7mm End Mill Standard Length. Single End Square. Shank OD 8mm Flute Length 19mm OAL 63mm - 3 Flutes - Uncoated — HTC Mfg.
7mm End Mill Standard Length. Single End Square. Shank OD 8mm Flute Length 19mm OAL 63mm - 3 Flutes - Uncoated
7mm End Mill Standard Length. Single End Square. Shank OD 8mm Flute Length 19mm OAL 63mm - 3 Flutes - Uncoated
7mm End Mill Standard Length. Single End Square. Shank OD 8mm Flute Length 19mm OAL 63mm - 3 Flutes - Uncoated
7mm End Mill Standard Length. Single End Square. Shank OD 8mm Flute Length 19mm OAL 63mm - 3 Flutes - Uncoated
7mm End Mill Standard Length. Single End Square. Shank OD 8mm Flute Length 19mm OAL 63mm - 3 Flutes - Uncoated
7mm End Mill Standard Length. Single End Square. Shank OD 8mm Flute Length 19mm OAL 63mm - 3 Flutes - Uncoated
7mm End Mill Standard Length. Single End Square. Shank OD 8mm Flute Length 19mm OAL 63mm - 3 Flutes - Uncoated
7mm End Mill Standard Length. Single End Square. Shank OD 8mm Flute Length 19mm OAL 63mm - 3 Flutes - Uncoated
7mm End Mill Standard Length. Single End Square. Shank OD 8mm Flute Length 19mm OAL 63mm - 3 Flutes - Uncoated
7mm End Mill Standard Length. Single End Square. Shank OD 8mm Flute Length 19mm OAL 63mm - 3 Flutes - Uncoated
7mm End Mill Standard Length. Single End Square. Shank OD 8mm Flute Length 19mm OAL 63mm - 3 Flutes - Uncoated
7mm End Mill Standard Length. Single End Square. Shank OD 8mm Flute Length 19mm OAL 63mm - 3 Flutes - Uncoated
7mm End Mill Standard Length. Single End Square. Shank OD 8mm Flute Length 19mm OAL 63mm - 3 Flutes - Uncoated
7mm End Mill Standard Length. Single End Square. Shank OD 8mm Flute Length 19mm OAL 63mm - 3 Flutes - Uncoated
7mm End Mill Standard Length. Single End Square. Shank OD 8mm Flute Length 19mm OAL 63mm - 3 Flutes - Uncoated — HTC Mfg.
7mm End Mill Standard Length. Single End Square. Shank OD 8mm Flute Length 19mm OAL 63mm - 3 Flutes - Uncoated
7mm End Mill Standard Length. Single End Square. Shank OD 8mm Flute Length 19mm OAL 63mm - 3 Flutes - Uncoated
7mm End Mill Standard Length. Single End Square. Shank OD 8mm Flute Length 19mm OAL 63mm - 3 Flutes - Uncoated
7mm End Mill Standard Length. Single End Square. Shank OD 8mm Flute Length 19mm OAL 63mm - 3 Flutes - Uncoated
7mm End Mill Standard Length. Single End Square. Shank OD 8mm Flute Length 19mm OAL 63mm - 3 Flutes - Uncoated
7mm End Mill Standard Length. Single End Square. Shank OD 8mm Flute Length 19mm OAL 63mm - 3 Flutes - Uncoated
7mm End Mill Standard Length. Single End Square. Shank OD 8mm Flute Length 19mm OAL 63mm - 3 Flutes - Uncoated
7mm End Mill Standard Length. Single End Square. Shank OD 8mm Flute Length 19mm OAL 63mm - 3 Flutes - Uncoated
7mm End Mill Standard Length. Single End Square. Shank OD 8mm Flute Length 19mm OAL 63mm - 3 Flutes - Uncoated
7mm End Mill Standard Length. Single End Square. Shank OD 8mm Flute Length 19mm OAL 63mm - 3 Flutes - Uncoated
7mm End Mill Standard Length. Single End Square. Shank OD 8mm Flute Length 19mm OAL 63mm - 3 Flutes - Uncoated
7mm End Mill Standard Length. Single End Square. Shank OD 8mm Flute Length 19mm OAL 63mm - 3 Flutes - Uncoated
7mm End Mill Standard Length. Single End Square. Shank OD 8mm Flute Length 19mm OAL 63mm - 3 Flutes - Uncoated
7mm End Mill Standard Length. Single End Square. Shank OD 8mm Flute Length 19mm OAL 63mm - 3 Flutes - Uncoated

7mm End Mill Standard Length. Single End Square. Shank OD 8mm Flute Length 19mm OAL 63mm - 3 Flutes - Uncoated

End Mill
$13.08 each
Item #
Series
Coating
Quantity
- +

7mm cutting diameter, 3 flutes, single end, square end, standard length, uncoated.

This tool cuts 7mm diameter, runs a 8mm shank, has 19mm of flute and measures 63mm overall.

The square end cuts a flat floor with a sharp corner — slots, pockets, shoulders and side milling.

Standard length — the general-purpose proportion for most milling.

Uncoated, so the edge stays as sharp as it can be ground — the usual choice for aluminium and other soft, sticky materials.

Specifications

  • Cutting diameter: 7mm
  • Shank diameter: 8mm
  • Length of cut (LOC): 19mm
  • Overall length (OAL): 63mm
  • Flutes: 3
  • End type: Single End
  • End geometry: Square End
  • Length style: Standard
  • Coating: Uncoated
  • Series: 950
  • Item number: 950-3275

Recently viewed

Dial In Your Cut

Free TechTips resources for end mill users — machinist tested.

Speeds & Feeds CalculatorsThe right RPM and feed rate for your end mill, material and setup.Open calculator → Chip Load (FPT) CalculatorFeed per tooth keeps carbide cutting instead of rubbing — with chip thinning compensation.Open calculator → MRR CalculatorHow hard your end mill is really working, and where your cycle time goes.Open calculator →

More help: Milling TechTips · Troubleshooting · Carbide vs. HSS Guide