1/4" End Mill HOG Mill Single End. Medium Pitch Knuckle Rougher. 25 Degree Helix. Chamfer Width .020" - Shank OD 1/4" LOC 3/4" OAL 2-1/2" - 3 Flutes - AlTiN Coated

1/4" cutting diameter, 3 flutes, single end, AlTiN coated.

Ground from solid carbide. This tool cuts 1/4" diameter, runs a 1/4" shank, has 3/4" of flute and measures 2-1/2" overall. The flutes are cut at a 25° helix.

This is a rougher: the chip-breaking edge form cuts the cutting pressure and breaks the chip into short pieces, so it removes stock faster than a finishing tool at the same power.

AlTiN is built for heat: stainless, tool steels and high-temperature alloys, especially with little or no coolant.

Specifications

• Cutting diameter: 1/4"
• Shank diameter: 1/4"
• Length of cut (LOC): 3/4"
• Overall length (OAL): 2-1/2"
• Flutes: 3
• End type: Single End
• Helix angle: 25°
• Cutting style: Roughing / chip-breaking
• Coating: AlTiN
• Tool material: Solid Carbide
• Series: 314
• Item number: 314-9606