5/8" End Mill HOG Mill Single End. Medium Pitch Knuckle Rougher 45 Degree Helix. Shank OD 5/8". LOC 3/4" OAL 3-1/2" - 4 Flutes - Uncoated

5/8" cutting diameter, 4 flutes, single end, uncoated.

Ground from solid carbide. This tool cuts 5/8" diameter, runs a 5/8" shank, has 3/4" of flute and measures 3-1/2" overall. The flutes are cut at a 45° helix.

This is a rougher: the chip-breaking edge form cuts the cutting pressure and breaks the chip into short pieces, so it removes stock faster than a finishing tool at the same power.

Uncoated, so the edge stays as sharp as it can be ground — the usual choice for aluminium and other soft, sticky materials.

Specifications

• Cutting diameter: 5/8"
• Shank diameter: 5/8"
• Length of cut (LOC): 3/4"
• Overall length (OAL): 3-1/2"
• Flutes: 4
• End type: Single End
• Helix angle: 45°
• Cutting style: Roughing / chip-breaking
• Coating: Uncoated
• Tool material: Solid Carbide
• Series: 317
• Item number: 317-0730