Search results

S40V-MCLNL4 Boring Bar 95° Lead Angle CN 43 Insert

$402.89 each

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...

SIMTHOL 24-4 Indexable Boring Bar for CNC Turning

$375.00 each

SIMTHOL 24-4 — boring bar, 1.50" bar diameter, 2.250" minimum bore, 14.0" overall length. Made in the USA by RMC Tooling. I.D. Threading & Shallow Grooving for Triangle TNMA Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a rigid...

S40V-MCLNR4 Boring Bar 95° Lead Angle CN 43 Insert

$402.89 each

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...

PSKNR20CA-12 Cartridge 75° Lead Angle SNMG 43 Insert

$201.68 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: PSKNR20CA-12 Dimension D: 2.756" Length (L): 2.756" Length (L1): 1.575" Width (b): 0.787" Dimension...

MWLNR204D Tool Holder 95° Lead Angle WNMG 43 Insert

$86.86 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

S32V-MDUNR4 Boring Bar 93° Lead Angle DN 43 Insert

$382.14 each

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...

MTGNL855D Tool Holder 90° Lead Angle TNM 54 Insert

$103.97 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MTRNL123B Tool Holder 75° Lead Angle TNM 33 Insert

$74.32 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

A32V-MDUNR4 Boring Bar 93° Lead Angle DN 43 Insert

$386.79 each

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...

SI-MTFNL 40-5 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts

$362.97 each

SI-MTFNL 40-5 — boring bar, 2.50" bar diameter, 3.062" minimum bore, 16.0" overall length. Made in the USA by RMC Tooling. 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a...

MTCNN443F Tool Holder 90° Lead Angle TNM 33 Insert

$94.61 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

S32V-CTFPL4 Boring Bar 90° Lead Angle TP 43 Insert

$336.39 each

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...

S24U-MDUNR4 Boring Bar 93° Lead Angle DN 43 Insert

$325.01 each

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...

MCLNR20CA-4C Cartridge 95° Lead Angle CN 43 Insert

$169.47 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MCLNR20CA-4C Dimension D: 2.756" Length (L): 2.756" Length (L1): 1.575" Width (b): 0.787" Dimension...

MCLNL204D Tool Holder 95° Lead Angle CN 43 Insert

$86.86 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

SIMTFNL 16-3 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts

$259.63 each

SIMTFNL 16-3 — boring bar, 1.00" bar diameter, 1.280" minimum bore, 12.0" overall length. Made in the USA by RMC Tooling. 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a...

MTANR123B Tool Holder 90° Lead Angle TNM 33 Insert

$74.32 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

S32V-MCLNL4 Boring Bar 95° Lead Angle CN 43 Insert

$336.39 each

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...

S20U-DDUNR4N Boring Bar 93° Lead Angle DN 43 Insert

$286.45 each

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...

SSKCL16CA-12 Cartridge 75° Lead Angle SC 43 Insert

$184.03 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: SSKCL16CA-12 Dimension D: 1.969" Length (L): 2.480" Length (L1): 2.480" Width (b): 0.689" Dimension...

DSRNL164DAN Tool Holder 75° Lead Angle SNM 43 Insert

$125.34 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

DDJNR164DAN Tool Holder 93° Lead Angle DN 43 Insert

$187.20 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

SCFCL12CA-12 Cartridge 90° Lead Angle CC 43 Insert

$184.03 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: SCFCL12CA-12 Dimension D: 1.575" Length (L): 1.850" Length (L1): 0.984" Width (b): 0.551" Dimension...

MCFNL20CA-4C Cartridge 90° Lead Angle CN 43 Insert

$169.47 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MCFNL20CA-4C Dimension D: 2.756" Length (L): 2.756" Length (L1): 1.575" Width (b): 0.787" Dimension...

MCKNL20CA-4C Cartridge 75° Lead Angle CN 43 Insert

$169.47 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MCKNL20CA-4C Dimension D: 2.756" Length (L): 2.756" Length (L1): 1.575" Width (b): 0.787" Dimension...

MTANL163D Tool Holder 90° Lead Angle TNM 33 Insert

$79.05 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MCKNR12CA-4C Cartridge 75° Lead Angle CN 43 Insert

$154.92 each

Face turning toolholder equipped with rhombic negative double-sided inserts (angle 80°) with strong cutting edge. The double clamping (pin + clamp) ensures good rigidity and stability in roughing applications. Specifications Model: MCKNR12CA-4C Dimension D: 1.969" Length (L): 2.165" Length (L1): 1.378" Width (b): 0.630" Dimension h: 0.787" Dimension h1: 0.472"...

MRGNR164D Tool Holder RNMG 43 Insert

$79.05 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

PSSNR20CA-12 Cartridge 45° Lead Angle SNMG 43 Insert

$201.68 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: PSSNR20CA-12 Dimension D: 2.756" Length (L): 2.362" Length (L1): 1.181" Width (b): 0.787" Dimension...

MTCNN 44-3F Tool Holder 0 Degree End Cutting Edge Angle for Negative Triangle TNM_Inserts

$247.19 each

MTCNN 44-3F — toolholder, 0.50" × 1.00" shank (width × height), 8.0" overall length. Made in the USA by RMC Tooling. 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference...

WWLNR124B Tool Holder 95° Lead Angle WNMG 43 Insert

$74.32 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

DWLNR244EAN Tool Holder 95° Lead Angle WNMG 43 Insert

$162.27 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

S20U-MWLNL4 Boring Bar 95° Lead Angle WNMG 43 Insert

$260.52 each

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...

MRGNL164D Tool Holder RNMG 43 Insert

$79.05 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

WWLNL244E Tool Holder 95° Lead Angle WNMG 43 Insert

$118.45 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

SIMTHOR 20-4 Indexable Boring Bar for CNC Turning

$346.17 each

SIMTHOR 20-4 — boring bar, 1.25" bar diameter, 1.812" minimum bore, 14.0" overall length. Made in the USA by RMC Tooling. I.D. Threading & Shallow Grooving for Triangle TNMA Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a rigid...

TNMG 331 CHIP BREAKER FMC GRADE TN15 / TNMG 160404 FMC TN15

$9.25 per insert$92.50 per box of 10

Canela reference TNMG331-FMC — triangular (T) turning insert, grade TN15. Original Canela indexable insert and 1/64" (0.4 mm) corner radius. Specifications Reference: TNMG331-FMC ISO designation: TNMG 160404 Insert shape: triangular (T) Clearance angle: 0° — negative (N) Chipbreaker: FMC Thickness (T): 3/16" (4.76 mm) Inscribed circle (d): 3/8" (9.52 mm)...

TNMG 332 CHIP BREAKER MHC GRADE TN30 / TNMG 160408 MHC TN30

$9.25 per insert$92.50 per box of 10

Canela reference TNMG332-MHC — triangular (T) turning insert, grade TN30. Original Canela indexable insert and 1/32" (0.79 mm) corner radius. Specifications Reference: TNMG332-MHC ISO designation: TNMG 160408 Insert shape: triangular (T) Clearance angle: 0° — negative (N) Chipbreaker: MHC Thickness (T): 3/16" (4.76 mm) Inscribed circle (d): 3/8" (9.52 mm)...

WWLNR244E Tool Holder 95° Lead Angle WNMG 43 Insert

$118.45 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat, and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MCFNR12CA-4C Cartridge 90° Lead Angle CN 43 Insert

$154.92 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MCFNR12CA-4C Dimension D: 1.969" Length (L): 2.165" Length (L1): 1.378" Width (b): 0.630" Dimension...

MCGNL164D Tool Holder 90° Lead Angle CN 43 Insert

$79.05 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

DSSNR204DN Tool Holder 45° Lead Angle SNM 43 Insert

$89.96 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MVJNR164D Tool Holder 93° Lead Angle VN 43 Insert

$123.17 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

SIMTJNR 20-3 -3° End Cutting Edge Angle for Negative Triangle TNM_ Inserts

$288.44 each

SIMTJNR 20-3 — boring bar, 1.25" bar diameter, 1.530" minimum bore, 14.0" overall length. Made in the USA by RMC Tooling. -3° End Cutting Edge Angle for Negative Triangle TNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a...

MTGNL123B Tool Holder 90° Lead Angle TNM 33 Insert

$74.32 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

S16T-DCLNR4N Boring Bar 95° Lead Angle CN 43 Insert

$268.26 each

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...

SNMG 433 CHIP BREAKER RC GRADE TN30 / SNMG 120412 RC TN30

$9.76 per insert$97.60 per box of 10

Canela reference SNMG433-RC — square (S) turning insert, grade TN30. Original Canela indexable insert and 3/64" (1.19 mm) corner radius. Specifications Reference: SNMG433-RC ISO designation: SNMG 120412 Insert shape: square (S) Clearance angle: 0° — negative (N) Chipbreaker: RC Thickness (T): 3/16" (4.76 mm) Inscribed circle (d): 1/2" (12.7 mm)...

DWLNR204DAN Tool Holder 95° Lead Angle WNMG 43 Insert

$137.81 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

TNMG 332 CHIP BREAKER MC GRADE TN15 / TNMG 160408 MC TN15

$9.25 per insert$92.50 per box of 10

Canela reference TNMG332-MC — triangular (T) turning insert, grade TN15. Original Canela indexable insert and 1/32" (0.79 mm) corner radius. Specifications Reference: TNMG332-MC ISO designation: TNMG 160408 Insert shape: triangular (T) Clearance angle: 0° — negative (N) Chipbreaker: MC Thickness (T): 3/16" (4.76 mm) Inscribed circle (d): 3/8" (9.52 mm)...

DCLNR164DN Tool Holder 95° Lead Angle CN 43 Insert

$81.60 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...