Search results

S40V-MVUNR4 Boring Bar 93° Lead Angle VN 43 Insert

$442.99 each

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...

S32V-MVUNR4 Boring Bar 93° Lead Angle VN 43 Insert

$382.14 each

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...

S32V-MVUNL4 Boring Bar 93° Lead Angle VN 43 Insert

$382.14 each

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...

S40V-MVUNL4 Boring Bar 93° Lead Angle VN 43 Insert

$442.99 each

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...

MVJNL864D Tool Holder 93° Lead Angle VN 43 Insert

$126.81 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MVJNL854D Tool Holder 93° Lead Angle VN 43 Insert

$126.81 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MVJNR164D Tool Holder 93° Lead Angle VN 43 Insert

$123.17 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MVJNL204D Tool Holder 93° Lead Angle VN 43 Insert

$136.80 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MVJNR854D Tool Holder 93° Lead Angle VN 43 Insert

$126.81 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MVJNR204D Tool Holder 93° Lead Angle VN 43 Insert

$136.80 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MVJNL244E Tool Holder 93° Lead Angle VN 43 Insert

$175.20 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MVJNL164D Tool Holder 93° Lead Angle VN 43 Insert

$123.17 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MVJNR244E Tool Holder 93° Lead Angle VN 43 Insert

$175.20 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MVJNR864D Tool Holder 93° Lead Angle VN 43 Insert

$126.81 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MVVNN164D Tool Holder VN 43 Insert

$123.17 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MVVNN244E Tool Holder VN 43 Insert

$175.20 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MVVNN204D Tool Holder VN 43 Insert

$136.80 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MDJNL16CA-4C Cartridge 93° Lead Angle DN 43 Insert

$154.92 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MDJNL16CA-4C Dimension D: 2.362" Length (L): 2.480" Length (L1): 1.497" Width (b): 0.787" Dimension...

MDJNL20CA-4C Cartridge 93° Lead Angle DN 43 Insert

$169.47 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MDJNL20CA-4C Dimension D: 2.756" Length (L): 2.756" Length (L1): 1.575" Width (b): 0.787" Dimension...

S16T-MVUNL3 Boring Bar 93° Lead Angle VN 33 Insert

$279.79 each

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...

DVJNR123BAN Tool Holder 93° Lead Angle VN 33 Insert

$192.93 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MDJNR20CA-4C Cartridge 93° Lead Angle DN 43 Insert

$169.47 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MDJNR20CA-4C Dimension D: 2.756" Length (L): 2.756" Length (L1): 1.575" Width (b): 0.787" Dimension...

MDJNR16CA-4C Cartridge 93° Lead Angle DN 43 Insert

$154.92 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MDJNR16CA-4C Dimension D: 2.362" Length (L): 2.480" Length (L1): 1.497" Width (b): 0.787" Dimension...

MVVNN123B Tool Holder VN 33 Insert

$121.08 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

DVJNL123BAN Tool Holder 93° Lead Angle VN 33 Insert

$192.93 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

S16T-MVUNR3 Boring Bar 93° Lead Angle VN 33 Insert

$279.79 each

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...

MVJNL123B Tool Holder 93° Lead Angle VN 33 Insert

$121.08 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MVJNR123B Tool Holder 93° Lead Angle VN 33 Insert

$121.08 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

SIMVJNR 40-4 -3° Side Cutting Edge Angle for Negative 35° Diamond VNM_ Inserts

$461.54 each

SIMVJNR 40-4 — boring bar, 2.50" bar diameter, 3.750" minimum bore, 16.0" overall length. Made in the USA by RMC Tooling. -3° Side Cutting Edge Angle for Negative 35° Diamond VNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and...

SIMVJNL 40-4 -3° Side Cutting Edge Angle for Negative 35° Diamond VNM_ Inserts

$461.54 each

SIMVJNL 40-4 — boring bar, 2.50" bar diameter, 3.750" minimum bore, 16.0" overall length. Made in the USA by RMC Tooling. -3° Side Cutting Edge Angle for Negative 35° Diamond VNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and...

MVVNN163D Tool Holder VN 33 Insert

$123.17 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

S24U-MVUNR3 Boring Bar 93° Lead Angle VN 33 Insert

$339.48 each

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...

S20U-MVUNR3 Boring Bar 93° Lead Angle VN 33 Insert

$310.30 each

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...

MVJNL163D Tool Holder 93° Lead Angle VN 33 Insert

$123.17 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

S24U-MVUNL3 Boring Bar 93° Lead Angle VN 33 Insert

$339.48 each

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...

MVVNN203D Tool Holder VN 33 Insert

$136.80 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MVVNN243E Tool Holder VN 33 Insert

$175.20 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

S20U-MVUNL3 Boring Bar 93° Lead Angle VN 33 Insert

$310.30 each

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...

DVJNR203DAN Tool Holder 93° Lead Angle VN 33 Insert

$217.78 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

DVJNL243EAN Tool Holder 93° Lead Angle VN 33 Insert

$232.95 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

DVJNL203DAN Tool Holder 93° Lead Angle VN 33 Insert

$217.78 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

PSC40-MVUNR27120-16 PSC Modular Boring Bar, 1.969" Min. Bore, 93° Lead Angle, Right Hand

$369.30 each

Canela reference PSC40-MVUNR27120-16 — PSC modular boring bar, right hand. Internal turning and profiling boring bar equipped with rhombic negative double-sided insert (angle 35°). PSC with internal coolant. The PSC polygonal shank coupling (ISO 26623-1) clamps from inside, so the bar changes in seconds and repeats to the micron.Specifications Reference:...

DVJNR163DAN Tool Holder 93° Lead Angle VN 33 Insert

$196.57 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MVJNR203D Tool Holder 93° Lead Angle VN 33 Insert

$136.80 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MVJNL203D Tool Holder 93° Lead Angle VN 33 Insert

$136.80 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

DVJNL163DAN Tool Holder 93° Lead Angle VN 33 Insert

$196.57 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

PSC40-MVUNL27120-16 PSC Modular Boring Bar, 1.969" Min. Bore, 93° Lead Angle, Left Hand

$369.30 each

Canela reference PSC40-MVUNL27120-16 — PSC modular boring bar, left hand. Internal turning and profiling boring bar equipped with rhombic negative double-sided insert (angle 35°). PSC with internal coolant. The PSC polygonal shank coupling (ISO 26623-1) clamps from inside, so the bar changes in seconds and repeats to the micron.Specifications Reference:...

MVJNR163D Tool Holder 93° Lead Angle VN 33 Insert

$123.17 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

DVJNR243EAN Tool Holder 93° Lead Angle VN 33 Insert

$232.95 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

RMC Insert Shims — Models MTN-432 to TSN-533

$7.46 each

Replacement shims and shim seats for indexable turning and milling tool holders are available. The shim protects the holder pocket from insert breakage—replacing a worn shim is far cheaper than replacing the holder. Covers the common negative and positive insert geometries (CNMG, DNMG, SNMG, TNMG, WNMG, VNMG, and more—match the...