5/32" End Mill Single End Square. Flute Length 9/16 " - OAL 2" - 2 Flutes Sky Coat — HTC Mfg.
5/32" End Mill Single End Square. Flute Length 9/16 " - OAL 2" - 2 Flutes Sky Coat
5/32" End Mill Single End Square. Flute Length 9/16 " - OAL 2" - 2 Flutes Sky Coat — HTC Mfg.
5/32" End Mill Single End Square. Flute Length 9/16 " - OAL 2" - 2 Flutes Sky Coat

5/32" End Mill Single End Square. Flute Length 9/16 " - OAL 2" - 2 Flutes Sky Coat

End Mill
$12.24 each
Item #
Series
Coating
Quantity
- +

5/32" cutting diameter, 2 flutes, single end, square end, Sky Coat coated.

Ground from solid carbide. This tool cuts 5/32" diameter, has 9/16" of flute and measures 2" overall.

The square end cuts a flat floor with a sharp corner — slots, pockets, shoulders and side milling.

The Sky Coat finish is intended to support lubricity and wear resistance in milling applications.

Specifications

  • Cutting diameter: 5/32"
  • Length of cut (LOC): 9/16"
  • Overall length (OAL): 2"
  • Flutes: 2
  • End type: Single End
  • End geometry: Square End
  • Coating: Sky Coat
  • Tool material: Solid Carbide
  • Series: 131
  • Item number: 131-2156

Recently viewed

Dial In Your Cut

Free TechTips resources for end mill users — machinist tested.

Speeds & Feeds CalculatorsThe right RPM and feed rate for your end mill, material and setup.Open calculator → Chip Load (FPT) CalculatorFeed per tooth keeps carbide cutting instead of rubbing — with chip thinning compensation.Open calculator → MRR CalculatorHow hard your end mill is really working, and where your cycle time goes.Open calculator →

More help: Milling TechTips · Troubleshooting · Carbide vs. HSS Guide