SIMCKNL 24-5 — boring bar, 1-1/2" bar diameter. Made in the USA by RMC Tooling.
Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a rigid clamping system sized to the bar diameter — the combination that keeps chatter down at the depths where boring bars usually give up.
Sized by minimum bore, so start there: pick the largest bar diameter your bore will clear. Every clamp, lock pin, seat and screw in this bar is a stocked RMC service part, listed below.
These are the service parts RMC lists for this style and insert size. Every one is stocked.
| Insert | CNM_-543 (e.g. CNMG 543) — 5/8" I.C. · 1/4" thick · 3/64" nose radius |
| Seat / shim | ICSN-533 |
| Lock pin | NL-58 |
| Clamp | CL-12 |
| Clamp screw | XNS-510 |
| Seat screw | S-58 |
See all RMC spare parts & hardware →
Not sure how to read an insert code? Turning insert designation explained.
Specifications decoded from the RMC toolholder identification system (RMC 2020 catalog, page 2).
