Search results for "tnma 43ngl"

DWLNR244EN Tool Holder — Canela, FM Carbide

DWLNL204DAN Tool Holder 95° Lead Angle WNMG 43 Insert

$137.81

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
S24U-DCLNR4N Boring Bar — Canela, FM Carbide

DCLNL204DAN Tool Holder 95° Lead Angle CN 43 Insert

$137.81

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
DDJNR244EN Tool Holder — Canela, FM Carbide

DDJNL164DAN Tool Holder 93° Lead Angle DN 43 Insert

$187.20

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
MSKN toolholder - Canela, FM Carbide

MSKNL124B Tool Holder 75° Lead Angle SNM 43 Insert

$74.32

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
MCMNN854D Tool Holder — Canela, FM Carbide

MCMNN854D Tool Holder 50° Lead Angle CN 43 Insert

$103.97

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
Canela TNGA331 ceramic turning insert, triangular negative insert

TNGA331 Ceramic Turning Insert, Triangular Negative, 0.016" Radius, Grade CC7

$15.33

Canela reference TNGA331 — ceramic turning insert, grade CC7. Original Canela ceramic insert. Sold individually, no minimum order.Specifications Reference: TNGA331 Insert shape: Triangular negative insert Cutting edge length (l): 0.650" Thickness (T): 0.187" Inscribed circle (d): 0.375" Corner radius (r): 0.016" Grade: CC7 Brand: Canela Grade CC7. Hard materials (H),...
Canela DNMG443KC 55 degree rhombic turning insert, grade TK15

DNMG 443 Turning Insert, KC Chipbreaker, 0.047" Corner Radius, Grade TK15

$15.26

Canela reference DNMG443KC — 55° rhombic turning insert, grade TK15. Original Canela indexable insert, 0.610" cutting edge and 0.047" corner radius. Sold individually, no minimum order.Specifications Reference: DNMG443KC Insert shape: 55° rhombic (D) Clearance angle: 0° Chipbreaker: KC Cutting edge length (l): 0.610" Thickness (T): 0.250" Inscribed circle (d): 0.500"...
DWLNR244EN Tool Holder — Canela, FM Carbide

DWLNR164DAN Tool Holder 95° Lead Angle WNMG 43 Insert

$125.34

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
MVJNR864D Tool Holder — Canela, FM Carbide

MVJNR854D Tool Holder 93° Lead Angle VN 43 Insert

$126.81

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
DSSNR246EN Tool Holder — Canela, FM Carbide

DSSNR164DN Tool Holder 45° Lead Angle SNM 43 Insert

$82.22

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
S24U-DCLNR4N Boring Bar — Canela, FM Carbide

DCLNR164DAN Tool Holder 95° Lead Angle CN 43 Insert

$125.34

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
S40V-MCLNL6 Boring Bar — Canela, FM Carbide

S40V-MCLNL4 Boring Bar 95° Lead Angle CN 43 Insert

$402.89

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...
DSRNR206DAN Tool Holder — Canela, FM Carbide

DSRNL124BAN Tool Holder 75° Lead Angle SNM 43 Insert

$118.06

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
S24U-DDUNR4N Boring Bar — Canela, FM Carbide

S24U-DDUNR4N Boring Bar 93° Lead Angle DN 43 Insert

$314.55

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...
S40V-MDUNL5 Boring Bar — Canela, FM Carbide

S24U-MDUNL4 Boring Bar 93° Lead Angle DN 43 Insert

$325.01

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...
Canela SNMG432TC square turning insert, grade TS20

SNMG 432 Turning Insert, TC Chipbreaker, 0.031" Corner Radius, Grade TS20

$12.74

Canela reference SNMG432TC — square turning insert, grade TS20. Original Canela indexable insert, 0.500" cutting edge and 0.031" corner radius. Sold individually, no minimum order.Specifications Reference: SNMG432TC Insert shape: square (S) Clearance angle: 0° Chipbreaker: TC Cutting edge length (l): 0.500" Thickness (T): 0.187" Inscribed circle (d): 0.500" Corner radius...
MCLN toolholder - Canela, FM Carbide

MCLNL204D Tool Holder 95° Lead Angle CN 43 Insert

$86.86

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
WCLNR246D Tool Holder — Canela, FM Carbide

WCLNL204D Tool Holder 95° Lead Angle CN 43 Insert

$86.86

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
Canela SN3 torx screw — dimensions diagram from the Canela spare-parts catalog

SN3 Torx Screw — 5-40UNC-3A, T10 key, 2.0 N·m

$5.76

Canela reference SN3 — torx screw. Original spare part for Canela indexable turning and threading tooling. Sold individually, no minimum order.Specifications Reference: SN3 Part type: Torx Screw Thread (a): 5-40UNC-3A Dimension b: 0.255" Dimension c: 0.374" Dimension d: 0.216" Angle q: 60° Wrench size: T10 Tightening torque: 2.0 N·m Brand:...
DSSNR246EN Tool Holder — Canela, FM Carbide

DSSNR124BN Tool Holder 45° Lead Angle SNM 43 Insert

$76.88

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
DWLNR244EN Tool Holder — Canela, FM Carbide

DWLNR124BN Tool Holder 95° Lead Angle WNMG 43 Insert

$76.88

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
S40V-MVUNL4 Boring Bar — Canela, FM Carbide

S40V-MVUNL4 Boring Bar 93° Lead Angle VN 43 Insert

$442.99

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...
Canela DNGA432 ceramic turning insert, 55° rhombic negative insert

DNGA432 Ceramic Turning Insert, 55° Rhombic Negative, 0.031" Radius, Grade CC7

$18.13

Canela reference DNGA432 — ceramic turning insert, grade CC7. Original Canela ceramic insert. Sold individually, no minimum order.Specifications Reference: DNGA432 Insert shape: 55° rhombic negative insert Cutting edge length (l): 0.508" Thickness (T): 0.187" Inscribed circle (d): 0.500" Corner radius (r): 0.031" Grade: CC7 Brand: Canela Grade CC7. Hard materials...
Canela DNGA433 ceramic turning insert, 55° rhombic negative insert

DNGA433 Ceramic Turning Insert, 55° Rhombic Negative, 0.047" Radius, Grade CC7

$18.13

Canela reference DNGA433 — ceramic turning insert, grade CC7. Original Canela ceramic insert. Sold individually, no minimum order.Specifications Reference: DNGA433 Insert shape: 55° rhombic negative insert Cutting edge length (l): 0.508" Thickness (T): 0.187" Inscribed circle (d): 0.500" Corner radius (r): 0.047" Grade: CC7 Brand: Canela Grade CC7. Hard materials...
MDJNR855D Tool Holder — Canela, FM Carbide

MDJNR164D Tool Holder 93° Lead Angle DN 43 Insert

$117.45

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
MDJNR855D Tool Holder — Canela, FM Carbide

MDJNR854D Tool Holder 93° Lead Angle DN 43 Insert

$140.83

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
Canela STCNL2054 left hand vertical threading tool holder

STCNL2054 Vertical Threading Tool Holder, Left Hand, 1.34" Shank, TNMC/TPMC-54 Inserts

$110.71

Canela reference STCNL2054 — left hand vertical threading tool holder. Vertical on edge threading toolholder.Specifications Reference: STCNL2054 Hand of tool: Left hand Shank height (A): 1.25" Shank width (B): 1.25" Overall length (C): 7.00" Dimension D: 1.34" Dimension F: 1.50" Dimension H: 0.30" Dimension V: 1.375" Insert size: TNMC/TPMC-54 Tightening...
DWLNR244EN Tool Holder — Canela, FM Carbide

DWLNL204DN Tool Holder 95° Lead Angle WNMG 43 Insert

$89.96

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
DWLNR244EN Tool Holder — Canela, FM Carbide

DWLNR204DN Tool Holder 95° Lead Angle WNMG 43 Insert

$89.96

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
S40V-MDUNR5 Boring Bar — Canela, FM Carbide

A32V-MDUNR4 Boring Bar 93° Lead Angle DN 43 Insert

$386.79

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...
S40V-MVUNL4 Boring Bar — Canela, FM Carbide

S32V-MVUNL4 Boring Bar 93° Lead Angle VN 43 Insert

$382.14

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...
MWLN toolholder - Canela, FM Carbide

MWLNR204D Tool Holder 95° Lead Angle WNMG 43 Insert

$86.86

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
CTCPR204D Tool Holder — Canela, FM Carbide

CTCPR204D Tool Holder 90° Lead Angle TP 43 Insert

$113.81

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
S24U-DDUNR4N Boring Bar — Canela, FM Carbide

S24U-DDUNL4N Boring Bar 93° Lead Angle DN 43 Insert

$314.55

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...
WWLN boring bar - Canela, FM Carbide

S24U-WWLNR4 Boring Bar 95° Lead Angle WNMG 43 Insert

$285.91

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...
Canela DNMG442MFC 55 degree rhombic turning insert, grade TN15

DNMG 442 Turning Insert, MFC Chipbreaker, 0.031" Corner Radius, Grade TN15

$15.26

Canela reference DNMG442MFC — 55° rhombic turning insert, grade TN15. Original Canela indexable insert, 0.610" cutting edge and 0.031" corner radius. Sold individually, no minimum order.Specifications Reference: DNMG442MFC Insert shape: 55° rhombic (D) Clearance angle: 0° Chipbreaker: MFC Cutting edge length (l): 0.610" Thickness (T): 0.250" Inscribed circle (d): 0.500"...
Canela NG3156L Top Notch grooving insert, left hand

NG3156L Top Notch Grooving Insert, 0.156" Groove Width, Left Hand, Grade TN15

$32.52

Canela reference NG3156L — Top Notch grooving insert, left hand, grade TN15. Top Notch inserts clamp from the top, so you change the insert without taking the tool out of the turret. Sold individually, no minimum order.Specifications Reference: NG3156L Insert style: Top Notch insert for grooving Hand of insert: Left...
MVJNR864D Tool Holder — Canela, FM Carbide

MVJNL854D Tool Holder 93° Lead Angle VN 43 Insert

$126.81

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...