1/4" Profiling End Mill; Ball Nose; Shank OD 3/8" Flute Length 1/2"; OAL 4" - 2 Flutes AlTiN Coat
1/4" Profiling End Mill; Ball Nose; Shank OD 3/8" Flute Length 1/2"; OAL 4" - 2 Flutes AlTiN Coat
1/4" Profiling End Mill; Ball Nose; Shank OD 3/8" Flute Length 1/2"; OAL 4" - 2 Flutes AlTiN Coat
1/4" Profiling End Mill; Ball Nose; Shank OD 3/8" Flute Length 1/2"; OAL 4" - 2 Flutes AlTiN Coat
1/4" Profiling End Mill; Ball Nose; Shank OD 3/8" Flute Length 1/2"; OAL 4" - 2 Flutes AlTiN Coat
1/4" Profiling End Mill; Ball Nose; Shank OD 3/8" Flute Length 1/2"; OAL 4" - 2 Flutes AlTiN Coat
1/4" Profiling End Mill; Ball Nose; Shank OD 3/8" Flute Length 1/2"; OAL 4" - 2 Flutes AlTiN Coat
1/4" Profiling End Mill; Ball Nose; Shank OD 3/8" Flute Length 1/2"; OAL 4" - 2 Flutes AlTiN Coat
1/4" Profiling End Mill; Ball Nose; Shank OD 3/8" Flute Length 1/2"; OAL 4" - 2 Flutes AlTiN Coat
1/4" Profiling End Mill; Ball Nose; Shank OD 3/8" Flute Length 1/2"; OAL 4" - 2 Flutes AlTiN Coat
1/4" Profiling End Mill; Ball Nose; Shank OD 3/8" Flute Length 1/2"; OAL 4" - 2 Flutes AlTiN Coat
1/4" Profiling End Mill; Ball Nose; Shank OD 3/8" Flute Length 1/2"; OAL 4" - 2 Flutes AlTiN Coat
1/4" Profiling End Mill; Ball Nose; Shank OD 3/8" Flute Length 1/2"; OAL 4" - 2 Flutes AlTiN Coat
1/4" Profiling End Mill; Ball Nose; Shank OD 3/8" Flute Length 1/2"; OAL 4" - 2 Flutes AlTiN Coat

1/4" Profiling End Mill; Ball Nose; Shank OD 3/8" Flute Length 1/2"; OAL 4" - 2 Flutes AlTiN Coat

End Mill
$45.49 each
Item #
Series
Coating
Quantity
- +

1/4" Solid Carbide Profiling End Mill; Ball Nose; Shank OD 3/8" Flute Length 1/2"; OAL 4" - 2 Flutes AlTiN Coat

Recently viewed

Dial In Your Cut

Free TechTips resources for end mill users — machinist tested.

Speeds & Feeds CalculatorsThe right RPM and feed rate for your end mill, material and setup.Open calculator → Chip Load (FPT) CalculatorFeed per tooth keeps carbide cutting instead of rubbing — with chip thinning compensation.Open calculator → MRR CalculatorHow hard your end mill is really working, and where your cycle time goes.Open calculator →

More help: Milling TechTips · Troubleshooting · Carbide vs. HSS Guide