KU-2-DU-12 Plastic Nozzle Straight Ø12 mm — Hirt Line 1/2" System
KU-2-DU-12 FM Carbide technical drawing with metric and U.S. dimensions
KU-2-DU-12 Plastic Nozzle Straight Ø12 mm — Hirt Line 1/2" System
KU-2-DU-12 FM Carbide technical drawing with metric and U.S. dimensions

KU-2-DU-12 Plastic Nozzle Straight Ø12 mm — Hirt Line 1/2" System

Nozzles
$20.49 each

KU-2-DU-12 Plastic Straight Round Nozzle provides a straight round coolant stream through its Ø12.0 mm / 0.472 in.

Use it where a concentrated stream is needed at a turning, milling or grinding interface. The mechanically sealed Typ2 joint allows precise aiming without elastomer sealing rings.

Technical Specifications

Part number KU-2-DU-12
Product type Plastic Straight Round Nozzle
System Hirt-Line Typ2 (1/2-inch system)
System connection M24×1.25 nut
System flow size 11 mm / 0.433 in
Outlet geometry Ø12.0 mm / 0.472 in outlet
Stream pattern Targeted straight stream
Overall length 33 mm / 1.299 in
Effective installation length 27 mm / 1.063 in
Body outside diameter Ø15.2 mm / Ø0.598 in
Wrench size SW27 nut
Material POM-C nozzle body with 1.4305 stainless steel (AISI 303) nut
Temperature range −10 °C to +100 °C / +14 °F to +212 °F
Maximum pressure 70 bar / 1015 psi
Weight 18 g / 0.63 oz

Selection guidance: Confirm the M24×1.25 Typ2 connection, available installation envelope and required outlet pattern before ordering. Carrier flow requirements depend on coolant viscosity, pressure and the complete line configuration.

Browse the complete Hirt-Line Typ2 coolant system or contact FM Carbide technical support for configuration assistance.

Availability and Shipping

Hirt-Line maintains substantial stock in the USA. If this item is not in stock, estimated time to ship is 7–10 calendar days.

Estimated time to ship is measured from order placement until carrier handoff. Carrier transit time is additional. Orders may ship sooner. Please contact us before ordering if you need a specific shipping date.

See our Shipping Policy for details.

Recently viewed