7/16" End Mill Single End Ball Nose. Long Length. Flute Length 2" OAL 4" - 4 Flutes TiCN Coated

7/16" End Mill Single End Ball Nose. Long Length. Flute Length 2" OAL 4" - 4 Flutes TiCN Coated

End Mill
$52.90 each
Item #
Series
Coating
Quantity
- +

7/16" cutting diameter, 4 flutes, single end, ball nose, long length, TiCN coated.

Ground from solid carbide. This tool cuts 7/16" diameter, has 2" of flute and measures 4" overall.

The ball nose leaves a radiused bottom, which is what you want for 3D contours, fillets and mould surfaces rather than flat floors.

The long flute gives more usable depth than a standard length.

TiCN is harder than TiN and holds up better in abrasive materials and higher feeds.

Specifications

  • Cutting diameter: 7/16"
  • Length of cut (LOC): 2"
  • Overall length (OAL): 4"
  • Flutes: 4
  • End type: Single End
  • End geometry: Ball Nose
  • Length style: Long
  • Coating: TiCN
  • Tool material: Solid Carbide
  • Series: 159
  • Item number: 159-4437

Recently viewed

Dial In Your Cut

Free TechTips resources for end mill users — machinist tested.

Speeds & Feeds CalculatorsThe right RPM and feed rate for your end mill, material and setup.Open calculator → Chip Load (FPT) CalculatorFeed per tooth keeps carbide cutting instead of rubbing — with chip thinning compensation.Open calculator → MRR CalculatorHow hard your end mill is really working, and where your cycle time goes.Open calculator →

More help: Milling TechTips · Troubleshooting · Carbide vs. HSS Guide