The carbide tools FM Carbide customers order most — proven inserts, high-performance end mills, tool holders and reamers, ready to ship. FM Carbide helps you machine better!
Canela antivibratory adaptors for end mills and shell mills, built with materials and mechanisms that damp vibration. Standard and extra-long reaches for mould work and deep cavities, in CAT, DIN 69871-A, BT and HSK tapers, with internal-coolant versions available.
Canela tooling systems: antivibratory end mill and shell mill adaptors, mill adaptors and milling cutter arbors, cylindrical modular shanks and ER20 center drill holders. CAT, DIN 69871-A, JIS B 6339-BT and HSK Form A tapers. Every page lists the taper, the head thread and the clamping torque, so you can...
A cartridge is the cutting unit on its own — insert seat, clamp and screw, with no shank. It bolts into a boring head, a modular bar or a special tool body, so one body can run several sizes, and a worn seat is replaced instead of the whole tool....
Canela ceramic turning inserts in rhombic, square, triangular, round and trigon shapes, in grades CC2, CC7, CW1, CX6 and CX9 for cast iron, heat-resistant alloys and hard materials. Every page gives the cutting edge length, thickness, inscribed circle and corner radius, the material the grade is built for, and the...
Canela toolholders built for ceramic inserts — face turning, profiling, external turning and chamfering, in square shanks from 3/4" to 1-1/4". Every page gives the shank dimensions, the lead angle, the insert size, the tightening torque and links to the shim seat, clamp, screw and wrench that fit it.
Canela ceramic turning tools: toolholders for face turning, profiling and external turning, ceramic inserts in oxide and whisker-reinforced grades, and the shim seats, clamps and screws that go with them. Ceramic cutting is for cast iron, heat-resistant alloys and hardened materials at speeds carbide cannot reach. Every holder page lists...
Canela indexable chamfering and corner radius milling cutters: 75° shell mills, 45° chamfer mills and an adjustable 10°–80° cutter. Indexable inserts mean no regrinding — you index an edge and keep cutting.
Canela Drilling Inserts — indexable carbide drilling inserts at direct pricing. How to read a title in 10 seconds: shape code (SPMT) → size (060304) → grade (TL40…). Not sure which fits your drill body? Ask us — machinist-to-machinist, we'll recommend one. Jump to your insert shape: SPMT (3) These...
Canela indexable insert drill bodies, 3xD, in straight-shank and PSC modular versions. The cutting is done by two replaceable carbide inserts; matching drilling inserts are listed separately.
Canela mill adaptors and milling cutter arbors for screw-on modular milling heads, in DIN 69871-A, JIS B 6339-BT and HSK Form A tapers with M10, M12 and M16 threads. Each one lists the clamping torque for the head screw.
Canela indexable milling cutters: square shoulder end mills and mill heads, face mills, shell mills, chamfer and corner radius cutters, and slot cutters. Every cutter lists its insert size, insert screw, wrench and tightening torque, so you can order the tool and its consumables in one place.
Canela Milling Inserts — indexable carbide milling inserts at direct pricing. How to read a title in 10 seconds: shape code (ADMW) → size → geometry/radius → grade (TIN25, TL40…). Not sure which fits your cutter? Ask us — machinist-to-machinist, we'll recommend one. Jump to your insert shape: Shoulder milling:...
Canela steel cylindrical shanks for screw-on modular milling heads, 1/2" to 1" diameter in 5", 6" and 8" lengths, with M6 to M12 threads. HD versions are antivibration shanks. Each page lists the head thread and its clamping torque.
The complete Canela parting and grooving system: toolholders for single-ended and modular-blade inserts, tool blocks, Top Notch grooving and threading tools and boring bars, every insert that runs in them, and the screws, clamps, shim seats and lock pins that hold it all together. Every tool page lists the insert...
Canela inserts for parting, grooving, profiling and threading: double-ended WDM inserts for modular blades, single-ended MRCN, PTNT blade inserts, and the NG, NR and NT Top Notch range. Filter by insert family, groove width or grade. Every insert is priced online and sold individually, no minimum order.
Canela external parting and grooving toolholders: the CZCB family for single-ended MRCN inserts, and the CZGD and CZFD modular-blade holders for double-ended WDM inserts. Every page gives the shank, the insert it takes, the tightening torque and the spare parts that fit it.
Canela PSC modular boring bars, sizes PSC32 to PSC63, in dimple lock, wedge clamp, double lock, lever lock and center screw clamping. The polygonal shank coupling (ISO 26623-1) clamps from inside, so a bar changes in seconds and repeats to the micron. Every page gives the minimum bore, bar diameter,...
Canela PSC modular indexable insert drills, 3xD, in couplings PSC40, PSC50 and PSC63, from 15 mm to 43 mm diameter. Helical flute with a neutral-rake geometry and screw-down square SPMT inserts, and internal coolant through the PSC coupling. Every page gives the drill diameter in inch and millimetre, the maximum...
Canela PSC modular machine interface: DIN 69871-A, BT and HSK-A machine adaptors, PSC extensions and reducers, blank adaptors, test arbors and coupling caps. Priced online by FM Carbide, an Authorized Canela Corp. Distributor.New to the system? PSC Modular Tooling Explained — the polygon coupling, the six sizes, and how to...
The Canela PSC modular system, ISO 26623-1 polygonal shank coupling. The coupling clamps from inside the taper, so a head changes in seconds and repeats to the micron — one machine-side adaptor and a rack of cutting heads instead of a rack of complete tools. Turning heads with dimple lock,...
Canela PSC modular parting, grooving and Top Notch tools: CZCD holders for double-sided WDM inserts, CZFD and CZGD modular blade holders, and the NE, NR and NS Top Notch heads and boring bars. The polygonal shank coupling (ISO 26623-1) clamps from inside, so the tool changes in seconds and repeats...
Canela PSC modular threading tools: SE external threading heads and SI internal threading boring bars, sizes PSC32 to PSC80. The polygonal shank coupling (ISO 26623-1) clamps from inside, so the tool changes in seconds and repeats to the micron. Every page gives the insert code, the threading inserts we stock...
The tool-side half of the Canela PSC system: collet chucks, end mill and shell mill adaptors, boring bar holders, turning toolholder adaptors, mini-turrets, blade adaptors, drill chucks and tapping heads — all on the PSC polygon coupling.New to the system? PSC Modular Tooling Explained — the polygon coupling, the six...
Canela PSC modular turning heads in couplings PSC 32, 40, 50, 63 and 80. Filter by clamping system — dimple lock for negative double-sided inserts, lever lock for heavy cutting, center screw for positive inserts — or by lead angle, insert size and hand of tool. Every head lists the...
Canela PSC modular adaptors that hold the cutting tool: shell mill and Weldon / Whistle-Notch end mill adaptors, ER and type-C collet chucks, boring bar holders, drill chucks, Morse taper reducers and quick-change tapping heads, in couplings PSC32 to PSC100. The polygonal shank coupling (ISO 26623-1) clamps from inside, so...
Canela · PSC modular cutting heads What size is your PSC coupling? The size is stamped on your turret or machine adaptor: the number is the coupling diameter in millimeters. Pick it, then narrow by what the head does. PSC32126PSC40270PSC50312PSC63227PSC8062 Or by what the head does Turning headsBoring barsThreadingParting, grooving...
Canela PSC modular adaptors for square turning toolholders and parting blades, plus multipurpose mini-turrets. Axial, angular and radial mounting, PSC 40 to PSC 100. Priced online by FM Carbide, an Authorized Canela Corp. Distributor.New to the system? PSC Modular Tooling Explained — the polygon coupling, the six sizes, and how...
Canela 92° indexable slot cutters for deep slotting and grooving, 4" to 8" diameter with cutting widths from 0.161" to 0.500". They run SNHX inserts and mount on a standard arbor bore.
Canela · Spare parts What part do you need? The fastest route is the tool itself: every Canela toolholder, boring bar, cartridge and PSC head page lists the exact spare parts that fit it, with prices. If you have the 4-digit Canela reference, search it. Otherwise start with the type...
Canela · Threading What thread are you cutting? Start with the thread form: it decides the insert, and the insert decides the holder. Every tool page lists the insert it takes, its screw, wrench, shim seats and the tightening torque. ISO metric, full form96Whitworth BSW, full form92Partial profile 60°28Partial profile...
Canela internal threading boring bars for negative lay-down inserts, from 0.380" to 2.5" bar diameter, plus vertical on-edge and API bars. Each one lists its minimum bore and the insert size it takes.
Canela indexable threading inserts for external and internal threading, in ISO metric full form, Whitworth BSW full form, partial profile 55° and 60°, plus type LG lock ring grooving inserts. Every page gives the thread form, the pitch or threads per inch, the inscribed circle and the cutting edge length,...
Canela external threading tool holders: multipurpose lay-down holders from 0.312" to 1.5" shank, vertical on-edge holders and API holders. Right and left hand.
Canela CPTS and DPTS tool blocks for parting blades, built with two slot-guides that keep the blade guided, for manual and C.N.C. lathes. The DPTS blocks use a two-part fixing system for machines with difficult access.
The Canela Top Notch system: external toolholders at 93 and 45 degrees, grooving and threading boring bars, and the NG, NR and NT inserts that run in them. Top Notch tools clamp the insert from the top, so you index the insert without taking the tool out of the turret....
Canela Turning Inserts — indexable carbide turning inserts in proven TN15, TN30 and TN35 grades, at direct pricing. How to read a title in 10 seconds: shape code (CNMG) → inch size (431) → chip breaker (FC, MC, MFC…) → grade (TN15, TN30, TN35), followed by the metric equivalent (120404...
Solid carbide · Uncoated Find your center drill. Filter by size, point angle, and dimensions to narrow your selection. View the center drill size chart ↗ 60°82°90° Filter center drills ＋ Filters Clear all Center drill sizeAll sizes Point angleAll angles Drill point diameterAll diameters Body diameterAll diameters Overall lengthAll...
CNMG is the 80° diamond-shaped insert used on most CNC lathes. C is the 80° rhombic shape, N means 0° relief (a negative insert), M is the tolerance class, and G means a center hole with chip breakers on both sides, so each insert gives you four cutting corners.ISO and...
Coolant that misses the cut does no work. These are the components for putting it exactly where it belongs and keeping it there: Hirt Line modular coolant systems, built from sealed ball-joint segments clamped by screw nuts, so a line articulates freely when the nut is loose and holds its...
DNMG is the 55° diamond-shaped turning insert, the choice for profiling and turning close to a shoulder. D is the 55° rhombic shape, N means 0° relief (a negative insert), M is the tolerance class, and G means a center hole with chip breakers on both sides, so each insert...
HTC General Purpose Solid Carbide End Mills — made in Michigan, USA, for steel, stainless and aluminum. Not sure which family fits your job? Take the 2-question selector.
Machinist resources: Speeds & Feeds Calculators · Chip Load Calculator · MRR Calculator · Troubleshooting · Carbide vs. HSS Guide
HTC Hot Mills — USA-made solid carbide end mills engineered for hardened steels and high-temperature alloys. Not sure which family fits your job? Take the 2-question selector.
Machinist resources: Speeds & Feeds Calculators · Chip Load Calculator · MRR Calculator · Troubleshooting · Carbide vs. HSS Guide
FM Carbide Drill Inserts — indexable drilling inserts in FM125 grade (multi-purpose PVD for steels, stainless, cast iron and super-alloys), at direct pricing. How to read a title in 10 seconds: shape code (SPMX) → size (110408) → grade (FM125). See FM125 cutting speeds by material → Or ask us...
FM Carbide Milling Inserts — indexable milling inserts in FM125 grade (multi-purpose PVD for steels, stainless, cast iron and super-alloys), at direct pricing. How to read a title in 10 seconds: shape code (APKT) → size (100308) → geometry → grade (FM125). See FM125 cutting speeds by material → Or...
FM Carbide Turning Inserts — premium indexable inserts in proven grades and chip breakers, at direct pricing. How to read a title in 10 seconds: shape code (CNMG) → size (120404 metric / 431 inch — same insert, two names) → chip breaker (BF, BG, BL…) → grade (FM324, FM524…)....
Carbide turning, milling and drilling inserts from FM Carbide, in the grades and chip breakers we stock for general production work. Browse the full range by insert family in Turning Inserts and Milling Inserts, or see the grade and chip breaker guide to match a grade to your material.
The smallest of the four Hirt Line systems: 3.2 mm flow size on a 1/8" thread. It is the one to use where there is no room for anything larger — Swiss machines, small turning centers, tight tool envelopes, single-point delivery onto a fine cut.Everything here carries the Typ 0...
The general-purpose Hirt Line system and the one most shops standardize on: 5.8 mm flow size on a 1/4" thread. Enough volume for most milling and turning work, small enough to route around a fixture.The widest selection of the four, with 93 parts in stock: adapters onto pipe threads from...
The flood-cooling size: 11 mm flow size on a 1/2" thread. This is the system for heavy roughing, for clearing chips rather than just wetting the cut, and for the wide flat-jet nozzles that cover a face mill or a shoulder in one stream.Flat nozzles up to 70 mm wide...
The largest Hirt Line system: 19 mm flow size on a 3/4" thread. Specified where the job is moving volume — large machining centers, chip flushing, washdown, and coolant delivery on parts big enough that a smaller line simply cannot keep the cut covered.Round nozzles to Ø19 mm, flat jets...
Solid carbide finishing end mills from HTC for fine surface finishes, profiling, contouring, and precision milling. Browse coated and uncoated geometries across a wide range of diameters, flute counts, and lengths.
A corner rounding cutter puts a consistent radius on an edge in one pass, which is what a drawing means when it calls for a broken edge to a stated size rather than "deburr". The radius is ground into the tool, so every part comes off the machine the same...
Shop HTC cobalt high-speed steel finishing end mills in bright, TiN, TiCN, and TiAlN finishes. Choose miniature, stub, regular, long, and positive-lock styles for precise finishing of slots, pockets, shoulders, side walls, and contoured surfaces.
Shop HTC cobalt high-speed steel roughing end mills for aggressive stock removal, reduced cutting forces, and dependable performance. Choose bright, TiN, TiCN, and TiAlN finishes in miniature through extra-long styles.
A tapered end mill cuts a wall that is not perpendicular to the floor. That is what draft angles on injection molds and die cavities need, and it is why these tools live in mold shops: one pass produces the finished angled wall instead of a stepped approximation that then...
HTC Countersinks — made in Michigan, USA, in 60°, 82°, 90°, 100° and 120° included angles, single-end and double-end. Not sure which angle your job needs? Read: Countersink Angles Explained.
Machinist resources: Speeds & Feeds Calculators · Chip Load Calculator · MRR Calculator · Troubleshooting
Shop current HTC solid carbide drills organized by drill style, size, point geometry, flute count, and coating.Compare jobber-length, screw-machine-length, metric, straight-flute, spotting, center, spade, and drill-mill designs. Each product page provides clear dimensions, material, coating, weight, item number, and current cost-based selling price.
High-speed steel Bridgeport end mills with large cutting diameters and reduced shanks for rigid milling on Bridgeport-style and production machines. Available in stub and long lengths, center-cutting and non-center-cutting geometries, and Bright, TiCN, TiAlN, and TiN-V finishes.
A rotary burr removes metal where a milling cutter cannot reach or cannot be set up: weld beads, cast flash, port work, die and mold blending, and every deburring job that ends up in a die grinder rather than on a machine.These are high-speed steel, which is the deliberate choice...
HTC high-speed steel corner rounding cutters for machining consistent external radii, edge blends, shoulders, slots, plates, and contoured workpieces. Available in inch and metric radii, 3- and 4-flute styles, and multiple coatings.
A countersink cuts the cone that lets a flat-head screw finish flush with the surface. The whole job is decided by one number: the included angle, which has to match the fastener, not the drawing’s idea of a chamfer.Pick the angle first 82° — the standard for inch flat-head machine...
High-speed steel and cobalt finishing end mills for controlled sizing and surface-finish passes. Explore square-end and ball-nose geometries, multiple length styles, metric and aluminum-cutting options, plus Bright, TiCN, TiAlN, and TiN-V finishes.
High-speed steel keyway cutters manufactured to keyway-tolerance geometry for accurate slots, grooves, repair work, and production milling. Available in bright, TiCN, TiAlN, and TiN-V finishes.
High-speed steel roughing end mills with chip-breaking cutting edges for efficient stock removal. Available in regular, medium, long, and extra-long lengths with Bright, TiCN, TiAlN, and TiN-V finishes.
High-speed steel screw-machine-length end mills with short reach for rigid setups, reduced deflection, accurate slotting, pocketing, and profile milling. Available in bright, TiCN, TiAlN, and TiN-V finishes.
HTC HSS and cobalt high-speed steel tapered end mills for machining angled walls, tapered slots, pockets, molds, dies, and contoured features. Available in multiple taper angles, cutting diameters, lengths, flute counts, and coatings.
Small-bore boring is where indexable tooling runs out of room. Below about half an inch there is no space to seat an insert and a screw, so the bar has to be ground from one piece — and in a bore that small, the bar is thin enough that its...
Straight threaded shanks in high-speed steel — the arbor that carries HTC's threaded-shank cutters. The plain end goes into your holder or collet; the cutter screws onto the threaded end and seats against the shoulder, which squares it to the axis and takes the cutting load.Pick the shank by two...
RMC indexable interchangeable heads for CNC turning, lathe work, and precision metalworking. Modular tooling heads compatible with indexable turning systems. 194 heads across 48 ANSI styles — jump straight to your code instead of scrolling. Quick read: the letters tell you the clamping system, the insert shape the head takes...
HTC SOLID CARBIDE PRECISION IN MILLIMETERS Metric end mills from 1 mm to 25 mm in 0.5 mm increments. Start with the cutting profile, then refine by flute count, coating, length, and diameter. STEP 1 CHOOSE THE CUTTING PROFILE Select the geometry that matches the surface or feature you need to machine. SQUARE...
Multi-Flute Mills — 5 to 12 Flutes — more teeth means more feed at the same chip load, and finer finishes in steels and stainless. Tough Mill 5-flute and High Performance 45° helix lines, square and corner radius. Made in Michigan, USA, at direct pricing. How to read a title...
🇺🇸 HTC solid carbide reamers — made in Michigan, USA. Chucking reamers for precision hole sizing: 783 active sizes from 0.0280" to 0.7510", standard length, uncoated, in stock at direct pricing. Know your size? Jump straight to it Find my reamer → Accepts decimal (0.0520), fraction (3/64), wire gauge (#55),...
Genuine RMC replacement hardware for indexable tool holders — screws, lock pins, cam pins, clamps, insert shims, chipbreakers and Torx wrenches. Keep spares on hand: the cheapest part in your tooling system is the one that stops the machine when it's missing. FM Carbide helps you machine better!
External and internal threading and shallow grooving toolholders from RMC Tooling, machined in the United States. Covers the MTVO, MTHO, STVO, STHO and STZO laydown threading styles for triangle inserts, and the NS / NE gang holders for NG threading and grooving inserts.
Turbo Mills — HOG Roughing End Mills — solid carbide 5-flute roughers with 45° helix and chamfered cutting edge, built to hog material fast. Made in Michigan, USA, at direct pricing. How to read a title in 10 seconds: diameter → LOC / OAL → flutes → coating. Not sure...
Solid carbide ball nose end mills from HTC Mfg., made in the USA. Full-radius cutters for 3D contouring, die and mold work, fillets and finishing passes.Stub, standard, long and extra-long lengths, single and double end, in 2 and 4 flute, uncoated or coated in TiN, TiCN, AlTiN and SKY COAT.
Solid carbide corner radius end mills from HTC Mfg., made in the USA. The rounded corner spreads the cutting load away from the sharp edge, so the tool lasts longer in hard material and leaves a filleted floor in one pass.Corner radii from .010 to .125, uncoated or coated in...
Solid carbide countersinks from HTC Mfg., made in the USA. Carbide holds its edge in hardened steel, stainless and abrasive material where a high speed steel countersink would dull.Single flute and multi-flute, 60°, 82°, 90° and 100° included angles.
Solid carbide long reach end mills from HTC Mfg., made in the USA. A necked-down shank clears the walls of deep pockets so the cutting edge can work at depth without the body rubbing.Square and ball nose, single end, uncoated or coated in AlTiN.
Solid carbide mini end mills from HTC Mfg., made in the USA. Small-diameter cutters on a standard shank for fine detail, small slots and engraving-scale work.Single end, square, 2 flute, uncoated.
Solid carbide profiling end mills from HTC Mfg., made in the USA. Ball nose cutters ground for continuous profiling passes on contoured surfaces.Single end, AlTiN coated.
Solid carbide roughing end mills from HTC Mfg., made in the USA. The knuckle profile breaks the chip into short pieces, which cuts the cutting force and lets the tool take a far heavier cut than a plain end mill.Fine and medium pitch, 25° to 45° helix, including series for...
Solid carbide square end mills from HTC Mfg., made in the USA. Flat-bottom cutters for slotting, shouldering and general profiling in steel, stainless, cast iron and aluminum.Stub, standard, long and extra-long lengths, single and double end, in 2, 3 and 4 flute, uncoated or coated in TiN, TiCN, AlTiN and...
Solid carbide straight flute end mills from HTC Mfg., made in the USA. With no helix there is no axial pull, so the cutter will not lift thin stock or chip the edge of brittle material.Single end, center cutting, uncoated.
Solid carbide tapered end mills from HTC Mfg., made in the USA. Angled cutters for draft angles in die and mold cavities, and for reaching into tapered walls without rubbing.Center cutting, single end, 3 flute, coated in TiN, TiCN and AlTiN.
HTC SOLID CARBIDE EVERYDAY CARBIDE MILLING Square, ball-nose, corner-radius, and general-purpose geometries for common milling operations. Choose the cutting profile first, then refine by length and size. START HERE SHOP BY CUTTING PROFILE Go directly to the geometry that matches the feature you need to machine. SQUARE ENDFLAT-BOTTOM CUTTING Slots,...
Tap-Paste is a hand-applied cutting and tapping lubricant, made in the USA, for the operations where the machine's coolant does not reach the cut: tapping, drilling, reaming, broaching, knurling and hand cutting.It is thicker than a cutting oil but still flows, so it stays on the flutes and on the...
TNMG is the 60° triangular turning insert. T is the triangle shape, N means 0° relief, M is the tolerance class, and G means a center hole with chip breakers on both sides, so each insert gives you six cutting corners.ISO and ANSI codes name the same insert: TNMG 160408...
WNMG is the 80° trigon turning insert: the strength of an 80° corner, with three corners per side on a double-sided insert, so each one gives you six cutting corners. W is the trigon shape, N means 0° relief (a negative insert), M is the tolerance class, and G means...
