3/4" Spoon Cutter - Ball End. Single End with 35 Degree Helix. Shank OD 3/4" - LOC 1" - OAL 4" - 3 Flutes for Stainless Steel machining. AlTiN Coated

3/4" Spoon Cutter, ball end, single end, 35° helix, 3 flutes, AlTiN coated.

A spoon cutter is a single-end mill with a gashed, spoon-shaped end. This one is ground from solid carbide with a full-radius ball nose, and cuts 3/4" diameter on a 3/4" shank, with 1" of flute and 4" overall.

Where the rest of the spoon cutter line runs a 45° helix for aluminum, this series runs 35° with a third flute. The lower helix angle puts more steel behind the cutting edge and the extra flute spreads the load — the combination HTC specifies for stainless steel.

The AlTiN coating forms an aluminum-oxide layer under heat, which is what lets it hold up in the high temperatures stainless generates at the edge.

Specifications

• Cutting diameter: 3/4"
• Shank diameter: 3/4"
• Length of cut (LOC): 1"
• Overall length (OAL): 4"
• Flutes: 3
• End type: Single End
• Nose: Ball End
• Helix angle: 35°
• Coating: AlTiN
• Tool material: Solid Carbide
• Intended for: Stainless steel machining
• Series: 414
• Item number: 99007