Search results

PROON 16-4D Tool Holder Neutral Shank for Profiling RCMM Inserts

$86.53 each

PROON 16-4D — toolholder. Made in the USA by RMC Tooling. Neutral Shank for Profiling RCMM Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool goes back into the turret at the same cutting-point location...

PROON 85-4D Tool Holder Neutral Shank for Profiling RCMM Inserts

$92.32 each

PROON 85-4D — toolholder. Made in the USA by RMC Tooling. Neutral Shank for Profiling RCMM Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool goes back into the turret at the same cutting-point location...

PROON 20-4E Tool Holder Neutral Shank for Profiling RCMM Inserts

$95.20 each

PROON 20-4E — toolholder. Made in the USA by RMC Tooling. Neutral Shank for Profiling RCMM Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool goes back into the turret at the same cutting-point location...

PROON 24-8E Tool Holder Neutral Shank for Profiling RCMM Inserts

$109.60 each

PROON 24-8E — toolholder. Made in the USA by RMC Tooling. Neutral Shank for Profiling RCMM Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool goes back into the turret at the same cutting-point location...

PROON 20-8E Tool Holder Neutral Shank for Profiling RCMM Inserts

$95.20 each

PROON 20-8E — toolholder. Made in the USA by RMC Tooling. Neutral Shank for Profiling RCMM Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool goes back into the turret at the same cutting-point location...

PROON 20-6E Tool Holder Neutral Shank for Profiling RCMM Inserts

$95.20 each

PROON 20-6E — toolholder. Made in the USA by RMC Tooling. Neutral Shank for Profiling RCMM Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool goes back into the turret at the same cutting-point location...

PROON 24-6E Tool Holder Neutral Shank for Profiling RCMM Inserts

$109.60 each

PROON 24-6E — toolholder. Made in the USA by RMC Tooling. Neutral Shank for Profiling RCMM Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool goes back into the turret at the same cutting-point location...

RMC Insert Shims — Models MTN-432 to TSN-533

$7.46 each

Replacement shims and shim seats for indexable turning and milling tool holders are available. The shim protects the holder pocket from insert breakage—replacing a worn shim is far cheaper than replacing the holder. Covers the common negative and positive insert geometries (CNMG, DNMG, SNMG, TNMG, WNMG, VNMG, and more—match the...

S40V-WTFNR4 Boring Bar 90° Lead Angle TNM 43 Insert

$402.89 each

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...

PROON 85-4E Indexable Turning Tool Holder, 1" Square Shank, 1/2" I.C. Round Insert, Neutral

$92.32 each

PROON 85-4E — toolholder, 1" × 1-1/4" rectangular shank, 7.0" overall length. Made in the USA by RMC Tooling. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool goes back into the turret at the same...

SIMWLNL 40-4 Indexable Boring Bar for CNC Turning

$432.90 each

SIMWLNL 40-4 — boring bar, 2.50" bar diameter, 3.062" minimum bore, 16.0" overall length. Made in the USA by RMC Tooling. -5° End & Side Cutting Edge Angle for Negative Trigon WNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry,...

S40V-MTFNL4 Boring Bar 90° Lead Angle TNM 43 Insert

$402.89 each

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...

MDJNL20CA-4C Cartridge 93° Lead Angle DN 43 Insert

$169.47 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MDJNL20CA-4C Dimension D: 2.756" Length (L): 2.756" Length (L1): 1.575" Width (b): 0.787" Dimension...

S32V-WTFNL4 Boring Bar 90° Lead Angle TNM 43 Insert

$336.39 each

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...

SIMTJNR 40-4 Indexable Boring Bar for CNC Turning

$432.70 each

SIMTJNR 40-4 — boring bar, 2.50" bar diameter, 3.062" minimum bore, 16.0" overall length. Made in the USA by RMC Tooling. -3° End Cutting Edge Angle for Negative Triangle TNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a...

PROON 24-4E Indexable Turning Tool Holder, 1-1/2" Square Shank, 1/2" I.C. Round Insert, Neutral

$113.77 each

PROON 24-4E — toolholder, 1-1/2" square shank, 7.0" overall length. Made in the USA by RMC Tooling. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool goes back into the turret at the same cutting-point location...

SIMTJNL 40-5 -3° End Cutting Edge Angle for Negative Triangle TNM_ Inserts

$432.70 each

SIMTJNL 40-5 — boring bar, 2.50" bar diameter, 3.062" minimum bore, 16.0" overall length. Made in the USA by RMC Tooling. -3° End Cutting Edge Angle for Negative Triangle TNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a...

SIMVJNR 40-3 Indexable Boring Bar for CNC Turning

$461.36 each

SIMVJNR 40-3 — boring bar, 2-1/2" bar diameter. Made in the USA by RMC Tooling. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a rigid clamping system sized to the bar diameter — the combination that keeps chatter down at...

S40 MTUNR 5 Indexable Boring Bar for CNC Turning

$432.70 each

S40 MTUNR 5 — boring bar, 2.50" bar diameter, 3.062" minimum bore, 16.0" overall length. Made in the USA by RMC Tooling. -3° End Cutting Edge Angle for Negative Triangle TNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and...

H40 DCLNL 6 Interchangeable Head for CNC Turning

$490.38 each

H40 DCLNL 6 — interchangeable head, 2.500" head diameter, 3.030" minimum bore. Made in the USA by RMC Tooling. H-DCLNR/L Heads. Interchangeable boring head from RMC Tooling, machined in the United States. The head mounts on a matching RMC bar, so one bar covers a whole family of geometries and...

SIMVJNL 40-4 -3° Side Cutting Edge Angle for Negative 35° Diamond VNM_ Inserts

$461.54 each

SIMVJNL 40-4 — boring bar, 2.50" bar diameter, 3.750" minimum bore, 16.0" overall length. Made in the USA by RMC Tooling. -3° Side Cutting Edge Angle for Negative 35° Diamond VNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and...

S40V-MTFNR4 Boring Bar 90° Lead Angle TNM 43 Insert

$402.89 each

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...

SICTFPR 40-4 Indexable Boring Bar for CNC Turning

$568.01 each

SICTFPR 40-4 — boring bar, 2.500" bar diameter, 3.062" minimum bore, 16.0" overall length. Made in the USA by RMC Tooling. -5° End Cutting Edge Angle for Positive Triangle TPG Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a...

SIMDJNL 40-4 Indexable Boring Bar for CNC Turning

$495.06 each

SIMDJNL 40-4 — boring bar, 2-1/2" bar diameter. Made in the USA by RMC Tooling. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a rigid clamping system sized to the bar diameter — the combination that keeps chatter down at...

SIMVJNR 40-4 -3° Side Cutting Edge Angle for Negative 35° Diamond VNM_ Inserts

$461.54 each

SIMVJNR 40-4 — boring bar, 2.50" bar diameter, 3.750" minimum bore, 16.0" overall length. Made in the USA by RMC Tooling. -3° Side Cutting Edge Angle for Negative 35° Diamond VNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and...

SIMTJNR 40-5 -3° End Cutting Edge Angle for Negative Triangle TNM_ Inserts

$432.70 each

SIMTJNR 40-5 — boring bar, 2.50" bar diameter, 3.062" minimum bore, 16.0" overall length. Made in the USA by RMC Tooling. -3° End Cutting Edge Angle for Negative Triangle TNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a...

MTUNL20CA-4C Cartridge 93° Lead Angle TNMG 43 Insert

$169.47 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MTUNL20CA-4C Dimension D: 2.756" Length (L): 2.756" Length (L1): 1.575" Width (b): 0.787" Dimension...

RMC Insert Shims — Models TSN-534 to WSN-433

$8.69 each

Replacement shims and shim seats for indexable turning and milling tool holders are available. The shim protects the holder pocket from insert breakage—replacing a worn shim is far cheaper than replacing the holder. Covers the common negative and positive insert geometries (CNMG, DNMG, SNMG, TNMG, WNMG, VNMG, and more—match the...

PROON 20-4D Indexable Turning Tool Holder, 1-1/4" Square Shank, 1/2" I.C. Round Insert, Neutral

$95.20 each

PROON 20-4D — toolholder, 1-1/4" square shank, 6.0" overall length. Made in the USA by RMC Tooling. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool goes back into the turret at the same cutting-point location...

RNMG 43 Turning Insert, 0.500" Diameter, Grade TN20

$9.13 per insert$91.30 per box of 10

Canela reference RNMG43 — round turning insert, grade TN20. Original Canela indexable insert, 0.500" diameter. Specifications Reference: RNMG43 Insert shape: round (R) Clearance angle: 0° Thickness (T): 0.187" Diameter (d): 0.500" Grade: TN20 Brand: Canela Dimensions in inches, as published in the Canela turning inserts catalog, page A31. Dimension letters...

SIMCLNL 40-4 Indexable Boring Bar for CNC Turning

$432.70 each

SIMCLNL 40-4 — boring bar, 2-1/2" bar diameter. Made in the USA by RMC Tooling. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a rigid clamping system sized to the bar diameter — the combination that keeps chatter down at...

S24U-MTUNL4 Boring Bar 93° Lead Angle TNM 43 Insert

$285.91 each

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...

MRGNL854D Tool Holder RNMG 43 Insert

$103.97 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

SIMDJNR 40-4 Indexable Boring Bar for CNC Turning

$461.36 each

SIMDJNR 40-4 — boring bar, 2-1/2" bar diameter. Made in the USA by RMC Tooling. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a rigid clamping system sized to the bar diameter — the combination that keeps chatter down at...

SIMTHOR 40-5 Indexable Boring Bar for CNC Turning

$461.54 each

SIMTHOR 40-5 — boring bar, 2.50" bar diameter, 3.750" minimum bore, 16.0" overall length. Made in the USA by RMC Tooling. I.D. Threading & Shallow Grooving for Triangle TNMA Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a rigid...

SISTHOR 40-4 Indexable Boring Bar for CNC Turning

$461.54 each

SISTHOR 40-4 — boring bar, 2-1/2" bar diameter. Made in the USA by RMC Tooling. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a rigid clamping system sized to the bar diameter — the combination that keeps chatter down at...

SCFCL12CA-12 Cartridge 90° Lead Angle CC 43 Insert

$184.03 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: SCFCL12CA-12 Dimension D: 1.575" Length (L): 1.850" Length (L1): 0.984" Width (b): 0.551" Dimension...

MSSNR124B Tool Holder 45° Lead Angle SNM 43 Insert

$74.32 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MTCNN124B Tool Holder 90° Lead Angle TNM 43 Insert

$96.70 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

SIMDUNL 40-5 Indexable Boring Bar for CNC Turning

$461.54 each

SIMDUNL 40-5 — boring bar, 2.50" bar diameter, 3.500" minimum bore, 16.0" overall length. Made in the USA by RMC Tooling. -3° End Cutting Edge Angle for Negative 55° Diamond DNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and...

SIMTFNL 40-4 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts

$432.70 each

SIMTFNL 40-4 — boring bar, 2.50" bar diameter, 3.062" minimum bore, 16.0" overall length. Made in the USA by RMC Tooling. 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a...

S40V-CTFPR4 Boring Bar 90° Lead Angle TP 43 Insert

$402.89 each

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...

SIMDUNL 40-4 Indexable Boring Bar for CNC Turning

$495.06 each

SIMDUNL 40-4 — boring bar, 2-1/2" bar diameter. Made in the USA by RMC Tooling. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a rigid clamping system sized to the bar diameter — the combination that keeps chatter down at...

S40V-WTFNL4 Boring Bar 90° Lead Angle TNM 43 Insert

$402.89 each

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...

SIMTFNR 40-5 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts

$432.70 each

SIMTFNR 40-5 — boring bar, 2.50" bar diameter, 3.062" minimum bore, 16.0" overall length. Made in the USA by RMC Tooling. 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a...

SIMCLNR 40-5 Indexable Boring Bar for CNC Turning

$432.70 each

SIMCLNR 40-5 — boring bar, 2.50" bar diameter, 3.062" minimum bore, 16.0" overall length. Made in the USA by RMC Tooling. -5° Side & End Cutting Edge Angle for Negative 80° Diamond CNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable...

MSRNR12CA-4C Cartridge 75° Lead Angle SNMG 43 Insert

$154.92 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSRNR12CA-4C Dimension D: 1.969" Length (L): 2.165" Length (L1): 1.378" Width (b): 0.630" Dimension...

MSRNL12CA-4C Cartridge 75° Lead Angle SNMG 43 Insert

$154.92 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSRNL12CA-4C Dimension D: 1.969" Length (L): 2.165" Length (L1): 1.378" Width (b): 0.630" Dimension...

A32V-MTFNL4 Boring Bar 90° Lead Angle TNM 43 Insert

$386.79 each

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...

H40 MTHOR 5W Interchangeable Head for CNC Turning

$490.38 each

H40 MTHOR 5W — interchangeable head, 2.500" head diameter, 3.375" minimum bore. Made in the USA by RMC Tooling. H-MTHOR/L Heads. Interchangeable boring head from RMC Tooling, machined in the United States. The head mounts on a matching RMC bar, so one bar covers a whole family of geometries and...