16-4D Tool Holder Neutral Shank for Profiling RCMM Inserts

$86.53 $140.18

PROON 16-4D — toolholder. Made in the USA by RMC Tooling. Neutral Shank for Profiling RCMM Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool goes back into the turret at the same cutting-point location...

MCKNR 85-5D Tool Holder 15 End Cutting Edge Angle for Negative 80 Diamond CNM_ Inserts

$95.20 $154.22

MCKNR 85-5D — toolholder, 1.00" × 1.25" shank (width × height), 6.0" overall length. Made in the USA by RMC Tooling. 15° End Cutting Edge Angle for Negative 80° Diamond CNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified...

MRGNR 85-4D Tool Holder 0 Side Cutting Edge Angle for Negative Round RNM_Inserts

$92.32 $149.56

MRGNR 85-4D — toolholder, 1.000" × 1.250" shank (width × height), 6.0" overall length. Made in the USA by RMC Tooling. 0° Side Cutting Edge Angle for Negative Round RNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference...

SIMCLNL 16-3 -5° Side & End Cutting Edge Angle for Negative 80° Diamond CNM_ Inserts

$259.63 $420.60

SIMCLNL 16-3 — boring bar, 1.00" bar diameter, 1.280" minimum bore, 12.0" overall length. Made in the USA by RMC Tooling. -5° Side & End Cutting Edge Angle for Negative 80° Diamond CNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable...

MCMNN 16-4D Tool Holder 40 Side Cutting Edge Angle for Negative 80 Diamond CNM_Inserts

$86.53 $140.18

MCMNN 16-4D — toolholder, 1.00" square shank, 6.0" overall length. Made in the USA by RMC Tooling. 40° Side Cutting Edge Angle for Negative 80° Diamond CNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the...

H24 CTFPR 4W Interchangeable Head for CNC Turning

$403.86 $654.26

H24 CTFPR 4W — interchangeable head, 1.500" head diameter, 1.760" minimum bore. Made in the USA by RMC Tooling. H-CTFPR/L Heads. Interchangeable boring head from RMC Tooling, machined in the United States. The head mounts on a matching RMC bar, so one bar covers a whole family of geometries and...

SIMCLNL 40-6 -5° Side & End Cutting Edge Angle for Negative 80° Diamond CNM_ Inserts

$432.70 $700.98

SIMCLNL 40-6 — boring bar, 2.50" bar diameter, 3.062" minimum bore, 16.0" overall length. Made in the USA by RMC Tooling. -5° Side & End Cutting Edge Angle for Negative 80° Diamond CNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable...

MCGNR 85-4D Tool Holder 0 End Cutting Edge Angle for Negative 80 Diamond CNM_ Inserts

$77.44 $96.80

MCGNR 85-4D — toolholder, 1.00" × 1.25" shank (width × height), 6.0" overall length. Made in the USA by RMC Tooling. 0° Side Cutting Edge Angle for Negative 80° Diamond CNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified...

MCGNR 85-6D Tool Holder 0 End Cutting Edge Angle for Negative 80 Diamond CNM_ Inserts

$165.04 $267.36

MCGNR 85-6D — toolholder, 1.00" × 1.25" shank (width × height), 6.0" overall length. Made in the USA by RMC Tooling. 0° Side Cutting Edge Angle for Negative 80° Diamond CNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified...

SIMCLNL 16-4 -5° Side & End Cutting Edge Angle for Negative 80° Diamond CNM_ Inserts

$259.63 $420.60

SIMCLNL 16-4 — boring bar, 1.00" bar diameter, 1.280" minimum bore, 12.0" overall length. Made in the USA by RMC Tooling. -5° Side & End Cutting Edge Angle for Negative 80° Diamond CNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable...

H24 CTFPR 3W Interchangeable Head for CNC Turning

$435.47 $705.46

H24 CTFPR 3W — interchangeable head, 1.500" head diameter, 1.760" minimum bore. Made in the USA by RMC Tooling. H-CTFPR/L Heads. Interchangeable boring head from RMC Tooling, machined in the United States. The head mounts on a matching RMC bar, so one bar covers a whole family of geometries and...

SIMCLNL 32-5 -5° Side & End Cutting Edge Angle for Negative 80° Diamond CNM_ Inserts

$360.60 $584.18

SIMCLNL 32-5 — boring bar, 2.00" bar diameter, 2.562" minimum bore, 16.0" overall length. Made in the USA by RMC Tooling. -5° Side & End Cutting Edge Angle for Negative 80° Diamond CNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable...

MCKNL 85-5D Tool Holder 15 End Cutting Edge Angle for Negative 80 Diamond CNM_ Inserts

$79.85 $99.81

MCKNL 85-5D — toolholder, 1.00" × 1.25" shank (width × height), 6.0" overall length. Made in the USA by RMC Tooling. 15° End Cutting Edge Angle for Negative 80° Diamond CNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified...

MSSNL 85-4D Tool Holder 45 Side Cutting Edge Angle for Negative Square SNM_Inserts

$120.20 $194.72

MSSNL 85-4D — toolholder, 1.00" × 1.25" shank (width × height), 6.0" overall length. Made in the USA by RMC Tooling. 45° Side Cutting Edge Angle for Negative Square SNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference...

MCRNL 24-4E Tool Holder 15 Side Cutting Edge Angle for Negative 80 Diamond CNM_Inserts

$109.60 $177.56

MCRNL 24-4E — toolholder, 1.50" square shank, 7.0" overall length. Made in the USA by RMC Tooling. 15° Side Cutting Edge Angle for Negative 80° Diamond CNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the...

MCLNL 85-4D Tool Holder -5 End Cutting Edge Angle for Negative 80 Diamond CNM_ Inserts

$92.32 $149.56

MCLNL 85-4D — toolholder, 1.000" × 1.250" shank (width × height), 6.0" overall length. Made in the USA by RMC Tooling. -5° End or Side Cutting Edge Angle for Negative 80° Diamond CNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to...

SIMCLNL 20-4 -5° Side & End Cutting Edge Angle for Negative 80° Diamond CNM_ Inserts

$288.44 $467.28

SIMCLNL 20-4 — boring bar, 1.25" bar diameter, 1.530" minimum bore, 14.0" overall length. Made in the USA by RMC Tooling. -5° Side & End Cutting Edge Angle for Negative 80° Diamond CNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable...

S32 SCLCR 4 Indexable Boring Bar for CNC Turning

$408.70 $662.10

S32 SCLCR 4 — boring bar, 2" bar diameter. Made in the USA by RMC Tooling. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a rigid clamping system sized to the bar diameter — the combination that keeps chatter down...

S24 SCLCR 4 Indexable Boring Bar for CNC Turning

$388.51 $629.38

S24 SCLCR 4 — boring bar, 1.500" bar diameter, 1.780" minimum bore, 14.0" overall length. Made in the USA by RMC Tooling. -5° End & Side Cutting Edge Angle for 7° Positive 80°Diamond CC_T Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard...