Search results for "VN 33"

MVVNN203D Tool Holder VN 33 Insert

$136.80

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MVVNN123B Tool Holder VN 33 Insert

$121.08

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

DVJNL123BAN Tool Holder 93° Lead Angle VN 33 Insert

$192.93

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

DVJNL203DAN Tool Holder 93° Lead Angle VN 33 Insert

$217.78

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MVJNR123B Tool Holder 93° Lead Angle VN 33 Insert

$121.08

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

S24U-MVUNR3 Boring Bar 93° Lead Angle VN 33 Insert

$339.48

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...

MVVNN243E Tool Holder VN 33 Insert

$175.20

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MVVNN163D Tool Holder VN 33 Insert

$123.17

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

DVJNL163DAN Tool Holder 93° Lead Angle VN 33 Insert

$196.57

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

DVJNL243EAN Tool Holder 93° Lead Angle VN 33 Insert

$232.95

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MVJNL203D Tool Holder 93° Lead Angle VN 33 Insert

$136.80

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

DVJNR123BAN Tool Holder 93° Lead Angle VN 33 Insert

$192.93

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

S16T-MVUNR3 Boring Bar 93° Lead Angle VN 33 Insert

$279.79

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...

DVJNR163DAN Tool Holder 93° Lead Angle VN 33 Insert

$196.57

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MVJNL123B Tool Holder 93° Lead Angle VN 33 Insert

$121.08

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

DVJNR243EAN Tool Holder 93° Lead Angle VN 33 Insert

$232.95

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MVJNL163D Tool Holder 93° Lead Angle VN 33 Insert

$123.17

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MVJNR163D Tool Holder 93° Lead Angle VN 33 Insert

$123.17

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

S24U-MVUNL3 Boring Bar 93° Lead Angle VN 33 Insert

$339.48

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...

S20U-MVUNR3 Boring Bar 93° Lead Angle VN 33 Insert

$310.30

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...

S16T-MVUNL3 Boring Bar 93° Lead Angle VN 33 Insert

$279.79

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...

MVJNR203D Tool Holder 93° Lead Angle VN 33 Insert

$136.80

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

S20U-MVUNL3 Boring Bar 93° Lead Angle VN 33 Insert

$310.30

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...

DVJNR203DAN Tool Holder 93° Lead Angle VN 33 Insert

$217.78

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

A24U-MVUN R 3 - 93° Side & End Cutting Edge Angle

$373.78

Right Hand Boring Bar A24U-MVUN 3 - 93° Side & End Cutting Edge Angle - OAL = 14" Cutting Length = 3" Internal turning and profiling boring bar equipped with rhombic negative double-sided insert (angle 35º). Specifications Model: A24U-MVUNR3 Bar diameter (D): 1.500" Minimum bore (A): 2.500" Overall length (L1):...

A20U-MVUN L 3 - 93° Side & End Cutting Edge Angle

$341.11

Left Hand Boring Bar A20U-MVUN 3 - 93° Side & End Cutting Edge Angle - OAL = 14" Cutting Length = 3" Internal turning and profiling boring bar equipped with rhombic negative double-sided insert (angle 35º) Specifications Model: A20U-MVUNL3 Bar diameter (D): 1.250" Minimum bore (A): 2.250" Overall length (L1):...

A24U-MVUN L 3 - 93° Side & End Cutting Edge Angle

$373.78

Left Hand Boring Bar A24U-MVUN 3 - 93° Side & End Cutting Edge Angle - OAL = 14" Cutting Length = 3" Internal turning and profiling boring bar equipped with rhombic negative double-sided insert (angle 35º) Specifications Model: A24U-MVUNL3 Bar diameter (D): 1.500" Minimum bore (A): 2.500" Overall length (L1):...

A16T-MVUN L 3 - 93° Side & End Cutting Edge Angle

$307.90

Left Hand Boring Bar A16T-MVUN 3 - 93° Side & End Cutting Edge Angle - OAL = 12" Cutting Length = 2.5" Internal turning and profiling boring bar equipped with rhombic negative double-sided insert (angle 35º) Specifications Model: A16T-MVUNL3 Bar diameter (D): 1.000" Minimum bore (A): 2.000" Overall length (L1):...

A20U-MVUN R 3 - 93° Side & End Cutting Edge Angle

$341.11

Right Hand Boring Bar A20U-MVUN 3 - 93° Side & End Cutting Edge Angle - OAL = 14" Cutting Length = 3" Internal turning and profiling boring bar equipped with rhombic negative double-sided insert (angle 35º). Specifications Model: A20U-MVUNR3 Bar diameter (D): 1.250" Minimum bore (A): 2.250" Overall length (L1):...

A16T-MVUN R 3 - 93° Side & End Cutting Edge Angle

$307.90

Right Hand Boring Bar A16T-MVUN 3 - 93° Side & End Cutting Edge Angle - OAL = 12" Cutting Length = 2.5" Internal turning and profiling boring bar equipped with rhombic negative double-sided insert (angle 35º). Specifications Model: A16T-MVUNR3 Bar diameter (D): 1.000" Minimum bore (A): 2.000" Overall length (L1):...

S32V-MVUNR4 Boring Bar 93° Lead Angle VN 43 Insert

$382.14

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...

S32V-MVUNL4 Boring Bar 93° Lead Angle VN 43 Insert

$382.14

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...

S40V-MVUNR4 Boring Bar 93° Lead Angle VN 43 Insert

$442.99

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...

S40V-MVUNL4 Boring Bar 93° Lead Angle VN 43 Insert

$442.99

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...

MVVNN244E Tool Holder VN 43 Insert

$175.20

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MVVNN204D Tool Holder VN 43 Insert

$136.80

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MVVNN164D Tool Holder VN 43 Insert

$123.17

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...