DNMG 150604 / DNMG 441, chip breaker BF, grade FM324 — negative 55° rhombic turning insert.
1/2" inscribed circle, 1/4" thick, 1/64" corner radius. The BF breaker is the finishing geometry: 0.002–0.010 ipr (0.05–0.25 mm/rev) at 0.02–0.06" (0.5–1.5 mm) depth of cut. FM324 is a PVD grade — universal multi-purpose grade for mid and low cutting speeds — low-carbon and alloyed steel, stainless, cast iron, Inconel and titanium alloys.
Specifications
-
Insert designation (ISO): DNMG 150604
-
Insert designation (inch): DNMG 441
-
Insert shape: 55° rhombic (D)
-
Clearance angle: 0° — negative (N)
-
Tolerance class: M
-
Insert type: G — with hole, chipbreaker both sides
-
Inscribed circle (I.C.): 1/2" (12.7 mm)
-
Thickness: 1/4" (6.35 mm)
-
Corner radius: 1/64" (0.4 mm)
-
Chip breaker: BF — Steel — finishing
-
Feed rate range: 0.002–0.010 ipr (0.05–0.25 mm/rev)
-
Depth of cut range: 0.02–0.06" (0.5–1.5 mm)
-
Grade: FM324
-
Coating: PVD
-
ISO application range: P10–P30 · M05–M25 · S05–S25 · H20–H40
-
Cutting speed, non-alloy steel: 390–820 SFM (120–250 m/min)
-
Cutting speed, low-alloy steel: 230–750 SFM (70–230 m/min)
-
Cutting speed, high-alloy steel: 230–590 SFM (70–180 m/min)
-
Cutting speed, ferritic & martensitic stainless: 200–590 SFM (60–180 m/min)
-
Cutting speed, austenitic stainless: 200–490 SFM (60–150 m/min)
-
Cutting speed, grey cast iron: 200–520 SFM (60–160 m/min)
-
Cutting speed, nodular cast iron: 200–390 SFM (60–120 m/min)
-
Cutting speed, titanium & super-alloys: 110–200 SFM (35–60 m/min)
-
Cutting speed, hardened material: 130–260 SFM (40–80 m/min)
Grade & chip breaker selection chart →
Turning insert designations explained · Using a turning formula calculator
