Search results for "RNMG 54"

MRGNR864D Tool Holder — Canela, FM Carbide

MRGNL165D Tool Holder RNMG 54 Insert

$94.61

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
MRGNR864D Tool Holder — Canela, FM Carbide

MRGNL205D Tool Holder RNMG 54 Insert

$103.97

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
MRGNR864D Tool Holder — Canela, FM Carbide

MRGNR205D Tool Holder RNMG 54 Insert

$103.97

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
MRGNR864D Tool Holder — Canela, FM Carbide

MRGNR165D Tool Holder RNMG 54 Insert

$94.61

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
MRGNR Tool Holder

MRGNR 24-4E Tool Holder 0 Side Cutting Edge Angle for Negative Round RNM_Inserts

$109.60 $177.56

MRGNR 24-4E — toolholder, 1.500" square shank, 7.0" overall length. Made in the USA by RMC Tooling. 0° Side Cutting Edge Angle for Negative Round RNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...
MSSN cartridge - Canela, FM Carbide

MSSNR20CA-5C Cartridge 45° Lead Angle SNMG 54 Insert

$169.47

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSSNR20CA-5C Dimension D: 2.756" Length (L): 2.362" Length (L1): 1.181" Width (b): 0.787" Dimension...
MRGNR864D Tool Holder — Canela, FM Carbide

MRGNR124B Tool Holder RNMG 43 Insert

$74.32

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
MRGNL Tool Holder

MRGNL 24-8E Tool Holder 0 Side Cutting Edge Angle for Negative Round RNM_Inserts

$109.60 $177.56

MRGNL 24-8E — toolholder, 1.500" square shank, 7.0" overall length. Made in the USA by RMC Tooling. 0° Side Cutting Edge Angle for Negative Round RNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...
MRGNL Tool Holder

MRGNL 24-4E Tool Holder 0 Side Cutting Edge Angle for Negative Round RNM_Inserts

$109.60 $177.56

MRGNL 24-4E — toolholder, 1.500" square shank, 7.0" overall length. Made in the USA by RMC Tooling. 0° Side Cutting Edge Angle for Negative Round RNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...
MRGNR864D Tool Holder — Canela, FM Carbide

MRGNR164D Tool Holder RNMG 43 Insert

$79.05

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
MRGNR Tool Holder

MRGNR 24-8E Tool Holder 0 Side Cutting Edge Angle for Negative Round RNM_Inserts

$109.60 $177.56

MRGNR 24-8E — toolholder, 1.500" square shank, 7.0" overall length. Made in the USA by RMC Tooling. 0° Side Cutting Edge Angle for Negative Round RNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...
MRGNL Tool Holder

MRGNL 24-6E Tool Holder 0 Side Cutting Edge Angle for Negative Round RNM_Inserts

$109.60 $177.56

MRGNL 24-6E — toolholder, 1.500" square shank, 7.0" overall length. Made in the USA by RMC Tooling. 0° Side Cutting Edge Angle for Negative Round RNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...
MRGNR Tool Holder

MRGNR 12-4B Tool Holder 0 Side Cutting Edge Angle for Negative Round RNM_Inserts

$75.04 $121.56

MRGNR 12-4B — toolholder, 0.750" square shank, 4.5" overall length. Made in the USA by RMC Tooling. 0° Side Cutting Edge Angle for Negative Round RNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...
MRGNR Tool Holder

MRGNR 24-6E Tool Holder 0 Side Cutting Edge Angle for Negative Round RNM_Inserts

$109.60 $177.56

MRGNR 24-6E — toolholder, 1.500" square shank, 7.0" overall length. Made in the USA by RMC Tooling. 0° Side Cutting Edge Angle for Negative Round RNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...
MRGNR Tool Holder

MRGNR 16-4D Tool Holder 0 Side Cutting Edge Angle for Negative Round RNM_Inserts

$86.53 $140.18

MRGNR 16-4D — toolholder, 1.000" square shank, 6.0" overall length. Made in the USA by RMC Tooling. 0° Side Cutting Edge Angle for Negative Round RNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...
MRGNR Tool Holder

MRGNR 16-5D Tool Holder 0 Side Cutting Edge Angle for Negative Round RNM_Inserts

$86.53 $140.18

MRGNR 16-5D — toolholder, 1.000" square shank, 6.0" overall length. Made in the USA by RMC Tooling. 0° Side Cutting Edge Angle for Negative Round RNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...
MRGNR Tool Holder

MRGNR 20-5D Tool Holder 0 Side Cutting Edge Angle for Negative Round RNM_Inserts

$95.20 $154.22

MRGNR 20-5D — toolholder, 1.250" square shank, 6.0" overall length. Made in the USA by RMC Tooling. 0° Side Cutting Edge Angle for Negative Round RNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...
MRGNL Tool Holder

MRGNL 86-4E Tool Holder 0 Side Cutting Edge Angle for Negative Round RNM_Inserts

$77.44 $96.80

MRGNL 86-4E — toolholder, 1.000" × 1.500" shank (width × height), 7.0" overall length. Made in the USA by RMC Tooling. 0° Side Cutting Edge Angle for Negative Round RNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference...
NRR Interchangeable Head

H24 NRR 3 Interchangeable Head for CNC Turning

$460.11 $745.38

H24 NRR 3 — interchangeable head, 1.500" head diameter, 2.000" minimum bore. Made in the USA by RMC Tooling. H-NRR Heads. Interchangeable boring head from RMC Tooling, machined in the United States. The head mounts on a matching RMC bar, so one bar covers a whole family of geometries and...
MRGNR Tool Holder

MRGNR 12-3B Tool Holder 0 Side Cutting Edge Angle for Negative Round RNM_Inserts

$72.83 $117.98

MRGNR 12-3B — toolholder, 0.750" square shank, 4.5" overall length. Made in the USA by RMC Tooling. 0° Side Cutting Edge Angle for Negative Round RNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...
MRGNR Tool Holder

MRGNR 85-4D Tool Holder 0 Side Cutting Edge Angle for Negative Round RNM_Inserts

$92.32 $149.56

MRGNR 85-4D — toolholder, 1.000" × 1.250" shank (width × height), 6.0" overall length. Made in the USA by RMC Tooling. 0° Side Cutting Edge Angle for Negative Round RNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference...
MSSNR Tool Holder

MSSNR 24-8ETool Holder 45 Side Cutting Edge Angle for Negative Square SNM_Inserts

$109.60 $177.56

MSSNR 24-8E — toolholder, 1.50" square shank, 7.0" overall length. Made in the USA by RMC Tooling. 45° Side Cutting Edge Angle for Negative Square SNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...
MRGNR Tool Holder

MRGNR 10-4B Tool Holder 0 Side Cutting Edge Angle for Negative Round RNM_Inserts

$62.92 $78.65

MRGNR 10-4B — toolholder, 0.625" square shank, 4.5" overall length. Made in the USA by RMC Tooling. 0° Side Cutting Edge Angle for Negative Round RNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...
MRGNR Tool Holder

MRGNR 20-4D Tool Holder 0 Side Cutting Edge Angle for Negative Round RNM_Inserts

$95.20 $154.22

MRGNR 20-4D — toolholder, 1.250" square shank, 6.0" overall length. Made in the USA by RMC Tooling. 0° Side Cutting Edge Angle for Negative Round RNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...
MRGNR Tool Holder

MRGNR 85-5D Tool Holder 0 Side Cutting Edge Angle for Negative Round RNM_Inserts

$77.44 $96.80

MRGNR 85-5D — toolholder, 1.000" × 1.250" shank (width × height), 6.0" overall length. Made in the USA by RMC Tooling. 0° Side Cutting Edge Angle for Negative Round RNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference...
MRGNR864D Tool Holder — Canela, FM Carbide

MRGNL864D Tool Holder RNMG 43 Insert

$128.90

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
MSSN cartridge - Canela, FM Carbide

MSSNR16CA-4C Cartridge 45° Lead Angle SNMG 43 Insert

$154.92

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSSNR16CA-4C Dimension D: 2.362" Length (L): 2.087" Length (L1): 1.102" Width (b): 0.787" Dimension...
MRGNL Tool Holder

MRGNL 20-5D Tool Holder 0 Side Cutting Edge Angle for Negative Round RNM_Inserts

$95.20 $154.22

MRGNL 20-5D — toolholder, 1.250" square shank, 6.0" overall length. Made in the USA by RMC Tooling. 0° Side Cutting Edge Angle for Negative Round RNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...
MRGNL Tool Holder

MRGNL 85-4D Tool Holder 0 Side Cutting Edge Angle for Negative Round RNM_Inserts

$92.32 $149.56

MRGNL 85-4D — toolholder, 1.000" × 1.250" shank (width × height), 6.0" overall length. Made in the USA by RMC Tooling. 0° Side Cutting Edge Angle for Negative Round RNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference...
MRGNL Tool Holder

MRGNL 85-5D Tool Holder 0 Side Cutting Edge Angle for Negative Round RNM_Inserts

$77.44 $96.80

MRGNL 85-5D — toolholder, 1.000" × 1.250" shank (width × height), 6.0" overall length. Made in the USA by RMC Tooling. 0° Side Cutting Edge Angle for Negative Round RNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference...
MRGNR Tool Holder

MRGNR 16-6D Tool Holder 0 Side Cutting Edge Angle for Negative Round RNM_Inserts

$86.53 $140.18

MRGNR 16-6D — toolholder, 1.000" square shank, 6.0" overall length. Made in the USA by RMC Tooling. 0° Side Cutting Edge Angle for Negative Round RNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...
MRGNL Tool Holder

MRGNL 12-3B Tool Holder 0 Side Cutting Edge Angle for Negative Round RNM_Inserts

$72.83 $117.98

MRGNL 12-3B — toolholder, 0.750" square shank, 4.5" overall length. Made in the USA by RMC Tooling. 0° Side Cutting Edge Angle for Negative Round RNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...
MRGNL Tool Holder

MRGNL 10-4B Tool Holder 0 Side Cutting Edge Angle for Negative Round RNM_Inserts

$62.92 $78.65

MRGNL 10-4B — toolholder, 0.625" square shank, 4.5" overall length. Made in the USA by RMC Tooling. 0° Side Cutting Edge Angle for Negative Round RNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...
PSKNR25CA-15 Cartridge — Canela, FM Carbide

PSKNR25CA-15 Cartridge 75° Lead Angle SNMG 54 Insert

$234.43

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: PSKNR25CA-15 Dimension D: 3.937" Length (L): 3.937" Length (L1): 1.967" Width (b): 0.984" Dimension...
MRGNR Tool Holder

MRGNR 86-4E Tool Holder 0 Side Cutting Edge Angle for Negative Round RNM_Inserts

$77.44 $96.80

MRGNR 86-4E — toolholder, 1.000" × 1.500" shank (width × height), 7.0" overall length. Made in the USA by RMC Tooling. 0° Side Cutting Edge Angle for Negative Round RNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference...
MSRN cartridge - Canela, FM Carbide

MSRNR12CA-4C Cartridge 75° Lead Angle SNMG 43 Insert

$154.92

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSRNR12CA-4C Dimension D: 1.969" Length (L): 2.165" Length (L1): 1.378" Width (b): 0.630" Dimension...