1/4" SA Shape Carbide Burr. Double Cut Cylinder without End Cut. LOC 5/8" Shank OD 1/4" OAL 2" - Uncoated — HTC Mfg.
1/4" SA Shape Carbide Burr. Double Cut Cylinder without End Cut. LOC 5/8" Shank OD 1/4" OAL 2" - Uncoated
1/4" SA Shape Carbide Burr. Double Cut Cylinder without End Cut. LOC 5/8" Shank OD 1/4" OAL 2" - Uncoated
1/4" SA Shape Carbide Burr. Double Cut Cylinder without End Cut. LOC 5/8" Shank OD 1/4" OAL 2" - Uncoated
1/4" SA Shape Carbide Burr. Double Cut Cylinder without End Cut. LOC 5/8" Shank OD 1/4" OAL 2" - Uncoated — HTC Mfg.
1/4" SA Shape Carbide Burr. Double Cut Cylinder without End Cut. LOC 5/8" Shank OD 1/4" OAL 2" - Uncoated
1/4" SA Shape Carbide Burr. Double Cut Cylinder without End Cut. LOC 5/8" Shank OD 1/4" OAL 2" - Uncoated
1/4" SA Shape Carbide Burr. Double Cut Cylinder without End Cut. LOC 5/8" Shank OD 1/4" OAL 2" - Uncoated

1/4" SA Shape Carbide Burr. Double Cut Cylinder without End Cut. LOC 5/8" Shank OD 1/4" OAL 2" - Uncoated

Burr
$13.66 each
Item #
Quantity
- +

1/4" SA shape carbide burr, double cut, cylinder without end cut.

A rotary burr for deburring, weld dressing, shaping and blending in a die grinder or air tool. This one cuts 1/4" diameter with 5/8" of cut on a 1/4" shank, 2" overall.

The double cut crosses two rows of flutes, which breaks the chip up small, keeps the tool from grabbing and leaves a smoother finish with less vibration.

Specifications

  • Head diameter: 1/4"
  • Head shape: SA — Cylinder without End Cut
  • Cut: Double cut
  • Length of cut (LOC): 5/8"
  • Shank diameter: 1/4"
  • Overall length (OAL): 2"
  • Coating: Uncoated
  • Tool material: Solid Carbide
  • Series: SA
  • Item number: SA-1 DC

Recently viewed