2-DU-10 Nozzle Straight Ø10 mm — Hirt Line 1/2" System
2-DU-10 FM Carbide technical drawing with metric and U.S. dimensions
2-DU-10 Nozzle Straight Ø10 mm — Hirt Line 1/2" System
2-DU-10 FM Carbide technical drawing with metric and U.S. dimensions

2-DU-10 Nozzle Straight Ø10 mm — Hirt Line 1/2" System

Nozzles
$20.49 each

2-DU-10 Straight Round Nozzle provides a straight round coolant stream through its Ø10.0 mm / 0.394 in.

Use it where a concentrated stream is needed at a turning, milling or grinding interface. The mechanically sealed Typ2 joint allows precise aiming without elastomer sealing rings.

Technical Specifications

Part number 2-DU-10
Product type Straight Round Nozzle
System Hirt-Line Typ2 (1/2-inch system)
System connection M24×1.25 nut
System flow size 11 mm / 0.433 in
Outlet geometry Ø10.0 mm / 0.394 in outlet
Stream pattern Targeted straight stream
Overall length 33 mm / 1.299 in
Effective installation length 27 mm / 1.063 in
Body outside diameter Ø15.2 mm / Ø0.598 in
Wrench size SW27 nut · SW13 body
Material 1.4305 stainless steel (AISI 303); 1.4404 stainless steel option available from the manufacturer
Temperature range −100 °C to +300 °C / −148 °F to +572 °F
Maximum pressure 100 bar / 1450 psi
Weight 46 g / 1.62 oz

Selection guidance: Confirm the M24×1.25 Typ2 connection, available installation envelope and required outlet pattern before ordering. Carrier flow requirements depend on coolant viscosity, pressure and the complete line configuration.

Browse the complete Hirt-Line Typ2 coolant system or contact FM Carbide technical support for configuration assistance.

Availability and Shipping

Hirt-Line maintains substantial stock in the USA. If this item is not in stock, estimated time to ship is 7–10 calendar days.

Estimated time to ship is measured from order placement until carrier handoff. Carrier transit time is additional. Orders may ship sooner. Please contact us before ordering if you need a specific shipping date.

See our Shipping Policy for details.

Recently viewed