Search results for "tnmc 643"

STVOL 20-64D Tool Holder O.D. Threading & Shallow Grooving for Triangle TNMC Inserts

$128.26 $160.33

STVOL 20-64D — toolholder, 1.250" square shank, 6.0" overall length. Made in the USA by RMC Tooling. O.D. Threading & Shallow Grooving for Triangle TNMC Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool goes...

STVOR 20-64D Tool Holder O.D. Threading & Shallow Grooving for Triangle TNMC Inserts

$128.26 $160.33

STVOR 20-64D — toolholder, 1.250" square shank, 6.0" overall length. Made in the USA by RMC Tooling. O.D. Threading & Shallow Grooving for Triangle TNMC Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool goes...

MTCNN 64-4F Tool Holder 0 Degree End Cutting Edge Angle for Negative Triangle TNM_Inserts

$326.57 $408.21

MTCNN 64-4F — toolholder, 0.75" × 1.00" shank (width × height), 8.0" overall length. Made in the USA by RMC Tooling. 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference...

MTCNN 64-4D Tool Holder 0 Degree End Cutting Edge Angle for Negative Triangle TNM_Inserts

$111.16 $180.08

MTCNN 64-4D — toolholder, 0.75" × 1.00" shank (width × height), 6.0" overall length. Made in the USA by RMC Tooling. 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference...

STVOL 12-4B Tool Holder O.D. Threading & Shallow Grooving for Triangle TNMC Inserts

$86.53 $140.18

STVOL 12-4B — toolholder, 0.750" square shank, 4.5" overall length. Made in the USA by RMC Tooling. O.D. Threading & Shallow Grooving for Triangle TNMC Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool goes...

STVOL 24-4E Tool Holder O.D. Threading & Shallow Grooving for Triangle TNMC Inserts

$125.02 $156.27

STVOL 24-4E — toolholder, 1.500" square shank, 7.0" overall length. Made in the USA by RMC Tooling. O.D. Threading & Shallow Grooving for Triangle TNMC Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool goes...

MTANR 64-3D Tool Holder 0 Side Cutting Edge Angle for Negative Triangle TNM_Inserts

$77.44 $96.80

MTANR 64-3D — toolholder, 0.750" × 1.000" shank (width × height), 6.0" overall length. Made in the USA by RMC Tooling. 0° Side Cutting Edge Angle for Negative Triangle TNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference...

RMC Insert Shims — Models MTN-432 to TSN-533

$7.46 $9.94

Replacement shims and shim seats for indexable turning and milling tool holders are available. The shim protects the holder pocket from insert breakage—replacing a worn shim is far cheaper than replacing the holder. Covers the common negative and positive insert geometries (CNMG, DNMG, SNMG, TNMG, WNMG, VNMG, and more—match the...

MTANL 64-3D Tool Holder 0 Side Cutting Edge Angle for Negative Triangle TNM_Inserts

$77.44 $96.80

MTANL 64-3D — toolholder, 0.750" × 1.000" shank (width × height), 6.0" overall length. Made in the USA by RMC Tooling. 0° Side Cutting Edge Angle for Negative Triangle TNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference...

MTCNN 66-4F Tool Holder 0 Degree End Cutting Edge Angle for Negative Triangle TNM_Inserts

$326.57 $408.21

MTCNN 66-4F — toolholder, 3/4" × 1-1/2" rectangular shank, 8.0" overall length. Made in the USA by RMC Tooling. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool goes back into the turret at the same...

MTJNR 24-6E Tool Holder 3 Side Cutting Edge Angle for Negative Triangle TNM_Inserts

$109.60 $177.56

MTJNR 24-6E — toolholder, 1.500" square shank, 7.0" overall length. Made in the USA by RMC Tooling. 3°Side Cutting Edge Angle for Negative Triangle TNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool goes...

MTCNN 66-4E Tool Holder 0 Degree End Cutting Edge Angle for Negative Triangle TNM_Inserts

$173.13 $216.41

MTCNN 66-4E — toolholder, 0.75" × 1.50" shank (width × height), 7.0" overall length. Made in the USA by RMC Tooling. 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference...

SIMTJNL 24-4 -3° End Cutting Edge Angle for Negative Triangle TNM_ Inserts

$317.30 $514.02

SIMTJNL 24-4 — boring bar, 1.50" bar diameter, 2.060" minimum bore, 14.0" overall length. Made in the USA by RMC Tooling. -3° End Cutting Edge Angle for Negative Triangle TNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a...

SIMTJNR 32-4 -3° End Cutting Edge Angle for Negative Triangle TNM_ Inserts

$375.00 $607.50

SIMTJNR 32-4 — boring bar, 2.00" bar diameter, 2.562" minimum bore, 16.0" overall length. Made in the USA by RMC Tooling. -3° End Cutting Edge Angle for Negative Triangle TNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a...

SIMTJNR 16-3 -3° End Cutting Edge Angle for Negative Triangle TNM_ Inserts

$259.63 $420.60

SIMTJNR 16-3 — boring bar, 1.00" bar diameter, 1.280" minimum bore, 12.0" overall length. Made in the USA by RMC Tooling. -3° End Cutting Edge Angle for Negative Triangle TNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a...

MTJNL 16-4D Tool Holder 3 Side Cutting Edge Angle for Negative Triangle TNM_Inserts

$86.53 $140.18

MTJNL 16-4D — toolholder, 1.000" square shank, 6.0" overall length. Made in the USA by RMC Tooling. 3°Side Cutting Edge Angle for Negative Triangle TNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool goes...

MTJNR 16-3D Tool Holder 3 Side Cutting Edge Angle for Negative Triangle TNM_Inserts

$86.53 $140.18

MTJNR 16-3D — toolholder, 1.000" square shank, 6.0" overall length. Made in the USA by RMC Tooling. 3°Side Cutting Edge Angle for Negative Triangle TNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool goes...

MTCNN 44-3D Tool Holder 0 Degree End Cutting Edge Angle for Negative Triangle TNM_Inserts

$124.70 $155.87

MTCNN 44-3D — toolholder, 0.50" × 1.00" shank (width × height), 6.0" overall length. Made in the USA by RMC Tooling. 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference...

SIMTJNR 28-4 -3° End Cutting Edge Angle for Negative Triangle TNM_ Inserts

$346.17 $560.80

SIMTJNR 28-4 — boring bar, 1.75" bar diameter, 2.312" minimum bore, 14.0" overall length. Made in the USA by RMC Tooling. -3° End Cutting Edge Angle for Negative Triangle TNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a...

SIMTJNR 24-4 -3° End Cutting Edge Angle for Negative Triangle TNM_ Inserts

$317.30 $514.02

SIMTJNR 24-4 — boring bar, 1.50" bar diameter, 2.060" minimum bore, 14.0" overall length. Made in the USA by RMC Tooling. -3° End Cutting Edge Angle for Negative Triangle TNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a...

SIMTJNR 32-5 -3° End Cutting Edge Angle for Negative Triangle TNM_ Inserts

$375.00 $607.50

SIMTJNR 32-5 — boring bar, 2" bar diameter. Made in the USA by RMC Tooling. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a rigid clamping system sized to the bar diameter — the combination that keeps chatter down at...

RMC Insert Shims — Models ISSN-632 to MTN-334

$7.46 $9.94

Replacement shims and shim seats for indexable turning and milling tool holders. The shim protects the holder pocket from insert breakage — replacing a worn shim is far cheaper than replacing the holder. Covers the common negative and positive insert geometries (CNMG, DNMG, SNMG, TNMG, WNMG, VNMG and more —...

SIMTJNL 32-4 -3° End Cutting Edge Angle for Negative Triangle TNM_ Inserts

$375.00 $607.50

SIMTJNL 32-4 — boring bar, 2.00" bar diameter, 2.562" minimum bore, 16.0" overall length. Made in the USA by RMC Tooling. -3° End Cutting Edge Angle for Negative Triangle TNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a...

MTCNN 44-3F Tool Holder 0 Degree End Cutting Edge Angle for Negative Triangle TNM_Inserts

$247.19 $308.99

MTCNN 44-3F — toolholder, 0.50" × 1.00" shank (width × height), 8.0" overall length. Made in the USA by RMC Tooling. 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference...

SIMTJNR 40-5 -3° End Cutting Edge Angle for Negative Triangle TNM_ Inserts

$432.70 $700.98

SIMTJNR 40-5 — boring bar, 2.50" bar diameter, 3.062" minimum bore, 16.0" overall length. Made in the USA by RMC Tooling. -3° End Cutting Edge Angle for Negative Triangle TNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a...

SIMTJNL 16-3 -3° End Cutting Edge Angle for Negative Triangle TNM_ Inserts

$259.63 $420.60

SIMTJNL 16-3 — boring bar, 1.00" bar diameter, 1.280" minimum bore, 12.0" overall length. Made in the USA by RMC Tooling. -3° End Cutting Edge Angle for Negative Triangle TNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a...

SIMTJNL 40-5 -3° End Cutting Edge Angle for Negative Triangle TNM_ Inserts

$432.70 $700.98

SIMTJNL 40-5 — boring bar, 2.50" bar diameter, 3.062" minimum bore, 16.0" overall length. Made in the USA by RMC Tooling. -3° End Cutting Edge Angle for Negative Triangle TNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a...

SIMTFNL 16-3 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts

$259.63 $420.60

SIMTFNL 16-3 — boring bar, 1.00" bar diameter, 1.280" minimum bore, 12.0" overall length. Made in the USA by RMC Tooling. 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a...

TGR 24-6 Indexable Tool Holder for CNC Turning

$109.60 $177.56

TGR 24-6 — toolholder, 1.500" square shank, 7.0" overall length. Made in the USA by RMC Tooling. 0° Side Cutting Edge Angle for Triangle TNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool goes...

MTCNN664F Tool Holder 90° Lead Angle TNM 43 Insert

$220.41

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

TNMG 220408 Chip Breaker BG Grade FM2533 / TNMG 432 BG #FMCarbide

$10.44 $13.04

TNMG 220408 Chip Breaker BG Grade FM2533 / TNMG 432 BG #FMCarbide [10 inserts per box] Cutting parameters and speeds & feeds charts: Carbide End Mill Feeds and Speeds Explained

TNMG 220408 Chip Breaker BG Grade FM2553 / TNMG 432 BG #FMCarbide

$10.44 $13.04

TNMG 220408 Chip Breaker BG Grade FM2553 / TNMG 432 BG #FMCarbide [10 inserts per box] Cutting parameters and speeds & feeds charts: Carbide End Mill Feeds and Speeds Explained

SIMTFNR 16-3 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts

$259.63 $420.60

SIMTFNR 16-3 — boring bar, 1.00" bar diameter, 1.280" minimum bore, 12.0" overall length. Made in the USA by RMC Tooling. 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a...

CNMG 643 Turning Insert, RC Chipbreaker, 0.047" Corner Radius, Grade TN30

$23.71

Canela reference CNMG643RC — 80° rhombic turning insert, grade TN30. Original Canela indexable insert, 0.760" cutting edge and 0.047" corner radius. Sold individually, no minimum order.Specifications Reference: CNMG643RC Insert shape: 80° rhombic (C) Clearance angle: 0° Chipbreaker: RC Cutting edge length (l): 0.760" Thickness (T): 0.250" Inscribed circle (d): 0.750"...

WNMG 432 CHIP BREAKER MC GRADE TN35 / WNMG 080408 MC TN35

$10.66 $11.84

WNMG 432 CHIP BREAKER MC GRADE TN35 / WNMG 080408 MC TN35 Canela Turning Insert [10 inserts per box]

MTENN 64-3D Tool Holder 30 Side Cutting Edge Angle for Negative Triangle TNM_Inserts

$72.58 $90.73

MTENN 64-3D — toolholder, 0.750" × 1.000" shank (width × height), 6.0" overall length. Made in the USA by RMC Tooling. 30° Side Cutting Edge Angle for Negative Triangle TNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference...

TNMG 332 CHIP BREAKER MC GRADE TN30 / TNMG 160408 MC TN30

$9.25 $10.28

TNMG 332 CHIP BREAKER MC GRADE TN30 / TNMG 160408 MC TN30 Canela Turning Insert [10 inserts per box]

SIMTFNL 32-4 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts

$375.00 $607.50

SIMTFNL 32-4 — boring bar, 2.00" bar diameter, 2.562" minimum bore, 16.0" overall length. Made in the USA by RMC Tooling. 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a...

SI-MTFNR 28-3 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts

$290.38 $362.98

SI-MTFNR 28-3 — boring bar, 1.75" bar diameter, 2.030" minimum bore, 14.0" overall length. Made in the USA by RMC Tooling. 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a...

TNMG 160408 Chip Breaker BC Grade FM2533 / TNMG 332 BC #FMCarbide

$7.66 $9.57

TNMG 160408 Chip Breaker BC Grade FM2533 / TNMG 332 BC #FMCarbide [10 inserts per box] Cutting parameters and speeds & feeds charts: Carbide End Mill Feeds and Speeds Explained

MTCNN644F Tool Holder 90° Lead Angle TNM 43 Insert

$94.61

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

STVOL 24-66E Tool Holder O.D. Threading & Shallow Grooving for Triangle TNMC Inserts

$137.86 $172.33

STVOL 24-66E — toolholder, 1.500" square shank, 7.0" overall length. Made in the USA by RMC Tooling. O.D. Threading & Shallow Grooving for Triangle TNMC Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool goes...

STVOL 20-66D Tool Holder O.D. Threading & Shallow Grooving for Triangle TNMC Inserts

$115.41 $186.96

STVOL 20-66D — toolholder, 1.250" square shank, 6.0" overall length. Made in the USA by RMC Tooling. O.D. Threading & Shallow Grooving for Triangle TNMC Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool goes...

STVOL 20-4D Tool Holder O.D. Threading & Shallow Grooving for Triangle TNMC Inserts

$112.48 $182.22

STVOL 20-4D — toolholder, 1.250" square shank, 6.0" overall length. Made in the USA by RMC Tooling. O.D. Threading & Shallow Grooving for Triangle TNMC Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool goes...

TNMG 332 CHIP BREAKER MC GRADE TN35 / TNMG 160408 MC TN35

$9.25 $10.28

TNMG 332 CHIP BREAKER MC GRADE TN35 / TNMG 160408 MC TN35 Canela Turning Insert [10 inserts per box]

TNMG 160408 Chip Breaker BC Grade FM2553 / TNMG 332 BC #FMCarbide

$7.66 $9.57

TNMG 160408 Chip Breaker BC Grade FM2553 / TNMG 332 BC #FMCarbide [10 inserts per box] Cutting parameters and speeds & feeds charts: Carbide End Mill Feeds and Speeds Explained

STVOL 08-3A Tool Holder O.D. Threading & Shallow Grooving for Triangle TNMC Inserts

$72.58 $90.73

STVOL 08-3A — toolholder, 0.500" square shank, 4.0" overall length. Made in the USA by RMC Tooling. O.D. Threading & Shallow Grooving for Triangle TNMC Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool goes...

MTJNL 24-6E Tool Holder 3 Side Cutting Edge Angle for Negative Triangle TNM_Inserts

$109.60 $177.56

MTJNL 24-6E — toolholder, 1.500" square shank, 7.0" overall length. Made in the USA by RMC Tooling. 3°Side Cutting Edge Angle for Negative Triangle TNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool goes...

RMC Insert Shims — Models B SSQ-16-3 to ISSN-623

$7.46 $9.94

Replacement shims and shim seats for indexable turning and milling tool holders are available. The shim protects the holder pocket from insert breakage—replacing a worn shim is far cheaper than replacing the holder. Covers the common negative and positive insert geometries (CNMG, DNMG, SNMG, TNMG, WNMG, VNMG, and more—match the...

TGR 16-3 Indexable Tool Holder for CNC Turning

$83.65 $135.52

TGR 16-3 — toolholder, 1" square shank. Made in the USA by RMC Tooling. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool goes back into the turret at the same cutting-point location every time it...