5/16" Solid Carbide End Mill Double End Square. W/Weldon Flats. Shank OD 3/8", Flute Length 3/4", OAL 3-1/2'' - 2 Flutes Sky Coat

5/16" cutting diameter, 2 flutes, double end, square end, with Weldon flats, Sky Coat coated.

Ground from solid carbide. This tool cuts 5/16" diameter, runs a 3/8" shank, has 3/4" of flute and measures 3-1/2" overall.

The square end cuts a flat floor with a sharp corner — slots, pockets, shoulders and side milling.

Double ended with Weldon flats: two cutting ends on one body, and the flats give the holder a positive grip so the tool cannot pull out under load.

The Sky Coat finish is intended to support lubricity and wear resistance in milling applications.

Specifications

• Cutting diameter: 5/16"
• Shank diameter: 3/8"
• Length of cut (LOC): 3/4"
• Overall length (OAL): 3-1/2"
• Flutes: 2
• End type: Double End
• End geometry: Square End
• Length style: Double End with Weldon Flats
• Coating: Sky Coat
• Tool material: Solid Carbide
• Series: 213
• Item number: 213-2312