FM CARBIDE · TOOL FINDER

Search results

67 results

Canela RNMG32 round turning insert, grade TN20

RNMG 32 Turning Insert, 0.375" Diameter, Grade TN20

$8.81 each

10 inserts per box

Canela reference RNMG32 — round turning insert, grade TN20. Original Canela indexable insert, 0.375" diameter. Sold individually, no minimum order.Specifications Reference: RNMG32 Insert shape: round (R) Clearance angle: 0° Thickness (T): 0.125" Diameter (d): 0.375" Grade: TN20 Brand: Canela Dimensions in inches, as published in the Canela turning inserts catalog,...
MRGNR864D Tool Holder — Canela, FM Carbide

MRGNR123B Tool Holder RNMG 32 Insert

$74.32 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
MRGNR864D Tool Holder — Canela, FM Carbide

MRGNL123B Tool Holder RNMG 32 Insert

$74.32 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
SIMTJNR Boring Bar

SIMTJNR 32-4 -3° End Cutting Edge Angle for Negative Triangle TNM_ Inserts

$375.00 each

SIMTJNR 32-4 — boring bar, 2.00" bar diameter, 2.562" minimum bore, 16.0" overall length. Made in the USA by RMC Tooling. -3° End Cutting Edge Angle for Negative Triangle TNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a...
SIMTFNR Boring Bar

SIMTFNR 32-4 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts

$375.00 each

SIMTFNR 32-4 — boring bar, 2.00" bar diameter, 2.562" minimum bore, 16.0" overall length. Made in the USA by RMC Tooling. 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a...
SIMTJNL Boring Bar

SIMTJNL 32-4 -3° End Cutting Edge Angle for Negative Triangle TNM_ Inserts

$375.00 each

SIMTJNL 32-4 — boring bar, 2.00" bar diameter, 2.562" minimum bore, 16.0" overall length. Made in the USA by RMC Tooling. -3° End Cutting Edge Angle for Negative Triangle TNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a...
SIMTFNL Boring Bar

SIMTFNL 32-4 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts

$375.00 each

SIMTFNL 32-4 — boring bar, 2.00" bar diameter, 2.562" minimum bore, 16.0" overall length. Made in the USA by RMC Tooling. 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a...
SIMVJNR Boring Bar

SIMVJNR 32-4 -3° Side Cutting Edge Angle for Negative 35° Diamond VNM_ Inserts

$403.86 each

SIMVJNR 32-4 — boring bar, 2.00" bar diameter, 3.250" minimum bore, 16.0" overall length. Made in the USA by RMC Tooling. -3° Side Cutting Edge Angle for Negative 35° Diamond VNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and...
SIMTJNR Boring Bar

SIMTJNR 32-5 -3° End Cutting Edge Angle for Negative Triangle TNM_ Inserts

$375.00 each

SIMTJNR 32-5 — boring bar, 2" bar diameter. Made in the USA by RMC Tooling. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a rigid clamping system sized to the bar diameter — the combination that keeps chatter down at...
Canela RNMG86 round turning insert, grade TN30

RNMG 86 Turning Insert, 1.000" Diameter, Grade TN30

$40.07 each

10 inserts per box

Canela reference RNMG86 — round turning insert, grade TN30. Original Canela indexable insert, 1.000" diameter. Sold individually, no minimum order.Specifications Reference: RNMG86 Insert shape: round (R) Clearance angle: 0° Thickness (T): 0.375" Diameter (d): 1.000" Grade: TN30 Brand: Canela Dimensions in inches, as published in the Canela turning inserts catalog,...
SIMSKNR Boring Bar

SIMSKNR 32-5 15° End Cutting Edge Angle for Negative Square SNM_ Inserts

$375.00 each

SIMSKNR 32-5 — boring bar, 2.00" bar diameter, 2.562" minimum bore, 16.0" overall length. Made in the USA by RMC Tooling. 15° End Cutting Edge Angle for Negative Square SNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a...
SIMSKNR Boring Bar

SIMSKNR 32-6 15° End Cutting Edge Angle for Negative Square SNM_ Inserts

$432.70 each

SIMSKNR 32-6 — boring bar, 2.00" bar diameter, 2.400" minimum bore, 16.0" overall length. Made in the USA by RMC Tooling. 15° End Cutting Edge Angle for Negative Square SNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a...
SIMVJNL Boring Bar

SIMVJNL 32-4 -3° Side Cutting Edge Angle for Negative 35° Diamond VNM_ Inserts

$403.86 each

SIMVJNL 32-4 — boring bar, 2.00" bar diameter, 3.250" minimum bore, 16.0" overall length. Made in the USA by RMC Tooling. -3° Side Cutting Edge Angle for Negative 35° Diamond VNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and...
SIMSKNL Boring Bar

SIMSKNL 32-6 15° End Cutting Edge Angle for Negative Square SNM_ Inserts

$432.70 each

SIMSKNL 32-6 — boring bar, 2.00" bar diameter, 2.400" minimum bore, 16.0" overall length. Made in the USA by RMC Tooling. 15° End Cutting Edge Angle for Negative Square SNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a...
MRGNR864D Tool Holder — Canela, FM Carbide

MRGNL206D Tool Holder RNMG 64 Insert

$103.97 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
MRGNR864D Tool Holder — Canela, FM Carbide

MRGNR206D Tool Holder RNMG 64 Insert

$103.97 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
MRGNR864D Tool Holder — Canela, FM Carbide

MRGNR246E Tool Holder RNMG 64 Insert

$118.45 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
MRGNR864D Tool Holder — Canela, FM Carbide

MRGNL246E Tool Holder RNMG 64 Insert

$118.45 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
SIMTJNL Boring Bar

SI-MTJNL 32-5 -3° End Cutting Edge Angle for Negative Triangle TNM_ Inserts

$314.57 each

SI-MTJNL 32-5 — boring bar, 2" bar diameter. Made in the USA by RMC Tooling. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a rigid clamping system sized to the bar diameter — the combination that keeps chatter down at...
SIMSKNL Boring Bar

SIMSKNL 32-5 15° End Cutting Edge Angle for Negative Square SNM_ Inserts

$375.00 each

SIMSKNL 32-5 — boring bar, 2.00" bar diameter, 2.562" minimum bore, 16.0" overall length. Made in the USA by RMC Tooling. 15° End Cutting Edge Angle for Negative Square SNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a...
MRGNR864D Tool Holder — Canela, FM Carbide

MRGNR166D Tool Holder RNMG 64 Insert

$94.61 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
MRGNR864D Tool Holder — Canela, FM Carbide

MRGNL166D Tool Holder RNMG 64 Insert

$94.61 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
MRGNR864D Tool Holder — Canela, FM Carbide

MRGNL248E Tool Holder RNMG 86 Insert

$128.90 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
MRGNR864D Tool Holder — Canela, FM Carbide

MRGNR248E Tool Holder RNMG 86 Insert

$128.90 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
SIMTFNR Boring Bar

SIMTFNR 32-5 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts

$375.00 each

SIMTFNR 32-5 — boring bar, 2" bar diameter. Made in the USA by RMC Tooling. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a rigid clamping system sized to the bar diameter — the combination that keeps chatter down at...
MRGNR864D Tool Holder — Canela, FM Carbide

MRGNL864D Tool Holder RNMG 43 Insert

$128.90 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
SIMTFNL Boring Bar

SI-MTFNL 32-5 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts

$314.57 each

SI-MTFNL 32-5 — boring bar, 2" bar diameter. Made in the USA by RMC Tooling. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a rigid clamping system sized to the bar diameter — the combination that keeps chatter down at...
MRGNR864D Tool Holder — Canela, FM Carbide

MRGNR124B Tool Holder RNMG 43 Insert

$74.32 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
MRGNR864D Tool Holder — Canela, FM Carbide

MRGNR864D Tool Holder RNMG 43 Insert

$128.90 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
MRGNR864D Tool Holder — Canela, FM Carbide

MRGNR205D Tool Holder RNMG 54 Insert

$103.97 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
Canela RNMG43 round turning insert, grade TN20

RNMG 43 Turning Insert, 0.500" Diameter, Grade TN20

$9.13 each

10 inserts per box

Canela reference RNMG43 — round turning insert, grade TN20. Original Canela indexable insert, 0.500" diameter. Sold individually, no minimum order.Specifications Reference: RNMG43 Insert shape: round (R) Clearance angle: 0° Thickness (T): 0.187" Diameter (d): 0.500" Grade: TN20 Brand: Canela Dimensions in inches, as published in the Canela turning inserts catalog,...
MRGNR864D Tool Holder — Canela, FM Carbide

MRGNR204D Tool Holder RNMG 43 Insert

$86.86 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
MRGNR864D Tool Holder — Canela, FM Carbide

MRGNL124B Tool Holder RNMG 43 Insert

$74.32 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
MRGNR864D Tool Holder — Canela, FM Carbide

MRGNL164D Tool Holder RNMG 43 Insert

$79.05 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
MRGNR864D Tool Holder — Canela, FM Carbide

MRGNR164D Tool Holder RNMG 43 Insert

$79.05 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
MRGNR864D Tool Holder — Canela, FM Carbide

MRGNL165D Tool Holder RNMG 54 Insert

$94.61 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
MRGNR864D Tool Holder — Canela, FM Carbide

MRGNR165D Tool Holder RNMG 54 Insert

$94.61 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
MRGNR864D Tool Holder — Canela, FM Carbide

MRGNL854D Tool Holder RNMG 43 Insert

$103.97 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...