Search results for "TNMA 322"

SIMTJNR 16-3 -3° End Cutting Edge Angle for Negative Triangle TNM_ Inserts

$259.63 $420.60

SIMTJNR 16-3 — boring bar, 1.00" bar diameter, 1.280" minimum bore, 12.0" overall length. Made in the USA by RMC Tooling. -3° End Cutting Edge Angle for Negative Triangle TNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a...

MTCNN 44-3D Tool Holder 0 Degree End Cutting Edge Angle for Negative Triangle TNM_Inserts

$124.70 $155.87

MTCNN 44-3D — toolholder, 0.50" × 1.00" shank (width × height), 6.0" overall length. Made in the USA by RMC Tooling. 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference...

SIMTJNR 20-3 -3° End Cutting Edge Angle for Negative Triangle TNM_ Inserts

$288.44 $467.28

SIMTJNR 20-3 — boring bar, 1.25" bar diameter, 1.530" minimum bore, 14.0" overall length. Made in the USA by RMC Tooling. -3° End Cutting Edge Angle for Negative Triangle TNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a...

MTENN 16-3D Tool Holder 30 Degree Side Cutting Edge Angle for Negative Triangle TNM_Inserts

$86.53 $140.18

MTENN 16-3D — toolholder, 1.000" square shank, 6.0" overall length. Made in the USA by RMC Tooling. 30° Side Cutting Edge Angle for Negative Triangle TNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...

MTANL 16-3D Tool Holder 0 Side Cutting Edge Angle for Negative Triangle TNM_Inserts

$86.53 $140.18

MTANL 16-3D — toolholder, 1.000" square shank, 6.0" overall length. Made in the USA by RMC Tooling. 0° Side Cutting Edge Angle for Negative Triangle TNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...

SIMTJNL 20-3 -3° End Cutting Edge Angle for Negative Triangle TNM_ Inserts

$288.44 $467.28

SIMTJNL 20-3 — boring bar, 1.25" bar diameter, 1.530" minimum bore, 14.0" overall length. Made in the USA by RMC Tooling. -3° End Cutting Edge Angle for Negative Triangle TNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a...

MTRNR 16-3D Tool Holder 15 DEGREE Side Cutting Edge Angle for Negative Triangle TNM_Inserts

$81.64 $132.26

MTRNR 16-3D — toolholder, 1.000" square shank, 6.0" overall length. Made in the USA by RMC Tooling. 15° Side Cutting Edge Angle for Negative Triangle TNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...

MTJNR 12-3B Tool Holder 3 Side Cutting Edge Angle for Negative Triangle TNM_Inserts

$75.04 $121.56

MTJNR 12-3B — toolholder, 0.750" square shank, 4.5" overall length. Made in the USA by RMC Tooling. 3°Side Cutting Edge Angle for Negative Triangle TNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool goes...

MTJNR 16-3D Tool Holder 3 Side Cutting Edge Angle for Negative Triangle TNM_Inserts

$86.53 $140.18

MTJNR 16-3D — toolholder, 1.000" square shank, 6.0" overall length. Made in the USA by RMC Tooling. 3°Side Cutting Edge Angle for Negative Triangle TNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool goes...

MTENN 12-3B Tool Holder 30 Degree Side Cutting Edge Angle for Negative Triangle TNM_Inserts

$75.04 $121.56

MTENN 12-3B — toolholder, 0.750" square shank, 4.5" overall length. Made in the USA by RMC Tooling. 30° Side Cutting Edge Angle for Negative Triangle TNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...

MTANR 16-3D Tool Holder 0 Side Cutting Edge Angle for Negative Triangle TNM_Inserts

$86.53 $140.18

MTANR 16-3D — toolholder, 1.000" square shank, 6.0" overall length. Made in the USA by RMC Tooling. 0° Side Cutting Edge Angle for Negative Triangle TNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...

MTCNN 44-3F Tool Holder 0 Degree End Cutting Edge Angle for Negative Triangle TNM_Inserts

$247.19 $308.99

MTCNN 44-3F — toolholder, 0.50" × 1.00" shank (width × height), 8.0" overall length. Made in the USA by RMC Tooling. 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference...

MTANL 12-3B Tool Holder 0 Side Cutting Edge Angle for Negative Triangle TNM_Inserts

$75.04 $121.56

MTANL 12-3B — toolholder, 0.750" square shank, 4.5" overall length. Made in the USA by RMC Tooling. 0° Side Cutting Edge Angle for Negative Triangle TNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...

MTJNL 12-3B Tool Holder 3 Side Cutting Edge Angle for Negative Triangle TNM_Inserts

$75.04 $121.56

MTJNL 12-3B — toolholder, 0.750" square shank, 4.5" overall length. Made in the USA by RMC Tooling. 3°Side Cutting Edge Angle for Negative Triangle TNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool goes...

MTGNR 10-3B Tool Holder 0 Side Cutting Edge Angle for Negative Triangle TNM_Inserts

$85.51 $138.52

MTGNR 10-3B — toolholder, 0.625" square shank, 4.5" overall length. Made in the USA by RMC Tooling. 0° Side Cutting Edge Angle for Negative Triangle TNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...

MTFNR 10-3B Tool Holder 0 End Cutting Edge Angle for Negative Triangle TNM_Inserts

$74.09 $120.02

MTFNR 10-3B — toolholder, 0.625" square shank, 4.5" overall length. Made in the USA by RMC Tooling. 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...

MTANR 12-3B Tool Holder 0 Side Cutting Edge Angle for Negative Triangle TNM_Inserts

$75.04 $121.56

MTANR 12-3B — toolholder, 0.750" square shank, 4.5" overall length. Made in the USA by RMC Tooling. 0° Side Cutting Edge Angle for Negative Triangle TNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...

MTANL 10-3B Tool Holder 0 Side Cutting Edge Angle for Negative Triangle TNM_Inserts

$62.92 $78.65

MTANL 10-3B — toolholder, 0.625" square shank, 4.5" overall length. Made in the USA by RMC Tooling. 0° Side Cutting Edge Angle for Negative Triangle TNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...

SI-MTFNL 28-3 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts

$290.38 $362.98

SI-MTFNL 28-3 — boring bar, 1.75" bar diameter, 2.030" minimum bore, 14.0" overall length. Made in the USA by RMC Tooling. 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a...

MTANR 10-3B Tool Holder 0 Side Cutting Edge Angle for Negative Triangle TNM_Inserts

$75.00 $121.50

MTANR 10-3B — toolholder, 0.625" square shank, 4.5" overall length. Made in the USA by RMC Tooling. 0° Side Cutting Edge Angle for Negative Triangle TNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...

MTANR 64-3D Tool Holder 0 Side Cutting Edge Angle for Negative Triangle TNM_Inserts

$77.44 $96.80

MTANR 64-3D — toolholder, 0.750" × 1.000" shank (width × height), 6.0" overall length. Made in the USA by RMC Tooling. 0° Side Cutting Edge Angle for Negative Triangle TNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference...

SIMTFNR 20-3 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts

$288.44 $467.28

SIMTFNR 20-3 — boring bar, 1.25" bar diameter, 1.530" minimum bore, 14.0" overall length. Made in the USA by RMC Tooling. 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a...

SIMTJNL 16-3 -3° End Cutting Edge Angle for Negative Triangle TNM_ Inserts

$259.63 $420.60

SIMTJNL 16-3 — boring bar, 1.00" bar diameter, 1.280" minimum bore, 12.0" overall length. Made in the USA by RMC Tooling. -3° End Cutting Edge Angle for Negative Triangle TNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a...

SIMTFNR 16-3 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts

$259.63 $420.60

SIMTFNR 16-3 — boring bar, 1.00" bar diameter, 1.280" minimum bore, 12.0" overall length. Made in the USA by RMC Tooling. 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a...

SIMTFNL 20-3 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts

$288.44 $467.28

SIMTFNL 20-3 — boring bar, 1.25" bar diameter, 1.530" minimum bore, 14.0" overall length. Made in the USA by RMC Tooling. 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a...

MTENN 10-3B Tool Holder 30 Degree Side Cutting Edge Angle for Negative Triangle TNM_Inserts

$75.04 $121.56

MTENN 10-3B — toolholder, 0.625" square shank, 4.5" overall length. Made in the USA by RMC Tooling. 30° Side Cutting Edge Angle for Negative Triangle TNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...

SIMTFNL 16-3 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts

$259.63 $420.60

SIMTFNL 16-3 — boring bar, 1.00" bar diameter, 1.280" minimum bore, 12.0" overall length. Made in the USA by RMC Tooling. 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a...

MTJNL 16-3D Tool Holder 3 Side Cutting Edge Angle for Negative Triangle TNM_Inserts

$86.53 $140.18

MTJNL 16-3D — toolholder, 1.000" square shank, 6.0" overall length. Made in the USA by RMC Tooling. 3°Side Cutting Edge Angle for Negative Triangle TNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool goes...

MTRNL 16-3D Tool Holder 15 DEGREE Side Cutting Edge Angle for Negative Triangle TNM_Inserts

$81.64 $132.26

MTRNL 16-3D — toolholder, 1.000" square shank, 6.0" overall length. Made in the USA by RMC Tooling. 15° Side Cutting Edge Angle for Negative Triangle TNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...

MTANL 64-3D Tool Holder 0 Side Cutting Edge Angle for Negative Triangle TNM_Inserts

$77.44 $96.80

MTANL 64-3D — toolholder, 0.750" × 1.000" shank (width × height), 6.0" overall length. Made in the USA by RMC Tooling. 0° Side Cutting Edge Angle for Negative Triangle TNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference...

MTCNN 08-3A Tool Holder 0° End Cutting Edge Angle for Negative Triangle TNM_Inserts

$52.38 $65.47

MTCNN 08-3A — toolholder, 0.50" square shank, 4.0" overall length. Made in the USA by RMC Tooling. 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...

MTENN 64-3D Tool Holder 30 Side Cutting Edge Angle for Negative Triangle TNM_Inserts

$72.58 $90.73

MTENN 64-3D — toolholder, 0.750" × 1.000" shank (width × height), 6.0" overall length. Made in the USA by RMC Tooling. 30° Side Cutting Edge Angle for Negative Triangle TNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference...

MTRNL 12-3B Tool Holder 15 DEGREE Side Cutting Edge Angle for Negative Triangle TNM_Inserts

$75.04 $121.56

MTRNL 12-3B — toolholder, 0.750" square shank, 4.5" overall length. Made in the USA by RMC Tooling. 15° Side Cutting Edge Angle for Negative Triangle TNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...

MTFNR 16-3D Tool Holder 0 End Cutting Edge Angle for Negative Triangle TNM_Inserts

$86.53 $140.18

MTFNR 16-3D — toolholder, 1.000" square shank, 6.0" overall length. Made in the USA by RMC Tooling. 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...

MTCNN 08-3B Tool Holder 0 Degree End Cutting Edge Angle for Negative Triangle TNM_Inserts

$52.38 $65.47

MTCNN 08-3B — toolholder, 0.50" square shank, 4.5" overall length. Made in the USA by RMC Tooling. 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...

MTRNL 10-3B Tool Holder 15 DEGREE Side Cutting Edge Angle for Negative Triangle TNM_Inserts

$62.92 $78.65

MTRNL 10-3B — toolholder, 0.625" square shank, 4.5" overall length. Made in the USA by RMC Tooling. 15° Side Cutting Edge Angle for Negative Triangle TNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...

MTJNR 10-3B Tool Holder 3 Side Cutting Edge Angle for Negative Triangle TNM_Inserts

$75.00 $121.50

MTJNR 10-3B — toolholder, 0.625" square shank, 4.5" overall length. Made in the USA by RMC Tooling. 3°Side Cutting Edge Angle for Negative Triangle TNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool goes...

SI-MTFNR 28-3 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts

$290.38 $362.98

SI-MTFNR 28-3 — boring bar, 1.75" bar diameter, 2.030" minimum bore, 14.0" overall length. Made in the USA by RMC Tooling. 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a...

MTGNL 10-3B Tool Holder 0 Side Cutting Edge Angle for Negative Triangle TNM_Inserts

$85.51 $138.52

MTGNL 10-3B — toolholder, 0.625" square shank, 4.5" overall length. Made in the USA by RMC Tooling. 0° Side Cutting Edge Angle for Negative Triangle TNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...

SIMTFNL 24-3 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts

$317.30 $514.02

SIMTFNL 24-3 — boring bar, 1.50" bar diameter, 1.780" minimum bore, 14.0" overall length. Made in the USA by RMC Tooling. 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a...

MTFNL 10-3B Tool Holder 0 End Cutting Edge Angle for Negative Triangle TNM_Inserts

$75.00 $121.50

MTFNL 10-3B — toolholder, 0.625" square shank, 4.5" overall length. Made in the USA by RMC Tooling. 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...

MTFNR 12-3B Tool Holder 0 End Cutting Edge Angle for Negative Triangle TNM_Inserts

$75.04 $121.56

MTFNR 12-3B — toolholder, 0.750" square shank, 4.5" overall length. Made in the USA by RMC Tooling. 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...

MTFNL 16-3D Tool Holder 0 End Cutting Edge Angle for Negative Triangle TNM_Inserts

$86.53 $140.18

MTFNL 16-3D — toolholder, 1.000" square shank, 6.0" overall length. Made in the USA by RMC Tooling. 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...

SIMTFNR 24-3 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts

$317.30 $514.02

SIMTFNR 24-3 — boring bar, 1.50" bar diameter, 1.780" minimum bore, 14.0" overall length. Made in the USA by RMC Tooling. 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a...

MTHOL 10-3B Tool Holder Gang Tool Holder for Shallow Grooving or I.D. Threading for Triangle TNMA_Inserts

$75.00 $121.50

MTHOL 10-3B — toolholder, 0.625" square shank, 4.5" overall length. Made in the USA by RMC Tooling. Gang Toolholder for Shallow Grooving or I.D. Threading for Triangle TNMA Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so...

MTHOR 12-3B Tool Holder Gang Tool Holder for Shallow Grooving or I.D. Threading for Triangle TNMA_Inserts

$75.00 $121.50

MTHOR 12-3B — toolholder, 0.750" square shank, 4.5" overall length. Made in the USA by RMC Tooling. Gang Toolholder for Shallow Grooving or I.D. Threading for Triangle TNMA Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so...

MTRNR 12-3B Tool Holder 15 DEGREE Side Cutting Edge Angle for Negative Triangle TNM_Inserts

$75.04 $121.56

MTRNR 12-3B — toolholder, 0.750" square shank, 4.5" overall length. Made in the USA by RMC Tooling. 15° Side Cutting Edge Angle for Negative Triangle TNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...

S20 MTJNR 3 Indexable Boring Bar for CNC Turning

$288.44 $467.28

S20 MTJNR 3 — boring bar, 1.25" bar diameter, 1.530" minimum bore, 14.0" overall length. Made in the USA by RMC Tooling. -3° End Cutting Edge Angle for Negative Triangle TNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and...

S20 MTUNL 3 Indexable Boring Bar for CNC Turning

$288.44 $467.28

S20 MTUNL 3 — boring bar, 1.25" bar diameter, 1.530" minimum bore, 14.0" overall length. Made in the USA by RMC Tooling. -3° End Cutting Edge Angle for Negative Triangle TNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and...

MTJNL 10-3B Tool Holder 3 Side Cutting Edge Angle for Negative Triangle TNM_Inserts

$75.00 $121.50

MTJNL 10-3B — toolholder, 0.625" square shank, 4.5" overall length. Made in the USA by RMC Tooling. 3°Side Cutting Edge Angle for Negative Triangle TNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool goes...