Search results

MCLNL 24-6E Indexable Turning Tool Holder, 1-1/2" Square Shank, 3/4" I.C. 80° Diamond Insert, Left Hand

$109.60 each

MCLNL 24-6E — toolholder, 1-1/2" square shank, 7.0" overall length. Made in the USA by RMC Tooling. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool goes back into the turret at the same cutting-point location...

MCLNL 16-6D Indexable Turning Tool Holder, 1" Square Shank, 80° Diamond Insert, Left Hand

$86.53 each

MCLNL 16-6D — toolholder, 1.000" square shank, 6.0" overall length. Made in the USA by RMC Tooling. -5° End or Side Cutting Edge Angle for Negative 80° Diamond CNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface,...

MCFNL 20-6D Tool Holder 0 End Cutting Edge Angle for Negative 80 Diamond CNM_ Inserts

$95.20 each

MCFNL 20-6D — toolholder, 1.25" square shank, 6.0" overall length. Made in the USA by RMC Tooling. 0° End Cutting Edge Angle for Negative 80° Diamond CNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the...

MCGNR 24-6E Tool Holder 0 End Cutting Edge Angle for Negative 80 Diamond CNM_ Inserts

$109.60 each

MCGNR 24-6E — toolholder, 1.50" square shank, 7.0" overall length. Made in the USA by RMC Tooling. 0° Side Cutting Edge Angle for Negative 80° Diamond CNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the...

MCFNR 24-6E Tool Holder 0 End Cutting Edge Angle for Negative 80 Diamond CNM_ Inserts

$109.60 each

MCFNR 24-6E — toolholder, 1.50" square shank, 7.0" overall length. Made in the USA by RMC Tooling. 0° End Cutting Edge Angle for Negative 80° Diamond CNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the...

MCRNR 86-6E Tool Holder 15 Side Cutting Edge Angle for Negative 80 Diamond CNM_Inserts

$77.44 each

MCRNR 86-6E — toolholder, 1.00" × 1.50" shank (width × height), 7.0" overall length. Made in the USA by RMC Tooling. 15° Side Cutting Edge Angle for Negative 80° Diamond CNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified...

MCLNR 86-6E Tool Holder -5 End Cutting Edge Angle for Negative 80 Diamond CNM_ Inserts

$92.32 each

MCLNR 86-6E — toolholder, 1.000" × 1.500" shank (width × height), 7.0" overall length. Made in the USA by RMC Tooling. -5° End or Side Cutting Edge Angle for Negative 80° Diamond CNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to...

CNMA 432 Turning Insert, 0.031" Corner Radius, Grade TK15

$10.83 per insert$108.30 per box of 10

Canela reference CNMA432 — 80° rhombic turning insert, grade TK15. Original Canela indexable insert, 0.508" cutting edge and 0.031" corner radius. Specifications Reference: CNMA432 Insert shape: 80° rhombic (C) Clearance angle: 0° Cutting edge length (l): 0.508" Thickness (T): 0.187" Inscribed circle (d): 0.500" Corner radius (r): 0.031" Grade: TK15...

MCYNN 20-6D Tool Holder 50 Side Cutting Edge Angle for Negative 80 Diamond CNM_Inserts

$95.20 each

MCYNN 20-6D — toolholder, 1.25" square shank, 6.0" overall length. Made in the USA by RMC Tooling. 50° Side Cutting Edge Angle for Negative 80° Diamond CNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the...

MCRNL 24-6D Indexable Turning Tool Holder, 1-1/2" Square Shank, 3/4" I.C. 80° Diamond Insert, Left Hand

$109.60 each

MCRNL 24-6D — toolholder, 1-1/2" square shank, 6.0" overall length. Made in the USA by RMC Tooling. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool goes back into the turret at the same cutting-point location...

MCKNL 24-6D Indexable Turning Tool Holder, 1-1/2" Square Shank, 80° Diamond Insert, Left Hand

$109.60 each

MCKNL 24-6D — toolholder, 1.50" square shank, 6.0" overall length. Made in the USA by RMC Tooling. 15° End Cutting Edge Angle for Negative 80° Diamond CNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the...

MCKNL 24-6E Indexable Turning Tool Holder, 1-1/2" Square Shank, 3/4" I.C. 80° Diamond Insert, Left Hand

$109.60 each

MCKNL 24-6E — toolholder, 1-1/2" square shank, 7.0" overall length. Made in the USA by RMC Tooling. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool goes back into the turret at the same cutting-point location...

MCRNR 24-6E Tool Holder 15 Side Cutting Edge Angle for Negative 80 Diamond CNM_Inserts

$109.60 each

MCRNR 24-6E — toolholder, 1.50" square shank, 7.0" overall length. Made in the USA by RMC Tooling. 15° Side Cutting Edge Angle for Negative 80° Diamond CNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the...

MCGNR 20-6D Tool Holder 0 End Cutting Edge Angle for Negative 80 Diamond CNM_ Inserts

$95.20 each

MCGNR 20-6D — toolholder, 1.25" square shank, 6.0" overall length. Made in the USA by RMC Tooling. 0° Side Cutting Edge Angle for Negative 80° Diamond CNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the...

CNMA 160612 Grade FM2533 / CNMA 543 #FMCarbide

$10.73 per insert$107.30 per box of 10

CNMA 160612 / CNMA 543, grade FM2533 — negative 80° rhombic turning insert.5/8" inscribed circle, 1/4" thick, 3/64" corner radius. FM2533 is a CVD grade — stable steel applications and nodular cast iron — a balance of wear resistance and chipping resistance.Specifications Insert designation (ISO): CNMA 160612 Insert designation (inch):...

MCFNR 20-6D Tool Holder 0 End Cutting Edge Angle for Negative 80 Diamond CNM_ Inserts

$95.20 each

MCFNR 20-6D — toolholder, 1.25" square shank, 6.0" overall length. Made in the USA by RMC Tooling. 0° End Cutting Edge Angle for Negative 80° Diamond CNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the...

MCYNN 24-6D Indexable Turning Tool Holder, 1-1/2" Square Shank, 3/4" I.C. 80° Diamond Insert, Neutral

$109.60 each

MCYNN 24-6D — toolholder, 1-1/2" square shank, 6.0" overall length. Made in the USA by RMC Tooling. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool goes back into the turret at the same cutting-point location...

MCKNL 16-6D Indexable Turning Tool Holder, 1" Square Shank, 80° Diamond Insert, Left Hand

$86.53 each

MCKNL 16-6D — toolholder, 1.00" square shank, 6.0" overall length. Made in the USA by RMC Tooling. 15° End Cutting Edge Angle for Negative 80° Diamond CNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the...

CNMA 120412 Grade FM2533 / CNMA 433 #FMCarbide

$5.78 per insert$57.80 per box of 10

CNMA 120412 / CNMA 433, grade FM2533 — negative 80° rhombic turning insert.1/2" inscribed circle, 3/16" thick, 3/64" corner radius. FM2533 is a CVD grade — stable steel applications and nodular cast iron — a balance of wear resistance and chipping resistance.Specifications Insert designation (ISO): CNMA 120412 Insert designation (inch):...

MCLNL 20-6E Indexable Turning Tool Holder, 1-1/4" Square Shank, 3/4" I.C. 80° Diamond Insert, Left Hand

$95.20 each

MCLNL 20-6E — toolholder, 1-1/4" square shank, 7.0" overall length. Made in the USA by RMC Tooling. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool goes back into the turret at the same cutting-point location...

MCRNL 86-6D Indexable Turning Tool Holder, 1" Square Shank, 3/4" I.C. 80° Diamond Insert, Left Hand

$136.93 each

MCRNL 86-6D — toolholder, 1" × 1-1/2" rectangular shank, 6.0" overall length. Made in the USA by RMC Tooling. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool goes back into the turret at the same...

MCLNR 24-6E Indexable Turning Tool Holder, 1-1/2" Square Shank, 3/4" I.C. 80° Diamond Insert, Right Hand

$109.60 each

MCLNR 24-6E — toolholder, 1-1/2" square shank, 7.0" overall length. Made in the USA by RMC Tooling. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool goes back into the turret at the same cutting-point location...

MCKNL 20-6E Indexable Turning Tool Holder, 1-1/4" Square Shank, 3/4" I.C. 80° Diamond Insert, Left Hand

$95.20 each

MCKNL 20-6E — toolholder, 1-1/4" square shank, 7.0" overall length. Made in the USA by RMC Tooling. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool goes back into the turret at the same cutting-point location...

MCFNL 20-6E Indexable Turning Tool Holder, 1-1/4" Square Shank, 3/4" I.C. 80° Diamond Insert, Left Hand

$105.96 each

MCFNL 20-6E — toolholder, 1-1/4" square shank, 7.0" overall length. Made in the USA by RMC Tooling. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool goes back into the turret at the same cutting-point location...

MCLNR 16-6D Indexable Turning Tool Holder, 1" Square Shank, 80° Diamond Insert, Right Hand

$86.53 each

MCLNR 16-6D — toolholder, 1.000" square shank, 6.0" overall length. Made in the USA by RMC Tooling. -5° End or Side Cutting Edge Angle for Negative 80° Diamond CNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface,...

MCGNR 24-6D Indexable Turning Tool Holder, 1-1/2" Square Shank, 3/4" I.C. 80° Diamond Insert, Right Hand

$109.60 each

MCGNR 24-6D — toolholder, 1-1/2" square shank, 6.0" overall length. Made in the USA by RMC Tooling. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool goes back into the turret at the same cutting-point location...

MCFNR 24-6D Indexable Turning Tool Holder, 1-1/2" Square Shank, 3/4" I.C. 80° Diamond Insert, Right Hand

$109.60 each

MCFNR 24-6D — toolholder, 1-1/2" square shank, 6.0" overall length. Made in the USA by RMC Tooling. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool goes back into the turret at the same cutting-point location...

MCKNL 20-6D Indexable Turning Tool Holder, 1-1/4" Square Shank, 80° Diamond Insert, Left Hand

$95.20 each

MCKNL 20-6D — toolholder, 1.25" square shank, 6.0" overall length. Made in the USA by RMC Tooling. 15° End Cutting Edge Angle for Negative 80° Diamond CNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the...

MCKNR 24-6E Indexable Turning Tool Holder, 1-1/2" Square Shank, 3/4" I.C. 80° Diamond Insert, Right Hand

$109.60 each

MCKNR 24-6E — toolholder, 1-1/2" square shank, 7.0" overall length. Made in the USA by RMC Tooling. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool goes back into the turret at the same cutting-point location...

MCKNR 16-6D Indexable Turning Tool Holder, 1" Square Shank, 80° Diamond Insert, Right Hand

$86.53 each

MCKNR 16-6D — toolholder, 1.00" square shank, 6.0" overall length. Made in the USA by RMC Tooling. 15° End Cutting Edge Angle for Negative 80° Diamond CNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the...

MCRNR 24-6D Indexable Turning Tool Holder, 1-1/2" Square Shank, 3/4" I.C. 80° Diamond Insert, Right Hand

$109.60 each

MCRNR 24-6D — toolholder, 1-1/2" square shank, 6.0" overall length. Made in the USA by RMC Tooling. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool goes back into the turret at the same cutting-point location...

MCLNR 20-6D Indexable Turning Tool Holder, 1-1/4" Square Shank, 80° Diamond Insert, Right Hand

$95.20 each

MCLNR 20-6D — toolholder, 1.250" square shank, 6.0" overall length. Made in the USA by RMC Tooling. -5° End or Side Cutting Edge Angle for Negative 80° Diamond CNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface,...

MCRNL 20-6D Indexable Turning Tool Holder, 1-1/4" Square Shank, 80° Diamond Insert, Left Hand

$95.20 each

MCRNL 20-6D — toolholder, 1.25" square shank, 6.0" overall length. Made in the USA by RMC Tooling. 15° Side Cutting Edge Angle for Negative 80° Diamond CNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the...

MCRNL 20-6E Indexable Turning Tool Holder, 1-1/4" Square Shank, 3/4" I.C. 80° Diamond Insert, Left Hand

$95.20 each

MCRNL 20-6E — toolholder, 1-1/4" square shank, 7.0" overall length. Made in the USA by RMC Tooling. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool goes back into the turret at the same cutting-point location...

CNMA 120404 Grade FM2533 / CNMA 431 #FMCarbide

$5.78 per insert$57.80 per box of 10

CNMA 120404 / CNMA 431, grade FM2533 — negative 80° rhombic turning insert.1/2" inscribed circle, 3/16" thick, 1/64" corner radius. FM2533 is a CVD grade — stable steel applications and nodular cast iron — a balance of wear resistance and chipping resistance.Specifications Insert designation (ISO): CNMA 120404 Insert designation (inch):...

MCLNR 20-6E Indexable Turning Tool Holder, 1-1/4" Square Shank, 3/4" I.C. 80° Diamond Insert, Right Hand

$95.20 each

MCLNR 20-6E — toolholder, 1-1/4" square shank, 7.0" overall length. Made in the USA by RMC Tooling. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool goes back into the turret at the same cutting-point location...

MCKNR 20-6E Indexable Turning Tool Holder, 1-1/4" Square Shank, 3/4" I.C. 80° Diamond Insert, Right Hand

$95.20 each

MCKNR 20-6E — toolholder, 1-1/4" square shank, 7.0" overall length. Made in the USA by RMC Tooling. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool goes back into the turret at the same cutting-point location...

CNMA 433 Turning Insert, 0.047" Corner Radius, Grade TK15

$10.83 per insert$108.30 per box of 10

Canela reference CNMA433 — 80° rhombic turning insert, grade TK15. Original Canela indexable insert, 0.508" cutting edge and 0.047" corner radius. Specifications Reference: CNMA433 Insert shape: 80° rhombic (C) Clearance angle: 0° Cutting edge length (l): 0.508" Thickness (T): 0.187" Inscribed circle (d): 0.500" Corner radius (r): 0.047" Grade: TK15...

MCRNR 86-6D Indexable Turning Tool Holder, 1" Square Shank, 3/4" I.C. 80° Diamond Insert, Right Hand

$136.93 each

MCRNR 86-6D — toolholder, 1" × 1-1/2" rectangular shank, 6.0" overall length. Made in the USA by RMC Tooling. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool goes back into the turret at the same...

MCKNR 20-6D Indexable Turning Tool Holder, 1-1/4" Square Shank, 80° Diamond Insert, Right Hand

$95.20 each

MCKNR 20-6D — toolholder, 1.25" square shank, 6.0" overall length. Made in the USA by RMC Tooling. 15° End Cutting Edge Angle for Negative 80° Diamond CNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the...

MCRNR 20-6D Indexable Turning Tool Holder, 1-1/4" Square Shank, 80° Diamond Insert, Right Hand

$95.20 each

MCRNR 20-6D — toolholder, 1.25" square shank, 6.0" overall length. Made in the USA by RMC Tooling. 15° Side Cutting Edge Angle for Negative 80° Diamond CNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the...

MCRNR 20-6E Indexable Turning Tool Holder, 1-1/4" Square Shank, 3/4" I.C. 80° Diamond Insert, Right Hand

$95.20 each

MCRNR 20-6E — toolholder, 1-1/4" square shank, 7.0" overall length. Made in the USA by RMC Tooling. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool goes back into the turret at the same cutting-point location...

CNMA 120408 Chip Breaker BC Grade FM524 / CNMA 432 BC #FMCarbide

$8.32 per insert$83.20 per box of 10

CNMA 120408 / CNMA 432, chip breaker BC, grade FM524 — negative 80° rhombic turning insert.1/2" inscribed circle, 3/16" thick, 1/32" corner radius. The BC breaker is the medium roughing & cast iron geometry: 0.008–0.020 ipr (0.2–0.5 mm/rev) at 0.06–0.16" (1.5–4 mm) depth of cut. FM524 is a CVD grade...

RMC Insert Shims — Models B SSQ-16-3 to ISSN-623

$7.46 each

Replacement shims and shim seats for indexable turning and milling tool holders are available. The shim protects the holder pocket from insert breakage—replacing a worn shim is far cheaper than replacing the holder. Covers the common negative and positive insert geometries (CNMG, DNMG, SNMG, TNMG, WNMG, VNMG, and more—match the...

CNMG 432 CHIP BREAKER RC GRADE TN15 / CNMG 120408 RC TN15

$9.97 per insert$99.70 per box of 10

Canela reference CNMG432-RC — 80° rhombic (C) turning insert, grade TN15. Original Canela indexable insert and 1/32" (0.79 mm) corner radius. Specifications Reference: CNMG432-RC ISO designation: CNMG 120408 Insert shape: 80° rhombic (C) Clearance angle: 0° — negative (N) Chipbreaker: RC Thickness (T): 3/16" (4.76 mm) Inscribed circle (d): 1/2"...

CNMG 432 CHIP BREAKER RC GRADE TN30 / CNMG 120408 RC TN30

$9.97 per insert$99.70 per box of 10

Canela reference CNMG432-RC — 80° rhombic (C) turning insert, grade TN30. Original Canela indexable insert and 1/32" (0.79 mm) corner radius. Specifications Reference: CNMG432-RC ISO designation: CNMG 120408 Insert shape: 80° rhombic (C) Clearance angle: 0° — negative (N) Chipbreaker: RC Thickness (T): 3/16" (4.76 mm) Inscribed circle (d): 1/2"...

CNMG 432 CHIP BREAKER MC GRADE TN30 / CNMG 120408 MC TN30

$9.97 per insert$99.70 per box of 10

Canela reference CNMG432-MC — 80° rhombic (C) turning insert, grade TN30. Original Canela indexable insert and 1/32" (0.79 mm) corner radius. Specifications Reference: CNMG432-MC ISO designation: CNMG 120408 Insert shape: 80° rhombic (C) Clearance angle: 0° — negative (N) Chipbreaker: MC Thickness (T): 3/16" (4.76 mm) Inscribed circle (d): 1/2"...

CNMG 432 CHIP BREAKER MC GRADE TN35 / CNMG 120408 MC TN35

$9.97 per insert$99.70 per box of 10

Canela reference CNMG432-MC — 80° rhombic (C) turning insert, grade TN35. Original Canela indexable insert and 1/32" (0.79 mm) corner radius. Specifications Reference: CNMG432-MC ISO designation: CNMG 120408 Insert shape: 80° rhombic (C) Clearance angle: 0° — negative (N) Chipbreaker: MC Thickness (T): 3/16" (4.76 mm) Inscribed circle (d): 1/2"...

CNMG 432 CHIP BREAKER MC GRADE TN15 / CNMG 120408 MC TN15

$9.97 per insert$99.70 per box of 10

Canela reference CNMG432-MC — 80° rhombic (C) turning insert, grade TN15. Original Canela indexable insert and 1/32" (0.79 mm) corner radius. Specifications Reference: CNMG432-MC ISO designation: CNMG 120408 Insert shape: 80° rhombic (C) Clearance angle: 0° — negative (N) Chipbreaker: MC Thickness (T): 3/16" (4.76 mm) Inscribed circle (d): 1/2"...

RMC Insert Shims — Models ISSN-632 to MTN-334

$7.46 each

Replacement shims and shim seats for indexable turning and milling tool holders. The shim protects the holder pocket from insert breakage — replacing a worn shim is far cheaper than replacing the holder. Covers the common negative and positive insert geometries (CNMG, DNMG, SNMG, TNMG, WNMG, VNMG and more —...