Search results for "TNMC 322"

SISTHOR Boring Bar

SISTHOR 12-3 Indexable Boring Bar for CNC Turning

$317.30 $514.02

SISTHOR 12-3 — boring bar, 3/4" bar diameter. Made in the USA by RMC Tooling. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a rigid clamping system sized to the bar diameter — the combination that keeps chatter down at...
STZOL Tool Holder

STZOL 12-3B Indexable Tool Holder for CNC Turning

$176.83 $286.46

STZOL 12-3B — toolholder, 0.75" square shank, 4.5" overall length. Made in the USA by RMC Tooling. Reverse Hand Threading for Threading for Triangle TNMC Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool goes...
STHOR Tool Holder

STHOR 12-3D Indexable Tool Holder for CNC Turning

$165.04 $267.36

STHOR 12-3D — toolholder, 3/4" square shank, 6.0" overall length. Made in the USA by RMC Tooling. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool goes back into the turret at the same cutting-point location...
SISTHOL Boring Bar

SISTHOL 16-3 Indexable Boring Bar for CNC Turning

$317.30 $514.02

SISTHOL 16-3 — boring bar, 1.00" bar diameter, 1.388" minimum bore, 12.0" overall length. Made in the USA by RMC Tooling. I.D. Threading & Shallow Grooving For Triangle TNMC Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a rigid...
SISTHOR Boring Bar

SISTHOR 16-3 Indexable Boring Bar for CNC Turning

$317.30 $514.02

SISTHOR 16-3 — boring bar, 1.00" bar diameter, 1.388" minimum bore, 12.0" overall length. Made in the USA by RMC Tooling. I.D. Threading & Shallow Grooving For Triangle TNMC Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a rigid...
STHOR Boring Bar

S16 STHOR 3 Indexable Boring Bar for CNC Turning

$317.30 $514.02

S16 STHOR 3 — boring bar, 1.00" bar diameter, 1.388" minimum bore, 12.0" overall length. Made in the USA by RMC Tooling. I.D. Threading & Shallow Grooving For Triangle TNMC Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a...
SISTHOR Boring Bar

SISTHOR 20-3 Indexable Boring Bar for CNC Turning

$346.17 $560.80

SISTHOR 20-3 — boring bar, 1.25" bar diameter, 1.656" minimum bore, 14.0" overall length. Made in the USA by RMC Tooling. I.D. Threading & Shallow Grooving For Triangle TNMC Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a rigid...
SISTHOL Boring Bar

SISTHOL 20-3 Indexable Boring Bar for CNC Turning

$346.17 $560.80

SISTHOL 20-3 — boring bar, 1.25" bar diameter, 1.656" minimum bore, 14.0" overall length. Made in the USA by RMC Tooling. I.D. Threading & Shallow Grooving For Triangle TNMC Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a rigid...
STHOL Boring Bar

S16 STHOL 3 Indexable Boring Bar for CNC Turning

$317.30 $514.02

S16 STHOL 3 — boring bar, 1.00" bar diameter, 1.388" minimum bore, 12.0" overall length. Made in the USA by RMC Tooling. I.D. Threading & Shallow Grooving For Triangle TNMC Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a...
STHOR Tool Holder

STHOR 12-3B Indexable Tool Holder for CNC Turning

$106.10 $171.88

STHOR 12-3B — toolholder, 0.750" square shank, 4.5" overall length. Made in the USA by RMC Tooling. Gang Toolholder for Shallow Grooving or I.D. Threading for Triangle TCMC Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so...
STHOR Tool Holder

STHOR 16-3D Indexable Tool Holder for CNC Turning

$165.04 $267.36

STHOR 16-3D — toolholder, 1" square shank, 6.0" overall length. Made in the USA by RMC Tooling. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool goes back into the turret at the same cutting-point location...
STVOL Tool Holder

STVOL 20-3D Indexable Tool Holder for CNC Turning

$112.48 $182.22

STVOL 20-3D — toolholder, 1-1/4" square shank, 6.0" overall length. Made in the USA by RMC Tooling. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool goes back into the turret at the same cutting-point location...
SIMTJNR Boring Bar

SIMTJNR 32-4 -3° End Cutting Edge Angle for Negative Triangle TNM_ Inserts

$375.00 $607.50

SIMTJNR 32-4 — boring bar, 2.00" bar diameter, 2.562" minimum bore, 16.0" overall length. Made in the USA by RMC Tooling. -3° End Cutting Edge Angle for Negative Triangle TNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a...
SIMTFNR Boring Bar

SIMTFNR 32-4 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts

$375.00 $607.50

SIMTFNR 32-4 — boring bar, 2.00" bar diameter, 2.562" minimum bore, 16.0" overall length. Made in the USA by RMC Tooling. 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a...
RMC Insert Shims

RMC Insert Shims — Models MTN-432 to TSN-533

$7.46 $9.94

Replacement shims and shim seats for indexable turning and milling tool holders are available. The shim protects the holder pocket from insert breakage—replacing a worn shim is far cheaper than replacing the holder. Covers the common negative and positive insert geometries (CNMG, DNMG, SNMG, TNMG, WNMG, VNMG, and more—match the...
SIMTJNR Boring Bar

SIMTJNR 32-5 -3° End Cutting Edge Angle for Negative Triangle TNM_ Inserts

$375.00 $607.50

SIMTJNR 32-5 — boring bar, 2" bar diameter. Made in the USA by RMC Tooling. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a rigid clamping system sized to the bar diameter — the combination that keeps chatter down at...
PTTNR20CA-22 Cartridge — Canela, FM Carbide

PTTNR20CA-22 Cartridge 60° Lead Angle TNMG 43 Insert

$201.68

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: PTTNR20CA-22 Dimension D: 2.756" Length (L): 2.756" Length (L1): 1.575" Width (b): 0.787" Dimension...
SIMTJNL Boring Bar

SIMTJNL 32-4 -3° End Cutting Edge Angle for Negative Triangle TNM_ Inserts

$375.00 $607.50

SIMTJNL 32-4 — boring bar, 2.00" bar diameter, 2.562" minimum bore, 16.0" overall length. Made in the USA by RMC Tooling. -3° End Cutting Edge Angle for Negative Triangle TNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a...
RMC Insert Shims

RMC Insert Shims — Models ISSN-632 to MTN-334

$7.46 $9.94

Replacement shims and shim seats for indexable turning and milling tool holders. The shim protects the holder pocket from insert breakage — replacing a worn shim is far cheaper than replacing the holder. Covers the common negative and positive insert geometries (CNMG, DNMG, SNMG, TNMG, WNMG, VNMG and more —...
SIMTJNR Boring Bar

SIMTJNR 40-5 -3° End Cutting Edge Angle for Negative Triangle TNM_ Inserts

$432.70 $700.98

SIMTJNR 40-5 — boring bar, 2.50" bar diameter, 3.062" minimum bore, 16.0" overall length. Made in the USA by RMC Tooling. -3° End Cutting Edge Angle for Negative Triangle TNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a...
RMC Insert Shims

RMC Insert Shims — Models TSN-534 to WSN-433

$8.69 $11.58

Replacement shims and shim seats for indexable turning and milling tool holders are available. The shim protects the holder pocket from insert breakage—replacing a worn shim is far cheaper than replacing the holder. Covers the common negative and positive insert geometries (CNMG, DNMG, SNMG, TNMG, WNMG, VNMG, and more—match the...
SIMTFNL Boring Bar

SI-MTFNL 28-3 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts

$290.38 $362.98

SI-MTFNL 28-3 — boring bar, 1.75" bar diameter, 2.030" minimum bore, 14.0" overall length. Made in the USA by RMC Tooling. 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a...
Canela TNMG332TC triangular turning insert, grade TS20

TNMG 332 Turning Insert, TC Chipbreaker, 0.031" Corner Radius, Grade TS20

$11.14

Canela reference TNMG332TC — triangular turning insert, grade TS20. Original Canela indexable insert, 0.650" cutting edge and 0.031" corner radius. Sold individually, no minimum order.Specifications Reference: TNMG332TC Insert shape: triangular (T) Clearance angle: 0° Chipbreaker: TC Cutting edge length (l): 0.650" Thickness (T): 0.187" Inscribed circle (d): 0.375" Corner radius...
SIMTJNL Boring Bar

SI-MTJNL 32-5 -3° End Cutting Edge Angle for Negative Triangle TNM_ Inserts

$314.57 $393.21

SI-MTJNL 32-5 — boring bar, 2" bar diameter. Made in the USA by RMC Tooling. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a rigid clamping system sized to the bar diameter — the combination that keeps chatter down at...
SIMTJNL Boring Bar

SIMTJNL 40-5 -3° End Cutting Edge Angle for Negative Triangle TNM_ Inserts

$432.70 $700.98

SIMTJNL 40-5 — boring bar, 2.50" bar diameter, 3.062" minimum bore, 16.0" overall length. Made in the USA by RMC Tooling. -3° End Cutting Edge Angle for Negative Triangle TNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a...