5/8" OD x 5/8" Shank OD x 1-5/8" LOC x 3-1/2" OAL 5-Flute SE Solid Carbide Multi-Flute Tough Mill Square End 45° Helix CC Bright (Uncoated) — HTC Mfg.
5/8" End Mill Single End Square. Tough Mill. Flute Lenght 1-5/8" OAL 3-1/2" - 5 Flutes Uncoated
5/8" OD x 5/8" Shank OD x 1-5/8" LOC x 3-1/2" OAL 5-Flute SE Solid Carbide Multi-Flute Tough Mill Square End 45° Helix CC Bright (Uncoated) — HTC Mfg.
5/8" End Mill Single End Square. Tough Mill. Flute Lenght 1-5/8" OAL 3-1/2" - 5 Flutes Uncoated

5/8" OD x 5/8" Shank OD x 1-5/8" LOC x 3-1/2" OAL 5-Flute SE Solid Carbide Multi-Flute Tough Mill Square End 45° Helix CC Bright (Uncoated) EDP #92632

Solid Carbide Multi-Flute End Mill
$93.42 each
Item #
Quantity
- +

5/8" OD x 5/8" Shank OD x 1-5/8" LOC x 3-1/2" OAL 5-Flute Single End Solid Carbide Multi-Flute Tough Mill, Square End, 45° Helix, Center Cutting, Bright Finish (Uncoated).

This multi-flute Tough Mill is designed for stable peripheral finish milling. Its high flute count and 45° helix support smooth cutting action, reduced deflection, and productive finishing passes when the setup and work material are suitable. The square-end profile is suited to side milling, shoulders, pockets, and flat-bottom features.

The bright, uncoated cutting edge is suitable for finish milling where an added coating is not required.

Specifications

  • Cutting diameter: 5/8"
  • Shank diameter: 5/8"
  • Length of cut (LOC): 1-5/8"
  • Overall length (OAL): 3-1/2"
  • Flutes: 5
  • End type: Single End
  • End geometry: Square End
  • Tool family: Multi-Flute Tough Mill
  • Corner radius: None specified
  • Helix angle: 45°
  • Center cutting: Yes
  • Coating: Bright Finish (Uncoated)
  • Tool material: Solid Carbide
  • Series: 400
  • EDP number: 92632
  • Item number: 400-2632

Availability and Shipping

For HTC carbide tools, if the uncoated tool is available and coating is needed, estimated time to ship is 3–4 business days. If the tool is not in stock, estimated time to ship is 7–10 calendar days. For items that require manufacturing, contact us for a confirmed estimated ship date.

Unless stated otherwise, estimated time to ship is measured in calendar days, from order placement until your order is handed to the carrier. Carrier transit time is additional. Orders may ship sooner. We accept orders awaiting replenishment; please contact us before ordering if you need a specific shipping date.

See our Shipping Policy for details.

Recently viewed

Dial In Your Cut

Free TechTips resources for end mill users — machinist tested.

Speeds & Feeds CalculatorsThe right RPM and feed rate for your end mill, material and setup.Open calculator → Chip Load (FPT) CalculatorFeed per tooth keeps carbide cutting instead of rubbing — with chip thinning compensation.Open calculator → MRR CalculatorHow hard your end mill is really working, and where your cycle time goes.Open calculator →

More help: Milling TechTips · Troubleshooting · Carbide vs. HSS Guide