1/8" Spoon Cutter - Ball End. Single End with 35 Degree Helix. Shank OD 1/8" - LOC 1/2" - OAL 1-1/2" - 3 Flutes for Stainless Steel machining. AlTiN Coated

1/8" Spoon Cutter, ball end, single end, 35° helix, 3 flutes, AlTiN coated.

A spoon cutter is a single-end mill with a gashed, spoon-shaped end. This one is ground from solid carbide with a full-radius ball nose, and cuts 1/8" diameter on a 1/8" shank, with 1/2" of flute and 1-1/2" overall.

Where the rest of the spoon cutter line runs a 45° helix for aluminum, this series runs 35° with a third flute. The lower helix angle puts more steel behind the cutting edge and the extra flute spreads the load — the combination HTC specifies for stainless steel.

The AlTiN coating forms an aluminum-oxide layer under heat, which is what lets it hold up in the high temperatures stainless generates at the edge.

Specifications

• Cutting diameter: 1/8"
• Shank diameter: 1/8"
• Length of cut (LOC): 1/2"
• Overall length (OAL): 1-1/2"
• Flutes: 3
• End type: Single End
• Nose: Ball End
• Helix angle: 35°
• Coating: AlTiN
• Tool material: Solid Carbide
• Intended for: Stainless steel machining
• Series: 414
• Item number: 99009