5/16" End Mill Single End Square. Long Length. Flute Length 1-1/8" OAL 3" - 2 Flutes TiN Coated
5/16" End Mill Single End Square. Long Length. Flute Length 1-1/8" OAL 3" - 2 Flutes TiN Coated
5/16" End Mill Single End Square. Long Length. Flute Length 1-1/8" OAL 3" - 2 Flutes TiN Coated
5/16" End Mill Single End Square. Long Length. Flute Length 1-1/8" OAL 3" - 2 Flutes TiN Coated
5/16" End Mill Single End Square. Long Length. Flute Length 1-1/8" OAL 3" - 2 Flutes TiN Coated
5/16" End Mill Single End Square. Long Length. Flute Length 1-1/8" OAL 3" - 2 Flutes TiN Coated
5/16" End Mill Single End Square. Long Length. Flute Length 1-1/8" OAL 3" - 2 Flutes TiN Coated
5/16" End Mill Single End Square. Long Length. Flute Length 1-1/8" OAL 3" - 2 Flutes TiN Coated
5/16" End Mill Single End Square. Long Length. Flute Length 1-1/8" OAL 3" - 2 Flutes TiN Coated
5/16" End Mill Single End Square. Long Length. Flute Length 1-1/8" OAL 3" - 2 Flutes TiN Coated
5/16" End Mill Single End Square. Long Length. Flute Length 1-1/8" OAL 3" - 2 Flutes TiN Coated
5/16" End Mill Single End Square. Long Length. Flute Length 1-1/8" OAL 3" - 2 Flutes TiN Coated
5/16" End Mill Single End Square. Long Length. Flute Length 1-1/8" OAL 3" - 2 Flutes TiN Coated
5/16" End Mill Single End Square. Long Length. Flute Length 1-1/8" OAL 3" - 2 Flutes TiN Coated

5/16" End Mill Single End Square. Long Length. Flute Length 1-1/8" OAL 3" - 2 Flutes TiN Coated

End Mill
$20.55 each
Item #
Series
Coating
Quantity
- +

5/16" Solid Carbide End Mill Single End Square. Long Length. Flute Length 1-1/8" OAL 3" - 2 Flutes TiN Coated

General Purpose

Recently viewed

Dial In Your Cut

Free TechTips resources for end mill users — machinist tested.

Speeds & Feeds CalculatorsThe right RPM and feed rate for your end mill, material and setup.Open calculator → Chip Load (FPT) CalculatorFeed per tooth keeps carbide cutting instead of rubbing — with chip thinning compensation.Open calculator → MRR CalculatorHow hard your end mill is really working, and where your cycle time goes.Open calculator →

More help: Milling TechTips · Troubleshooting · Carbide vs. HSS Guide