Search results

MSRNR248E Tool Holder 75° Lead Angle SNM 85 Insert

$128.90 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MSRNL248E Tool Holder 75° Lead Angle SNM 85 Insert

$128.90 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MSDNN 85-5D Tool Holder 45 Side Cutting Edge Angle for Negative Square SNM_Inserts

$92.32 each

MSDNN 85-5D — toolholder, 1.000" × 1.250" shank (width × height), 6.0" overall length. Made in the USA by RMC Tooling. 45° Side Cutting Edge Angle for Negative Square SNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference...

MSSNR 85-5DTool Holder 45 Side Cutting Edge Angle for Negative Square SNM_Inserts

$102.61 each

MSSNR 85-5D — toolholder, 1.00" × 1.25" shank (width × height), 6.0" overall length. Made in the USA by RMC Tooling. 45° Side Cutting Edge Angle for Negative Square SNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference...

MSDNN 85-4D Tool Holder 45 Side Cutting Edge Angle for Negative Square SNM_Inserts

$92.32 each

MSDNN 85-4D — toolholder, 1.000" × 1.250" shank (width × height), 6.0" overall length. Made in the USA by RMC Tooling. 45° Side Cutting Edge Angle for Negative Square SNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference...

MSSNR 85-4DTool Holder 45 Side Cutting Edge Angle for Negative Square SNM_Inserts

$120.20 each

MSSNR 85-4D — toolholder, 1.00" × 1.25" shank (width × height), 6.0" overall length. Made in the USA by RMC Tooling. 45° Side Cutting Edge Angle for Negative Square SNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference...

MSSNL 85-4D Tool Holder 45 Side Cutting Edge Angle for Negative Square SNM_Inserts

$120.20 each

MSSNL 85-4D — toolholder, 1.00" × 1.25" shank (width × height), 6.0" overall length. Made in the USA by RMC Tooling. 45° Side Cutting Edge Angle for Negative Square SNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference...

MSSNL 85-5D Tool Holder 45 Side Cutting Edge Angle for Negative Square SNM_Inserts

$93.28 each

MSSNL 85-5D — toolholder, 1.00" × 1.25" shank (width × height), 6.0" overall length. Made in the USA by RMC Tooling. 45° Side Cutting Edge Angle for Negative Square SNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference...

MSRNR 85-5D Tool Holder 15 Side Cutting Edge Angle for Negative Square SNM_Inserts

$92.32 each

MSRNR 85-5D — toolholder, 1.000" × 1.250" shank (width × height), 6.0" overall length. Made in the USA by RMC Tooling. 15° Side Cutting Edge Angle for Negative Square SNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference...

MSKNR 85-5D Tool Holder 15 End Cutting Edge Angle for Negative Square SNM_Inserts

$95.20 each

MSKNR 85-5D — toolholder, 1.000" × 1.250" shank (width × height), 6.0" overall length. Made in the USA by RMC Tooling. 15° End Cutting Edge Angle for Negative Square SNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference...

MSRNL 85-5D Tool Holder 15 Side Cutting Edge Angle for Negative Square SNM_Inserts

$92.32 each

MSRNL 85-5D — toolholder, 1.000" × 1.250" shank (width × height), 6.0" overall length. Made in the USA by RMC Tooling. 15° Side Cutting Edge Angle for Negative Square SNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference...

MSRNL 85-4D Tool Holder 15 Side Cutting Edge Angle for Negative Square SNM_Inserts

$102.61 each

MSRNL 85-4D — toolholder, 1.000" × 1.250" shank (width × height), 6.0" overall length. Made in the USA by RMC Tooling. 15° Side Cutting Edge Angle for Negative Square SNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference...

MSKNL 85-4D Tool Holder 15 End Cutting Edge Angle for Negative Square SNM_Inserts

$92.32 each

MSKNL 85-4D — toolholder, 1.000" × 1.250" shank (width × height), 6.0" overall length. Made in the USA by RMC Tooling. 15° End Cutting Edge Angle for Negative Square SNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference...

MSRNR 85-6D Tool Holder 15 Side Cutting Edge Angle for Negative Square SNM_Inserts

$92.32 each

MSRNR 85-6D — toolholder, 1.000" × 1.250" shank (width × height), 6.0" overall length. Made in the USA by RMC Tooling. 15° Side Cutting Edge Angle for Negative Square SNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference...

MSDNN 85-6D Tool Holder 45 Side Cutting Edge Angle for Negative Square SNM_Inserts

$102.61 each

MSDNN 85-6D — toolholder, 1.000" × 1.250" shank (width × height), 6.0" overall length. Made in the USA by RMC Tooling. 45° Side Cutting Edge Angle for Negative Square SNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference...

MSRNR 85-4D Tool Holder 15 Side Cutting Edge Angle for Negative Square SNM_Inserts

$102.61 each

MSRNR 85-4D — toolholder, 1.000" × 1.250" shank (width × height), 6.0" overall length. Made in the USA by RMC Tooling. 15° Side Cutting Edge Angle for Negative Square SNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference...

MSRNL 85-6D Tool Holder 15 Side Cutting Edge Angle for Negative Square SNM_Inserts

$92.32 each

MSRNL 85-6D — toolholder, 1.000" × 1.250" shank (width × height), 6.0" overall length. Made in the USA by RMC Tooling. 15° Side Cutting Edge Angle for Negative Square SNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference...

PSC80-PSDNN00080-25 PSC Modular Toolholder, 45° Lead Angle, Neutral Hand

$367.75 each

Canela reference PSC80-PSDNN00080-25 — PSC modular toolholder, neutral hand. Toolholder for external turning and chamfering applications equipped with square negative inserts. PSC with internal coolant. The PSC polygonal shank coupling (ISO 26623-1) clamps from inside, so the head changes in seconds and repeats to the micron.Specifications Reference: PSC80-PSDNN00080-25 Coupling: PSC...

MSKNR 85-4D Tool Holder 15 End Cutting Edge Angle for Negative Square SNM_Inserts

$77.44 each

MSKNR 85-4D — toolholder, 1.000" × 1.250" shank (width × height), 6.0" overall length. Made in the USA by RMC Tooling. 15° End Cutting Edge Angle for Negative Square SNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference...

PSC63-PSDNN00065-25 PSC Modular Toolholder, 45° Lead Angle, Neutral Hand

$339.10 each

Canela reference PSC63-PSDNN00065-25 — PSC modular toolholder, neutral hand. Toolholder for external turning and chamfering applications equipped with square negative inserts. PSC with internal coolant. The PSC polygonal shank coupling (ISO 26623-1) clamps from inside, so the head changes in seconds and repeats to the micron.Specifications Reference: PSC63-PSDNN00065-25 Coupling: PSC...

MSKNL 85-5D Tool Holder 15 End Cutting Edge Angle for Negative Square SNM_Inserts

$92.32 each

MSKNL 85-5D — toolholder, 1.000" × 1.250" shank (width × height), 6.0" overall length. Made in the USA by RMC Tooling. 15° End Cutting Edge Angle for Negative Square SNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference...

MSYNL10CA-3C Cartridge 85° Lead Angle SNMG 32 Insert

$154.92 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSYNL10CA-3C Dimension D: 1.575" Length (L): 1.969" Length (L1): 1.181" Width (b): 0.433" Dimension...

MSYNR10CA-3C Cartridge 85° Lead Angle SNMG 32 Insert

$154.92 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSYNR10CA-3C Dimension D: 1.575" Length (L): 1.969" Length (L1): 1.181" Width (b): 0.433" Dimension...

MSYNR16CA-4C Cartridge 85° Lead Angle SNMG 43 Insert

$154.92 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSYNR16CA-4C Dimension D: 2.362" Length (L): 2.480" Length (L1): 1.497" Width (b): 0.787" Dimension...

MSYNL16CA-4C Cartridge 85° Lead Angle SNMG 43 Insert

$154.92 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSYNL16CA-4C Dimension D: 2.362" Length (L): 2.480" Length (L1): 1.497" Width (b): 0.787" Dimension...

MSYNR12CA-4C Cartridge 85° Lead Angle SNMG 43 Insert

$154.92 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSYNR12CA-4C Dimension D: 1.969" Length (L): 2.165" Length (L1): 1.378" Width (b): 0.630" Dimension...

MSYNL12CA-4C Cartridge 85° Lead Angle SNMG 43 Insert

$154.92 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSYNL12CA-4C Dimension D: 1.969" Length (L): 2.165" Length (L1): 1.378" Width (b): 0.630" Dimension...

MSYNR20CA-5C Cartridge 85° Lead Angle SNMG 54 Insert

$169.47 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSYNR20CA-5C Dimension D: 2.756" Length (L): 2.756" Length (L1): 1.575" Width (b): 0.787" Dimension...

MSYNL20CA-5C Cartridge 85° Lead Angle SNMG 54 Insert

$169.47 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSYNL20CA-5C Dimension D: 2.756" Length (L): 2.756" Length (L1): 1.575" Width (b): 0.787" Dimension...

SNMM 856 Turning Insert, 0.094" Corner Radius, Grade TN30

$49.76 each

10 inserts per box

Canela reference SNMM856 — square turning insert, grade TN30. Original Canela indexable insert, 1.000" cutting edge and 0.094" corner radius. Sold individually, no minimum order.Specifications Reference: SNMM856 Insert shape: square (S) Clearance angle: 0° Cutting edge length (l): 1.000" Thickness (T): 0.312" Inscribed circle (d): 1.000" Corner radius (r): 0.094"...

PSC80-PSKNR55080-25 PSC Modular Toolholder, 75° Lead Angle, Right Hand

$367.75 each

Canela reference PSC80-PSKNR55080-25 — PSC modular toolholder, right hand. Toolholder for face turning applications equipped with square negative inserts. PSC with internal coolant. The PSC polygonal shank coupling (ISO 26623-1) clamps from inside, so the head changes in seconds and repeats to the micron.Specifications Reference: PSC80-PSKNR55080-25 Coupling: PSC 80 (ISO...

PSC80-PSRNR45080-25 PSC Modular Toolholder, 75° Lead Angle, Right Hand

$367.75 each

Canela reference PSC80-PSRNR45080-25 — PSC modular toolholder, right hand. Toolholder for face turning applications equipped with square negative inserts. PSC with internal coolant. The PSC polygonal shank coupling (ISO 26623-1) clamps from inside, so the head changes in seconds and repeats to the micron.Specifications Reference: PSC80-PSRNR45080-25 Coupling: PSC 80 (ISO...

PSC80-PSSNL55070-25 PSC Modular Toolholder, 45° Lead Angle, Left Hand

$367.75 each

Canela reference PSC80-PSSNL55070-25 — PSC modular toolholder, left hand. Toolholder for external turning and chamfering applications equipped with square negative inserts. PSC with internal coolant. The PSC polygonal shank coupling (ISO 26623-1) clamps from inside, so the head changes in seconds and repeats to the micron.Specifications Reference: PSC80-PSSNL55070-25 Coupling: PSC...

PSC80-PSRNL45080-25 PSC Modular Toolholder, 75° Lead Angle, Left Hand

$367.75 each

Canela reference PSC80-PSRNL45080-25 — PSC modular toolholder, left hand. Toolholder for face turning applications equipped with square negative inserts. PSC with internal coolant. The PSC polygonal shank coupling (ISO 26623-1) clamps from inside, so the head changes in seconds and repeats to the micron.Specifications Reference: PSC80-PSRNL45080-25 Coupling: PSC 80 (ISO...

PSC80-PSKNL55080-25 PSC Modular Toolholder, 75° Lead Angle, Left Hand

$367.75 each

Canela reference PSC80-PSKNL55080-25 — PSC modular toolholder, left hand. Toolholder for face turning applications equipped with square negative inserts. PSC with internal coolant. The PSC polygonal shank coupling (ISO 26623-1) clamps from inside, so the head changes in seconds and repeats to the micron.Specifications Reference: PSC80-PSKNL55080-25 Coupling: PSC 80 (ISO...

PSC80-PSSNR55070-25 PSC Modular Toolholder, 45° Lead Angle, Right Hand

$367.75 each

Canela reference PSC80-PSSNR55070-25 — PSC modular toolholder, right hand. Toolholder for external turning and chamfering applications equipped with square negative inserts. PSC with internal coolant. The PSC polygonal shank coupling (ISO 26623-1) clamps from inside, so the head changes in seconds and repeats to the micron.Specifications Reference: PSC80-PSSNR55070-25 Coupling: PSC...

SNMG 431 CHIP BREAKER FMC GRADE TN15 / SNMG 120404 FMC TN15

$9.76 each

10 inserts per box

Canela reference SNMG431-FMC — square (S) turning insert, grade TN15. Original Canela indexable insert and 1/64" (0.4 mm) corner radius. Sold individually, no minimum order.Specifications Reference: SNMG431-FMC ISO designation: SNMG 120404 Insert shape: square (S) Clearance angle: 0° — negative (N) Chipbreaker: FMC Thickness (T): 3/16" (4.76 mm) Inscribed circle...

MSDNN 86-5D Tool Holder 45 Side Cutting Edge Angle for Negative Square SNM_Inserts

$102.61 each

MSDNN 86-5D — toolholder, 1.000" × 1.500" shank (width × height), 6.0" overall length. Made in the USA by RMC Tooling. 45° Side Cutting Edge Angle for Negative Square SNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference...

ISSN-846 Square Shim Seat — 0.998" × 0.251" thick

$26.55 each

Canela reference ISSN-846 — square shim seat. Original carbide shim seat for Canela indexable turning toolholders. The seat takes the cutting load and protects the pocket, so a chipped insert does not scrap the tool. Sold individually, no minimum order.Specifications Reference: ISSN-846 Part type: Square Shim Seat Thickness (b): 0.251"...

MSDNN855D Tool Holder 45° Lead Angle SNM 54 Insert

$103.97 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

SIMSKNL 32-6 15° End Cutting Edge Angle for Negative Square SNM_ Inserts

$432.70 each

SIMSKNL 32-6 — boring bar, 2.00" bar diameter, 2.400" minimum bore, 16.0" overall length. Made in the USA by RMC Tooling. 15° End Cutting Edge Angle for Negative Square SNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a...

SNMG 120408 Chip Breaker BR Grade FM2553 / SNMG 432 BR #FMCarbide

$7.80 each

10 inserts per box

SNMG 120408 / SNMG 432, chip breaker BR, grade FM2553 — negative square turning insert.1/2" inscribed circle, 3/16" thick, 1/32" corner radius. The BR breaker is the roughing geometry: 0.012–0.024 ipr (0.3–0.6 mm/rev) at 0.08–0.24" (2–6 mm) depth of cut. FM2553 is a CVD (Al₂O₃) grade — tough substrate for...

PSKNL16CA-12 Cartridge 75° Lead Angle SNMG 43 Insert

$184.03 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: PSKNL16CA-12 Dimension D: 2.362" Length (L): 2.480" Length (L1): 1.496" Width (b): 0.787" Dimension...

SNMG 120408 Chip Breaker BG Grade FM2553 / SNMG 432 BG #FMCarbide

$8.21 each

10 inserts per box

SNMG 120408 / SNMG 432, chip breaker BG, grade FM2553 — negative square turning insert.1/2" inscribed circle, 3/16" thick, 1/32" corner radius. The BG breaker is the medium machining geometry: 0.008–0.016 ipr (0.2–0.4 mm/rev) at 0.06–0.16" (1.5–4 mm) depth of cut. FM2553 is a CVD (Al₂O₃) grade — tough substrate...

SIMSKNL 32-5 15° End Cutting Edge Angle for Negative Square SNM_ Inserts

$375.00 each

SIMSKNL 32-5 — boring bar, 2.00" bar diameter, 2.562" minimum bore, 16.0" overall length. Made in the USA by RMC Tooling. 15° End Cutting Edge Angle for Negative Square SNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a...

SIMSKNL 28-4 15° End Cutting Edge Angle for Negative Square SNM_ Inserts

$346.17 each

SIMSKNL 28-4 — boring bar, 1.75" bar diameter, 2.010" minimum bore, 14.0" overall length. Made in the USA by RMC Tooling. 15° End Cutting Edge Angle for Negative Square SNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a...

MSDNN 86-5E Tool Holder 45 Side Cutting Edge Angle for Negative Square SNM_Inserts

$102.61 each

MSDNN 86-5E — toolholder, 1.000" × 1.500" shank (width × height), 7.0" overall length. Made in the USA by RMC Tooling. 45° Side Cutting Edge Angle for Negative Square SNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference...

MSRNR16CA-4C Cartridge 75° Lead Angle SNMG 43 Insert

$154.92 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSRNR16CA-4C Dimension D: 2.362" Length (L): 2.480" Length (L1): 1.497" Width (b): 0.787" Dimension...

PSSNL12CA-12 Cartridge 45° Lead Angle SNMG 43 Insert

$184.03 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: PSSNL12CA-12 Dimension D: 1.969" Length (L): 1.850" Length (L1): 1.063" Width (b): 0.630" Dimension...

PSSNL16CA-12 Cartridge 45° Lead Angle SNMG 43 Insert

$184.03 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: PSSNL16CA-12 Dimension D: 2.362" Length (L): 2.087" Length (L1): 1.102" Width (b): 0.787" Dimension...